Commit aff2a525 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO fixes from Greg KH:
 "Here are a number of small staging and IIO driver fixes for reported
  issues for 5.5-rc2

  Nothing major, a bunch of tiny IIO driver issues resolved, and some
  staging driver fixes for things that people ran into with 5.5-rc1.
  Full details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
  fbtft: Fix the initialization from property algorithm
  staging: rtl8712: fix interface sanity check
  staging: rtl8188eu: fix interface sanity check
  staging: gigaset: add endpoint-type sanity check
  staging: gigaset: fix illegal free on probe errors
  staging: gigaset: fix general protection fault on probe
  staging: vchiq: call unregister_chrdev_region() when driver registration fails
  staging: exfat: fix multiple definition error of `rename_file'
  staging/wlan-ng: add CRC32 dependency in Kconfig
  staging: hp100: Fix build error without ETHERNET
  staging: fbtft: Do not hardcode SPI CS polarity inversion
  staging: exfat: properly support discard in clr_alloc_bitmap()
  staging/octeon: Mark Ethernet driver as BROKEN
  iio: adc: max9611: Fix too short conversion time delay
  iio: ad7949: fix channels mixups
  iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
  iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
  iio: imu: st_lsm6dsx: fix decimation factor estimation
  iio: imu: inv_mpu6050: fix temperature reporting using bad unit
  iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
  ...
parents a1b85b3b 4bcd9eae
# SPDX-License-Identifier: GPL-2.0-only
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml#
......@@ -53,7 +53,8 @@ patternProperties:
description: |
The channel number. It can have up to 8 channels numbered from 0 to 7.
items:
maximum: 7
- minimum: 0
maximum: 7
diff-channels:
description: see Documentation/devicetree/bindings/iio/adc/adc.txt
......
......@@ -992,6 +992,7 @@ static const struct iio_trigger_ops st_accel_trigger_ops = {
#define ST_ACCEL_TRIGGER_OPS NULL
#endif
#ifdef CONFIG_ACPI
static const struct iio_mount_matrix *
get_mount_matrix(const struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
......@@ -1012,7 +1013,6 @@ static const struct iio_chan_spec_ext_info mount_matrix_ext_info[] = {
static int apply_acpi_orientation(struct iio_dev *indio_dev,
struct iio_chan_spec *channels)
{
#ifdef CONFIG_ACPI
struct st_sensor_data *adata = iio_priv(indio_dev);
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
struct acpi_device *adev;
......@@ -1140,10 +1140,14 @@ static int apply_acpi_orientation(struct iio_dev *indio_dev,
out:
kfree(buffer.pointer);
return ret;
}
#else /* !CONFIG_ACPI */
static int apply_acpi_orientation(struct iio_dev *indio_dev,
struct iio_chan_spec *channels)
{
return 0;
#endif
}
#endif
/*
* st_accel_get_settings() - get sensor settings from device name
......
......@@ -39,6 +39,8 @@
#define AD7124_STATUS_POR_FLAG_MSK BIT(4)
/* AD7124_ADC_CONTROL */
#define AD7124_ADC_CTRL_REF_EN_MSK BIT(8)
#define AD7124_ADC_CTRL_REF_EN(x) FIELD_PREP(AD7124_ADC_CTRL_REF_EN_MSK, x)
#define AD7124_ADC_CTRL_PWR_MSK GENMASK(7, 6)
#define AD7124_ADC_CTRL_PWR(x) FIELD_PREP(AD7124_ADC_CTRL_PWR_MSK, x)
#define AD7124_ADC_CTRL_MODE_MSK GENMASK(5, 2)
......@@ -424,7 +426,10 @@ static int ad7124_init_channel_vref(struct ad7124_state *st,
break;
case AD7124_INT_REF:
st->channel_config[channel_number].vref_mv = 2500;
break;
st->adc_control &= ~AD7124_ADC_CTRL_REF_EN_MSK;
st->adc_control |= AD7124_ADC_CTRL_REF_EN(1);
return ad_sd_write_reg(&st->sd, AD7124_ADC_CONTROL,
2, st->adc_control);
default:
dev_err(&st->sd.spi->dev, "Invalid reference %d\n", refsel);
return -EINVAL;
......
......@@ -85,7 +85,7 @@ static int ad7606_reg_access(struct iio_dev *indio_dev,
static int ad7606_read_samples(struct ad7606_state *st)
{
unsigned int num = st->chip_info->num_channels;
unsigned int num = st->chip_info->num_channels - 1;
u16 *data = st->data;
int ret;
......
......@@ -89,6 +89,7 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
unsigned int channel)
{
int ret;
int i;
int bits_per_word = ad7949_adc->resolution;
int mask = GENMASK(ad7949_adc->resolution, 0);
struct spi_message msg;
......@@ -100,12 +101,23 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
},
};
ret = ad7949_spi_write_cfg(ad7949_adc,
channel << AD7949_OFFSET_CHANNEL_SEL,
AD7949_MASK_CHANNEL_SEL);
if (ret)
return ret;
/*
* 1: write CFG for sample N and read old data (sample N-2)
* 2: if CFG was not changed since sample N-1 then we'll get good data
* at the next xfer, so we bail out now, otherwise we write something
* and we read garbage (sample N-1 configuration).
*/
for (i = 0; i < 2; i++) {
ret = ad7949_spi_write_cfg(ad7949_adc,
channel << AD7949_OFFSET_CHANNEL_SEL,
AD7949_MASK_CHANNEL_SEL);
if (ret)
return ret;
if (channel == ad7949_adc->current_channel)
break;
}
/* 3: write something and read actual data */
ad7949_adc->buffer = 0;
spi_message_init_with_transfers(&msg, tx, 1);
ret = spi_sync(ad7949_adc->spi, &msg);
......
......@@ -185,7 +185,7 @@ static int mrfld_adc_probe(struct platform_device *pdev)
int irq;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*indio_dev));
indio_dev = devm_iio_device_alloc(dev, sizeof(struct mrfld_adc));
if (!indio_dev)
return -ENOMEM;
......
......@@ -478,7 +478,13 @@ static int max1027_probe(struct spi_device *spi)
st->trig->ops = &max1027_trigger_ops;
st->trig->dev.parent = &spi->dev;
iio_trigger_set_drvdata(st->trig, indio_dev);
iio_trigger_register(st->trig);
ret = devm_iio_trigger_register(&indio_dev->dev,
st->trig);
if (ret < 0) {
dev_err(&indio_dev->dev,
"Failed to register iio trigger\n");
return ret;
}
ret = devm_request_threaded_irq(&spi->dev, spi->irq,
iio_trigger_generic_data_rdy_poll,
......
......@@ -89,6 +89,12 @@
#define MAX9611_TEMP_SCALE_NUM 1000000
#define MAX9611_TEMP_SCALE_DIV 2083
/*
* Conversion time is 2 ms (typically) at Ta=25 degreeC
* No maximum value is known, so play it safe.
*/
#define MAX9611_CONV_TIME_US_RANGE 3000, 3300
struct max9611_dev {
struct device *dev;
struct i2c_client *i2c_client;
......@@ -236,11 +242,9 @@ static int max9611_read_single(struct max9611_dev *max9611,
return ret;
}
/*
* need a delay here to make register configuration
* stabilize. 1 msec at least, from empirical testing.
*/
usleep_range(1000, 2000);
/* need a delay here to make register configuration stabilize. */
usleep_range(MAX9611_CONV_TIME_US_RANGE);
ret = i2c_smbus_read_word_swapped(max9611->i2c_client, reg_addr);
if (ret < 0) {
......@@ -507,7 +511,7 @@ static int max9611_init(struct max9611_dev *max9611)
MAX9611_REG_CTRL2, 0);
return ret;
}
usleep_range(1000, 2000);
usleep_range(MAX9611_CONV_TIME_US_RANGE);
return 0;
}
......
......@@ -229,7 +229,7 @@ static int hdc100x_read_raw(struct iio_dev *indio_dev,
*val2 = 65536;
return IIO_VAL_FRACTIONAL;
} else {
*val = 100;
*val = 100000;
*val2 = 65536;
return IIO_VAL_FRACTIONAL;
}
......
......@@ -117,6 +117,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6050,
.config = &chip_config_6050,
.fifo_size = 1024,
.temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
},
{
.whoami = INV_MPU6500_WHOAMI_VALUE,
......@@ -124,6 +125,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6500,
.config = &chip_config_6050,
.fifo_size = 512,
.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
},
{
.whoami = INV_MPU6515_WHOAMI_VALUE,
......@@ -131,6 +133,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6500,
.config = &chip_config_6050,
.fifo_size = 512,
.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
},
{
.whoami = INV_MPU6000_WHOAMI_VALUE,
......@@ -138,6 +141,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6050,
.config = &chip_config_6050,
.fifo_size = 1024,
.temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
},
{
.whoami = INV_MPU9150_WHOAMI_VALUE,
......@@ -145,6 +149,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6050,
.config = &chip_config_6050,
.fifo_size = 1024,
.temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
},
{
.whoami = INV_MPU9250_WHOAMI_VALUE,
......@@ -152,6 +157,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6500,
.config = &chip_config_6050,
.fifo_size = 512,
.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
},
{
.whoami = INV_MPU9255_WHOAMI_VALUE,
......@@ -159,6 +165,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6500,
.config = &chip_config_6050,
.fifo_size = 512,
.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
},
{
.whoami = INV_ICM20608_WHOAMI_VALUE,
......@@ -166,6 +173,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6500,
.config = &chip_config_6050,
.fifo_size = 512,
.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
},
{
.whoami = INV_ICM20602_WHOAMI_VALUE,
......@@ -173,6 +181,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_icm20602,
.config = &chip_config_6050,
.fifo_size = 1008,
.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
},
};
......@@ -481,12 +490,8 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
*val = 0;
if (st->chip_type == INV_ICM20602)
*val2 = INV_ICM20602_TEMP_SCALE;
else
*val2 = INV_MPU6050_TEMP_SCALE;
*val = st->hw->temp.scale / 1000000;
*val2 = st->hw->temp.scale % 1000000;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_MAGN:
return inv_mpu_magn_get_scale(st, chan, val, val2);
......@@ -496,11 +501,7 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_OFFSET:
switch (chan->type) {
case IIO_TEMP:
if (st->chip_type == INV_ICM20602)
*val = INV_ICM20602_TEMP_OFFSET;
else
*val = INV_MPU6050_TEMP_OFFSET;
*val = st->hw->temp.offset;
return IIO_VAL_INT;
default:
return -EINVAL;
......
......@@ -107,6 +107,7 @@ struct inv_mpu6050_chip_config {
* @reg: register map of the chip.
* @config: configuration of the chip.
* @fifo_size: size of the FIFO in bytes.
* @temp: offset and scale to apply to raw temperature.
*/
struct inv_mpu6050_hw {
u8 whoami;
......@@ -114,6 +115,10 @@ struct inv_mpu6050_hw {
const struct inv_mpu6050_reg_map *reg;
const struct inv_mpu6050_chip_config *config;
size_t fifo_size;
struct {
int offset;
int scale;
} temp;
};
/*
......@@ -279,16 +284,19 @@ struct inv_mpu6050_state {
#define INV_MPU6050_REG_UP_TIME_MIN 5000
#define INV_MPU6050_REG_UP_TIME_MAX 10000
#define INV_MPU6050_TEMP_OFFSET 12421
#define INV_MPU6050_TEMP_SCALE 2941
#define INV_MPU6050_TEMP_OFFSET 12420
#define INV_MPU6050_TEMP_SCALE 2941176
#define INV_MPU6050_MAX_GYRO_FS_PARAM 3
#define INV_MPU6050_MAX_ACCL_FS_PARAM 3
#define INV_MPU6050_THREE_AXIS 3
#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3
#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3
#define INV_ICM20602_TEMP_OFFSET 8170
#define INV_ICM20602_TEMP_SCALE 3060
#define INV_MPU6500_TEMP_OFFSET 7011
#define INV_MPU6500_TEMP_SCALE 2995178
#define INV_ICM20608_TEMP_OFFSET 8170
#define INV_ICM20608_TEMP_SCALE 3059976
/* 6 + 6 + 7 (for MPU9x50) = 19 round up to 24 and plus 8 */
#define INV_MPU6050_OUTPUT_DATA_SIZE 32
......
......@@ -320,7 +320,6 @@ enum st_lsm6dsx_fifo_mode {
* @odr: Output data rate of the sensor [Hz].
* @watermark: Sensor watermark level.
* @sip: Number of samples in a given pattern.
* @decimator: FIFO decimation factor.
* @ts_ref: Sensor timestamp reference for hw one.
* @ext_info: Sensor settings if it is connected to i2c controller
*/
......@@ -334,7 +333,6 @@ struct st_lsm6dsx_sensor {
u16 watermark;
u8 sip;
u8 decimator;
s64 ts_ref;
struct {
......@@ -351,9 +349,9 @@ struct st_lsm6dsx_sensor {
* @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
* @conf_lock: Mutex to prevent concurrent FIFO configuration update.
* @page_lock: Mutex to prevent concurrent memory page configuration.
* @fifo_mode: FIFO operating mode supported by the device.
* @suspend_mask: Suspended sensor bitmask.
* @enable_mask: Enabled sensor bitmask.
* @fifo_mask: Enabled hw FIFO bitmask.
* @ts_gain: Hw timestamp rate after internal calibration.
* @ts_sip: Total number of timestamp samples in a given pattern.
* @sip: Total number of samples (acc/gyro/ts) in a given pattern.
......@@ -373,9 +371,9 @@ struct st_lsm6dsx_hw {
struct mutex conf_lock;
struct mutex page_lock;
enum st_lsm6dsx_fifo_mode fifo_mode;
u8 suspend_mask;
u8 enable_mask;
u8 fifo_mask;
s64 ts_gain;
u8 ts_sip;
u8 sip;
......
......@@ -78,14 +78,20 @@ struct st_lsm6dsx_decimator_entry st_lsm6dsx_decimator_table[] = {
{ 32, 0x7 },
};
static int st_lsm6dsx_get_decimator_val(u8 val)
static int
st_lsm6dsx_get_decimator_val(struct st_lsm6dsx_sensor *sensor, u32 max_odr)
{
const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table);
u32 decimator = max_odr / sensor->odr;
int i;
for (i = 0; i < max_size; i++)
if (st_lsm6dsx_decimator_table[i].decimator == val)
if (decimator > 1)
decimator = round_down(decimator, 2);
for (i = 0; i < max_size; i++) {
if (st_lsm6dsx_decimator_table[i].decimator == decimator)
break;
}
return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
}
......@@ -111,6 +117,13 @@ static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw,
}
}
static u8 st_lsm6dsx_get_sip(struct st_lsm6dsx_sensor *sensor, u32 min_odr)
{
u8 sip = sensor->odr / min_odr;
return sip > 1 ? round_down(sip, 2) : sip;
}
static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
{
const struct st_lsm6dsx_reg *ts_dec_reg;
......@@ -131,12 +144,10 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
sensor = iio_priv(hw->iio_devs[i]);
/* update fifo decimators and sample in pattern */
if (hw->enable_mask & BIT(sensor->id)) {
sensor->sip = sensor->odr / min_odr;
sensor->decimator = max_odr / sensor->odr;
data = st_lsm6dsx_get_decimator_val(sensor->decimator);
sensor->sip = st_lsm6dsx_get_sip(sensor, min_odr);
data = st_lsm6dsx_get_decimator_val(sensor, max_odr);
} else {
sensor->sip = 0;
sensor->decimator = 0;
data = 0;
}
ts_sip = max_t(u16, ts_sip, sensor->sip);
......@@ -176,17 +187,10 @@ int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
enum st_lsm6dsx_fifo_mode fifo_mode)
{
unsigned int data;
int err;
data = FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK, fifo_mode);
err = st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
ST_LSM6DSX_FIFO_MODE_MASK, data);
if (err < 0)
return err;
hw->fifo_mode = fifo_mode;
return 0;
return st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
ST_LSM6DSX_FIFO_MODE_MASK, data);
}
static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
......@@ -608,11 +612,17 @@ int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw)
int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
{
struct st_lsm6dsx_hw *hw = sensor->hw;
u8 fifo_mask;
int err;
mutex_lock(&hw->conf_lock);
if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS) {
if (enable)
fifo_mask = hw->fifo_mask | BIT(sensor->id);
else
fifo_mask = hw->fifo_mask & ~BIT(sensor->id);
if (hw->fifo_mask) {
err = st_lsm6dsx_flush_fifo(hw);
if (err < 0)
goto out;
......@@ -642,15 +652,19 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
if (err < 0)
goto out;
if (hw->enable_mask) {
if (fifo_mask) {
/* reset hw ts counter */
err = st_lsm6dsx_reset_hw_ts(hw);
if (err < 0)
goto out;
err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
if (err < 0)
goto out;
}
hw->fifo_mask = fifo_mask;
out:
mutex_unlock(&hw->conf_lock);
......
......@@ -1447,8 +1447,9 @@ st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u32 req_odr)
return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
}
int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
bool enable)
static int
__st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
bool enable)
{
struct st_lsm6dsx_hw *hw = sensor->hw;
u32 odr = enable ? sensor->odr : 0;
......@@ -1466,6 +1467,26 @@ int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
return 0;
}
static int
st_lsm6dsx_check_events(struct st_lsm6dsx_sensor *sensor, bool enable)
{
struct st_lsm6dsx_hw *hw = sensor->hw;
if (sensor->id == ST_LSM6DSX_ID_GYRO || enable)
return 0;
return hw->enable_event;
}
int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
bool enable)
{
if (st_lsm6dsx_check_events(sensor, enable))
return 0;
return __st_lsm6dsx_sensor_set_enable(sensor, enable);
}
static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor,
u8 addr, int *val)
{
......@@ -1661,7 +1682,7 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
struct st_lsm6dsx_hw *hw = sensor->hw;
u8 enable_event;
int err = 0;
int err;
if (type != IIO_EV_TYPE_THRESH)
return -EINVAL;
......@@ -1689,7 +1710,8 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
return err;
mutex_lock(&hw->conf_lock);
err = st_lsm6dsx_sensor_set_enable(sensor, state);
if (enable_event || !(hw->fifo_mask & BIT(sensor->id)))
err = __st_lsm6dsx_sensor_set_enable(sensor, state);
mutex_unlock(&hw->conf_lock);
if (err < 0)
return err;
......@@ -2300,7 +2322,7 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
hw->suspend_mask |= BIT(sensor->id);
}
if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS)
if (hw->fifo_mask)
err = st_lsm6dsx_flush_fifo(hw);
return err;
......@@ -2336,7 +2358,7 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
hw->suspend_mask &= ~BIT(sensor->id);
}
if (hw->enable_mask)
if (hw->fifo_mask)
err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
return err;
......
......@@ -444,8 +444,10 @@ static struct ltc2983_custom_sensor *__ltc2983_custom_sensor_new(
else
temp = __convert_to_raw(temp, resolution);
} else {
of_property_read_u32_index(np, propname, index,
(u32 *)&temp);
u32 t32;
of_property_read_u32_index(np, propname, index, &t32);
temp = t32;
}
for (j = 0; j < n_size; j++)
......
......@@ -805,8 +805,8 @@ s32 create_dir(struct inode *inode, struct chain_t *p_dir,
s32 create_file(struct inode *inode, struct chain_t *p_dir,
struct uni_name_t *p_uniname, u8 mode, struct file_id_t *fid);
void remove_file(struct inode *inode, struct chain_t *p_dir, s32 entry);
s32 rename_file(struct inode *inode, struct chain_t *p_dir, s32 old_entry,
struct uni_name_t *p_uniname, struct file_id_t *fid);
s32 exfat_rename_file(struct inode *inode, struct chain_t *p_dir, s32 old_entry,
struct uni_name_t *p_uniname, struct file_id_t *fid);
s32 move_file(struct inode *inode, struct chain_t *p_olddir, s32 oldentry,
struct chain_t *p_newdir, struct uni_name_t *p_uniname,
struct file_id_t *fid);
......
......@@ -192,8 +192,6 @@ static s32 clr_alloc_bitmap(struct super_block *sb, u32 clu)
exfat_bitmap_clear((u8 *)p_fs->vol_amap[i]->b_data, b);
return sector_write(sb, sector, p_fs->vol_amap[i], 0);
#ifdef CONFIG_EXFAT_DISCARD
if (opts->discard) {
ret = sb_issue_discard(sb, START_SECTOR(clu),
......@@ -202,9 +200,13 @@ static s32 clr_alloc_bitmap(struct super_block *sb, u32 clu)
if (ret == -EOPNOTSUPP) {
pr_warn("discard not supported by device, disabling");
opts->discard = 0;
} else {
return ret;
}
}
#endif /* CONFIG_EXFAT_DISCARD */
return sector_write(sb, sector, p_fs->vol_amap[i], 0);
}
static u32 test_alloc_bitmap(struct super_block *sb, u32 clu)
......@@ -2322,8 +2324,8 @@ void remove_file(struct inode *inode, struct chain_t *p_dir, s32 entry)
fs_func->delete_dir_entry(sb, p_dir, entry, 0, num_entries);
}
s32 rename_file(struct inode *inode, struct chain_t *p_dir, s32 oldentry,
struct uni_name_t *p_uniname, struct file_id_t *fid)
s32 exfat_rename_file(struct inode *inode, struct chain_t *p_dir, s32 oldentry,
struct uni_name_t *p_uniname, struct file_id_t *fid)
{
s32 ret, newentry = -1, num_old_entries, num_new_entries;
sector_t sector_old, sector_new;
......
......@@ -1262,8 +1262,8 @@ static int ffsMoveFile(struct inode *old_parent_inode, struct file_id_t *fid,
fs_set_vol_flags(sb, VOL_DIRTY);
if (olddir.dir == newdir.dir)