diff --git a/board/freescale/ls2085a/README b/board/freescale/ls2085a/README
index b7023e1d484ae4f9d26aa1f30e0ed643d711f4b5..bc1d0bb4a7061be3831e7b6920f5f7600a0c1193 100644
--- a/board/freescale/ls2085a/README
+++ b/board/freescale/ls2085a/README
@@ -14,3 +14,14 @@ Memory map from core's view
Other addresses are either reserved, or not used directly by u-boot.
This list should be updated when more addresses are used.
+
+Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
+-------------------------------------------------------------------
+One needs to use appropriate bootargs to boot Linux flavors which do
+not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
+below:
+
+=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
+ earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
+ hugepages=16 mem=2048M'
+
diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c
index dd0acf23b23a9d42138a71d266a5ad4a9e44b169..e43dd4c9af9442c79e66885c43b07a758b1e6bf9 100644
--- a/board/freescale/ls2085a/ls2085a.c
+++ b/board/freescale/ls2085a/ls2085a.c
@@ -127,15 +127,18 @@ void fdt_fixup_board_enet(void *fdt)
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
- phys_addr_t base;
- phys_size_t size;
+ u64 base[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
ft_cpu_setup(blob, bd);
- /* limit the memory size to bank 1 until Linux can handle 40-bit PA */
- base = getenv_bootm_low();
- size = getenv_bootm_size();
- fdt_fixup_memory(blob, (u64)base, (u64)size);
+ /* fixup DT for the two GPP DDR banks */
+ base[0] = gd->bd->bi_dram[0].start;
+ size[0] = gd->bd->bi_dram[0].size;
+ base[1] = gd->bd->bi_dram[1].start;
+ size[1] = gd->bd->bi_dram[1].size;
+
+ fdt_fixup_memory_banks(blob, base, size, 2);
#ifdef CONFIG_FSL_MC_ENET
fdt_fixup_board_enet(blob);
diff --git a/board/freescale/ls2085aqds/README b/board/freescale/ls2085aqds/README
index fb3938e673f8e66b5e7aec77a6b7bdc064bde267..11b2e79945f7c3db40b38a5bf3574932b37285d4 100644
--- a/board/freescale/ls2085aqds/README
+++ b/board/freescale/ls2085aqds/README
@@ -127,3 +127,22 @@ b) NOR boot
c) NAND boot
d) SD boot
e) QSPI boot
+
+Environment Variables
+---------------------
+- mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined
+ the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed.
+
+- mcmemsize: MC DRAM block size. If this variable is not defined
+ the value CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.
+
+Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
+-------------------------------------------------------------------
+One needs to use appropriate bootargs to boot Linux flavors which do
+not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
+below:
+
+=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
+ earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
+ hugepages=16 mem=2048M'
+
diff --git a/board/freescale/ls2085aqds/ls2085aqds.c b/board/freescale/ls2085aqds/ls2085aqds.c
index 27a23ec75180166eba7f4d8626455f7e0dfd155a..9b57799f91a12ad3a45a2a128e4a0b41f4930b48 100644
--- a/board/freescale/ls2085aqds/ls2085aqds.c
+++ b/board/freescale/ls2085aqds/ls2085aqds.c
@@ -244,15 +244,18 @@ void fdt_fixup_board_enet(void *fdt)
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
- phys_addr_t base;
- phys_size_t size;
+ u64 base[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
ft_cpu_setup(blob, bd);
- /* limit the memory size to bank 1 until Linux can handle 40-bit PA */
- base = getenv_bootm_low();
- size = getenv_bootm_size();
- fdt_fixup_memory(blob, (u64)base, (u64)size);
+ /* fixup DT for the two GPP DDR banks */
+ base[0] = gd->bd->bi_dram[0].start;
+ size[0] = gd->bd->bi_dram[0].size;
+ base[1] = gd->bd->bi_dram[1].start;
+ size[1] = gd->bd->bi_dram[1].size;
+
+ fdt_fixup_memory_banks(blob, base, size, 2);
#ifdef CONFIG_FSL_MC_ENET
fdt_fixup_board_enet(blob);
diff --git a/board/freescale/ls2085ardb/README b/board/freescale/ls2085ardb/README
index cfd5185f463c03bd4bfd4429a18cc96b5eea0a0a..2f18243a8b2dbb8d11846d84802e3ed808a39698 100644
--- a/board/freescale/ls2085ardb/README
+++ b/board/freescale/ls2085ardb/README
@@ -107,3 +107,14 @@ Booting Options
---------------
a) NOR boot
b) NAND boot
+
+Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
+-------------------------------------------------------------------
+One needs to use appropriate bootargs to boot Linux flavors which do
+not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
+below:
+
+=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
+ earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
+ hugepages=16 mem=2048M'
+
diff --git a/board/freescale/ls2085ardb/ls2085ardb.c b/board/freescale/ls2085ardb/ls2085ardb.c
index abe2114e1739573b2db928f28e25428f2ccd27f1..15cb25167cdf5d61cf5682a2b691df806a017527 100644
--- a/board/freescale/ls2085ardb/ls2085ardb.c
+++ b/board/freescale/ls2085ardb/ls2085ardb.c
@@ -241,15 +241,18 @@ void fdt_fixup_board_enet(void *fdt)
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
- phys_addr_t base;
- phys_size_t size;
+ u64 base[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
ft_cpu_setup(blob, bd);
- /* limit the memory size to bank 1 until Linux can handle 40-bit PA */
- base = getenv_bootm_low();
- size = getenv_bootm_size();
- fdt_fixup_memory(blob, (u64)base, (u64)size);
+ /* fixup DT for the two GPP DDR banks */
+ base[0] = gd->bd->bi_dram[0].start;
+ size[0] = gd->bd->bi_dram[0].size;
+ base[1] = gd->bd->bi_dram[1].start;
+ size[1] = gd->bd->bi_dram[1].size;
+
+ fdt_fixup_memory_banks(blob, base, size, 2);
#ifdef CONFIG_FSL_MC_ENET
fdt_fixup_board_enet(blob);