Commit 3238e9c9 authored by Anton Blanchard's avatar Anton Blanchard Committed by Paul Mackerras
Browse files

[PATCH] ppc64: indent pci code



Fix up some badly indented code.
Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent 26370322
......@@ -252,7 +252,7 @@ unsigned long __init find_and_init_phbs(void)
phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL);
if (phb == NULL)
return -ENOMEM;
pci_setup_pci_controller(phb);
pci_setup_pci_controller(phb);
phb->pci_mem_offset = phb->local_number = bus;
phb->first_busno = bus;
......
......@@ -283,7 +283,7 @@ static void __init setup_u3_agp(struct pci_controller* hose)
* the reg address cell, we shall fix that by killing struct
* reg_property and using some accessor functions instead
*/
hose->first_busno = 0xf0;
hose->first_busno = 0xf0;
hose->last_busno = 0xff;
hose->ops = &u3_agp_pci_ops;
hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
......@@ -315,24 +315,24 @@ static int __init add_bridge(struct device_node *dev)
char* disp_name;
int *bus_range;
int primary = 1;
struct property *of_prop;
struct property *of_prop;
DBG("Adding PCI host bridge %s\n", dev->full_name);
bus_range = (int *) get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
dev->full_name);
}
bus_range = (int *) get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
dev->full_name);
}
hose = alloc_bootmem(sizeof(struct pci_controller));
if (hose == NULL)
return -ENOMEM;
pci_setup_pci_controller(hose);
pci_setup_pci_controller(hose);
hose->arch_data = dev;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
hose->arch_data = dev;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
of_prop = alloc_bootmem(sizeof(struct property) +
sizeof(hose->global_number));
......@@ -346,25 +346,25 @@ static int __init add_bridge(struct device_node *dev)
}
disp_name = NULL;
if (device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
primary = 0;
} else if (device_is_compatible(dev, "u3-ht")) {
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
}
printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
disp_name, hose->first_busno, hose->last_busno);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pci_process_bridge_OF_ranges(hose, dev);
if (device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
primary = 0;
} else if (device_is_compatible(dev, "u3-ht")) {
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
}
printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
disp_name, hose->first_busno, hose->last_busno);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pci_process_bridge_OF_ranges(hose, dev);
pci_setup_phb_io(hose, primary);
/* Fixup "bus-range" OF property */
fixup_bus_range(dev);
/* Fixup "bus-range" OF property */
fixup_bus_range(dev);
return 0;
}
......
......@@ -388,7 +388,7 @@ static void __init setup_u3_agp(struct pci_controller* hose)
* the reg address cell, we shall fix that by killing struct
* reg_property and using some accessor functions instead
*/
hose->first_busno = 0xf0;
hose->first_busno = 0xf0;
hose->last_busno = 0xff;
has_uninorth = 1;
hose->ops = &macrisc_pci_ops;
......@@ -473,7 +473,7 @@ static void __init setup_u3_ht(struct pci_controller* hose)
continue;
}
cur++;
DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n",
DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n",
cur-1, res->start - 1, cur, res->end + 1);
hose->mem_resources[cur].name = np->full_name;
hose->mem_resources[cur].flags = IORESOURCE_MEM;
......@@ -603,24 +603,24 @@ static int __init add_bridge(struct device_node *dev)
char* disp_name;
int *bus_range;
int primary = 1;
struct property *of_prop;
struct property *of_prop;
DBG("Adding PCI host bridge %s\n", dev->full_name);
bus_range = (int *) get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
dev->full_name);
}
bus_range = (int *) get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
dev->full_name);
}
hose = alloc_bootmem(sizeof(struct pci_controller));
if (hose == NULL)
return -ENOMEM;
pci_setup_pci_controller(hose);
pci_setup_pci_controller(hose);
hose->arch_data = dev;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
hose->arch_data = dev;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
of_prop = alloc_bootmem(sizeof(struct property) +
sizeof(hose->global_number));
......@@ -634,24 +634,24 @@ static int __init add_bridge(struct device_node *dev)
}
disp_name = NULL;
if (device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
primary = 0;
} else if (device_is_compatible(dev, "u3-ht")) {
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
}
printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
disp_name, hose->first_busno, hose->last_busno);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pmac_process_bridge_OF_ranges(hose, dev, primary);
/* Fixup "bus-range" OF property */
fixup_bus_range(dev);
if (device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
primary = 0;
} else if (device_is_compatible(dev, "u3-ht")) {
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
}
printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
disp_name, hose->first_busno, hose->last_busno);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pmac_process_bridge_OF_ranges(hose, dev, primary);
/* Fixup "bus-range" OF property */
fixup_bus_range(dev);
return 0;
}
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment