This is a MIME GnuPG-signed message.  If you see this text, it means that
your E-mail or Usenet software does not support MIME signed messages.
The Internet standard for MIME PGP messages, RFC 2015, was published in 1996.
To open this message correctly you will need to install E-mail or Usenet
software that supports modern Internet standards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Updating omap4_sdp/panda and omap5_uevm maintainer.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: R Sricharan <r.sricharan@ti.com>

Commit 3d622b78 (mx6: soc: Introduce set_ldo_voltage()) introduces
set_ldo_voltage() function that can be used to set the voltages
of any of the three LDO regulators controlled by the PMU_REG_CORE register.

Prior to this commit there was a single set_vddsoc() which only configured the
VDDSOC regulator.

Update the comments to align with the new set_ldo_voltage() implementation.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

DIV_SELECT is used as Fout = Fin * div_select / 2.0, so we should do
the shift after the multiply to avoid rounding errors

Signed-off-by: Andre Renaud <andre@bluewatersys.com>

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lothar Rubusch <lothar@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>

Adjust the mtdparts settings to allow for alternative boot images and
for using UBI.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

- "env ask", "env grep" and "setexpr" are needed for commissioning
- add support for ext4 file systems
- adjust default environment to use ext4 commands
- add write support for (V)FAT and EXT4
- add bitmap and splashscreen support
- print timestamp information for images

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lothar Rubusch <lothar@denx.de>

Adjust the mtdparts to also consider factory-programmed config block.

Signed-off-by: Marek Vasut <marex@denx.de>

- "env ask", "env grep" and "setexpr" are needed for commissioning
- add support for ext4 file systems
- adjust default environment to use ext4 commands
- add write support for (V)FAT and EXT4
- add bitmap and splashscreen support
- print timestamp information for images

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

The following patch re-enables the dhcp functionality on omap3_beagle.
It was removed with df4dbb5d when
omap3_beagle was converted to use ti_omap3_common.h. I have tested
beagleboard and beagleboard-xm with this patch and confirmed dhcp is
working.

Signed-off-by: Tyler Baker <tyler.baker@linaro.org>

Fixes a bug when objcopy doesn't put .dtb.init.rodata section to resulting
u-boot.bin, so u-boot was unable to find embedded DTB.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Hans de Goede <hdegoede@redhat.com>

sha256 has some beefy memory footprint.
Make it optional for constrained systems.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

Commit "2842c1c2 fit: add sha256 support" badly increased
memory footprint, so some of our boards did not build anymore.
Since monitor base must not be changed I removed some commands
to save memory.

Maybe making sha256 optional for fit would be an option for
the future since it really has some beefy footprint.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

To avoid peer "ChReceivePathStatus"-messages on iocon startup, initialize
PHYs as soon as possible.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

For proper displayport performance, scrambling has to be enabled, but
is turned off on DP501 by default.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

The I2C bridge on DP501 supports EDID, MCCS and HDCP by default.
Allow EDID only to avoid I2C address conflicts.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

PPC4xx config options were not complete.
ICS8N3QV01 and SIL1178 needed some more configuration.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

IHS I2C master support was merely a hack in the osd driver.
Now it is a proper u-boot I2C framework driver, supporting the
v2.00 master features.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

There is a new iocon hardware flavor, supporting DisplayPort finally.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

readl was called with values instead of pointers to these values.
Why this ever did work is a mystery...

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

Since ARRAY_SIZE macro is defined in include/common.h,
re-defining it in arch-specific files is redundant.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>

Add invalidate_dcache_range() and flush_dcache_range() for the blackfin
architecture. Such functions already exist on this arch with different
names, so just forward the call.

This fixes the build of bf609-ezkit board as it uses
drivers/net/designware.c which requires the above functions.

Cc: Sonic Zhang <sonic.adi@gmail.com>, Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vasili Galka <vvv444@gmail.com>

get_sclk() was not defined in bfin_wdt.c, include the corresponding header.

Cc: Sonic Zhang <sonic.adi@gmail.com>
Signed-off-by: Vasili Galka <vvv444@gmail.com>

The csarX and cscrX registers in the fbcs_t struct are 16-bit for
CONFIG_M5235 and 32-bit wide otherwise. The code in cpu_init.c
accessed them always as 32-bit, effectively creating a wrong memory
access on M5235. Fixed that by choosing out_be16/out_be32 depending
on whether CONFIG_M5235 is defined or not.

Cc: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Vasili Galka <vvv444@gmail.com>

in_be16() shall be passed a pointer to register and not its value. This
is clearly a typo resulting in a wrong memory access, so fix it.

Cc: Alison Wang <b18965@freescale.com>, Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Vasili Galka <vvv444@gmail.com>

This board is old enough and has no maintainer.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

This board is old enough and has no maintainer.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

These boards are old enough and have no maintainers.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

These boards are old enough and have no maintainers.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

This board is old enough and has no maintainer.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

These boards are old enough and have no maintainers.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

These boards are old enough and have no maintainers.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>