microblaze: Remove AtmarkTechno Suzaku board

Users should use microblaze-generic platform.
This platform is longer not supported.

Signed-off-by: Michal Simek <monstr@monstr.eu>

MAINTAINERS

@@ -806,10 +806,6 @@ Scott McNutt <smcnutt@psyent.com>
 #	Board		CPU						#
 #########################################################################
 
-Yasushi Shoji <yashi@atmark-techno.com>
-
-	SUZAKU		MicroBlaze
-
 Michal Simek <monstr@monstr.eu>
 
 	microblaze-generic	MicroBlaze

MAKEALL

@@ -775,7 +775,6 @@ LIST_nios2="		\
 
 LIST_microblaze="			\
 	microblaze-generic		\
-	suzaku				\
 "
 
 #########################################################################

Makefile

@@ -3541,11 +3541,6 @@ microblaze-generic_config:	unconfig
 	@mkdir -p $(obj)include
 	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
 
-suzaku_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
-
 #========================================================================
 # Blackfin
 #========================================================================

board/AtmarkTechno/suzaku/Makefile

-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o flash.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################

board/AtmarkTechno/suzaku/config.mk

-#
-# (C) Copyright 2004 Atmark Techno, Inc.
-#
-# Yasushi SHOJI <yashi@atmark-techno.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x80F00000
-
-PLATFORM_CPPFLAGS += -mno-xl-soft-mul
-PLATFORM_CPPFLAGS += -mno-xl-soft-div
-PLATFORM_CPPFLAGS += -mxl-barrel-shift

board/AtmarkTechno/suzaku/flash.c

-/*
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-unsigned long flash_init(void)
-{
-	return 0;
-}
-
-void flash_print_info(flash_info_t *info)
-{
-}
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-	return 0;
-}
-
-int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	return 0;
-}

board/AtmarkTechno/suzaku/suzaku.c

-/*
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* This is a board specific file.  It's OK to include board specific
- * header files */
-#include <config.h>
-
-void do_reset(void)
-{
-	*((unsigned long *)(MICROBLAZE_SYSREG_BASE_ADDR)) = MICROBLAZE_SYSREG_RECONFIGURE;
-}

board/AtmarkTechno/suzaku/u-boot.lds

-/*
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(microblaze)
-ENTRY(_start)
-
-SECTIONS
-{
-	.text ALIGN(0x4):
-	{
-		__text_start = .;
-		cpu/microblaze/start.o (.text)
-		*(.text)
-		__text_end = .;
-	}
-
-	.rodata ALIGN(0x4):
-	{
-		__rodata_start = .;
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-		__rodata_end = .;
-	}
-
-	.data ALIGN(0x4):
-	{
-		__data_start = .;
-		*(.data)
-		__data_end = .;
-	}
-
-	.u_boot_cmd ALIGN(0x4):
-	{
-		. = .;
-		__u_boot_cmd_start = .;
-		*(.u_boot_cmd)
-		__u_boot_cmd_end = .;
-	}
-
-	.bss ALIGN(0x4):
-	{
-		__bss_start = .;
-		*(.bss)
-		. = ALIGN(4);
-		__bss_end = .;
-	}
-	__end = . ;
-}

include/configs/suzaku.h

-/*
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MICROBLAZE	1	/* This is an MicroBlaze CPU	*/
-#define CONFIG_SUZAKU		1	/* on an SUZAKU Board		*/
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x80000000
-#define CONFIG_SYS_SDRAM_SIZE		0x01000000
-#define CONFIG_SYS_FLASH_BASE		0xfff00000
-#define CONFIG_SYS_FLASH_SIZE		0x00400000
-#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - (1024 * 1024))
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - (1024 * 1024))
-
-#define CONFIG_XILINX_UARTLITE
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
-
-/* System Register (GPIO) */
-#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
-#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_SAVEENV
-#undef CONFIG_CMD_MEMORY
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_MISC
-
-#define CONFIG_SYS_UART1_BASE		(0xFFFF2000)
-#define CONFIG_SERIAL_BASE	CONFIG_SYS_UART1_BASE
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT		"SUZAKU> "	/* Monitor Command Prompt	*/
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size	*/
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE	/* default load address		*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	1	/* max number of sectors on one chip	*/
-
-/*-----------------------------------------------------------------------
- * NVRAM organization
- */
-#define CONFIG_ENV_IS_NOWHERE	1
-#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
-#define CONFIG_ENV_SECT_SIZE	0x10000	/* see README - env sector total size	*/
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000	/* inside of SDRAM */
-#define CONFIG_SYS_INIT_RAM_END	0x2000		/* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE	128		/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define XILINX_CLOCK_FREQ	50000000
-#define CONFIG_XILINX_CLOCK_FREQ	XILINX_CLOCK_FREQ
-
-#endif	/* __CONFIG_H */