diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
index 4b641c7bf1c252a3465aa7e028e18042cb7ad61b..09089a6d69ed8d1c9b29115e6abce75a6d1a2fcd 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
@@ -32,8 +32,8 @@ Example:
touchscreen-fuzz-x = <4>;
touchscreen-fuzz-y = <7>;
touchscreen-fuzz-pressure = <2>;
- touchscreen-max-x = <4096>;
- touchscreen-max-y = <4096>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
touchscreen-max-pressure = <2048>;
ti,x-plate-ohms = <280>;
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index c3255e0c90aa829fc792f02d1265d413f3c6e624..dbb3f4d2bf84ebf4565555949053c94619ea161d 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -223,6 +223,25 @@
/include/ "tps65217.dtsi"
&tps {
+ /*
+ * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+ * mode") at poweroff. Most BeagleBone versions do not support RTC-only
+ * mode and risk hardware damage if this mode is entered.
+ *
+ * For details, see linux-omap mailing list May 2015 thread
+ * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+ * In particular, messages:
+ * http://www.spinics.net/lists/linux-omap/msg118585.html
+ * http://www.spinics.net/lists/linux-omap/msg118615.html
+ *
+ * You can override this later with
+ * &tps { /delete-property/ ti,pmic-shutdown-controller; }
+ * if you want to use RTC-only mode and made sure you are not affected
+ * by the hardware problems. (Tip: double-check by performing a current
+ * measurement after shutdown: it should be less than 1 mA.)
+ */
+ ti,pmic-shutdown-controller;
+
regulators {
dcdc1_reg: regulator@0 {
regulator-name = "vdds_dpr";
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
index 518b8fde88b0c87005fe68e413cfee769befac07..18cc826e9db534714a1b4d8a3cfc497e43ffcc85 100644
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -12,7 +12,7 @@
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <1>;
};
@@ -20,7 +20,7 @@
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&rmii_ck>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <9>;
};
@@ -28,7 +28,7 @@
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <2>;
};
@@ -36,7 +36,7 @@
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&pclk_ck>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <10>;
};
@@ -44,7 +44,7 @@
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <0>;
};
@@ -52,7 +52,7 @@
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sys_ck>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <8>;
};
@@ -60,7 +60,7 @@
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&sys_ck>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <3>;
};
};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index de8427be830a32e24a01ace97f11303435528b7b..289806adb343806aefce22e63b6caa1d558741fb 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -382,7 +382,7 @@
ti,hwmods = "usb_otg_hs";
usb0: usb@47401000 {
- compatible = "ti,musb-am33xx";
+ compatible = "ti,musb-dm816";
reg = <0x47401400 0x400
0x47401000 0x200>;
reg-names = "mc", "control";
@@ -422,7 +422,7 @@
};
usb1: usb@47401800 {
- compatible = "ti,musb-am33xx";
+ compatible = "ti,musb-dm816";
reg = <0x47401c00 0x400
0x47401800 0x200>;
reg-names = "mc", "control";
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 5c16145920eafd9604f0571dfe60a23986313871..5f5e0f3d5b64fcb2283f72b9df923c793be7f75c 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -832,8 +832,8 @@
touchscreen-fuzz-x = <4>;
touchscreen-fuzz-y = <7>;
touchscreen-fuzz-pressure = <2>;
- touchscreen-max-x = <4096>;
- touchscreen-max-y = <4096>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
touchscreen-max-pressure = <2048>;
ti,x-plate-ohms = <280>;
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index d1dedc8195ed2569508e0d522301bdf535aefda8..eafd120b53f1bc15c82f2cc47dc8033e31ca566e 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -203,23 +203,8 @@ save_context_wfi:
*/
ldr r1, kernel_flush
blx r1
- /*
- * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
- * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
- * This sequence switches back to ARM. Note that .align may insert a
- * nop: bx pc needs to be word-aligned in order to work.
- */
- THUMB( .thumb )
- THUMB( .align )
- THUMB( bx pc )
- THUMB( nop )
- .arm
-
b omap3_do_wfi
-
-/*
- * Local variables
- */
+ENDPROC(omap34xx_cpu_suspend)
omap3_do_wfi_sram_addr:
.word omap3_do_wfi_sram
kernel_flush:
@@ -364,10 +349,7 @@ exit_nonoff_modes:
* ===================================
*/
ldmfd sp!, {r4 - r11, pc} @ restore regs and return
-
-/*
- * Local variables
- */
+ENDPROC(omap3_do_wfi)
sdrc_power:
.word SDRC_POWER_V
cm_idlest1_core: