Merge and reformat boards.cfg and MAINTAINERS

Put all informations about targets, including state (active or
orphan) and maintainers, in boards.cfg; remove MAINTAINERS;
adjust the build system accordingly.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>

MAKEALL

@@ -106,9 +106,9 @@ while true ; do
 	-s|--soc)
 		# echo "Option SoC: argument \`$2'"
 		if [ "$opt_s" ] ; then
-			opt_s="${opt_s%)} || \$6 == \"$2\" || \$6 ~ /$2/)"
+			opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
 		else
-			opt_s="(\$6 == \"$2\" || \$6 ~ /$2/)"
+			opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
 		fi
 		SELECTED='y'
 		shift 2 ;;
@@ -160,7 +160,7 @@ FILTER="\$1 !~ /^#/"
 [ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
 
 if [ "$SELECTED" ] ; then
-	SELECTED=$(awk '('"$FILTER"') { print $1 }' boards.cfg)
+	SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
 
 	# Make sure some boards from boards.cfg are actually found
 	if [ -z "$SELECTED" ] ; then
@@ -232,12 +232,12 @@ boards_by_field()
 		-v field="$1" \
 		-v select="$2" \
 		-F "$FS" \
-		'($1 !~ /^#/ && $field == select) { print $1 }' \
+		'($1 !~ /^#/ && $field == select) { print $7 }' \
 		boards.cfg
 }
 boards_by_arch() { boards_by_field 2 "$@" ; }
 boards_by_cpu()  { boards_by_field 3 "$@" "[: \t]+" ; }
-boards_by_soc()  { boards_by_field 6 "$@" ; }
+boards_by_soc()  { boards_by_field 4 "$@" ; }
 
 #########################################################################
 ## MPC5xx Systems
@@ -519,56 +519,53 @@ get_target_location() {
 	local vendor=""
 
 	# Automatic mode
-	local line=`egrep -i "^[[:space:]]*${target}[[:space:]]" boards.cfg`
-
+	local line=`awk -F '\ +' '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 	if [ -z "${line}" ] ; then echo "" ; return ; fi
 
 	set ${line}
 
-	# add default board name if needed
-	[ $# = 3 ] && set ${line} ${1}
-
-	CONFIG_NAME="${1%_config}"
+	CONFIG_NAME="${7%_config}"
 
-	[ "${BOARD_NAME}" ] || BOARD_NAME="${1%_config}"
+	[ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
 
-	if [ "$4" = "-" ] ; then
-		board=${BOARD_NAME}
-	else
-		board="$4"
+	if [ $# -gt 5 ]; then
+		if [ "$6" = "-" ] ; then
+			board=${BOARD_NAME}
+		else
+			board="$6"
+		fi
 	fi
 
 	[ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
-	[ $# -gt 6 ] && [ "$7" != "-" ] && {
-		tmp="${7%:*}"
+	[ $# -gt 6 ] && [ "$8" != "-" ] && {
+		tmp="${8%:*}"
 		if [ "$tmp" ] ; then
 			CONFIG_NAME="$tmp"
 		fi
 	}
 
 	# Assign board directory to BOARDIR variable
-	if [ -z "${vendor}" ] ; then
+	if [ "${vendor}" == "-" ] ; then
 	    BOARDDIR=${board}
 	else
 	    BOARDDIR=${vendor}/${board}
 	fi
 
-	echo "${CONFIG_NAME}:${BOARDDIR}"
+	echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
 }
 
 get_target_maintainers() {
-	local name=`echo $1 | cut -d : -f 1`
+	local name=`echo $1 | cut -d : -f 3`
 
-	if ! grep -qsi "[[:blank:]]${name}[[:blank:]]" MAINTAINERS ; then
+	local line=`awk -F '\ +' '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
+	if [ -z "${line}" ]; then
 		echo ""
 		return ;
 	fi
 
-	local line=`tac MAINTAINERS | grep -ni "[[:blank:]]${name}[[:blank:]]" | cut -d : -f 1`
-	local mail=`tac MAINTAINERS | tail -n +${line} | \
-		sed -n ":start /.*@.*/ { b mail } ; n ; b start ; :mail /.*@.*/ { p ; n ; b mail } ; q" | \
-		sed "s/^.*<//;s/>.*$//"`
-	echo "$mail"
+	local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
+	[ "$mails" == "-" ] && mails=""
+	echo "$mails"
 }
 
 get_target_arch() {

Makefile

@@ -838,7 +838,7 @@ unconfig:
 
 sinclude $(obj).boards.depend
 $(obj).boards.depend:	boards.cfg
-	@awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }' $< > $@
+	@awk '(NF && $$1 !~ /^#/) { print $$7 ": " $$7 "_config; $$(MAKE) -d" }' $< > $@
 
 #
 # Functions to generate common board directory names

README

@@ -35,7 +35,7 @@ Makefile have been tested to some extent and can be considered
 "working". In fact, many of them are used in production systems.
 
 In case of problems see the CHANGELOG and CREDITS files to find out
-who contributed the specific port. The MAINTAINERS file lists board
+who contributed the specific port. The boards.cfg file lists board
 maintainers.
 
 Note: There is no CHANGELOG file in the actual U-Boot source tree;
@@ -5833,8 +5833,8 @@ it:
 
 * For major contributions, your entry to the CREDITS file
 
-* When you add support for a new board, don't forget to add this
-  board to the MAINTAINERS file, too.
+* When you add support for a new board, don't forget to add a
+  maintainer e-mail address to the boards.cfg file, too.
 
 * If your patch adds new configuration options, don't forget to
   document these in the README file.

mkconfig

@@ -23,10 +23,11 @@ options=""
 
 if [ \( $# -eq 2 \) -a \( "$1" = "-A" \) ] ; then
 	# Automatic mode
-	line=`egrep -i "^[[:space:]]*${2}[[:space:]]" boards.cfg` || {
+	line=`awk '($0 !~ /^#/ && $7 ~ /^'"$2"'$/) { print $1, $2, $3, $4, $5, $6, $7, $8 }' boards.cfg`
+	if [ -z "$line" ] ; then
 		echo "make: *** No rule to make target \`$2_config'.  Stop." >&2
 		exit 1
-	}
+	fi
 
 	set ${line}
 	# add default board name if needed
@@ -37,44 +38,44 @@ while [ $# -gt 0 ] ; do
 	case "$1" in
 	--) shift ; break ;;
 	-a) shift ; APPEND=yes ;;
-	-n) shift ; BOARD_NAME="${1%_config}" ; shift ;;
+	-n) shift ; BOARD_NAME="${7%_config}" ; shift ;;
 	-t) shift ; TARGETS="`echo $1 | sed 's:_: :g'` ${TARGETS}" ; shift ;;
 	*)  break ;;
 	esac
 done
 
-[ $# -lt 4 ] && exit 1
-[ $# -gt 7 ] && exit 1
+[ $# -lt 7 ] && exit 1
+[ $# -gt 8 ] && exit 1
 
 # Strip all options and/or _config suffixes
-CONFIG_NAME="${1%_config}"
+CONFIG_NAME="${7%_config}"
 
-[ "${BOARD_NAME}" ] || BOARD_NAME="${1%_config}"
+[ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
 
 arch="$2"
 cpu=`echo $3 | awk 'BEGIN {FS = ":"} ; {print $1}'`
 spl_cpu=`echo $3 | awk 'BEGIN {FS = ":"} ; {print $2}'`
-if [ "$4" = "-" ] ; then
+if [ "$6" = "-" ] ; then
 	board=${BOARD_NAME}
 else
-	board="$4"
+	board="$6"
 fi
-[ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
-[ $# -gt 5 ] && [ "$6" != "-" ] && soc="$6"
-[ $# -gt 6 ] && [ "$7" != "-" ] && {
+[ "$5" != "-" ] && vendor="$5"
+[ "$4" != "-" ] && soc="$4"
+[ $# -gt 7 ] && [ "$8" != "-" ] && {
 	# check if we have a board config name in the options field
 	# the options field mave have a board config name and a list
 	# of options, both separated by a colon (':'); the options are
 	# separated by commas (',').
 	#
 	# Check for board name
-	tmp="${7%:*}"
+	tmp="${8%:*}"
 	if [ "$tmp" ] ; then
 		CONFIG_NAME="$tmp"
 	fi
 	# Check if we only have a colon...
-	if [ "${tmp}" != "$7" ] ; then
-		options=${7#*:}
+	if [ "${tmp}" != "$8" ] ; then
+		options=${8#*:}
 		TARGETS="`echo ${options} | sed 's:,: :g'` ${TARGETS}"
 	fi
 }

tools/buildman/board.py

@@ -63,7 +63,7 @@ class Boards:
                 for upto in range(len(fields)):
                     if fields[upto] == '-':
                         fields[upto] = ''
-                while len(fields) < 7:
+                while len(fields) < 9:
                     fields.append('')
 
                 board = Board(*fields)

tools/reformat.py

+#! /usr/bin/python
+########################################################################
+#
+# reorder and reformat a file in columns
+#
+# this utility takes lines from its standard input and reproduces them,
+# partially reordered and reformatted, on its standard output.
+#
+# It has the same effect as a 'sort | column -t', with the exception
+# that empty lines, as well as lines which start with a '#' sign, are
+# not affected, i.e. they keep their position and formatting, and act
+# as separators, i.e. the parts before and after them are each sorted
+# separately (but overall field widths are computed across the whole
+# input).
+#
+# Options:
+#   -i:
+#   --ignore-case:
+#	Do not consider case when sorting.
+#   -d:
+#   --default:
+#	What to chage empty fields to.
+#    -s <N>:
+#    --split=<N>:
+#       Treat only the first N whitespace sequences as separators.
+#       line content after the Nth separator will count as only one
+#       field even if it contains whitespace.
+#       Example : '-s 2' causes input 'a b c d e' to be split into
+#       three fields, 'a', 'b', and 'c d e'.
+#
+# boards.cfg requires -ids 6.
+#
+########################################################################
+
+import sys, getopt, locale
+
+# ensure we sort using the C locale.
+
+locale.setlocale(locale.LC_ALL, 'C')
+
+# check options
+
+maxsplit = 0
+ignore_case = 0
+default_field =''
+
+try:
+	opts, args = getopt.getopt(sys.argv[1:], "id:s:",
+		["ignore-case","default","split="])
+except getopt.GetoptError as err:
+	print str(err) # will print something like "option -a not recognized"
+        sys.exit(2)
+
+for o, a in opts:
+	if o in ("-s", "--split"):
+		maxsplit = eval(a)
+	elif o in ("-i", "--ignore-case"):
+		ignore_case = 1
+	elif o in ("-d", "--default"):
+		default_field = a
+	else:
+		assert False, "unhandled option"
+
+# collect all lines from standard input and, for the ones which must be
+# reformatted and sorted, count their fields and compute each field's
+# maximum size
+
+input_lines = []
+field_width = []
+
+for line in sys.stdin:
+	# remove final end of line
+	input_line = line.strip('\n')
+	if (len(input_line)>0) and (input_line[0] != '#'):
+		# sortable line: split into fields
+		fields = input_line.split(None,maxsplit)
+		# if there are new fields, top up field_widths
+		for f in range(len(field_width), len(fields)):
+			field_width.append(0)
+		# compute the maximum witdh of each field
+		for f in range(len(fields)):
+			field_width[f] = max(field_width[f],len(fields[f]))
+	# collect the line for next stage
+	input_lines.append(input_line)
+
+# run through collected input lines, collect the ones which must be
+# reformatted and sorted, and whenever a non-reformattable, non-sortable
+# line is met, sort the collected lines before it and append them to the
+# output lines, then add the non-sortable line too.
+
+output_lines = []
+sortable_lines = []
+for input_line in input_lines:
+	if (len(input_line)>0) and (input_line[0] != '#'):
+		# this line should be reformatted and sorted
+		input_fields = input_line.split(None,maxsplit)
+		output_fields = [];
+		# reformat each field to this field's column width
+		for f in range(len(input_fields)):
+			output_field = input_fields[f];
+			output_fields.append(output_field.ljust(field_width[f]))
+		# any missing field is set to default if it exists
+		if default_field != '':
+			for f in range(len(input_fields),len(field_width)):
+				output_fields.append(default_field.ljust(field_width[f]))
+		# join fields using two spaces, like column -t would
+		output_line = '  '.join(output_fields);
+		# collect line for later
+		sortable_lines.append(output_line)
+	else:
+		# this line is non-sortable
+		# sort collected sortable lines
+		if ignore_case!=0:
+			sortable_lines.sort(key=lambda x: str.lower(locale.strxfrm(x)))
+		else:
+			sortable_lines.sort(key=lambda x: locale.strxfrm(x))
+		# append sortable lines to the final output
+		output_lines.extend(sortable_lines)
+		sortable_lines = []
+		# append non-sortable line to the final output
+		output_lines.append(input_line)
+# maybe we had sortable lines pending, so append them to the final output
+if ignore_case!=0:
+	sortable_lines.sort(key=lambda x: str.lower(locale.strxfrm(x)))
+else:
+	sortable_lines.sort(key=lambda x: locale.strxfrm(x))
+output_lines.extend(sortable_lines)
+
+# run through output lines and print them, except rightmost whitespace
+
+for output_line in output_lines:
+	print output_line.rstrip()