- Jul 07, 2021
-
-
Benjamin Gaignard authored
Split the VPU node in two: one for G1 and one for G2 since they are different hardware blocks. Add syscon for the hardware control block. Remove the reg-names property that is useless. Each VPU node only needs one interrupt. Change G2 assigned clock to match the specification. In both nodes all the clocks need to be assigned to make sure that the control block will be correctly clocked even if only one device node is enabled. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
-
Benjamin Gaignard authored
Use power domain sub-system to manage the control hardware block instead of an anonymous syscon Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
-
Benjamin Gaignard authored
The IMX8MQ SoC has vpumix BLK-CTL to control G1 and G2 VPU. Add definitions for these two sub-domains Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
-
Benjamin Gaignard authored
On SoC like IMX8MQ additional registers called fuses need to be set to enable some hardware blocks. Add new fields and a new macro to set these fuses registers. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
-
- Jul 02, 2021
-
-
The i.MX8MM SoC has dispmix BLK-CTL and vpumix BLK-CTL, so we add that support in this driver. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
-
The i.MX8MM introduces an IP named BLK_CTL and usually is comprised of some GPRs. The GPRs has some clock bits and reset bits, but here we take it as virtual PDs, because of the clock and power domain A/B lock issue when taking it as a clock controller. For some bits, it might be good to also make it as a reset controller, but to i.MX8MM, we not add that support for now. Signed-off-by: Peng Fan <peng.fan@nxp.com>
-
Document the i.MX BLK_CTL with its devicetree properties. Each BLK CTL have different power domain inputs and they have different names, so we are not able to list all the power domain names for each BLK CTL here. For example: i.MX8MM dispmix BLK CTL, it has power-domains = <&pgc_dispmix>, <&pgc_mipi>; power-domain-names = "dispmix", "mipi"; vpumix BLK CTL, it has power-domains = <&vpumix_pd>, <&vpu_g1_pd>, <&vpu_g2_pd>, <&vpu_h1_pd>; power-domain-names = "vpumix", "g1", "g2", "h1"; Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Peng Fan <peng.fan@nxp.com>
-
Adding the defines for i.MX8MM BLK-CTL power domains. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Rob Herring <robh@kernel.org>
-
- Jul 01, 2021
-
-
Stephen Rothwell authored
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Rothwell authored
-
Aneesh Kumar K.V authored
mremap HAVE_MOVE_PMD/PUD optimization time comparison for 1GB region: 1GB mremap - Source PTE-aligned, Destination PTE-aligned mremap time: 2292772ns 1GB mremap - Source PMD-aligned, Destination PMD-aligned mremap time: 1158928ns 1GB mremap - Source PUD-aligned, Destination PUD-aligned mremap time: 63886ns Link: https://lkml.kernel.org/r/20210616045735.374532-4-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
flush_tlb_range is special in that we don't specify the page size used for the translation. Hence when flushing TLB we flush the translation cache for all possible page sizes. The kernel also uses the same interface when moving page tables around. Such a move requires us to flush the page walk cache. Instead of adding another interface to force page walk cache flush, update flush_tlb_range to flush page walk cache if the range flushed is more than the PMD range. A page table move will always involve an invalidate range more than PMD_SIZE. Running microbenchmark with mprotect and parallel memory access didn't show any observable performance impact. Link: https://lkml.kernel.org/r/20210616045735.374532-3-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
Patch series "Speedup mremap on ppc64", v8. This patchset enables MOVE_PMD/MOVE_PUD support on power. This requires the platform to support updating higher-level page tables without updating page table entries. This also needs to invalidate the Page Walk Cache on architecture supporting the same. This patch (of 3): Architectures like ppc64 support faster mremap only with radix translation. Hence allow a runtime check w.r.t support for fast mremap. Link: https://lkml.kernel.org/r/20210616045735.374532-1-aneesh.kumar@linux.ibm.com Link: https://lkml.kernel.org/r/20210616045735.374532-2-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
To avoid a race between rmap walk and mremap, mremap does take_rmap_locks(). The lock was taken to ensure that rmap walk don't miss a page table entry due to PTE moves via move_pagetables(). The kernel does further optimization of this lock such that if we are going to find the newly added vma after the old vma, the rmap lock is not taken. This is because rmap walk would find the vmas in the same order and if we don't find the page table attached to older vma we would find it with the new vma which we would iterate later. As explained in commit eb66ae03 ("mremap: properly flush TLB before releasing the page") mremap is special in that it doesn't take ownership of the page. The optimized version for PUD/PMD aligned mremap also doesn't hold the ptl lock. This can result in stale TLB entries as show below. This patch updates the rmap locking requirement in mremap to handle the race condition explained below with optimized mremap:: Optmized PMD move CPU 1 CPU 2 CPU 3 mremap(old_addr, new_addr) page_shrinker/try_to_unmap_one mmap_write_lock_killable() addr = old_addr lock(pte_ptl) lock(pmd_ptl) pmd = *old_pmd pmd_clear(old_pmd) flush_tlb_range(old_addr) *new_pmd = pmd *new_addr = 10; and fills TLB with new addr and old pfn unlock(pmd_ptl) ptep_clear_flush() old pfn is free. Stale TLB entry Optimized PUD move also suffers from a similar race. Both the above race condition can be fixed if we force mremap path to take rmap lock. Link: https://lkml.kernel.org/r/20210616045239.370802-7-aneesh.kumar@linux.ibm.com Fixes: 2c91bd4a ("mm: speed up mremap by 20x on large regions") Fixes: c49dd340 ("mm: speedup mremap on 1GB or larger regions") Link: https://lore.kernel.org/linux-mm/CAHk-=wgXVR04eBNtxQfevontWnP6FDm+oj5vauQXP3S-huwbPw@mail.gmail.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
pmd/pud_populate is the right interface to be used to set the respective page table entries. Some architectures like ppc64 do assume that set_pmd/pud_at can only be used to set a hugepage PTE. Since we are not setting up a hugepage PTE here, use the pmd/pud_populate interface. Link: https://lkml.kernel.org/r/20210616045239.370802-6-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
With two level page table don't enable move_normal_pud. Link: https://lkml.kernel.org/r/20210616045239.370802-5-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
x86_64-linux-gnu-ld: mm/mremap.o: in function `move_pgt_entry': mremap.c:(.text+0x763): undefined reference to `__compiletime_assert_342' make[1]: *** [/builds/linux/Makefile:1252: vmlinux] Error 1 This build failure is introduced by commit. 06b8db69ef5 ("mm/mremap: convert huge PUD move to separate helper") Link: https://lore.kernel.org/lkml/YMuOSnJsL9qkxweY@archlinux-ax161 Link: https://lkml.kernel.org/r/20210619134310.89098-1-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
With TRANSPARENT_HUGEPAGE_PUD enabled the kernel can find huge PUD entries. Add a helper to move huge PUD entries on mremap(). This will be used by a later patch to optimize mremap of PUD_SIZE aligned level 4 PTE mapped address This also make sure we support mremap on huge PUD entries even with CONFIG_HAVE_MOVE_PUD disabled. Link: https://lkml.kernel.org/r/20210616045239.370802-4-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
With a large mmap map size, we can overlap with the text area and using MAP_FIXED results in unmapping that area. Switch to MAP_FIXED_NOREPLACE and handle the EEXIST error. Link: https://lkml.kernel.org/r/20210616045239.370802-3-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Kalesh Singh <kaleshsingh@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
Patch series "mrermap fixes", v2. This patch (of 6): Instead of hardcoding 4K page size fetch it using sysconf(). For the performance measurements test still assume 2M and 1G are hugepage sizes. Link: https://lkml.kernel.org/r/20210616045239.370802-1-aneesh.kumar@linux.ibm.com Link: https://lkml.kernel.org/r/20210616045239.370802-2-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Kalesh Singh <kaleshsingh@google.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
m68k build error reported by kernel robot. We may want to fixup pgd_page_vaddr correctly later. pgd_page_vaddr() gets cast to different pointer types based on architecture. But for now this should work? This ensure we keep the pgd_page_vaddr() same as before. Link: https://lkml.kernel.org/r/87tulxnb2v.fsf@linux.ibm.com Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
No functional change in this patch. Link: https://lkml.kernel.org/r/20210615110859.320299-2-aneesh.kumar@linux.ibm.com Link: https://lore.kernel.org/linuxppc-dev/CAHk-=wi+J+iodze9FtjM3Zi4j4OeS+qqbKxME9QN4roxPEXH9Q@mail.gmail.com/ Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Rothwell authored
Link: https://lkml.kernel.org/r/20210619134410.89559-1-aneesh.kumar@linux.ibm.com Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
Link: https://lkml.kernel.org/r/87wnqtnb60.fsf@linux.ibm.com Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Aneesh Kumar K.V authored
No functional change in this patch. Link: https://lkml.kernel.org/r/20210615110859.320299-1-aneesh.kumar@linux.ibm.com Link: https://lore.kernel.org/linuxppc-dev/CAHk-=wi+J+iodze9FtjM3Zi4j4OeS+qqbKxME9QN4roxPEXH9Q@mail.gmail.com/ Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Boyd authored
We can use the vmlinux_build_id array here now instead of open coding it. This mostly consolidates code. Link: https://lkml.kernel.org/r/20210511003845.2429846-14-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Boyd authored
Kernel doc should use "Return:" instead of "Returns" to properly reflect the return values. Link: https://lkml.kernel.org/r/20210511003845.2429846-13-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Boyd authored
These arguments are never modified so they can be marked const to indicate as such. Link: https://lkml.kernel.org/r/20210511003845.2429846-12-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Boyd authored
Add "auto" to the usage message so that it's a little clearer that you can pass "auto" as the second argument. When passing "auto" the script tries to find the base path automatically instead of requiring it be passed on the commandline. Also use [<variable>] to indicate the variable argument and that it is optional so that we can differentiate from the literal "auto" that should be passed. Link: https://lkml.kernel.org/r/20210511003845.2429846-11-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Sasha Levin <sashal@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Boyd authored
Sometimes if you're using tools that have linked things improperly or have new features/sections that older tools don't expect you'll see warnings printed to stderr. We don't really care about these warnings, so let's just silence these messages to cleanup output of this script. Link: https://lkml.kernel.org/r/20210511003845.2429846-10-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Sasha Levin <sashal@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Boyd authored
Now that stacktraces contain the build ID information we can update this script to use debuginfod-find to locate the debuginfo for the vmlinux and modules automatically. This can replace the existing code that requires specifying a path to vmlinux or tries to find the vmlinux and modules automatically by using the release number. Work it into the script as a fallback option if the vmlinux isn't specified on the commandline. Link: https://lkml.kernel.org/r/20210511003845.2429846-9-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Sasha Levin <sashal@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Boyd authored
Let's use the new printk formats to print the stacktrace entries when printing a backtrace to the kernel logs. This will include any module's build ID[1] in it so that offline/crash debugging can easily locate the debuginfo for a module via something like debuginfod[2]. Link: https://lkml.kernel.org/r/20210511003845.2429846-8-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Boyd authored
Let's use the new printk format to print the stacktrace entry when printing a backtrace to the kernel logs. This will include any module's build ID[1] in it so that offline/crash debugging can easily locate the debuginfo for a module via something like debuginfod[2]. Link: https://lkml.kernel.org/r/20210511003845.2429846-7-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Bixuan Cui authored
Fix build error when disable CONFIG_SYSFS: kernel/module.c:2805:8: error: implicit declaration of function `sect_empty'; did you mean `desc_empty'? [-Werror=implicit-function-declaration] 2805 | if (!sect_empty(sechdr) && sechdr->sh_type == SHT_NOTE && Link: https://lkml.kernel.org/r/20210525105049.34804-1-cuibixuan@huawei.com Fixes: 9ee6682aa528 ("module: add printk formats to add module build ID to stacktraces") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Andrew Morton authored
make kallsyms_lookup_buildid() static warning: no previous prototype for 'kallsyms_lookup_buildid' [-Wmissing-prototypes] Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Randy Dunlap authored
Omit the static_assert() when CONFIG_MODULES is not set/enabled. Fixes these build errors: ../kernel/kallsyms.c: In function `__sprint_symbol': ../include/linux/kernel.h:53:43: error: dereferencing pointer to incomplete type `struct module' #define typeof_member(T, m) typeof(((T*)0)->m) ^ ../include/linux/build_bug.h:78:41: error: static assertion failed: "sizeof(typeof_member(struct module, build_id)) == 20" #define __static_assert(expr, msg, ...) _Static_assert(expr, msg) ^ ../kernel/kallsyms.c:454:4: note: in expansion of macro `static_assert' static_assert(sizeof(typeof_member(struct module, build_id)) == 20); ^~~~~~~~~~~~~ Link: https://lkml.kernel.org/r/20210513171510.20328-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Andrew Morton authored
fix build with CONFIG_MODULES=n, tweak code layout Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Boyd authored
Let's make kernel stacktraces easier to identify by including the build ID[1] of a module if the stacktrace is printing a symbol from a module. This makes it simpler for developers to locate a kernel module's full debuginfo for a particular stacktrace. Combined with scripts/decode_stracktrace.sh, a developer can download the matching debuginfo from a debuginfod[2] server and find the exact file and line number for the functions plus offsets in a stacktrace that match the module. This is especially useful for pstore crash debugging where the kernel crashes are recorded in something like console-ramoops and the recovery kernel/modules are different or the debuginfo doesn't exist on the device due to space concerns (the debuginfo can be too large for space limited devices). Originally, I put this on the %pS format, but that was quickly rejected given that %pS is used in other places such as ftrace where build IDs aren't meaningful. There was some discussions on the list to put every module build ID into the "Modules linked in:" section of the stacktrace message but that quickly becomes very hard to read once you have more than three or four modules linked in. It also provides too much information when we don't expect each module to be traversed in a stacktrace. Having the build ID for modules that aren't important just makes things messy. Splitting it to multiple lines for each module quickly explodes the number of lines printed in an oops too, possibly wrapping the warning off the console. And finally, trying to stash away each module used in a callstack to provide the ID of each symbol printed is cumbersome and would require changes to each architecture to stash away modules and return their build IDs once unwinding has completed. Instead, we opt for the simpler approach of introducing new printk formats '%pS[R]b' for "pointer symbolic backtrace with module build ID" and '%pBb' for "pointer backtrace with module build ID" and then updating the few places in the architecture layer where the stacktrace is printed to use this new format. Before: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm] direct_entry+0x16c/0x1b4 [lkdtm] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 After: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] direct_entry+0x16c/0x1b4 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 Link: https://lkml.kernel.org/r/20210511003845.2429846-6-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Sasha Levin <sashal@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Boyd authored
Add the running kernel's build ID[1] to the stacktrace information header. This makes it simpler for developers to locate the vmlinux with full debuginfo for a particular kernel stacktrace. Combined with scripts/decode_stracktrace.sh, a developer can download the correct vmlinux from a debuginfod[2] server and find the exact file and line number for the functions plus offsets in a stacktrace. This is especially useful for pstore crash debugging where the kernel crashes are recorded in the pstore logs and the recovery kernel is different or the debuginfo doesn't exist on the device due to space concerns (the data can be large and a security concern). The stacktrace can be analyzed after the crash by using the build ID to find the matching vmlinux and understand where in the function something went wrong. Example stacktrace from lkdtm: WARNING: CPU: 4 PID: 3255 at drivers/misc/lkdtm/bugs.c:83 lkdtm_WARNING+0x28/0x30 [lkdtm] Modules linked in: lkdtm rfcomm algif_hash algif_skcipher af_alg xt_cgroup uinput xt_MASQUERADE CPU: 4 PID: 3255 Comm: bash Not tainted 5.11 #3 aa23f7a1231c229de205662d5a9e0d4c580f19a1 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) pstate: 00400009 (nzcv daif +PAN -UAO -TCO BTYPE=--) pc : lkdtm_WARNING+0x28/0x30 [lkdtm] The hex string aa23f7a1231c229de205662d5a9e0d4c580f19a1 is the build ID, following the kernel version number. Put it all behind a config option, STACKTRACE_BUILD_ID, so that kernel developers can remove this information if they decide it is too much. Link: https://lkml.kernel.org/r/20210511003845.2429846-5-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Boyd authored
fix implicit declaration of function 'init_vmlinux_build_id' Link: https://lkml.kernel.org/r/CAE-0n51UjTbay8N9FXAyE7_aR2+ePrQnKSRJ0gbmRsXtcLBVaw@mail.gmail.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-