1. 06 May, 2007 10 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild · 15700770
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (38 commits)
        kconfig: fix mconf segmentation fault
        kbuild: enable use of code from a different dir
        kconfig: error out if recursive dependencies are found
        kbuild: scripts/basic/fixdep segfault on pathological string-o-death
        kconfig: correct minor typo in Kconfig warning message.
        kconfig: fix path to modules.txt in Kconfig help
        usr/Kconfig: fix typo
        kernel-doc: alphabetically-sorted entries in index.html of 'htmldocs'
        kbuild: be more explicit on missing .config file
        kbuild: clarify the creation of the LOCALVERSION_AUTO string.
        kbuild: propagate errors from find in scripts/gen_initramfs_list.sh
        kconfig: refer to qt3 if we cannot find qt libraries
        kbuild: handle compressed cpio initramfs-es
        kbuild: ignore section mismatch warning for references from .paravirtprobe to .init.text
        kbuild: remove stale comment in modpost.c
        kbuild/mkuboot.sh: allow spaces in CROSS_COMPILE
        kbuild: fix make mrproper for Documentation/DocBook/man
        kbuild: remove kconfig binaries during make mrproper
        kconfig/menuconfig: do not hardcode '.config'
        kbuild: override build timestamp & version
        ...
      15700770
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm · 6de410c2
      Linus Torvalds authored
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (66 commits)
        KVM: Remove unused 'instruction_length'
        KVM: Don't require explicit indication of completion of mmio or pio
        KVM: Remove extraneous guest entry on mmio read
        KVM: SVM: Only save/restore MSRs when needed
        KVM: fix an if() condition
        KVM: VMX: Add lazy FPU support for VT
        KVM: VMX: Properly shadow the CR0 register in the vcpu struct
        KVM: Don't complain about cpu erratum AA15
        KVM: Lazy FPU support for SVM
        KVM: Allow passing 64-bit values to the emulated read/write API
        KVM: Per-vcpu statistics
        KVM: VMX: Avoid unnecessary vcpu_load()/vcpu_put() cycles
        KVM: MMU: Avoid heavy ASSERT at non debug mode.
        KVM: VMX: Only save/restore MSR_K6_STAR if necessary
        KVM: Fold drivers/kvm/kvm_vmx.h into drivers/kvm/vmx.c
        KVM: VMX: Don't switch 64-bit msrs for 32-bit guests
        KVM: VMX: Reduce unnecessary saving of host msrs
        KVM: Handle guest page faults when emulating mmio
        KVM: SVM: Report hardware exit reason to userspace instead of dmesg
        KVM: Retry sleeping allocation if atomic allocation fails
        ...
      6de410c2
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm · c6799ade
      Linus Torvalds authored
      * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits)
        [ARM] Add comments marking in-use ptrace numbers
        [ARM] Move syscall saving out of the way of utrace
        [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro
        [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header
        [ARM] mm 10: allow memory type to be specified with ioremap
        [ARM] mm 9: add additional device memory types
        [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6
        [ARM] iop: add missing parens in macro
        [ARM] mm 7: remove duplicated __ioremap() prototypes
        ARM: OMAP: fix OMAP1 mpuio suspend/resume oops
        ARM: OMAP: MPUIO wake updates
        ARM: OMAP: speed up gpio irq handling
        ARM: OMAP: plat-omap changes for 2430 SDP
        ARM: OMAP: gpio object shrinkage, cleanup
        ARM: OMAP: /sys/kernel/debug/omap_gpio
        ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon
        ARM: OMAP: Enable 24xx GPIO autoidling
        [ARM] 4318/2: DSM-G600 Board Support
        [ARM] 4227/1: minor head.S fixups
        [ARM] 4328/1: Move i.MX UART regs to driver
        ...
      c6799ade
    • Russell King's avatar
      Merge branch 'ixp4xx' into devel · 5cd47155
      Russell King authored
      Conflicts:
      
      	include/asm-arm/arch-ixp4xx/io.h
      5cd47155
    • Russell King's avatar
      Merge branches 'arm-mm', 'at91', 'clkevts', 'imx', 'iop', 'misc', 'netx',... · 6f95416e
      Russell King authored
      Merge branches 'arm-mm', 'at91', 'clkevts', 'imx', 'iop', 'misc', 'netx', 'ns9xxx', 'omap', 'pxa', 'rpc', 's3c' and 'sa1100' into devel
      6f95416e
    • Russell King's avatar
    • Russell King's avatar
      [ARM] Move syscall saving out of the way of utrace · 5ba6d3fe
      Russell King authored
      
      
      utrace removes the ptrace_message field in task_struct.  Move our use
      of this field into a new member in thread_info called "syscall"
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      5ba6d3fe
    • Marcin Garski's avatar
      kconfig: fix mconf segmentation fault · 11de39e2
      Marcin Garski authored
      
      
      I have found small bug in mconf, when you run it without any argument it
      will sigsegv.
      
      Without patch:
      $ scripts/kconfig/mconf
      Segmentation fault
      
      With patch:
      $ scripts/kconfig/mconf
      can't find file (null)
      Signed-off-by: default avatarMarcin Garski <mgarski@post.pl>
      Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
      11de39e2
    • Sam Ravnborg's avatar
      kbuild: enable use of code from a different dir · 767e581d
      Sam Ravnborg authored
      
      
      To introduce support for source in one directory but output files
      in another directory during a non O= build prefix all paths
      with $(src) repsectively $(obj).
      Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
      767e581d
    • Sam Ravnborg's avatar
      kconfig: error out if recursive dependencies are found · 5447d34b
      Sam Ravnborg authored
      
      
      Sample:
      config FOO
      	bool "This is foo"
      	depends on BAR
      
      config BAR
      	bool "This is bar"
      	depends on FOO
      
      This will result in following error message:
      error: found recursive dependency: FOO -> BAR -> FOO
      
      And will then exit with exit code equal 1 so make will stop.
      Inspired by patch from: Adrian Bunk <bunk@stusta.de>
      Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Cc: Adrian Bunk <bunk@stusta.de>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      5447d34b
  2. 05 May, 2007 30 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 · b7405e16
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
        [CIFS] Fix typo in cifs readme from previous commit
        [CIFS] Make sec=none force an anonymous mount
        [CIFS] Change semaphore to mutex for cifs lock_sem
        [CIFS] Fix oops in reset_cifs_unix_caps on reconnect
        [CIFS] UID/GID override on CIFS mounts to Samba
        [CIFS] prefixpath mounts to servers supporting posix paths used wrong slash
        [CIFS] Update cifs version to 1.49
        [CIFS] Replace kmalloc/memset combination with kzalloc
        [CIFS]  Add IPv6 support
        [CIFS] New CIFS POSIX mkdir performance improvement (part 2)
        [CIFS] New CIFS POSIX mkdir performance improvement
        [CIFS] Add write perm for usr to file on windows should remove r/o dos attr
        [CIFS] Remove unnecessary parm to cifs_reopen_file
        [CIFS] Switch cifsd to kthread_run from kernel_thread
        [CIFS] Remove unnecessary checks
      b7405e16
    • Steve French's avatar
      0ec54aa8
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6 · ea62ccd0
      Linus Torvalds authored
      * 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
      
      : (231 commits)
        [PATCH] i386: Don't delete cpu_devs data to identify different x86 types in late_initcall
        [PATCH] i386: type may be unused
        [PATCH] i386: Some additional chipset register values validation.
        [PATCH] i386: Add missing !X86_PAE dependincy to the 2G/2G split.
        [PATCH] x86-64: Don't exclude asm-offsets.c in Documentation/dontdiff
        [PATCH] i386: avoid redundant preempt_disable in __unlazy_fpu
        [PATCH] i386: white space fixes in i387.h
        [PATCH] i386: Drop noisy e820 debugging printks
        [PATCH] x86-64: Fix allnoconfig error in genapic_flat.c
        [PATCH] x86-64: Shut up warnings for vfat compat ioctls on other file systems
        [PATCH] x86-64: Share identical video.S between i386 and x86-64
        [PATCH] x86-64: Remove CONFIG_REORDER
        [PATCH] x86-64: Print type and size correctly for unknown compat ioctls
        [PATCH] i386: Remove copy_*_user BUG_ONs for (size < 0)
        [PATCH] i386: Little cleanups in smpboot.c
        [PATCH] x86-64: Don't enable NUMA for a single node in K8 NUMA scanning
        [PATCH] x86: Use RDTSCP for synchronous get_cycles if possible
        [PATCH] i386: Add X86_FEATURE_RDTSCP
        [PATCH] i386: Implement X86_FEATURE_SYNC_RDTSC on i386
        [PATCH] i386: Implement alternative_io for i386
        ...
      
      Fix up trivial conflict in include/linux/highmem.h manually.
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ea62ccd0
    • Linus Torvalds's avatar
      Fix compile of tmscsim SCSI driver · 886a0768
      Linus Torvalds authored
      
      
      It still used the long-deprecated "pci_module_init()" interface, rather
      than the proper "pci_register_driver()" one.
      
      [ I don't have the hardware, and I doubt many do, but the fix is
        trivial and obvious, and can't be worse than not compiling ]
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      886a0768
    • Ralf Baechle's avatar
      Fix nfsroot build · 989485c1
      Ralf Baechle authored
      
      
        CC      fs/nfs/nfsroot.o
      fs/nfs/nfsroot.c:131: error: tokens causes a section type conflict
      make[2]: *** [fs/nfs/nfsroot.o] Error 1
      
      This is due to mixing const and non-const content in the same section
      which halfway recent gccs absolutely hate.  Fixed by dropping the const.
      Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      989485c1
    • Linus Torvalds's avatar
      Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 · 68762f3d
      Linus Torvalds authored
      * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
        [TG3]: Add TG3_FLAG_SUPPORT_MSI flag.
        [TG3]: Eliminate the TG3_FLAG_5701_REG_WRITE_BUG flag.
        [TG3]: Eliminate the TG3_FLAG_GOT_SERDES_FLOWCTL flag.
        [TG3]: Remove reset during MAC address changes.
        [TG3]: WoL fixes.
        [TG3]: Clear GPIO mask before storing.
        [TG3]: Improve NVRAM sizing.
        [TG3]: Fix TSO bugs.
        [MAC80211]: Add maintainers entry for mac80211.
        [MAC80211]: Add debugfs attributes.
        [MAC80211]: Add mac80211 wireless stack.
        [MAC80211]: Add generic include/linux/ieee80211.h
        [NETLINK]: Remove references to process ID
        [AF_IUCV]: Compile fix - adopt to skbuff changes.
      68762f3d
    • Linus Torvalds's avatar
      Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 · 4f7a307d
      Linus Torvalds authored
      * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (87 commits)
        [SCSI] fusion: fix domain validation loops
        [SCSI] qla2xxx: fix regression on sparc64
        [SCSI] modalias for scsi devices
        [SCSI] sg: cap reserved_size values at max_sectors
        [SCSI] BusLogic: stop using check_region
        [SCSI] tgt: fix rdma transfer bugs
        [SCSI] aacraid: fix aacraid not finding device
        [SCSI] aacraid: Correct SMC products in aacraid.txt
        [SCSI] scsi_error.c: Add EH Start Unit retry
        [SCSI] aacraid: [Fastboot] Panics for AACRAID driver during 'insmod' for kexec test.
        [SCSI] ipr: Driver version to 2.3.2
        [SCSI] ipr: Faster sg list fetch
        [SCSI] ipr: Return better qc_issue errors
        [SCSI] ipr: Disrupt device error
        [SCSI] ipr: Improve async error logging level control
        [SCSI] ipr: PCI unblock config access fix
        [SCSI] ipr: Fix for oops following SATA request sense
        [SCSI] ipr: Log error for SAS dual path switch
        [SCSI] ipr: Enable logging of debug error data for all devices
        [SCSI] ipr: Add new PCI-E IDs to device table
        ...
      4f7a307d
    • Linus Torvalds's avatar
      Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/voyager-2.6 · fabb5c4e
      Linus Torvalds authored
      * master.kernel.org:/pub/scm/linux/kernel/git/jejb/voyager-2.6:
        [VOYAGER] add smp alternatives
        [VOYAGER] Use modern techniques to setup and teardown low identiy mappings.
        [VOYAGER] Convert the monitor thread to use the kthread API
        [VOYAGER] clockevents driver: bring voyager in to line
        [VOYAGER] clockevents: correct boot cpu is zero assumption
        [VOYAGER] add smp_call_function_single
      fabb5c4e
    • Arnaud Patard's avatar
      [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro · d0fdb5a5
      Arnaud Patard authored
      
      
      The S3C2410_UDC_SETIX() macro is not used and won't be used by the udc
      driver, so delete it.
      Signed-off-by: default avatarArnaud Patard <arnaud.patard@rtp-net.org>
      Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      d0fdb5a5
    • Arnaud Patard's avatar
      [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header · c4b5bd4b
      Arnaud Patard authored
      
      
      linux/mmc/protocol.h header is gone, thus breaking the build of the
      mach-qt2410.c file. As this header is not used, I'm removing it. The
      right headers may still be added later if needed.
      Signed-off-by: default avatarArnaud Patard <arnaud.patard@rtp-net.org>
      Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      c4b5bd4b
    • Michael Chan's avatar
      [TG3]: Add TG3_FLAG_SUPPORT_MSI flag. · 7544b097
      Michael Chan authored
      
      
      And fix up the code to always allow MSI on 5714 A2.
      
      Call tg3_find_peer() earlier because we need that information before
      we can determine whether we can set TG3_FLAG_SUPPORT_MSI or not.
      Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7544b097
    • Fabrice Aeschbacher's avatar
      ide-cs: recognize 2GB CompactFlash from Transcend · aa12b284
      Fabrice Aeschbacher authored
      
      
      Without the following patch, the kernel does not automatically detect
      2GB CompactFlash cards from Transcend.
      Signed-off-by: default avatarFabrice Aeschbacher <fabrice.aeschbacher@siemens.com>
      Cc: Dominik Brodowski <linux@dominikbrodowski.net>
      Acked-by: default avatarPeter Stuge <peter@stuge.se>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      aa12b284
    • Sergei Shtylyov's avatar
      hpt366: don't check enablebits for HPT36x · fdb0d72b
      Sergei Shtylyov authored
      
      
      HPT36x chip don't seem to have the channel enable bits, so prevent the IDE core
      from checking them...
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Cc: Michal Kepien <michal.kepien@poczta.onet.pl>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      fdb0d72b
    • Bartlomiej Zolnierkiewicz's avatar
      ide-cris: fix ->speedproc and wrong ->swdma_mask · 55e4dee3
      Bartlomiej Zolnierkiewicz authored
      
      
      * fix ->speedproc to set the drive speed
      
      * this driver doesn't support SWDMA so use the correct ->swdma_mask
      
      * BUG() if an unsupported mode is passed to ->speedproc
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      55e4dee3
    • Bartlomiej Zolnierkiewicz's avatar
      siimage: fix wrong ->swdma_mask · 8e60d376
      Bartlomiej Zolnierkiewicz authored
      
      
      This driver doesn't support SWDMA so use the correct ->swdma_mask.
      
      While at it:
      
      * no need to call config_chipset_for_pio() in config_chipset_for_dma(),
        if DMA is not available config_chipset_for_pio() will be called
        by siimage_config_drive_for_dma() and if DMA is available
        config_siimage_chipset_for_pio() will be called by siimage_tune_chipset()
      
      * remove needless config_chipset_for_pio() wrapper
      
      * bump driver version
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      8e60d376
    • Bartlomiej Zolnierkiewicz's avatar
      it821x: PIO mode setup fixes · 0e9b4e53
      Bartlomiej Zolnierkiewicz authored
      
      
      * limit max PIO mode to PIO4, this driver doesn't support PIO5 and attempt
        to setup PIO5 by it821x_tuneproc() could result in incorrect PIO timings
        + incorrect base clock being set for controller in the passthrough mode
      
      * move code limiting max PIO according to the pair device capabilities from
        config_it821x_chipset_for_pio() to it821x_tuneproc() so the check is also
        applied for mode change requests coming through ->tuneproc and ->speedproc
        interfaces
      
      * set device speed in it821x_tuneproc()
      
      * in it821x_tune_chipset() call it821x_tuneproc() also if the controller is
        in the smart mode (so the check for pair device max PIO is done)
      
      * rename it821x_tuneproc() to it821x_tune_pio(), then add it821x_tuneproc()
        wrapper which does the max PIO mode check;  it worked by the pure luck
        previously, pio[4] and pio_want[4] arrays were used with index == 255
        so random PIO timings and base clock were set for the controller in the
        passthrough mode, thankfully PIO timings and base clock were corrected
        later by config_it821x_chipset_for_pio() call (but it was not called for
        PIO-only devices during resume and for user requested PIO autotuning)
      
      * remove config_it821x_chipset_for_pio() call from config_chipset_for_dma()
        as the driver sets ->autotune to 1 and ->tuneproc does the proper job now
      
      * convert the last user of config_it821x_chipset_for_pio() to use
        it821x_tuneproc(drive, 255) and remove no longer needed function
      
      While at it:
      
      * fix few comments
      
      * bump driver version
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      0e9b4e53
    • Bartlomiej Zolnierkiewicz's avatar
      pdc202xx_new: enable DMA for all ATAPI devices · 247b03f8
      Bartlomiej Zolnierkiewicz authored
      
      
      There is no reason to limit DMA to ide_cdrom type devices.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      247b03f8
    • Bartlomiej Zolnierkiewicz's avatar
      alim15x3: PIO fallback fix · 072cdcbb
      Bartlomiej Zolnierkiewicz authored
      
      
      If DMA tuning fails always set the best PIO mode.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      072cdcbb
    • Sergei Shtylyov's avatar
      aec62xx: fix PIO/DMA setup issues · 826a1b65
      Sergei Shtylyov authored
      
      
      Teach the driver's tuneproc() method to do PIO auto-runing properly since it
      treated 5 instead of 255 as auto-tune request, and also passed the mode limit
      of PIO5 to ide_get_best_pio_mode() despite supporting up to PIO4 only.
      
      While at it, also:
      
      - remove the driver's wrong claim about supporting SWDMA modes;
      
      - stop hooking ide_dma_timeout() method as the handler clearly doesn't fit for
        the task...
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      826a1b65
    • Sergei Shtylyov's avatar
      cmd64x: use interrupt status from MRDMODE register (take 2) · 66602c83
      Sergei Shtylyov authored
      
      
      Fold the parts of the ide_dma_end() methods identical to __ide_dma_end() into a
      mere call to it.
      Start using faster versions of the ide_dma_end() and ide_dma_test_irq() methods
      for the PCI0646U and newer chips that have the duplicate interrupt status bits
      in the I/O mapped MRDMODE register, determing what methods to use at the driver
      load time. Do some cleanup/renaming in the "old" ide_dma_test_irq() method too.
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      66602c83
    • Sergei Shtylyov's avatar
      cmd64x: procfs code fixes/cleanups (take 2) · 5826b318
      Sergei Shtylyov authored
      
      
      Fix several issues with the driver's procfs output:
      
      - when testing if channel is enabled, the code looks at the "simplex" bits, not
        at the real enable bits -- add #define for the primary channel enable bit;
      
      - UltraDMA modes 0, 1, 3 for slave drive reported incorrectly due to using the
        master drive's clock cycle resolution bit.
      
      While at it, also perform the following cleanups:
      
      - don't print extra newline before the first controller's dump;
      
      - correct the chipset names (from CMDxxx to PCI-xxx)
      
      - don't read from the registers which aren't used for dump;
      
      - better align the table column sizes;
      
      - rework UltraDMA mode dump code;
      
      - remove PIO mode dump code that has never been finished;
      
      - remove the duplicate interrupt status (the MRDMODE register bits mirror those
        those in the CFR and ARTTIM23 registers) and fold the dump into single line;
      
      - correct the style of the ?: operators...
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      5826b318
    • Sergei Shtylyov's avatar
      cmd64x: add/fix enablebits (take 2) · 7accbffd
      Sergei Shtylyov authored
      
      
      The IDE core looks at the wrong bit when checking if the secondary channel is
      enabled on PCI0646 -- CNTRL register bit 7 is read-ahead disable, bit 3 is the
      correct one.
      Starting with PCI0646U chip, the primary channel can also be enabled/disabled --
      so, add 'enablebits' initializers to each 'ide_pci_device_t' structure, handling
      the original PCI0646 via adding the init_setup() method and clearing the 'reg'
      field there if necessary...
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      7accbffd
    • Sergei Shtylyov's avatar
      cmd64x: interrupt status fixes (take 2) · e51e2528
      Sergei Shtylyov authored
      
      
      The driver's ide_dma_test_irq() method was reading the MRDMODE register even on
      PCI0643/6 where it was write-only -- fix this by always reading the "backward-
      compatible" interrupt bits, renaming dma_alt_stat to irq_stat as the interrupt
      status bits are not coupled to DMA.
      In addition, wrong interrupt bit was tested/cleared for the primary channel --
      it's bit 2 in all the chip specs and the driver used bit 1... :-/
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      e51e2528
    • Sergei Shtylyov's avatar
      cmd64x: fix multiword and remove single-word DMA support · 60e7a82f
      Sergei Shtylyov authored
      
      
      Fix the multiword DMA and drop the single-word DMA support (which nobody will
      miss, I think).  In order to do it, a number of changes was necessary:
      
      - rename program_drive_counts() to program_cycle_times(), pass to it cycle's
        total/active times instead of the clock counts, and convert them into the
        active/recovery clocks there instead of cmd64x_tune_pio() -- this causes
        quantize_timing() to also move;
      
      - contrarywise, move all the code handling the address setup timing into
        cmd64x_tune_pio(), so that setting MWDMA mode wouldn't change address setup;
      
      - remove from the speedproc() method the  bogus code pretending to set the DMA
        timings by twiddling bits in the BMIDE status register, handle setting MWDMA
        by just calling program_cycle_times(); while at it, improve the style of that
        whole switch statement;
      
      - stop fiddling with the DMA capable bits in the speedproc() method -- they do
        not enable DMA, and are properly dealt with by the dma_host_{on,off} methods;
      
      - don't set hwif->swdma_mask in the init_hwif() method anymore.
      
      In addition to those changes, do the following:
      
      - in cmd64x_tune_pio(), when writing to ARTTIM23 register preserve the interrupt
        status bit, eliminate local_irq_{save|restore}() around this code as there's
        *no* actual race with the interrupt handler, and move cmdprintk() to a more
        fitting place -- after ide_get_best_pio_mode() call;
      
      - make {arttim|drwtim}_regs arrays single-dimensional, indexed with drive->dn;
      
      - rename {setup|recovery}_counts[] into more fitting {setup|recovery}_values[];
      
      - in  the speedproc() method, get rid of the duplicate reads/writes from/to the
        UDIDETCRx registers and of the extra variable used to store the transfer mode
        value after filtering,  use another method of determining master/slave drive,
        and cleanup useless parens;
      
      - beautify cmdprintk() output here and there.
      
      While at it, remove meaningless comment about the driver being used only on
      UltraSPARC and long non-relevant RCS tag. :-)
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      60e7a82f
    • Sergei Shtylyov's avatar
      sl82c105: DMA support code cleanup (take 4) · 688a87d1
      Sergei Shtylyov authored
      
      
      Fold the now equivalent code in the ide_dma_check() method into a mere call to
      ide_use_dma().  Make config_for_dma() return non-zero if DMA mode has been set
      and call it from the ide_dma_check() method instead of ide_dma_on().
      Defer writing the DMA timings to the chip registers until DMA is really turned
      on (and do not enable IORDY for DMA).
      Remove unneeded code from the init_hwif() method, improve its overall looks.
      Rename the dma_start(), ide_dma_check(), and ide_dma_lostirq() methods, and
      also use more proper hwif->dma_command, fix printk() and comment in the latter
      one as well.  While at it, cleanup style in several places.
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      688a87d1
    • Sergei Shtylyov's avatar
      sl82c105: rework PIO support (take 2) · e93df705
      Sergei Shtylyov authored
      
      
      Get rid of the 'pio_speed' member of 'ide_drive_t' that was only used by this
      driver by storing the PIO mode timings in the 'drive_data' instead -- this
      allows us to greatly  simplify the process of "reloading" of the chip's timing
      register and do it right in sl82c150_dma_off_quietly() and to get rid of two
      extra arguments to config_for_pio() -- which got renamed to sl82c105_tune_pio()
      and now returns a PIO mode selected, with ide_config_drive_speed() call moved
      into the tuneproc() method, now called sl82c105_tune_drive() with the code to
      set drive's 'io_32bit' and 'unmask' flags in its turn moved to its proper place
      in the init_hwif() method.
      Also, while at it, rename get_timing_sl82c105() into get_pio_timings() and get
      rid of the code in it clamping cycle counts to 32 which was both incorrect and
      never executed anyway...
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      e93df705
    • Russell King's avatar
      [ARM] mm 10: allow memory type to be specified with ioremap · 3603ab2b
      Russell King authored
      
      
      __ioremap() took a set of page table flags (specifically the cacheable
      and bufferable bits) to control the mapping type.  However, with
      the advent of ARMv6, this is far too limited.
      
      Replace the page table flags with a memory type index, so that the
      desired attributes can be selected from the mem_type table.
      
      Finally, to prevent silent miscompilation due to the differing
      arguments, rename the __ioremap() and __ioremap_pfn() functions.
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      3603ab2b
    • Matt Carlson's avatar
      [TG3]: Eliminate the TG3_FLAG_5701_REG_WRITE_BUG flag. · 98efd8a6
      Matt Carlson authored
      
      
      This patch removes the use of the TG3_FLAG_5701_REG_WRITE_BUG flag.
      It's logic is only used to set a function pointer and thus the
      logic can be collapsed and the flag removed.
      
      [ Comment tidy by Christoph Hellwig. -DaveM ]
      Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
      Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
      98efd8a6
    • Russell King's avatar
      [ARM] mm 9: add additional device memory types · 0af92bef
      Russell King authored
      
      
      Add cached device type for ioremap_cached().  Group all device memory
      types together, and ensure that they all have a "MT_DEVICE" prefix.
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      0af92bef
    • Michael Chan's avatar
      [TG3]: Eliminate the TG3_FLAG_GOT_SERDES_FLOWCTL flag. · 5cf64b8a
      Michael Chan authored
      
      
      This flag does not do anything useful.
      Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5cf64b8a