1. 24 Nov, 2019 1 commit
  2. 25 Aug, 2019 1 commit
  3. 02 Aug, 2019 1 commit
    • Simon Glass's avatar
      Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig · 37304aaf
      Simon Glass authored
      This converts the following to Kconfig:
      Both are together in one commit, since otherwise the former causes kconfig
      to define the latter, which gives duplicate symbol errors.
      Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
      backslash lands in the wrong place. Similarly with socfpga_vining_fpga.
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
  4. 30 Apr, 2019 1 commit
  5. 07 Jan, 2019 1 commit
  6. 02 Dec, 2018 1 commit
  7. 03 Sep, 2018 1 commit
  8. 17 Aug, 2018 1 commit
  9. 16 Aug, 2018 1 commit
    • Tom Rini's avatar
      configs: Migrate CONFIG_NR_DRAM_BANKS · 86cf1c82
      Tom Rini authored
      We have the following cases:
      - CONFIG_NR_DRAM_BANKS was defined, migrate normally
      - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
        CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
      - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
        2), set this to 8.
      Signed-off-by: default avatarTom Rini <trini@konsulko.com>
  10. 09 Apr, 2018 1 commit
  11. 08 Apr, 2018 1 commit
  12. 05 Apr, 2018 1 commit
  13. 11 Feb, 2018 2 commits
  14. 06 Feb, 2018 1 commit
    • Tuomas Tynkkynen's avatar
      cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA · a4fa8114
      Tuomas Tynkkynen authored
      cmd/Makefile has:
      ifdef CONFIG_FPGA
      obj-$(CONFIG_CMD_FPGA) += fpga.o
      which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
      does nothing. Let's remove that Makefile conditional and instead express
      this equivalent dependency in Kconfig, so a lot of redundant
       # CONFIG_CMD_FPGA is not set
      can be removed from board defconfigs that don't actually have an FPGA.
      Signed-off-by: default avatarTuomas Tynkkynen <tuomas@tuxera.com>
  15. 28 Jan, 2018 1 commit
    • Alexander Graf's avatar
      bcm283x: Add pinctrl driver · caf2233b
      Alexander Graf authored
      The bcm283x family of SoCs have a GPIO controller that also acts as
      pinctrl controller.
      This patch introduces a new pinctrl driver that can actually properly mux
      devices into their device tree defined pin states and is now the primary
      owner of the gpio device. The previous GPIO driver gets moved into a
      subdevice of the pinctrl driver, bound to the same OF node.
      That way whenever a device asks for pinctrl support, it gets it
      automatically from the pinctrl driver and GPIO support is still available
      in the normal command line phase.
      Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
  16. 10 Oct, 2017 1 commit
    • Tuomas Tynkkynen's avatar
      cmd: Toggle the default value of CONFIG_CMD_IMLS · ad12dc18
      Tuomas Tynkkynen authored
      Having this as a 'default y' is rather annoying because it doesn't
      actually compile unless other options are defined in the board header:
      ../cmd/bootm.c: In function 'do_imls_nor':
      ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
         i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
      Make it 'default n' so people who develop new boards that start from a
      blank defconfig have one less compilation failure to debug.
      Signed-off-by: default avatarTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
  17. 27 Sep, 2017 1 commit
  18. 08 Sep, 2017 3 commits
  19. 07 Sep, 2017 1 commit
  20. 01 Sep, 2017 1 commit
    • Tom Rini's avatar
      configs: Migrate all of the existing USB symbols, except fastboot · ecad7051
      Tom Rini authored
      This syncs all of the currently Kconfig'd symbols out of the headers and
      into the defconfig files.  This has two exceptions, first am335x_evm
      needs to be converted to DM in SPL and then it can stop undef'ing
      CONFIG_DM_USB.  Leaving this as-is results in a build failure, and
      without work, run time failure.  The other case is am43xx_evm.h and in
      turn am43xx_evm_usbhost_boot.  The problem here is that we need DWC3 USB
      host mode in SPL, but still desire to have gadget mode in U-Boot proper.
      Signed-off-by: default avatarTom Rini <trini@konsulko.com>
  21. 28 Aug, 2017 1 commit
  22. 26 Aug, 2017 1 commit
  23. 15 Aug, 2017 1 commit
  24. 31 Jul, 2017 1 commit
  25. 11 Jul, 2017 1 commit
  26. 10 Jul, 2017 1 commit
  27. 06 Jul, 2017 1 commit
  28. 10 May, 2017 5 commits
  29. 30 Apr, 2017 1 commit
  30. 29 Dec, 2016 2 commits
    • Masahiro Yamada's avatar
      mmc: move some SDHCI related options to Kconfig · 45a68fe2
      Masahiro Yamada authored
      While I moved the options, I also renamed them so that they are all
      prefixed with MMC_SDHCI_.
      This commit was created in the following steps.
      [1] Rename with the following command
      find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
      -type f -print | xargs sed -i -e '
      [2] create the Kconfig entries in drivers/mmc/Kconfig
      [3] Move the options by the following command
      tools/moveconfig.py -y MMC_SDHCI_SDMA MMC_SDHCI_BCM2835 \
      [4] Sort drivers/mmc/Makefile for readability
      Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      Reviewed-by: default avatarTom Rini <trini@konsulko.com>
      Reviewed-by: default avatarJaehoon Chung <jh80.chung@samsung.com>
    • Masahiro Yamada's avatar
      mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI · e1ce61fb
      Masahiro Yamada authored
      Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI.
      My motivation for the rename is, ultimately, to make all the MMC
      options prefixed with MMC_ and SDHCI options with MMC_SDHCI_,
      like Linux.
      This commit was created as follows:
      [1] Rename the config option with the following command:
      find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
      -type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g'
      [2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig
      [3] run "tools/moveconfig.py -y MMC_SDHCI"
      [4] add "depends on MMC_SDHCI" to existing SDHCI driver entries
      Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      Reviewed-by: default avatarTom Rini <trini@konsulko.com>
      Reviewed-by: default avatarJaehoon Chung <jh80.chung@samsung.com>
  31. 03 Dec, 2016 1 commit
  32. 29 Nov, 2016 1 commit