Skip to content
Snippets Groups Projects
Commit 9c1db8a5 authored by Jacob Chen's avatar Jacob Chen Committed by Helen Koike
Browse files

dt-bindings: Document the Rockchip ISP1 bindings


Add DT bindings documentation for Rockchip ISP1

Signed-off-by: default avatarJacob Chen <jacob2.chen@rock-chips.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
[update for upstream]
Signed-off-by: default avatarHelen Koike <helen.koike@collabora.com>

Series-changes: 7
- update document with new design and tested example
parent 51d9a916
No related branches found
No related tags found
No related merge requests found
Rockchip SoC Image Signal Processing unit v1
----------------------------------------------
Rockchip ISP1 is the Camera interface for the Rockchip series of SoCs
which contains image processing, scaling, and compression funcitons.
Required properties:
- compatible: value should be one of the following
"rockchip,rk3288-cif-isp";
"rockchip,rk3399-cif-isp";
- reg : offset and length of the register set for the device.
- interrupts: should contain ISP interrupt.
- clocks: phandle to the required clocks.
- clock-names: required clock name.
- iommus: required a iommu node.
- phys: the phandle for the PHY port
- phy-names: must contain "dphy"
port node
-------------------
The device node should contain one 'ports' child node, with children 'port'
with child 'endpoint'.
nodes, according to the bindings defined in Documentation/devicetree/bindings/
media/video-interfaces.txt.
- endpoint(mipi):
- remote-endpoint: Connecting to Rockchip MIPI-DPHY,
which is defined in rockchip-mipi-dphy.txt.
The port node must contain at least one endpoint, either parallel or mipi.
It could have multiple endpoints, but please note the hardware don't support
two sensors work at a time, they are supposed to work asynchronously.
Device node example
-------------------
isp0: isp0@ff910000 {
compatible = "rockchip,rk3399-cif-isp";
reg = <0x0 0xff910000 0x0 0x4000>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru SCLK_ISP0>,
<&cru ACLK_ISP0>, <&cru ACLK_ISP0_WRAPPER>,
<&cru HCLK_ISP0>, <&cru HCLK_ISP0_WRAPPER>;
clock-names = "clk_isp",
"aclk_isp", "aclk_isp_wrap",
"hclk_isp", "hclk_isp_wrap";
power-domains = <&power RK3399_PD_ISP0>;
iommus = <&isp0_mmu>;
phys = <&dphy>;
phy-names = "dphy";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
mipi_in_wcam: endpoint@0 {
reg = <0>;
remote-endpoint = <&wcam_out>;
data-lanes = <1 2>;
};
mipi_in_ucam: endpoint@1 {
reg = <1>;
remote-endpoint = <&ucam_out>;
data-lanes = <1>;
};
};
};
};
0% Loading or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment