Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Device-tree updates from Olof Johansson:
 "New SoCs:

   - Atmel/Microchip SAM9X60 (ARM926 SoC)

   - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all
     variants of it with different GPU/media IP configurations.

   - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU)

   - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of
     db8500)

   - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem)

   - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class)

  New boards:

   - Allwinner:
      + Emlid Neutis SoM (H3 variant)
      + Libre Computer ALL-H3-IT
      + PineH64 Model B

   - Amlogic:
      + Libretech Amlogic GX PC (s905d and s912-based variants)

   - Atmel/Microchip:
      + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1)

   - Marvell:
      + Armada 385-based SolidRun Clearfog GTR

   - NXP:
      + Gateworks GW59xx boards based on i.MX6/6Q/6QDL
      + Tolino Shine 3 eBook reader (i.MX6sl)
      + Embedded Artists COM (i.MX7ULP)
      + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems)
      + Google Coral Edge TPU (i.MX8MQ)

   - Rockchip:
      + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs)
      + Radxa Rock Pi N10 (RK3399Pro-based)
      + VMARC RK3399Pro SOM

   - ST:
      + Reference boards for stm32mp15

   - ST Ericsson:
      + Samsung Galaxy S III mini (GT-I8190)
      + HREF520 reference board for DB8520

   - TI OMAP:
      + Gen1 Amazon Echo (OMAP3630-based)

   - Qualcomm:
      + Inforce 6640 Single Board Computer (msm8996-based)
      + SC7180 IDP (SC7180-based)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits)
  dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml
  arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera
  arm64: dts: ti: k3-am65-main Add CAL node
  arm64: dts: ti: k3-j721e-main: Add McASP nodes
  arm64: dts: ti: k3-am654-main: Add McASP nodes
  arm64: dts: ti: k3-j721e: DMA support
  arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss
  arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation
  arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS
  arm64: dts: ti: k3-am65: DMA support
  arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss
  arm64: dts: ti: k3-am65-main: Correct main NAVSS representation
  ARM: dts: aspeed: rainier: Add UCD90320 power sequencer
  ARM: dts: aspeed: rainier: Switch PSUs to unknown version
  arm64: dts: rockchip: Kill off "simple-panel" compatibles
  ARM: dts: rockchip: Kill off "simple-panel" compatibles
  arm64: dts: rockchip: rename dwmmc node names to mmc
  ARM: dts: rockchip: rename dwmmc node names to mmc
  arm64: dts: exynos: Rename Samsung and Exynos to lowercase
  arm64: dts: uniphier: add reset-names to NAND controller node
  ...

Documentation/devicetree/bindings/arm/amlogic.yaml

@@ -59,6 +59,7 @@ properties:
               - friendlyarm,nanopi-k2
               - hardkernel,odroid-c2
               - nexbox,a95x
+              - videostrong,kii-pro
               - wetek,hub
               - wetek,play2
           - const: amlogic,meson-gxbb
@@ -104,6 +105,7 @@ properties:
           - enum:
               - amlogic,p230
               - amlogic,p231
+              - libretech,aml-s905d-pc
               - phicomm,n1
           - const: amlogic,s905d
           - const: amlogic,meson-gxl
@@ -115,6 +117,7 @@ properties:
               - amlogic,q201
               - khadas,vim2
               - kingnovel,r-box-pro
+              - libretech,aml-s912-pc
               - nexbox,a1
               - tronsmart,vega-s96
           - const: amlogic,s912

Documentation/devicetree/bindings/arm/atmel-at91.yaml

@@ -35,6 +35,16 @@ properties:
               - atmel,at91sam9x60
           - const: atmel,at91sam9
 
+      - items:
+          - enum:
+              - overkiz,kizboxmini-base # Overkiz kizbox Mini Base Board
+              - overkiz,kizboxmini-mb   # Overkiz kizbox Mini Mother Board
+              - overkiz,kizboxmini-rd   # Overkiz kizbox Mini RailDIN
+              - overkiz,smartkiz        # Overkiz SmartKiz Board
+          - const: atmel,at91sam9g25
+          - const: atmel,at91sam9x5
+          - const: atmel,at91sam9
+
       - items:
           - enum:
               - atmel,at91sam9g15
@@ -52,11 +62,32 @@ properties:
           - const: atmel,sama5d2
           - const: atmel,sama5
 
+      - description: Microchip SAMA5D27 WLSOM1
+        items:
+          - const: microchip,sama5d27-wlsom1
+          - const: atmel,sama5d27
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
+      - description: Microchip SAMA5D27 WLSOM1 Evaluation Kit
+        items:
+          - const: microchip,sama5d27-wlsom1-ek
+          - const: microchip,sama5d27-wlsom1
+          - const: atmel,sama5d27
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
       - items:
           - const: atmel,sama5d27
           - const: atmel,sama5d2
           - const: atmel,sama5
 
+      - description: SAM9X60-EK board
+        items:
+          - const: microchip,sam9x60ek
+          - const: microchip,sam9x60
+          - const: atmel,at91sam9
+
       - description: Nattis v2 board with Natte v2 power board
         items:
           - const: axentia,nattis-2

Documentation/devicetree/bindings/arm/atmel-sysregs.txt

@@ -45,6 +45,7 @@ RAMC SDRAM/DDR Controller required properties:
 			"atmel,at91sam9260-sdramc",
 			"atmel,at91sam9g45-ddramc",
 			"atmel,sama5d3-ddramc",
+			"microchip,sam9x60-ddramc"
 - reg: Should contain registers location and length
 
 Examples:

Documentation/devicetree/bindings/arm/fsl.yaml

@@ -128,6 +128,27 @@ properties:
               - variscite,dt6customboard
           - const: fsl,imx6q
 
+      - description: i.MX6Q Gateworks Ventana Boards
+        items:
+          - enum:
+              - gw,imx6q-gw51xx
+              - gw,imx6q-gw52xx
+              - gw,imx6q-gw53xx
+              - gw,imx6q-gw5400-a
+              - gw,imx6q-gw54xx
+              - gw,imx6q-gw551x
+              - gw,imx6q-gw552x
+              - gw,imx6q-gw553x
+              - gw,imx6q-gw560x
+              - gw,imx6q-gw5903
+              - gw,imx6q-gw5904
+              - gw,imx6q-gw5907
+              - gw,imx6q-gw5910
+              - gw,imx6q-gw5912
+              - gw,imx6q-gw5913
+          - const: gw,ventana
+          - const: fsl,imx6q
+
       - description: i.MX6QP based Boards
         items:
           - enum:
@@ -154,10 +175,31 @@ properties:
               - ysoft,imx6dl-yapp4-ursa   # i.MX6 Solo Y Soft IOTA Ursa board
           - const: fsl,imx6dl
 
+      - description: i.MX6DL Gateworks Ventana Boards
+        items:
+          - enum:
+              - gw,imx6dl-gw51xx
+              - gw,imx6dl-gw52xx
+              - gw,imx6dl-gw53xx
+              - gw,imx6dl-gw54xx
+              - gw,imx6dl-gw551x
+              - gw,imx6dl-gw552x
+              - gw,imx6dl-gw553x
+              - gw,imx6dl-gw560x
+              - gw,imx6dl-gw5903
+              - gw,imx6dl-gw5904
+              - gw,imx6dl-gw5907
+              - gw,imx6dl-gw5910
+              - gw,imx6dl-gw5912
+              - gw,imx6dl-gw5913
+          - const: gw,ventana
+          - const: fsl,imx6dl
+
       - description: i.MX6SL based Boards
         items:
           - enum:
               - fsl,imx6sl-evk            # i.MX6 SoloLite EVK Board
+              - kobo,tolino-shine3
           - const: fsl,imx6sl
 
       - description: i.MX6SLL based Boards
@@ -172,6 +214,7 @@ properties:
           - enum:
               - fsl,imx6sx-sabreauto      # i.MX6 SoloX Sabre Auto Board
               - fsl,imx6sx-sdb            # i.MX6 SoloX SDB Board
+              - fsl,imx6sx-sdb-reva       # i.MX6 SoloX SDB Rev-A Board
           - const: fsl,imx6sx
 
       - description: i.MX6UL based Boards
@@ -239,6 +282,7 @@ properties:
         items:
           - enum:
               - fsl,imx7d-sdb             # i.MX7 SabreSD Board
+              - fsl,imx7d-sdb-reva        # i.MX7 SabreSD Rev-A Board
               - novtech,imx7d-meerkat96   # i.MX7 Meerkat96 Board
               - toradex,colibri-imx7d                   # Colibri iMX7 Dual Module
               - toradex,colibri-imx7d-emmc              # Colibri iMX7 Dual 1GB (eMMC) Module
@@ -263,6 +307,7 @@ properties:
       - description: i.MX7ULP based Boards
         items:
           - enum:
+              - ea,imx7ulp-com           # i.MX7ULP Embedded Artists COM Board
               - fsl,imx7ulp-evk           # i.MX7ULP Evaluation Kit
           - const: fsl,imx7ulp
 
@@ -283,7 +328,9 @@ properties:
         items:
           - enum:
               - boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board
+              - einfochips,imx8mq-thor96  # i.MX8MQ Thor96 Board
               - fsl,imx8mq-evk            # i.MX8MQ EVK Board
+              - google,imx8mq-phanbell    # Google Coral Edge TPU
               - purism,librem5-devkit     # Purism Librem5 devkit
               - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
               - technexion,pico-pi-imx8m  # TechNexion PICO-PI-8M evk
@@ -385,6 +432,13 @@ properties:
               - fsl,ls2088a-rdb
           - const: fsl,ls2088a
 
+      - description: LX2160A based Boards
+        items:
+          - enum:
+              - fsl,lx2160a-qds
+              - fsl,lx2160a-rdb
+          - const: fsl,lx2160a
+
       - description: S32V234 based Boards
         items:
           - enum:

Documentation/devicetree/bindings/arm/qcom.yaml

@@ -24,28 +24,30 @@ description: |
 
   The 'SoC' element must be one of the following strings:
 
-  	apq8016
-  	apq8074
-  	apq8084
-  	apq8096
-  	msm8916
-  	msm8974
-  	msm8992
-  	msm8994
-  	msm8996
-  	mdm9615
-  	ipq8074
-  	sdm845
+        apq8016
+        apq8074
+        apq8084
+        apq8096
+        ipq8074
+        mdm9615
+        msm8916
+        msm8974
+        msm8992
+        msm8994
+        msm8996
+        sc7180
+        sdm845
 
   The 'board' element must be one of the following strings:
 
-  	cdp
-  	liquid
-  	dragonboard
-  	mtp
-  	sbc
-  	hk01
-  	qrd
+        cdp
+        dragonboard
+        hk01
+        idp
+        liquid
+        mtp
+        qrd
+        sbc
 
   The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
   where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
@@ -144,4 +146,8 @@ properties:
               - qcom,ipq8074-hk01
           - const: qcom,ipq8074
 
+      - items:
+          - enum:
+              - qcom,sc7180-idp
+          - const: qcom,sc7180
 ...

Documentation/devicetree/bindings/arm/rockchip.yaml

@@ -409,6 +409,9 @@ properties:
 
       - description: Pine64 RockPro64
         items:
+          - enum:
+              - pine64,rockpro64-v2.1
+              - pine64,rockpro64-v2.0
           - const: pine64,rockpro64
           - const: rockchip,rk3399
 
@@ -422,6 +425,12 @@ properties:
           - const: radxa,rockpi4
           - const: rockchip,rk3399
 
+      - description: Radxa ROCK Pi N10
+        items:
+          - const: radxa,rockpi-n10
+          - const: vamrs,rk3399pro-vmarc-som
+          - const: rockchip,rk3399pro
+
       - description: Radxa Rock2 Square
         items:
           - const: radxa,rock2-square

Documentation/devicetree/bindings/arm/sprd.yaml → Documentation/devicetree/bindings/arm/sprd/sprd.yaml

@@ -2,7 +2,7 @@
 # Copyright 2019 Unisoc Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/sprd.yaml#
+$id: http://devicetree.org/schemas/arm/sprd/sprd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Unisoc platforms device tree bindings

Documentation/devicetree/bindings/arm/sunxi.yaml

@@ -342,6 +342,16 @@ properties:
           - const: libretech,all-h3-cc-h5
           - const: allwinner,sun50i-h5
 
+      - description: Libre Computer Board ALL-H3-IT H5
+        items:
+          - const: libretech,all-h3-it-h5
+          - const: allwinner,sun50i-h5
+
+      - description: Libre Computer Board ALL-H5-CC H5
+        items:
+          - const: libretech,all-h5-cc-h5
+          - const: allwinner,sun50i-h5
+
       - description: Lichee Pi One
         items:
           - const: licheepi,licheepi-one
@@ -470,6 +480,12 @@ properties:
           - const: emlid,neutis-n5
           - const: allwinner,sun50i-h5
 
+      - description: Emlid Neutis N5H3 Developper Board
+        items:
+          - const: emlid,neutis-n5h3-devboard
+          - const: emlid,neutis-n5h3
+          - const: allwinner,sun8i-h3
+
       - description: NextThing Co. CHIP
         items:
           - const: nextthing,chip
@@ -599,11 +615,16 @@ properties:
           - const: pine64,pine64-plus
           - const: allwinner,sun50i-a64
 
-      - description: Pine64 PineH64
+      - description: Pine64 PineH64 model A
         items:
           - const: pine64,pine-h64
           - const: allwinner,sun50i-h6
 
+      - description: Pine64 PineH64 model B
+        items:
+          - const: pine64,pine-h64-model-b
+          - const: allwinner,sun50i-h6
+
       - description: Pine64 LTS
         items:
           - const: pine64,pine64-lts

Documentation/devicetree/bindings/arm/ux500.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ux500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ux500 platforms device tree bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: ST-Ericsson HREF (pre-v60)
+        items:
+          - const: st-ericsson,mop500
+          - const: st-ericsson,u8500
+
+      - description: ST-Ericsson HREF (v60+)
+        items:
+          - const: st-ericsson,hrefv60+
+          - const: st-ericsson,u8500
+
+      - description: Calao Systems Snowball
+        items:
+          - const: calaosystems,snowball-a9500
+          - const: st-ericsson,u9500
+
+      - description: Samsung Galaxy S III mini (GT-I8190)
+        items:
+          - const: samsung,golden
+          - const: st-ericsson,u8500

Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml

+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t Display Engine 2/3 Clock Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-a83t-de2-clk
+      - const: allwinner,sun8i-h3-de2-clk
+      - const: allwinner,sun8i-v3s-de2-clk
+      - const: allwinner,sun50i-a64-de2-clk
+      - const: allwinner,sun50i-h5-de2-clk
+      - const: allwinner,sun50i-h6-de2-clk
+      - items:
+          - const: allwinner,sun8i-r40-de2-clk
+          - const: allwinner,sun8i-h3-de2-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-h3-ccu.h>
+    #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+    de2_clocks: clock@1000000 {
+        compatible = "allwinner,sun8i-h3-de2-clk";
+        reg = <0x01000000 0x100000>;
+        clocks = <&ccu CLK_BUS_DE>,
+                 <&ccu CLK_DE>;
+        clock-names = "bus",
+                      "mod";
+        resets = <&ccu RST_BUS_DE>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...

Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml

+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-de-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Display Engine Clock Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-de-clks
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: RAM Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: mod
+      - const: dram
+      - const: bus
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-ccu.h>
+    #include <dt-bindings/reset/sun9i-a80-ccu.h>
+
+    de_clocks: clock@3000000 {
+        compatible = "allwinner,sun9i-a80-de-clks";
+        reg = <0x03000000 0x30>;
+        clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
+        clock-names = "mod", "dram", "bus";
+        resets = <&ccu RST_BUS_DE>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...

Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml

+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Clock Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-clocks
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: High Frequency Oscillator
+
+  clock-names:
+    items:
+      - const: bus
+      - const: hosc
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-ccu.h>
+
+    usb_clocks: clock@a08000 {
+        compatible = "allwinner,sun9i-a80-usb-clks";
+        reg = <0x00a08000 0x8>;
+        clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+        clock-names = "bus", "hosc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...

Documentation/devicetree/bindings/clock/sun8i-de2.txt

-Allwinner Display Engine 2.0/3.0 Clock Control Binding
-------------------------------------------------------
-
-Required properties :
-- compatible: must contain one of the following compatibles:
-		- "allwinner,sun8i-a83t-de2-clk"
-		- "allwinner,sun8i-h3-de2-clk"
-		- "allwinner,sun8i-v3s-de2-clk"
-		- "allwinner,sun50i-a64-de2-clk"
-		- "allwinner,sun50i-h5-de2-clk"
-		- "allwinner,sun50i-h6-de3-clk"
-
-- reg: Must contain the registers base address and length
-- clocks: phandle to the clocks feeding the display engine subsystem.
-	  Three are needed:
-  - "mod": the display engine module clock (on A83T it's the DE PLL)
-  - "bus": the bus clock for the whole display engine subsystem
-- clock-names: Must contain the clock names described just above
-- resets: phandle to the reset control for the display engine subsystem.
-- #clock-cells : must contain 1
-- #reset-cells : must contain 1
-
-Example:
-de2_clocks: clock@1000000 {
-	compatible = "allwinner,sun8i-h3-de2-clk";
-	reg = <0x01000000 0x100000>;
-	clocks = <&ccu CLK_BUS_DE>,
-		 <&ccu CLK_DE>;
-	clock-names = "bus",
-		      "mod";
-	resets = <&ccu RST_BUS_DE>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};

Documentation/devicetree/bindings/clock/sun9i-de.txt

-Allwinner A80 Display Engine Clock Control Binding
---------------------------------------------------
-
-Required properties :
-- compatible: must contain one of the following compatibles:
-		- "allwinner,sun9i-a80-de-clks"
-
-- reg: Must contain the registers base address and length
-- clocks: phandle to the clocks feeding the display engine subsystem.
-	  Three are needed:
-  - "mod": the display engine module clock
-  - "dram": the DRAM bus clock for the system
-  - "bus": the bus clock for the whole display engine subsystem
-- clock-names: Must contain the clock names described just above
-- resets: phandle to the reset control for the display engine subsystem.
-- #clock-cells : must contain 1
-- #reset-cells : must contain 1
-
-Example:
-de_clocks: clock@3000000 {
-	compatible = "allwinner,sun9i-a80-de-clks";
-	reg = <0x03000000 0x30>;
-	clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
-	clock-names = "mod", "dram", "bus";
-	resets = <&ccu RST_BUS_DE>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};

Documentation/devicetree/bindings/clock/sun9i-usb.txt

-Allwinner A80 USB Clock Control Binding
----------------------------------------
-
-Required properties :
-- compatible: must contain one of the following compatibles:
-		- "allwinner,sun9i-a80-usb-clocks"
-
-- reg: Must contain the registers base address and length
-- clocks: phandle to the clocks feeding the USB subsystem. Two are needed:
-  - "bus": the bus clock for the whole USB subsystem
-  - "hosc": the high frequency oscillator (usually at 24MHz)
-- clock-names: Must contain the clock names described just above
-- #clock-cells : must contain 1
-- #reset-cells : must contain 1
-
-Example:
-usb_clocks: clock@a08000 {
-	compatible = "allwinner,sun9i-a80-usb-clks";
-	reg = <0x00a08000 0x8>;
-	clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
-	clock-names = "bus", "hosc";
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};

Documentation/devicetree/bindings/display/mxsfb.txt

@@ -6,6 +6,7 @@ Required properties:
 - compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
 		Should be "fsl,imx28-lcdif" for i.MX28.
 		Should be "fsl,imx6sx-lcdif" for i.MX6SX.
+		Should be "fsl,imx8mq-lcdif" for i.MX8MQ.
 - reg:		Address and length of the register set for LCDIF
 - interrupts:	Should contain LCDIF interrupt
 - clocks:	A list of phandle + clock-specifier pairs, one for each

Documentation/devicetree/bindings/dma/atmel-xdma.txt

@@ -2,9 +2,7 @@
 
 * XDMA Controller
 Required properties:
-- compatible: Should be "atmel,<chip>-dma".
-  <chip> compatible description:
-  - sama5d4: first SoC adding the XDMAC
+- compatible: Should be "atmel,sama5d4-dma" or "microchip,sam9x60-dma".
 - reg: Should contain DMA registers location and length.
 - interrupts: Should contain DMA interrupt.
 - #dma-cells: Must be <1>, used to represent the number of integer cells in

Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml

@@ -18,6 +18,7 @@ properties:
       - enum:
           - amlogic,meson-g12a-mali
           - realtek,rtd1619-mali
+          - rockchip,px30-mali
       - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
 
   reg:

Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt

 * AT91 SAMA5D2 Analog to Digital Converter (ADC)
 
 Required properties:
-  - compatible: Should be "atmel,sama5d2-adc".
+  - compatible: Should be "atmel,sama5d2-adc" or "microchip,sam9x60-adc".
   - reg: Should contain ADC registers location and length.
   - interrupts: Should contain the IRQ line for the ADC.
   - clocks: phandle to device clock.

Documentation/devicetree/bindings/media/atmel-isi.txt

@@ -2,7 +2,7 @@ Atmel Image Sensor Interface (ISI)
 ----------------------------------
 
 Required properties for ISI:
-- compatible: must be "atmel,at91sam9g45-isi".
+- compatible: must be "atmel,at91sam9g45-isi" or "microchip,sam9x60-isi".
 - reg: physical base address and length of the registers set for the device.
 - interrupts: should contain IRQ line for the ISI.
 - clocks: list of clock specifiers, corresponding to entries in the clock-names