Skip to content
Snippets Groups Projects
Commit 2089b7be authored by Tim Harvey's avatar Tim Harvey Committed by Stefano Babic
Browse files

imx: ventana: use common uart and i2c setup functions in SPL


Now that uart and i2c setup functions have been moved to common.c we can
use these and remove code duplication.

Signed-off-by: default avatarTim Harvey <tharvey@gateworks.com>
parent 6d38f3a8
No related branches found
No related tags found
No related merge requests found
......@@ -6,10 +6,8 @@
*/
#include <common.h>
#include <i2c.h>
#include <asm/io.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-ddr.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
......@@ -18,54 +16,14 @@
#include <asm/imx-common/mxc_i2c.h>
#include <spl.h>
#include "ventana_eeprom.h"
#include "gsc.h"
#include "common.h"
DECLARE_GLOBAL_DATA_PTR;
#define RTT_NOM_120OHM /* use 120ohm Rtt_nom vs 60ohm (lower power) */
#define I2C_GSC 0
#define GSC_EEPROM_ADDR 0x51
#define GSC_EEPROM_DDR_SIZE 0x2B /* enum (512,1024,2048) MB */
#define GSC_EEPROM_DDR_WIDTH 0x2D /* enum (32,64) bit */
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
#define CONFIG_SYS_I2C_SPEED 100000
/* I2C1: GSC */
static struct i2c_pads_info mx6q_i2c_pad_info0 = {
.scl = {
.i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
.gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC,
.gp = IMX_GPIO_NR(3, 21)
},
.sda = {
.i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
.gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC,
.gp = IMX_GPIO_NR(3, 28)
}
};
static struct i2c_pads_info mx6dl_i2c_pad_info0 = {
.scl = {
.i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC,
.gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC,
.gp = IMX_GPIO_NR(3, 21)
},
.sda = {
.i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC,
.gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC,
.gp = IMX_GPIO_NR(3, 28)
}
};
static void i2c_setup_iomux(void)
{
if (is_cpu_type(MXC_CPU_MX6Q))
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info0);
else
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info0);
}
/* configure MX6Q/DUAL mmdc DDR io registers */
struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
......@@ -540,8 +498,8 @@ void board_init_f(ulong dummy)
gpr_init();
/* iomux and setup of i2c */
board_early_init_f();
i2c_setup_iomux();
setup_iomux_uart();
setup_ventana_i2c();
/* setup GP timer */
timer_init();
......@@ -550,7 +508,7 @@ void board_init_f(ulong dummy)
preloader_console_init();
/* read/validate EEPROM info to determine board model and SDRAM cfg */
board_model = read_eeprom(I2C_GSC, &ventana_info);
board_model = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
/* provide some some default: 32bit 128MB */
if (GW_UNKNOWN == board_model) {
......
0% Loading or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment