Commit b1eea857 authored by Aaron Lu's avatar Aaron Lu Committed by Rafael J. Wysocki

ACPI / PMIC: support PMIC operation region for CrystalCove

The Baytrail-T platform firmware has defined two customized operation
regions for PMIC chip Crystal Cove - one is for power resource handling
and one is for thermal: sensor temperature reporting, trip point setting,
etc. This patch adds support for them on top of the existing Crystal Cove
PMIC driver.

The reason to split code into a separate file intel_pmic.c is that there
are more PMIC drivers with ACPI operation region support coming and we can
re-use those code. The intel_pmic_opregion_data structure is created also
for this purpose: when we need to support a new PMIC's operation region,
we just need to fill those callbacks and the two register mapping tables.
Signed-off-by: default avatarAaron Lu <aaron.lu@intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org> for the MFD part
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
parent a26033a1
......@@ -394,4 +394,21 @@ config ACPI_EXTLOG
driver adds support for that functionality with corresponding
tracepoint which carries that information to userspace.
menuconfig PMIC_OPREGION
bool "PMIC (Power Management Integrated Circuit) operation region support"
help
Select this option to enable support for ACPI operation
region of the PMIC chip. The operation region can be used
to control power rails and sensor reading/writing on the
PMIC chip.
if PMIC_OPREGION
config CRC_PMIC_OPREGION
bool "ACPI operation region support for CrystalCove PMIC"
depends on INTEL_SOC_PMIC
help
This config adds ACPI operation region support for CrystalCove PMIC.
endif
endif # ACPI
......@@ -87,3 +87,6 @@ obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
obj-$(CONFIG_ACPI_APEI) += apei/
obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o
obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o
obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
/*
* intel_pmic.c - Intel PMIC operation region driver
*
* Copyright (C) 2014 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/regmap.h>
#include "intel_pmic.h"
#define PMIC_POWER_OPREGION_ID 0x8d
#define PMIC_THERMAL_OPREGION_ID 0x8c
struct acpi_lpat {
int temp;
int raw;
};
struct intel_pmic_opregion {
struct mutex lock;
struct acpi_lpat *lpat;
int lpat_count;
struct regmap *regmap;
struct intel_pmic_opregion_data *data;
};
static int pmic_get_reg_bit(int address, struct pmic_table *table,
int count, int *reg, int *bit)
{
int i;
for (i = 0; i < count; i++) {
if (table[i].address == address) {
*reg = table[i].reg;
if (bit)
*bit = table[i].bit;
return 0;
}
}
return -ENOENT;
}
/**
* raw_to_temp(): Return temperature from raw value through LPAT table
*
* @lpat: the temperature_raw mapping table
* @count: the count of the above mapping table
* @raw: the raw value, used as a key to get the temerature from the
* above mapping table
*
* A positive value will be returned on success, a negative errno will
* be returned in error cases.
*/
static int raw_to_temp(struct acpi_lpat *lpat, int count, int raw)
{
int i, delta_temp, delta_raw, temp;
for (i = 0; i < count - 1; i++) {
if ((raw >= lpat[i].raw && raw <= lpat[i+1].raw) ||
(raw <= lpat[i].raw && raw >= lpat[i+1].raw))
break;
}
if (i == count - 1)
return -ENOENT;
delta_temp = lpat[i+1].temp - lpat[i].temp;
delta_raw = lpat[i+1].raw - lpat[i].raw;
temp = lpat[i].temp + (raw - lpat[i].raw) * delta_temp / delta_raw;
return temp;
}
/**
* temp_to_raw(): Return raw value from temperature through LPAT table
*
* @lpat: the temperature_raw mapping table
* @count: the count of the above mapping table
* @temp: the temperature, used as a key to get the raw value from the
* above mapping table
*
* A positive value will be returned on success, a negative errno will
* be returned in error cases.
*/
static int temp_to_raw(struct acpi_lpat *lpat, int count, int temp)
{
int i, delta_temp, delta_raw, raw;
for (i = 0; i < count - 1; i++) {
if (temp >= lpat[i].temp && temp <= lpat[i+1].temp)
break;
}
if (i == count - 1)
return -ENOENT;
delta_temp = lpat[i+1].temp - lpat[i].temp;
delta_raw = lpat[i+1].raw - lpat[i].raw;
raw = lpat[i].raw + (temp - lpat[i].temp) * delta_raw / delta_temp;
return raw;
}
static void pmic_thermal_lpat(struct intel_pmic_opregion *opregion,
acpi_handle handle, struct device *dev)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj_p, *obj_e;
int *lpat, i;
acpi_status status;
status = acpi_evaluate_object(handle, "LPAT", NULL, &buffer);
if (ACPI_FAILURE(status))
return;
obj_p = (union acpi_object *)buffer.pointer;
if (!obj_p || (obj_p->type != ACPI_TYPE_PACKAGE) ||
(obj_p->package.count % 2) || (obj_p->package.count < 4))
goto out;
lpat = devm_kmalloc(dev, sizeof(int) * obj_p->package.count,
GFP_KERNEL);
if (!lpat)
goto out;
for (i = 0; i < obj_p->package.count; i++) {
obj_e = &obj_p->package.elements[i];
if (obj_e->type != ACPI_TYPE_INTEGER) {
devm_kfree(dev, lpat);
goto out;
}
lpat[i] = (s64)obj_e->integer.value;
}
opregion->lpat = (struct acpi_lpat *)lpat;
opregion->lpat_count = obj_p->package.count / 2;
out:
kfree(buffer.pointer);
}
static acpi_status intel_pmic_power_handler(u32 function,
acpi_physical_address address, u32 bits, u64 *value64,
void *handler_context, void *region_context)
{
struct intel_pmic_opregion *opregion = region_context;
struct regmap *regmap = opregion->regmap;
struct intel_pmic_opregion_data *d = opregion->data;
int reg, bit, result;
if (bits != 32 || !value64)
return AE_BAD_PARAMETER;
if (function == ACPI_WRITE && !(*value64 == 0 || *value64 == 1))
return AE_BAD_PARAMETER;
result = pmic_get_reg_bit(address, d->power_table,
d->power_table_count, &reg, &bit);
if (result == -ENOENT)
return AE_BAD_PARAMETER;
mutex_lock(&opregion->lock);
result = function == ACPI_READ ?
d->get_power(regmap, reg, bit, value64) :
d->update_power(regmap, reg, bit, *value64 == 1);
mutex_unlock(&opregion->lock);
return result ? AE_ERROR : AE_OK;
}
static int pmic_read_temp(struct intel_pmic_opregion *opregion,
int reg, u64 *value)
{
int raw_temp, temp;
if (!opregion->data->get_raw_temp)
return -ENXIO;
raw_temp = opregion->data->get_raw_temp(opregion->regmap, reg);
if (raw_temp < 0)
return raw_temp;
if (!opregion->lpat) {
*value = raw_temp;
return 0;
}
temp = raw_to_temp(opregion->lpat, opregion->lpat_count, raw_temp);
if (temp < 0)
return temp;
*value = temp;
return 0;
}
static int pmic_thermal_temp(struct intel_pmic_opregion *opregion, int reg,
u32 function, u64 *value)
{
return function == ACPI_READ ?
pmic_read_temp(opregion, reg, value) : -EINVAL;
}
static int pmic_thermal_aux(struct intel_pmic_opregion *opregion, int reg,
u32 function, u64 *value)
{
int raw_temp;
if (function == ACPI_READ)
return pmic_read_temp(opregion, reg, value);
if (!opregion->data->update_aux)
return -ENXIO;
if (opregion->lpat) {
raw_temp = temp_to_raw(opregion->lpat, opregion->lpat_count,
*value);
if (raw_temp < 0)
return raw_temp;
} else {
raw_temp = *value;
}
return opregion->data->update_aux(opregion->regmap, reg, raw_temp);
}
static int pmic_thermal_pen(struct intel_pmic_opregion *opregion, int reg,
u32 function, u64 *value)
{
struct intel_pmic_opregion_data *d = opregion->data;
struct regmap *regmap = opregion->regmap;
if (!d->get_policy || !d->update_policy)
return -ENXIO;
if (function == ACPI_READ)
return d->get_policy(regmap, reg, value);
if (*value != 0 && *value != 1)
return -EINVAL;
return d->update_policy(regmap, reg, *value);
}
static bool pmic_thermal_is_temp(int address)
{
return (address <= 0x3c) && !(address % 12);
}
static bool pmic_thermal_is_aux(int address)
{
return (address >= 4 && address <= 0x40 && !((address - 4) % 12)) ||
(address >= 8 && address <= 0x44 && !((address - 8) % 12));
}
static bool pmic_thermal_is_pen(int address)
{
return address >= 0x48 && address <= 0x5c;
}
static acpi_status intel_pmic_thermal_handler(u32 function,
acpi_physical_address address, u32 bits, u64 *value64,
void *handler_context, void *region_context)
{
struct intel_pmic_opregion *opregion = region_context;
struct intel_pmic_opregion_data *d = opregion->data;
int reg, result;
if (bits != 32 || !value64)
return AE_BAD_PARAMETER;
result = pmic_get_reg_bit(address, d->thermal_table,
d->thermal_table_count, &reg, NULL);
if (result == -ENOENT)
return AE_BAD_PARAMETER;
mutex_lock(&opregion->lock);
if (pmic_thermal_is_temp(address))
result = pmic_thermal_temp(opregion, reg, function, value64);
else if (pmic_thermal_is_aux(address))
result = pmic_thermal_aux(opregion, reg, function, value64);
else if (pmic_thermal_is_pen(address))
result = pmic_thermal_pen(opregion, reg, function, value64);
else
result = -EINVAL;
mutex_unlock(&opregion->lock);
if (result < 0) {
if (result == -EINVAL)
return AE_BAD_PARAMETER;
else
return AE_ERROR;
}
return AE_OK;
}
int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
struct regmap *regmap,
struct intel_pmic_opregion_data *d)
{
acpi_status status;
struct intel_pmic_opregion *opregion;
if (!dev || !regmap || !d)
return -EINVAL;
if (!handle)
return -ENODEV;
opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL);
if (!opregion)
return -ENOMEM;
mutex_init(&opregion->lock);
opregion->regmap = regmap;
pmic_thermal_lpat(opregion, handle, dev);
status = acpi_install_address_space_handler(handle,
PMIC_POWER_OPREGION_ID,
intel_pmic_power_handler,
NULL, opregion);
if (ACPI_FAILURE(status))
return -ENODEV;
status = acpi_install_address_space_handler(handle,
PMIC_THERMAL_OPREGION_ID,
intel_pmic_thermal_handler,
NULL, opregion);
if (ACPI_FAILURE(status)) {
acpi_remove_address_space_handler(handle, PMIC_POWER_OPREGION_ID,
intel_pmic_power_handler);
return -ENODEV;
}
opregion->data = d;
return 0;
}
EXPORT_SYMBOL_GPL(intel_pmic_install_opregion_handler);
MODULE_LICENSE("GPL");
#ifndef __INTEL_PMIC_H
#define __INTEL_PMIC_H
struct pmic_table {
int address; /* operation region address */
int reg; /* corresponding thermal register */
int bit; /* control bit for power */
};
struct intel_pmic_opregion_data {
int (*get_power)(struct regmap *r, int reg, int bit, u64 *value);
int (*update_power)(struct regmap *r, int reg, int bit, bool on);
int (*get_raw_temp)(struct regmap *r, int reg);
int (*update_aux)(struct regmap *r, int reg, int raw_temp);
int (*get_policy)(struct regmap *r, int reg, u64 *value);
int (*update_policy)(struct regmap *r, int reg, int enable);
struct pmic_table *power_table;
int power_table_count;
struct pmic_table *thermal_table;
int thermal_table_count;
};
int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, struct regmap *regmap, struct intel_pmic_opregion_data *d);
#endif
/*
* intel_pmic_crc.c - Intel CrystalCove PMIC operation region driver
*
* Copyright (C) 2014 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/mfd/intel_soc_pmic.h>
#include <linux/regmap.h>
#include <linux/platform_device.h>
#include "intel_pmic.h"
#define PWR_SOURCE_SELECT BIT(1)
#define PMIC_A0LOCK_REG 0xc5
static struct pmic_table power_table[] = {
{
.address = 0x24,
.reg = 0x66,
.bit = 0x00,
},
{
.address = 0x48,
.reg = 0x5d,
.bit = 0x00,
},
};
static struct pmic_table thermal_table[] = {
{
.address = 0x00,
.reg = 0x75
},
{
.address = 0x04,
.reg = 0x95
},
{
.address = 0x08,
.reg = 0x97
},
{
.address = 0x0c,
.reg = 0x77
},
{
.address = 0x10,
.reg = 0x9a
},
{
.address = 0x14,
.reg = 0x9c
},
{
.address = 0x18,
.reg = 0x79
},
{
.address = 0x1c,
.reg = 0x9f
},
{
.address = 0x20,
.reg = 0xa1
},
{
.address = 0x48,
.reg = 0x94
},
{
.address = 0x4c,
.reg = 0x99
},
{
.address = 0x50,
.reg = 0x9e
},
};
static int intel_crc_pmic_get_power(struct regmap *regmap, int reg,
int bit, u64 *value)
{
int data;
if (regmap_read(regmap, reg, &data))
return -EIO;
*value = (data & PWR_SOURCE_SELECT) && (data & BIT(bit)) ? 1 : 0;
return 0;
}
static int intel_crc_pmic_update_power(struct regmap *regmap, int reg,
int bit, bool on)
{
int data;
if (regmap_read(regmap, reg, &data))
return -EIO;
if (on) {
data |= PWR_SOURCE_SELECT | BIT(bit);
} else {
data &= ~BIT(bit);
data |= PWR_SOURCE_SELECT;
}
if (regmap_write(regmap, reg, data))
return -EIO;
return 0;
}
static int intel_crc_pmic_get_raw_temp(struct regmap *regmap, int reg)
{
int temp_l, temp_h;
/*
* Raw temperature value is 10bits: 8bits in reg
* and 2bits in reg-1: bit0,1
*/
if (regmap_read(regmap, reg, &temp_l) ||
regmap_read(regmap, reg - 1, &temp_h))
return -EIO;
return temp_l | (temp_h & 0x3) << 8;
}
static int intel_crc_pmic_update_aux(struct regmap *regmap, int reg, int raw)
{
return regmap_write(regmap, reg, raw) ||
regmap_update_bits(regmap, reg - 1, 0x3, raw >> 8) ? -EIO : 0;
}
static int intel_crc_pmic_get_policy(struct regmap *regmap, int reg, u64 *value)
{
int pen;
if (regmap_read(regmap, reg, &pen))
return -EIO;
*value = pen >> 7;
return 0;
}
static int intel_crc_pmic_update_policy(struct regmap *regmap,
int reg, int enable)
{
int alert0;
/* Update to policy enable bit requires unlocking a0lock */
if (regmap_read(regmap, PMIC_A0LOCK_REG, &alert0))
return -EIO;
if (regmap_update_bits(regmap, PMIC_A0LOCK_REG, 0x01, 0))
return -EIO;
if (regmap_update_bits(regmap, reg, 0x80, enable << 7))
return -EIO;
/* restore alert0 */
if (regmap_write(regmap, PMIC_A0LOCK_REG, alert0))
return -EIO;
return 0;
}
static struct intel_pmic_opregion_data intel_crc_pmic_opregion_data = {
.get_power = intel_crc_pmic_get_power,
.update_power = intel_crc_pmic_update_power,
.get_raw_temp = intel_crc_pmic_get_raw_temp,
.update_aux = intel_crc_pmic_update_aux,
.get_policy = intel_crc_pmic_get_policy,
.update_policy = intel_crc_pmic_update_policy,
.power_table = power_table,
.power_table_count= ARRAY_SIZE(power_table),
.thermal_table = thermal_table,
.thermal_table_count = ARRAY_SIZE(thermal_table),
};
static int intel_crc_pmic_opregion_probe(struct platform_device *pdev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
return intel_pmic_install_opregion_handler(&pdev->dev,
ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
&intel_crc_pmic_opregion_data);
}
static struct platform_driver intel_crc_pmic_opregion_driver = {
.probe = intel_crc_pmic_opregion_probe,
.driver = {
.name = "crystal_cove_pmic",
},
};
static int __init intel_crc_pmic_opregion_driver_init(void)
{
return platform_driver_register(&intel_crc_pmic_opregion_driver);
}
module_init(intel_crc_pmic_opregion_driver_init);
MODULE_DESCRIPTION("CrystalCove ACPI opration region driver");
MODULE_LICENSE("GPL");
......@@ -106,6 +106,9 @@ static struct mfd_cell crystal_cove_dev[] = {
.num_resources = ARRAY_SIZE(gpio_resources),
.resources = gpio_resources,
},
{
.name = "crystal_cove_pmic",
},
};
static struct regmap_config crystal_cove_regmap_config = {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment