Commit c9597298 authored by Tim-Philipp Müller's avatar Tim-Philipp Müller

docs: remove outdated and pointless 'Last reviewed' lines from docs

They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
parent c073a6c7
......@@ -34,8 +34,6 @@
* gst-launch-1.0 filesrc location=test.dv ! dvdemux name=demux ! dvdec ! xvimagesink
* ]| This pipeline decodes and renders the raw DV stream to a videosink.
* </refsect2>
*
* Last reviewed on 2006-02-28 (0.10.3)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -44,8 +44,6 @@
* gst-launch-1.0 filesrc location=test.dv ! dvdemux name=demux ! queue ! audioconvert ! alsasink demux. ! queue ! dvdec ! xvimagesink
* ]| This pipeline decodes and renders the raw DV stream to an audio and a videosink.
* </refsect2>
*
* Last reviewed on 2006-02-27 (0.10.3)
*/
/* DV output has two modes, normal and wide. The resolution is the same in both
......
......@@ -51,8 +51,6 @@
* gst-launch-1.0 audiotestsrc ! jackaudiosink
* ]| Play a sine wave to using jack.
* </refsect2>
*
* Last reviewed on 2006-11-30 (0.10.4)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -70,8 +70,6 @@
* gst-launch-1.0 jackaudiosrc connect=0 ! jackaudiosink connect=0
* ]| Get audio input into gstreamer from jack.
* </refsect2>
*
* Last reviewed on 2008-07-22 (0.10.4)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -34,8 +34,6 @@
* ]| Decode an Ogg/Speex file. To create an Ogg/Speex file refer to the
* documentation of speexenc.
* </refsect2>
*
* Last reviewed on 2006-04-05 (0.10.2)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -37,8 +37,6 @@
* compressed audio or video data, this will only work if you have the
* right decoder elements/plugins installed.
* </refsect2>
*
* Last reviewed on 2006-12-29 (0.10.6)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -33,8 +33,6 @@
* This plays an avi file with a video and subtitle stream.
* </para>
* </refsect2>
*
* Last reviewed on 2008-02-01
*/
/* example of a subtitle chunk in an avi file
......
......@@ -57,8 +57,6 @@
* </programlisting>
* </para>
* </refsect2>
*
* Documentation last reviewed on 2011-04-21
*/
#ifdef HAVE_CONFIG_H
......
......@@ -89,8 +89,6 @@
* Records a video stream captured from a v4l2 device, encodes it into H.264
* and muxes it into an mp4 file.
* </refsect2>
*
* Documentation last reviewed on 2011-04-21
*/
/* ============================= 3gppmux ==================================== */
......
......@@ -87,8 +87,6 @@
* ]|
* Records a video stream captured from a v4l2 device and muxes it into a qt file.
* </refsect2>
*
* Last reviewed on 2010-12-03
*/
/*
......
......@@ -40,8 +40,6 @@
* compressed audio or video data, this will only work if you have the
* right decoder elements/plugins installed.
* </refsect2>
*
* Last reviewed on 2006-12-29 (0.10.5)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -103,8 +103,6 @@
* gst-launch-1.0 videotestsrc ! multifilesink post-messages=true filename="frame%d"
* ]|
* </refsect2>
*
* Last reviewed on 2009-09-11 (0.10.17)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -31,8 +31,6 @@
* ]| This example pipeline will depayload an RTP raw audio stream. Refer to
* the rtpL16pay example to create the RTP stream.
* </refsect2>
*
* Last reviewed on 2013-04-25 (1.1.0)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -31,8 +31,6 @@
* ]| This example pipeline will payload raw audio. Refer to
* the rtpL16depay example to depayload and play the RTP stream.
* </refsect2>
*
* Last reviewed on 2013-04-25 (1.1.0)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -31,8 +31,6 @@
* ]| This example pipeline will depayload and decode an RTP AC3 stream. Refer to
* the rtpac3pay example to create the RTP stream.
* </refsect2>
*
* Last reviewed on 2013-04-25 (1.1.0)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -31,8 +31,6 @@
* ]| This example pipeline will encode and payload AC3 stream. Refer to
* the rtpac3depay example to depayload and decode the RTP stream.
* </refsect2>
*
* Last reviewed on 2013-04-25 (1.1.0)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -31,8 +31,6 @@
* ]| This example pipeline will depayload and decode an RTP AMR stream. Refer to
* the rtpamrpay example to create the RTP stream.
* </refsect2>
*
* Last reviewed on 2013-04-25 (1.1.0)
*/
/*
......
......@@ -31,8 +31,6 @@
* ]| This example pipeline will encode and payload an AMR stream. Refer to
* the rtpamrdepay example to depayload and decode the RTP stream.
* </refsect2>
*
* Last reviewed on 2013-04-25 (1.1.0)
*/
/* references:
......
......@@ -23,8 +23,6 @@
*
* Extract BroadcomVoice audio from RTP packets according to RFC 4298.
* For detailed information see: http://www.rfc-editor.org/rfc/rfc4298.txt
*
* Last reviewed on 2013-04-25 (1.1.0)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -23,8 +23,6 @@
*
* Payload BroadcomVoice audio into RTP packets according to RFC 4298.
* For detailed information see: http://www.rfc-editor.org/rfc/rfc4298.txt
*
* Last reviewed on 2013-04-25 (1.1.0)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -132,8 +132,6 @@
* Send RTCP reports for session 0 on port 5005 and RTCP reports for session 1
* on port 5007.
* </refsect2>
*
* Last reviewed on 2007-08-30 (0.10.6)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -91,8 +91,6 @@
* inserted into the pipeline to smooth out network jitter and to reorder the
* out-of-order RTP packets.
* </refsect2>
*
* Last reviewed on 2007-05-28 (0.10.5)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -46,8 +46,6 @@
* generated, both are encoded into different payload types and muxed together
* so they can be sent on the same port.
* </refsect2>
*
* Last reviewed on 2010-09-30 (0.10.21)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -46,8 +46,6 @@
* ]| Takes an RTP stream and send the RTP packets with the first detected
* payload type to fakesink, discarding the other payload types.
* </refsect2>
*
* Last reviewed on 2007-05-28 (0.10.5)
*/
/*
......
......@@ -109,8 +109,6 @@
* You can play with the drop-probability value for one or both streams.
* You should hear a clear sound. (after a few seconds the two streams wave feel synchronized)
* </refsect2>
*
* Last reviewed on 2013-11-08 (1.x)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -106,8 +106,6 @@
* packets are sent in the PAUSED state). Applications should manually set and
* keep (see gst_element_set_locked_state()) the RTCP udpsink to the PLAYING state.
* </refsect2>
*
* Last reviewed on 2007-05-28 (0.10.5)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -36,8 +36,6 @@
* ]| Takes an RTP stream and send the RTP packets with the first detected SSRC
* to fakesink, discarding the other SSRCs.
* </refsect2>
*
* Last reviewed on 2007-05-28 (0.10.5)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -45,8 +45,6 @@
* SECTION:element-rtpdec
*
* A simple RTP session manager used internally by rtspsrc.
*
* Last reviewed on 2006-06-20 (0.10.4)
*/
/* #define HAVE_RTCP */
......
......@@ -73,8 +73,6 @@
* ]| Establish a connection to an RTSP server and send the raw RTP packets to a
* fakesink.
* </refsect2>
*
* Last reviewed on 2006-08-18 (0.10.5)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -94,8 +94,6 @@
* <xi:include xmlns:xi="http://www.w3.org/2003/XInclude" parse="text" href="../../../../tests/examples/spectrum/spectrum-example.c" />
* </programlisting></informalexample>
* </refsect2>
*
* Last reviewed on 2011-03-10 (0.10.29)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -100,8 +100,6 @@
* gst-launch-1.0 -v udpsrc port=0 ! fakesink
* ]| read udp packets from a free port.
* </refsect2>
*
* Last reviewed on 2007-09-20 (0.10.7)
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
......
......@@ -42,8 +42,6 @@
* gst-launch-1.0 videotestsrc ! gamma gamma=0.5 ! videoconvert ! ximagesink
* ]| This pipeline will make the image "darker".
* </refsect2>
*
* Last reviewed on 2010-04-18 (0.10.22)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -36,8 +36,6 @@
* ]| This pipeline converts the image to black and white by setting the
* saturation to 0.0.
* </refsect2>
*
* Last reviewed on 2010-04-18 (0.10.22)
*/
#ifdef HAVE_CONFIG_H
......
......@@ -35,8 +35,6 @@
* gst-launch-1.0 videotestsrc ! videoflip method=clockwise ! videoconvert ! ximagesink
* ]| This pipeline flips the test image 90 degrees clockwise.
* </refsect2>
*
* Last reviewed on 2010-04-18 (0.10.22)
*/
......
......@@ -37,8 +37,6 @@
* gst-launch-1.0 gnomevfssrc location=http://www.example.org/sine.wav ! queue ! wavparse ! audioconvert ! alsasink
* ]| Stream data from a network url.
* </refsect2>
*
* Last reviewed on 2007-02-14 (0.10.6)
*/
/*
......
......@@ -58,8 +58,6 @@
* gst-launch-1.0 filesrc location=sine.ogg ! oggdemux ! vorbisdec ! audioconvert ! audioresample ! osxaudiosink
* ]| Play an Ogg/Vorbis file.
* </refsect2>
*
* Last reviewed on 2006-03-01 (0.10.4)
*/
#ifdef HAVE_CONFIG_H
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment