Commit 0e36d43c authored by Rafael J. Wysocki's avatar Rafael J. Wysocki
Browse files

Merge branch 'acpica'

* acpica: (63 commits)
  ACPICA: Namespace: Remove _PRP method support.
  ACPI: Fix x86 regression related to early mapping size limitation
  ACPICA: Tables: Add mechanism to control early table checksum verification.
  ACPICA: acpidump: Fix repetitive table dump in -n mode.
  ACPI: Clean up acpi_os_map/unmap_memory() to eliminate __iomem.
  ACPICA: Clean up redudant definitions already defined elsewhere
  ACPICA: Linux headers: Add <asm/acenv.h> to remove mis-ordered inclusion of <asm/acpi.h>
  ACPICA: Linux headers: Add <acpi/platform/aclinuxex.h>
  ACPICA: Linux headers: Remove ACPI_PREEMPTION_POINT() due to no usages.
  ACPICA: Update version to 20140424.
  ACPICA: Comment/format update, no functional change.
  ACPICA: Events: Update GPE handling and initialization code.
  ACPICA: Remove extraneous error message for large number of GPEs.
  ACPICA: Tables: Remove old mechanism to validate if XSDT contains NULL entries.
  ACPICA: Tables: Add new mechanism to skip NULL entries in RSDT and XSDT.
  ACPICA: acpidump: Add support to force using RSDT.
  ACPICA: Back port of improvements on exception code.
  ACPICA: Back port of _PRP update.
  ACPICA: acpidump: Fix truncated RSDP signature validation.
  ACPICA: Linux header: Add support for stubbed externals.
  ...
parents b04c58b1 729ddb65
......@@ -214,6 +214,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
unusable. The "log_buf_len" parameter may be useful
if you need to capture more output.
acpi_force_table_verification [HW,ACPI]
Enable table checksum verification during early stage.
By default, this is disabled due to x86 early mapping
size limitation.
acpi_irq_balance [HW,ACPI]
ACPI will balance active IRQs
default in APIC mode
......@@ -237,7 +242,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
This feature is enabled by default.
This option allows to turn off the feature.
acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT
acpi_no_static_ssdt [HW,ACPI]
Disable installation of static SSDTs at early boot time
By default, SSDTs contained in the RSDT/XSDT will be
installed automatically and they will appear under
/sys/firmware/acpi/tables.
This option turns off this feature.
Note that specifying this option does not affect
dynamic table installation which will install SSDT
tables to /sys/firmware/acpi/tables/dynamic.
acpica_no_return_repair [HW, ACPI]
Disable AML predefined validation mechanism
......
/*
* IA64 specific ACPICA environments and implementation
*
* Copyright (C) 2014, Intel Corporation
* Author: Lv Zheng <lv.zheng@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _ASM_IA64_ACENV_H
#define _ASM_IA64_ACENV_H
#include <asm/intrinsics.h>
#define COMPILER_DEPENDENT_INT64 long
#define COMPILER_DEPENDENT_UINT64 unsigned long
/* Asm macros */
#ifdef CONFIG_ACPI
static inline int
ia64_acpi_acquire_global_lock(unsigned int *lock)
{
unsigned int old, new, val;
do {
old = *lock;
new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
val = ia64_cmpxchg4_acq(lock, new, old);
} while (unlikely (val != old));
return (new < 3) ? -1 : 0;
}
static inline int
ia64_acpi_release_global_lock(unsigned int *lock)
{
unsigned int old, new, val;
do {
old = *lock;
new = old & ~0x3;
val = ia64_cmpxchg4_acq(lock, new, old);
} while (unlikely (val != old));
return old & 0x1;
}
#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \
((Acq) = ia64_acpi_acquire_global_lock(&facs->global_lock))
#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \
((Acq) = ia64_acpi_release_global_lock(&facs->global_lock))
#endif
#endif /* _ASM_IA64_ACENV_H */
......@@ -34,56 +34,6 @@
#include <linux/numa.h>
#include <asm/numa.h>
#define COMPILER_DEPENDENT_INT64 long
#define COMPILER_DEPENDENT_UINT64 unsigned long
/*
* Calling conventions:
*
* ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads)
* ACPI_EXTERNAL_XFACE - External ACPI interfaces
* ACPI_INTERNAL_XFACE - Internal ACPI interfaces
* ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces
*/
#define ACPI_SYSTEM_XFACE
#define ACPI_EXTERNAL_XFACE
#define ACPI_INTERNAL_XFACE
#define ACPI_INTERNAL_VAR_XFACE
/* Asm macros */
#define ACPI_FLUSH_CPU_CACHE()
static inline int
ia64_acpi_acquire_global_lock (unsigned int *lock)
{
unsigned int old, new, val;
do {
old = *lock;
new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
val = ia64_cmpxchg4_acq(lock, new, old);
} while (unlikely (val != old));
return (new < 3) ? -1 : 0;
}
static inline int
ia64_acpi_release_global_lock (unsigned int *lock)
{
unsigned int old, new, val;
do {
old = *lock;
new = old & ~0x3;
val = ia64_cmpxchg4_acq(lock, new, old);
} while (unlikely (val != old));
return old & 0x1;
}
#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \
((Acq) = ia64_acpi_acquire_global_lock(&facs->global_lock))
#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \
((Acq) = ia64_acpi_release_global_lock(&facs->global_lock))
#ifdef CONFIG_ACPI
extern int acpi_lapic;
#define acpi_disabled 0 /* ACPI always enabled on IA64 */
......
/*
* X86 specific ACPICA environments and implementation
*
* Copyright (C) 2014, Intel Corporation
* Author: Lv Zheng <lv.zheng@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _ASM_X86_ACENV_H
#define _ASM_X86_ACENV_H
#include <asm/special_insns.h>
/* Asm macros */
#define ACPI_FLUSH_CPU_CACHE() wbinvd()
#ifdef CONFIG_ACPI
int __acpi_acquire_global_lock(unsigned int *lock);
int __acpi_release_global_lock(unsigned int *lock);
#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \
((Acq) = __acpi_acquire_global_lock(&facs->global_lock))
#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \
((Acq) = __acpi_release_global_lock(&facs->global_lock))
/*
* Math helper asm macros
*/
#define ACPI_DIV_64_BY_32(n_hi, n_lo, d32, q32, r32) \
asm("divl %2;" \
: "=a"(q32), "=d"(r32) \
: "r"(d32), \
"0"(n_lo), "1"(n_hi))
#define ACPI_SHIFT_RIGHT_64(n_hi, n_lo) \
asm("shrl $1,%2 ;" \
"rcrl $1,%3;" \
: "=r"(n_hi), "=r"(n_lo) \
: "0"(n_hi), "1"(n_lo))
#endif
#endif /* _ASM_X86_ACENV_H */
......@@ -32,51 +32,6 @@
#include <asm/mpspec.h>
#include <asm/realmode.h>
#define COMPILER_DEPENDENT_INT64 long long
#define COMPILER_DEPENDENT_UINT64 unsigned long long
/*
* Calling conventions:
*
* ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads)
* ACPI_EXTERNAL_XFACE - External ACPI interfaces
* ACPI_INTERNAL_XFACE - Internal ACPI interfaces
* ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces
*/
#define ACPI_SYSTEM_XFACE
#define ACPI_EXTERNAL_XFACE
#define ACPI_INTERNAL_XFACE
#define ACPI_INTERNAL_VAR_XFACE
/* Asm macros */
#define ACPI_FLUSH_CPU_CACHE() wbinvd()
int __acpi_acquire_global_lock(unsigned int *lock);
int __acpi_release_global_lock(unsigned int *lock);
#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \
((Acq) = __acpi_acquire_global_lock(&facs->global_lock))
#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \
((Acq) = __acpi_release_global_lock(&facs->global_lock))
/*
* Math helper asm macros
*/
#define ACPI_DIV_64_BY_32(n_hi, n_lo, d32, q32, r32) \
asm("divl %2;" \
: "=a"(q32), "=d"(r32) \
: "r"(d32), \
"0"(n_lo), "1"(n_hi))
#define ACPI_SHIFT_RIGHT_64(n_hi, n_lo) \
asm("shrl $1,%2 ;" \
"rcrl $1,%3;" \
: "=r"(n_hi), "=r"(n_lo) \
: "0"(n_hi), "1"(n_lo))
#ifdef CONFIG_ACPI
extern int acpi_lapic;
extern int acpi_ioapic;
......
......@@ -220,13 +220,13 @@ static int __init extlog_init(void)
goto err;
}
extlog_l1_hdr = acpi_os_map_memory(l1_dirbase, l1_hdr_size);
extlog_l1_hdr = acpi_os_map_iomem(l1_dirbase, l1_hdr_size);
l1_head = (struct extlog_l1_head *)extlog_l1_hdr;
l1_size = l1_head->total_len;
l1_percpu_entry = l1_head->entries;
elog_base = l1_head->elog_base;
elog_size = l1_head->elog_len;
acpi_os_unmap_memory(extlog_l1_hdr, l1_hdr_size);
acpi_os_unmap_iomem(extlog_l1_hdr, l1_hdr_size);
release_mem_region(l1_dirbase, l1_hdr_size);
/* remap L1 header again based on completed information */
......@@ -237,7 +237,7 @@ static int __init extlog_init(void)
(unsigned long long)l1_dirbase + l1_size);
goto err;
}
extlog_l1_addr = acpi_os_map_memory(l1_dirbase, l1_size);
extlog_l1_addr = acpi_os_map_iomem(l1_dirbase, l1_size);
l1_entry_base = (u64 *)((u8 *)extlog_l1_addr + l1_hdr_size);
/* remap elog table */
......@@ -248,7 +248,7 @@ static int __init extlog_init(void)
(unsigned long long)elog_base + elog_size);
goto err_release_l1_dir;
}
elog_addr = acpi_os_map_memory(elog_base, elog_size);
elog_addr = acpi_os_map_iomem(elog_base, elog_size);
rc = -ENOMEM;
/* allocate buffer to save elog record */
......@@ -270,11 +270,11 @@ static int __init extlog_init(void)
err_release_elog:
if (elog_addr)
acpi_os_unmap_memory(elog_addr, elog_size);
acpi_os_unmap_iomem(elog_addr, elog_size);
release_mem_region(elog_base, elog_size);
err_release_l1_dir:
if (extlog_l1_addr)
acpi_os_unmap_memory(extlog_l1_addr, l1_size);
acpi_os_unmap_iomem(extlog_l1_addr, l1_size);
release_mem_region(l1_dirbase, l1_size);
err:
pr_warn(FW_BUG "Extended error log disabled because of problems parsing f/w tables\n");
......@@ -287,9 +287,9 @@ static void __exit extlog_exit(void)
mce_unregister_decode_chain(&extlog_mce_dec);
((struct extlog_l1_head *)extlog_l1_addr)->flags &= ~FLAG_OS_OPTIN;
if (extlog_l1_addr)
acpi_os_unmap_memory(extlog_l1_addr, l1_size);
acpi_os_unmap_iomem(extlog_l1_addr, l1_size);
if (elog_addr)
acpi_os_unmap_memory(elog_addr, elog_size);
acpi_os_unmap_iomem(elog_addr, elog_size);
release_mem_region(elog_base, elog_size);
release_mem_region(l1_dirbase, l1_size);
kfree(elog_buf);
......
......@@ -135,6 +135,7 @@ acpi-y += \
rsxface.o
acpi-y += \
tbdata.o \
tbfadt.o \
tbfind.o \
tbinstal.o \
......
/******************************************************************************
*
* Module Name: acapps - common include for ACPI applications/tools
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2014, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef _ACAPPS
#define _ACAPPS
/* Common info for tool signons */
#define ACPICA_NAME "Intel ACPI Component Architecture"
#define ACPICA_COPYRIGHT "Copyright (c) 2000 - 2014 Intel Corporation"
#if ACPI_MACHINE_WIDTH == 64
#define ACPI_WIDTH "-64"
#elif ACPI_MACHINE_WIDTH == 32
#define ACPI_WIDTH "-32"
#else
#error unknown ACPI_MACHINE_WIDTH
#define ACPI_WIDTH "-??"
#endif
/* Macros for signons and file headers */
#define ACPI_COMMON_SIGNON(utility_name) \
"\n%s\n%s version %8.8X%s [%s]\n%s\n\n", \
ACPICA_NAME, \
utility_name, ((u32) ACPI_CA_VERSION), ACPI_WIDTH, __DATE__, \
ACPICA_COPYRIGHT
#define ACPI_COMMON_HEADER(utility_name, prefix) \
"%s%s\n%s%s version %8.8X%s [%s]\n%s%s\n%s\n", \
prefix, ACPICA_NAME, \
prefix, utility_name, ((u32) ACPI_CA_VERSION), ACPI_WIDTH, __DATE__, \
prefix, ACPICA_COPYRIGHT, \
prefix
/* Macros for usage messages */
#define ACPI_USAGE_HEADER(usage) \
printf ("Usage: %s\nOptions:\n", usage);
#define ACPI_OPTION(name, description) \
printf (" %-18s%s\n", name, description);
#define FILE_SUFFIX_DISASSEMBLY "dsl"
#define ACPI_TABLE_FILE_SUFFIX ".dat"
/*
* getopt
*/
int acpi_getopt(int argc, char **argv, char *opts);
int acpi_getopt_argument(int argc, char **argv);
extern int acpi_gbl_optind;
extern int acpi_gbl_opterr;
extern int acpi_gbl_sub_opt_char;
extern char *acpi_gbl_optarg;
/*
* cmfsize - Common get file size function
*/
u32 cm_get_file_size(FILE * file);
#ifndef ACPI_DUMP_APP
/*
* adisasm
*/
acpi_status
ad_aml_disassemble(u8 out_to_file,
char *filename, char *prefix, char **out_filename);
void ad_print_statistics(void);
acpi_status ad_find_dsdt(u8 **dsdt_ptr, u32 *dsdt_length);
void ad_dump_tables(void);
acpi_status ad_get_local_tables(void);
acpi_status
ad_parse_table(struct acpi_table_header *table,
acpi_owner_id * owner_id, u8 load_table, u8 external);
acpi_status ad_display_tables(char *filename, struct acpi_table_header *table);
acpi_status ad_display_statistics(void);
/*
* adwalk
*/
void
acpi_dm_cross_reference_namespace(union acpi_parse_object *parse_tree_root,
struct acpi_namespace_node *namespace_root,
acpi_owner_id owner_id);
void acpi_dm_dump_tree(union acpi_parse_object *origin);
void acpi_dm_find_orphan_methods(union acpi_parse_object *origin);
void
acpi_dm_finish_namespace_load(union acpi_parse_object *parse_tree_root,
struct acpi_namespace_node *namespace_root,
acpi_owner_id owner_id);
void
acpi_dm_convert_resource_indexes(union acpi_parse_object *parse_tree_root,
struct acpi_namespace_node *namespace_root);
/*
* adfile
*/
acpi_status ad_initialize(void);
char *fl_generate_filename(char *input_filename, char *suffix);
acpi_status
fl_split_input_pathname(char *input_path,
char **out_directory_path, char **out_filename);
char *ad_generate_filename(char *prefix, char *table_id);
void
ad_write_table(struct acpi_table_header *table,
u32 length, char *table_name, char *oem_table_id);
#endif
#endif /* _ACAPPS */
......@@ -104,9 +104,10 @@ acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info *gpe_event_info);
*/
acpi_status
acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
struct acpi_generic_address *gpe_block_address,
u64 address,
u8 space_id,
u32 register_count,
u8 gpe_block_base_number,
u16 gpe_block_base_number,
u32 interrupt_number,
struct acpi_gpe_block_info **return_gpe_block);
......
......@@ -44,144 +44,14 @@
#ifndef __ACGLOBAL_H__
#define __ACGLOBAL_H__
/*
* Ensure that the globals are actually defined and initialized only once.
*
* The use of these macros allows a single list of globals (here) in order
* to simplify maintenance of the code.
*/
#ifdef DEFINE_ACPI_GLOBALS
#define ACPI_GLOBAL(type,name) \
extern type name; \
type name
#define ACPI_INIT_GLOBAL(type,name,value) \
type name=value
#else
#define ACPI_GLOBAL(type,name) \
extern type name
#define ACPI_INIT_GLOBAL(type,name,value) \
extern type name
#endif
#ifdef DEFINE_ACPI_GLOBALS
/* Public globals, available from outside ACPICA subsystem */
/*****************************************************************************
*
* Runtime configuration (static defaults that can be overriden at runtime)
* Globals related to the ACPI tables
*
****************************************************************************/
/*
* Enable "slack" in the AML interpreter? Default is FALSE, and the
* interpreter strictly follows the ACPI specification. Setting to TRUE
* allows the interpreter to ignore certain errors and/or bad AML constructs.
*
* Currently, these features are enabled by this flag:
*
* 1) Allow "implicit return" of last value in a control method
* 2) Allow access beyond the end of an operation region
* 3) Allow access to uninitialized locals/args (auto-init to integer 0)
* 4) Allow ANY object type to be a source operand for the Store() operator
* 5) Allow unresolved references (invalid target name) in package objects
* 6) Enable warning messages for behavior that is not ACPI spec compliant
*/
ACPI_INIT_GLOBAL(u8, acpi_gbl_enable_interpreter_slack, FALSE);
/* Master list of all ACPI tables that were found in the RSDT/XSDT */
/*
* Automatically serialize all methods that create named objects? Default
* is TRUE, meaning that all non_serialized methods are scanned once at
* table load time to determine those that create named objects. Methods
* that create named objects are marked Serialized in order to prevent
* possible run-time problems if they are entered by more than one thread.
*/
ACPI_INIT_GLOBAL(u8, acpi_gbl_auto_serialize_methods, TRUE);
/*
* Create the predefined _OSI method in the namespace? Default is TRUE
* because ACPI CA is fully compatible with other ACPI implementations.
* Changing this will revert ACPI CA (and machine ASL) to pre-OSI behavior.
*/
ACPI_INIT_GLOBAL(u8, acpi_gbl_create_osi_method, TRUE);
/*
* Optionally use default values for the ACPI register widths. Set this to
* TRUE to use the defaults, if an FADT contains incorrect widths/lengths.
*/
ACPI_INIT_GLOBAL(u8, acpi_gbl_use_default_register_widths, TRUE);
/*
* Optionally enable output from the AML Debug Object.
*/
ACPI_INIT_GLOBAL(u8, acpi_gbl_enable_aml_debug_object, FALSE);
/*
* Optionally copy the entire DSDT to local memory (instead of simply
* mapping it.) There are some BIOSs that corrupt or replace the original
* DSDT, creating the need for this option. Default is FALSE, do not copy
* the DSDT.
*/
ACPI_INIT_GLOBAL(u8, acpi_gbl_copy_dsdt_locally, FALSE);
/*
* Optionally ignore an XSDT if present and use the RSDT instead.
* Although the ACPI specification requires that an XSDT be used instead
* of the RSDT, the XSDT has been found to be corrupt or ill-formed on
* some machines. Default behavior is to use the XSDT if present.
*/
ACPI_INIT_GLOBAL(u8, acpi_gbl_do_not_use_xsdt, FALSE);
/*
* Optionally use 32-bit FADT addresses if and when there is a conflict
* (address mismatch) between the 32-bit and 64-bit versions of the
* address. Although ACPICA adheres to the ACPI specification which
* requires the use of the corresponding 64-bit address if it is non-zero,
* some machines have been found to have a corrupted non-zero 64-bit
* address. Default is TRUE, favor the 32-bit addresses.
*/
ACPI_INIT_GLOBAL(u8, acpi_gbl_use32_bit_fadt_addresses, TRUE);
/*
* Optionally truncate I/O addresses to 16 bits. Provides compatibility
* with other ACPI implementations. NOTE: During ACPICA initialization,
* this value is set to TRUE if any Windows OSI strings have been
* requested by the BIOS.
*/
ACPI_INIT_GLOBAL(u8, acpi_gbl_truncate_io_addresses, FALSE);
/*
* Disable runtime checking and repair of values returned by control methods.
* Use only if the repair is causing a problem on a particular machine.
*/
ACPI_INIT_GLOBAL(u8, acpi_gbl_disable_auto_repair, FALSE);
/*
* Optionally do not load any SSDTs from the RSDT/XSDT during initialization.
* This can be useful for debugging ACPI problems on some machines.
*/
ACPI_INIT_GLOBAL(u8, acpi_gbl_disable_ssdt_table_load, FALSE);
/*
* We keep track of the latest version of Windows that has been requested by
* the BIOS.
*/
ACPI_INIT_GLOBAL(u8, acpi_gbl_osi_data, 0);
#endif /* DEFINE_ACPI_GLOBALS */
/*****************************************************************************