diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/Overview.txt
index f17bc4c9dff9fa1334d518e0a6c0ffc8ac270e3a..400c0c270d2e8d935e55fc1396989e75abbad36d 100644
--- a/Documentation/arm/keystone/Overview.txt
+++ b/Documentation/arm/keystone/Overview.txt
@@ -49,24 +49,6 @@ specified through DTS. Following are the DTS used:-
The device tree documentation for the keystone machines are located at
Documentation/devicetree/bindings/arm/keystone/keystone.txt
-Known issues & workaround
--------------------------
-
-Some of the device drivers used on keystone are re-used from that from
-DaVinci and other TI SoCs. These device drivers may use clock APIs directly.
-Some of the keystone specific drivers such as netcp uses run time power
-management API instead to enable clock. As this API has limitations on
-keystone, following workaround is needed to boot Linux.
-
- Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise
- clock frameworks will try to disable clocks that are unused and disable
- the hardware. This is because netcp related power domain and clock
- domains are enabled in u-boot as run time power management API currently
- doesn't enable clocks for netcp due to a limitation. This workaround is
- expected to be removed in the future when proper API support becomes
- available. Until then, this work around is needed.
-
-
Document Author
---------------
Murali Karicheri <m-karicheri2@ti.com>
diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi
index 01aef230773d4052e19ba13b5c4a95df9ea08787..5acbd0dcc2abd9d3ffd3ac09adeab6f2dc33dfad 100644
--- a/arch/arm/boot/dts/k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/k2l-netcp.dtsi
@@ -137,7 +137,7 @@ netcp: netcp@26000000 {
/* NetCP address range */
ranges = <0 0x26000000 0x1000000>;
- clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+ clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>;
dma-coherent;
ti,navigator-dmas = <&dma_gbe 0>,