From a4895cce6b1e09853141d3ca01792f8178a5da6c Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sebastian.reichel@collabora.com>
Date: Thu, 30 Mar 2023 15:44:36 +0200
Subject: [PATCH] arm64: dts: rockchip: rk3588-rock5b: add USB2
Enable USB2 (EHCI and OCHI mode) support for the Radxa ROCK 5 Model B.
This adds USB support on the M.2 Key E, both USB2 ports and USB2 mode
for the upper USB3 port (the one further away from the PCB).
The lower USB3 (closer to the PCB) and the USB-C ports use the RK3588
USB TypeC host controller, which is not yet supported upstream.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../boot/dts/rockchip/rk3588-rock-5b.dts | 56 +++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 83971b19a3824..3bd80622423a0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -3,6 +3,7 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3588.dtsi"
#include "rk3588-rk806-single.dtsi"
@@ -47,6 +48,20 @@ vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2 {
vin-supply = <&vcc_3v3_s3>;
};
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
sound {
compatible = "audio-graph-card";
label = "Analog";
@@ -133,12 +148,53 @@ &sdmmc {
status = "okay";
};
+&u2phy2_host {
+ /* connected to USB hub, which is powered by vcc5v0_sys */
+ phy-supply = <&vcc5v0_sys>;
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
&pinctrl {
sound {
hp_detect: hp-detect {
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ usb {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&combphy0_ps {
--
GitLab