Commit 246baac2 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'usb-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 4.12-rc5

  They are for some reported issues in the chipidea and gadget drivers.
  Nothing major. All have been in linux-next for a while with no
  reported issues"

* tag 'usb-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc: renesas_usb3: Fix PN_INT_ENA disabling timing
  usb: gadget: udc: renesas_usb3: lock for PN_ registers access
  usb: gadget: udc: renesas_usb3: fix deadlock by spinlock
  usb: gadget: udc: renesas_usb3: fix pm_runtime functions calling
  usb: gadget: f_mass_storage: Serialize wake and sleep execution
  usb: dwc2: add support for the DWC2 controller on Meson8 SoCs
  phy: qualcomm: phy-qcom-qmp: fix application of sizeof to pointer
  usb: musb: dsps: keep VBUS on for host-only mode
  usb: chipidea: core: check before accessing ci_role in ci_role_show
  usb: chipidea: debug: check before accessing ci_role
  phy: qcom-qmp: fix return value check in qcom_qmp_phy_create()
  usb: chipidea: udc: fix NULL pointer dereference if udc_start failed
  usb: chipidea: imx: Do not access CLKONOFF on i.MX51
parents ef918d3c 29532e7b
......@@ -10,6 +10,7 @@ Required properties:
- "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
- "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
- "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
- "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
- "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
- "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
- "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
......
......@@ -844,7 +844,7 @@ static int qcom_qmp_phy_vreg_init(struct device *dev)
int num = qmp->cfg->num_vregs;
int i;
qmp->vregs = devm_kcalloc(dev, num, sizeof(qmp->vregs), GFP_KERNEL);
qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
if (!qmp->vregs)
return -ENOMEM;
......@@ -983,16 +983,16 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
*/
qphy->tx = of_iomap(np, 0);
if (IS_ERR(qphy->tx))
return PTR_ERR(qphy->tx);
if (!qphy->tx)
return -ENOMEM;
qphy->rx = of_iomap(np, 1);
if (IS_ERR(qphy->rx))
return PTR_ERR(qphy->rx);
if (!qphy->rx)
return -ENOMEM;
qphy->pcs = of_iomap(np, 2);
if (IS_ERR(qphy->pcs))
return PTR_ERR(qphy->pcs);
if (!qphy->pcs)
return -ENOMEM;
/*
* Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
......
......@@ -843,7 +843,10 @@ static ssize_t ci_role_show(struct device *dev, struct device_attribute *attr,
{
struct ci_hdrc *ci = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", ci_role(ci)->name);
if (ci->role != CI_ROLE_END)
return sprintf(buf, "%s\n", ci_role(ci)->name);
return 0;
}
static ssize_t ci_role_store(struct device *dev,
......
......@@ -294,7 +294,8 @@ static int ci_role_show(struct seq_file *s, void *data)
{
struct ci_hdrc *ci = s->private;
seq_printf(s, "%s\n", ci_role(ci)->name);
if (ci->role != CI_ROLE_END)
seq_printf(s, "%s\n", ci_role(ci)->name);
return 0;
}
......
......@@ -1993,6 +1993,7 @@ static void udc_id_switch_for_host(struct ci_hdrc *ci)
int ci_hdrc_gadget_init(struct ci_hdrc *ci)
{
struct ci_role_driver *rdrv;
int ret;
if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
return -ENXIO;
......@@ -2005,7 +2006,10 @@ int ci_hdrc_gadget_init(struct ci_hdrc *ci)
rdrv->stop = udc_id_switch_for_host;
rdrv->irq = udc_irq;
rdrv->name = "gadget";
ci->roles[CI_ROLE_GADGET] = rdrv;
return udc_start(ci);
ret = udc_start(ci);
if (!ret)
ci->roles[CI_ROLE_GADGET] = rdrv;
return ret;
}
......@@ -108,6 +108,8 @@ struct imx_usbmisc {
const struct usbmisc_ops *ops;
};
static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data);
static int usbmisc_imx25_init(struct imx_usbmisc_data *data)
{
struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
......@@ -242,10 +244,15 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
| MX53_USB_UHx_CTRL_ULPI_INT_EN;
writel(val, reg);
/* Disable internal 60Mhz clock */
reg = usbmisc->base + MX53_USB_CLKONOFF_CTRL_OFFSET;
val = readl(reg) | MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF;
writel(val, reg);
if (is_imx53_usbmisc(data)) {
/* Disable internal 60Mhz clock */
reg = usbmisc->base +
MX53_USB_CLKONOFF_CTRL_OFFSET;
val = readl(reg) |
MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF;
writel(val, reg);
}
}
if (data->disable_oc) {
reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
......@@ -267,10 +274,15 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
| MX53_USB_UHx_CTRL_ULPI_INT_EN;
writel(val, reg);
/* Disable internal 60Mhz clock */
reg = usbmisc->base + MX53_USB_CLKONOFF_CTRL_OFFSET;
val = readl(reg) | MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF;
writel(val, reg);
if (is_imx53_usbmisc(data)) {
/* Disable internal 60Mhz clock */
reg = usbmisc->base +
MX53_USB_CLKONOFF_CTRL_OFFSET;
val = readl(reg) |
MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF;
writel(val, reg);
}
}
if (data->disable_oc) {
reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
......@@ -456,6 +468,10 @@ static const struct usbmisc_ops imx27_usbmisc_ops = {
.init = usbmisc_imx27_init,
};
static const struct usbmisc_ops imx51_usbmisc_ops = {
.init = usbmisc_imx53_init,
};
static const struct usbmisc_ops imx53_usbmisc_ops = {
.init = usbmisc_imx53_init,
};
......@@ -479,6 +495,13 @@ static const struct usbmisc_ops imx7d_usbmisc_ops = {
.set_wakeup = usbmisc_imx7d_set_wakeup,
};
static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data)
{
struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
return usbmisc->ops == &imx53_usbmisc_ops;
}
int imx_usbmisc_init(struct imx_usbmisc_data *data)
{
struct imx_usbmisc *usbmisc;
......@@ -536,7 +559,7 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
},
{
.compatible = "fsl,imx51-usbmisc",
.data = &imx53_usbmisc_ops,
.data = &imx51_usbmisc_ops,
},
{
.compatible = "fsl,imx53-usbmisc",
......
......@@ -144,6 +144,8 @@ const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params },
{ .compatible = "snps,dwc2" },
{ .compatible = "samsung,s3c6400-hsotg" },
{ .compatible = "amlogic,meson8-usb",
.data = dwc2_set_amlogic_params },
{ .compatible = "amlogic,meson8b-usb",
.data = dwc2_set_amlogic_params },
{ .compatible = "amlogic,meson-gxbb-usb",
......
......@@ -396,7 +396,11 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
/* Caller must hold fsg->lock */
static void wakeup_thread(struct fsg_common *common)
{
smp_wmb(); /* ensure the write of bh->state is complete */
/*
* Ensure the reading of thread_wakeup_needed
* and the writing of bh->state are completed
*/
smp_mb();
/* Tell the main thread that something has happened */
common->thread_wakeup_needed = 1;
if (common->thread_task)
......@@ -627,7 +631,12 @@ static int sleep_thread(struct fsg_common *common, bool can_freeze)
}
__set_current_state(TASK_RUNNING);
common->thread_wakeup_needed = 0;
smp_rmb(); /* ensure the latest bh->state is visible */
/*
* Ensure the writing of thread_wakeup_needed
* and the reading of bh->state are completed
*/
smp_mb();
return rc;
}
......
......@@ -623,7 +623,6 @@ static void renesas_usb3_stop_controller(struct renesas_usb3 *usb3)
{
usb3_disconnect(usb3);
usb3_write(usb3, 0, USB3_P0_INT_ENA);
usb3_write(usb3, 0, USB3_PN_INT_ENA);
usb3_write(usb3, 0, USB3_USB_OTG_INT_ENA);
usb3_write(usb3, 0, USB3_USB_INT_ENA_1);
usb3_write(usb3, 0, USB3_USB_INT_ENA_2);
......@@ -1475,7 +1474,13 @@ static void usb3_request_done_pipen(struct renesas_usb3 *usb3,
struct renesas_usb3_request *usb3_req,
int status)
{
usb3_pn_stop(usb3);
unsigned long flags;
spin_lock_irqsave(&usb3->lock, flags);
if (usb3_pn_change(usb3, usb3_ep->num))
usb3_pn_stop(usb3);
spin_unlock_irqrestore(&usb3->lock, flags);
usb3_disable_pipe_irq(usb3, usb3_ep->num);
usb3_request_done(usb3_ep, usb3_req, status);
......@@ -1504,30 +1509,46 @@ static void usb3_irq_epc_pipen_bfrdy(struct renesas_usb3 *usb3, int num)
{
struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, num);
struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep);
bool done = false;
if (!usb3_req)
return;
spin_lock(&usb3->lock);
if (usb3_pn_change(usb3, num))
goto out;
if (usb3_ep->dir_in) {
/* Do not stop the IN pipe here to detect LSTTR interrupt */
if (!usb3_write_pipe(usb3_ep, usb3_req, USB3_PN_WRITE))
usb3_clear_bit(usb3, PN_INT_BFRDY, USB3_PN_INT_ENA);
} else {
if (!usb3_read_pipe(usb3_ep, usb3_req, USB3_PN_READ))
usb3_request_done_pipen(usb3, usb3_ep, usb3_req, 0);
done = true;
}
out:
/* need to unlock because usb3_request_done_pipen() locks it */
spin_unlock(&usb3->lock);
if (done)
usb3_request_done_pipen(usb3, usb3_ep, usb3_req, 0);
}
static void usb3_irq_epc_pipen(struct renesas_usb3 *usb3, int num)
{
u32 pn_int_sta;
if (usb3_pn_change(usb3, num) < 0)
spin_lock(&usb3->lock);
if (usb3_pn_change(usb3, num) < 0) {
spin_unlock(&usb3->lock);
return;
}
pn_int_sta = usb3_read(usb3, USB3_PN_INT_STA);
pn_int_sta &= usb3_read(usb3, USB3_PN_INT_ENA);
usb3_write(usb3, pn_int_sta, USB3_PN_INT_STA);
spin_unlock(&usb3->lock);
if (pn_int_sta & PN_INT_LSTTR)
usb3_irq_epc_pipen_lsttr(usb3, num);
if (pn_int_sta & PN_INT_BFRDY)
......@@ -1660,6 +1681,7 @@ static int usb3_disable_pipe_n(struct renesas_usb3_ep *usb3_ep)
spin_lock_irqsave(&usb3->lock, flags);
if (!usb3_pn_change(usb3, usb3_ep->num)) {
usb3_write(usb3, 0, USB3_PN_INT_ENA);
usb3_write(usb3, 0, USB3_PN_RAMMAP);
usb3_clear_bit(usb3, PN_CON_EN, USB3_PN_CON);
}
......@@ -1799,6 +1821,9 @@ static int renesas_usb3_start(struct usb_gadget *gadget,
/* hook up the driver */
usb3->driver = driver;
pm_runtime_enable(usb3_to_dev(usb3));
pm_runtime_get_sync(usb3_to_dev(usb3));
renesas_usb3_init_controller(usb3);
return 0;
......@@ -1807,14 +1832,14 @@ static int renesas_usb3_start(struct usb_gadget *gadget,
static int renesas_usb3_stop(struct usb_gadget *gadget)
{
struct renesas_usb3 *usb3 = gadget_to_renesas_usb3(gadget);
unsigned long flags;
spin_lock_irqsave(&usb3->lock, flags);
usb3->softconnect = false;
usb3->gadget.speed = USB_SPEED_UNKNOWN;
usb3->driver = NULL;
renesas_usb3_stop_controller(usb3);
spin_unlock_irqrestore(&usb3->lock, flags);
pm_runtime_put(usb3_to_dev(usb3));
pm_runtime_disable(usb3_to_dev(usb3));
return 0;
}
......@@ -1891,9 +1916,6 @@ static int renesas_usb3_remove(struct platform_device *pdev)
device_remove_file(&pdev->dev, &dev_attr_role);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
usb_del_gadget_udc(&usb3->gadget);
__renesas_usb3_ep_free_request(usb3->ep0_req);
......@@ -2099,9 +2121,6 @@ static int renesas_usb3_probe(struct platform_device *pdev)
usb3->workaround_for_vbus = priv->workaround_for_vbus;
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
dev_info(&pdev->dev, "probed\n");
return 0;
......
......@@ -245,6 +245,11 @@ static int dsps_check_status(struct musb *musb, void *unused)
dsps_mod_timer_optional(glue);
break;
case OTG_STATE_A_WAIT_BCON:
/* keep VBUS on for host-only mode */
if (musb->port_mode == MUSB_PORT_MODE_HOST) {
dsps_mod_timer_optional(glue);
break;
}
musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
skip_session = 1;
/* fall */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment