diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 433cf5e9ae04bd17a04d50c320db9f100c68da63..5f7f7d7f77d25ebbfdd2f31359257991d92dc69a 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -24,6 +24,8 @@ DMA-mapping.txt
- info for PCI drivers using DMA portably across all platforms.
DocBook/
- directory with DocBook templates etc. for kernel documentation.
+HOWTO
+ - The process and procedures of how to do Linux kernel development.
IO-mapping.txt
- how to access I/O mapped memory from within device drivers.
IPMI.txt
@@ -256,6 +258,10 @@ specialix.txt
- info on hardware/driver for specialix IO8+ multiport serial card.
spinlocks.txt
- info on using spinlocks to provide exclusive access in kernel.
+stable_api_nonsense.txt
+ - info on why the kernel does not have a stable in-kernel api or abi.
+stable_kernel_rules.txt
+ - rules and procedures for the -stable kernel releases.
stallion.txt
- info on using the Stallion multiport serial driver.
svga.txt
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
new file mode 100644
index 0000000000000000000000000000000000000000..6c9e746267da692c0759a93803ebbdb943bc5f94
--- /dev/null
+++ b/Documentation/HOWTO
@@ -0,0 +1,618 @@
+HOWTO do Linux kernel development
+---------------------------------
+
+This is the be-all, end-all document on this topic. It contains
+instructions on how to become a Linux kernel developer and how to learn
+to work with the Linux kernel development community. It tries to not
+contain anything related to the technical aspects of kernel programming,
+but will help point you in the right direction for that.
+
+If anything in this document becomes out of date, please send in patches
+to the maintainer of this file, who is listed at the bottom of the
+document.
+
+
+Introduction
+------------
+
+So, you want to learn how to become a Linux kernel developer? Or you
+have been told by your manager, "Go write a Linux driver for this
+device." This document's goal is to teach you everything you need to
+know to achieve this by describing the process you need to go through,
+and hints on how to work with the community. It will also try to
+explain some of the reasons why the community works like it does.
+
+The kernel is written mostly in C, with some architecture-dependent
+parts written in assembly. A good understanding of C is required for
+kernel development. Assembly (any architecture) is not required unless
+you plan to do low-level development for that architecture. Though they
+are not a good substitute for a solid C education and/or years of
+experience, the following books are good for, if anything, reference:
+ - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall]
+ - "Practical C Programming" by Steve Oualline [O'Reilly]
+
+The kernel is written using GNU C and the GNU toolchain. While it
+adheres to the ISO C89 standard, it uses a number of extensions that are
+not featured in the standard. The kernel is a freestanding C
+environment, with no reliance on the standard C library, so some
+portions of the C standard are not supported. Arbitrary long long
+divisions and floating point are not allowed. It can sometimes be
+difficult to understand the assumptions the kernel has on the toolchain
+and the extensions that it uses, and unfortunately there is no
+definitive reference for them. Please check the gcc info pages (`info
+gcc`) for some information on them.
+
+Please remember that you are trying to learn how to work with the
+existing development community. It is a diverse group of people, with
+high standards for coding, style and procedure. These standards have
+been created over time based on what they have found to work best for
+such a large and geographically dispersed team. Try to learn as much as
+possible about these standards ahead of time, as they are well
+documented; do not expect people to adapt to you or your company's way
+of doing things.
+
+
+Legal Issues
+------------
+
+The Linux kernel source code is released under the GPL. Please see the
+file, COPYING, in the main directory of the source tree, for details on
+the license. If you have further questions about the license, please
+contact a lawyer, and do not ask on the Linux kernel mailing list. The
+people on the mailing lists are not lawyers, and you should not rely on
+their statements on legal matters.
+
+For common questions and answers about the GPL, please see:
+ http://www.gnu.org/licenses/gpl-faq.html
+
+
+Documentation
+------------
+
+The Linux kernel source tree has a large range of documents that are
+invaluable for learning how to interact with the kernel community. When
+new features are added to the kernel, it is recommended that new
+documentation files are also added which explain how to use the feature.
+When a kernel change causes the interface that the kernel exposes to
+userspace to change, it is recommended that you send the information or
+a patch to the manual pages explaining the change to the manual pages
+maintainer at mtk-manpages@gmx.net.
+
+Here is a list of files that are in the kernel source tree that are
+required reading:
+ README
+ This file gives a short background on the Linux kernel and describes
+ what is necessary to do to configure and build the kernel. People
+ who are new to the kernel should start here.
+
+ Documentation/Changes
+ This file gives a list of the minimum levels of various software
+ packages that are necessary to build and run the kernel
+ successfully.
+
+ Documentation/CodingStyle
+ This describes the Linux kernel coding style, and some of the
+ rationale behind it. All new code is expected to follow the
+ guidelines in this document. Most maintainers will only accept
+ patches if these rules are followed, and many people will only
+ review code if it is in the proper style.
+
+ Documentation/SubmittingPatches
+ Documentation/SubmittingDrivers
+ These files describe in explicit detail how to successfully create
+ and send a patch, including (but not limited to):
+ - Email contents
+ - Email format
+ - Who to send it to
+ Following these rules will not guarantee success (as all patches are
+ subject to scrutiny for content and style), but not following them
+ will almost always prevent it.
+
+ Other excellent descriptions of how to create patches properly are:
+ "The Perfect Patch"
+ http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+ "Linux kernel patch submission format"
+ http://linux.yyz.us/patch-format.html
+
+ Documentation/stable_api_nonsense.txt
+ This file describes the rationale behind the conscious decision to
+ not have a stable API within the kernel, including things like:
+ - Subsystem shim-layers (for compatibility?)
+ - Driver portability between Operating Systems.
+ - Mitigating rapid change within the kernel source tree (or
+ preventing rapid change)
+ This document is crucial for understanding the Linux development
+ philosophy and is very important for people moving to Linux from
+ development on other Operating Systems.
+
+ Documentation/SecurityBugs
+ If you feel you have found a security problem in the Linux kernel,
+ please follow the steps in this document to help notify the kernel
+ developers, and help solve the issue.
+
+ Documentation/ManagementStyle
+ This document describes how Linux kernel maintainers operate and the
+ shared ethos behind their methodologies. This is important reading
+ for anyone new to kernel development (or anyone simply curious about
+ it), as it resolves a lot of common misconceptions and confusion
+ about the unique behavior of kernel maintainers.
+
+ Documentation/stable_kernel_rules.txt
+ This file describes the rules on how the stable kernel releases
+ happen, and what to do if you want to get a change into one of these
+ releases.
+
+ Documentation/kernel-docs.txt
+ A list of external documentation that pertains to kernel
+ development. Please consult this list if you do not find what you
+ are looking for within the in-kernel documentation.
+
+ Documentation/applying-patches.txt
+ A good introduction describing exactly what a patch is and how to
+ apply it to the different development branches of the kernel.
+
+The kernel also has a large number of documents that can be
+automatically generated from the source code itself. This includes a
+full description of the in-kernel API, and rules on how to handle
+locking properly. The documents will be created in the
+Documentation/DocBook/ directory and can be generated as PDF,
+Postscript, HTML, and man pages by running:
+ make pdfdocs
+ make psdocs
+ make htmldocs
+ make mandocs
+respectively from the main kernel source directory.
+
+
+Becoming A Kernel Developer
+---------------------------
+
+If you do not know anything about Linux kernel development, you should
+look at the Linux KernelNewbies project:
+ http://kernelnewbies.org
+It consists of a helpful mailing list where you can ask almost any type
+of basic kernel development question (make sure to search the archives
+first, before asking something that has already been answered in the
+past.) It also has an IRC channel that you can use to ask questions in
+real-time, and a lot of helpful documentation that is useful for
+learning about Linux kernel development.
+
+The website has basic information about code organization, subsystems,
+and current projects (both in-tree and out-of-tree). It also describes
+some basic logistical information, like how to compile a kernel and
+apply a patch.
+
+If you do not know where you want to start, but you want to look for
+some task to start doing to join into the kernel development community,
+go to the Linux Kernel Janitor's project:
+ http://janitor.kernelnewbies.org/
+It is a great place to start. It describes a list of relatively simple
+problems that need to be cleaned up and fixed within the Linux kernel
+source tree. Working with the developers in charge of this project, you
+will learn the basics of getting your patch into the Linux kernel tree,
+and possibly be pointed in the direction of what to go work on next, if
+you do not already have an idea.
+
+If you already have a chunk of code that you want to put into the kernel
+tree, but need some help getting it in the proper form, the
+kernel-mentors project was created to help you out with this. It is a
+mailing list, and can be found at:
+ http://selenic.com/mailman/listinfo/kernel-mentors
+
+Before making any actual modifications to the Linux kernel code, it is
+imperative to understand how the code in question works. For this
+purpose, nothing is better than reading through it directly (most tricky
+bits are commented well), perhaps even with the help of specialized
+tools. One such tool that is particularly recommended is the Linux
+Cross-Reference project, which is able to present source code in a
+self-referential, indexed webpage format. An excellent up-to-date
+repository of the kernel code may be found at:
+ http://sosdg.org/~coywolf/lxr/
+
+
+The development process
+-----------------------
+
+Linux kernel development process currently consists of a few different
+main kernel "branches" and lots of different subsystem-specific kernel
+branches. These different branches are:
+ - main 2.6.x kernel tree
+ - 2.6.x.y -stable kernel tree
+ - 2.6.x -git kernel patches
+ - 2.6.x -mm kernel patches
+ - subsystem specific kernel trees and patches
+
+2.6.x kernel tree
+-----------------
+2.6.x kernels are maintained by Linus Torvalds, and can be found on
+kernel.org in the pub/linux/kernel/v2.6/ directory. Its development
+process is as follows:
+ - As soon as a new kernel is released a two weeks window is open,
+ during this period of time maintainers can submit big diffs to
+ Linus, usually the patches that have already been included in the
+ -mm kernel for a few weeks. The preferred way to submit big changes
+ is using git (the kernel's source management tool, more information
+ can be found at http://git.or.cz/) but plain patches are also just
+ fine.
+ - After two weeks a -rc1 kernel is released it is now possible to push
+ only patches that do not include new features that could affect the
+ stability of the whole kernel. Please note that a whole new driver
+ (or filesystem) might be accepted after -rc1 because there is no
+ risk of causing regressions with such a change as long as the change
+ is self-contained and does not affect areas outside of the code that
+ is being added. git can be used to send patches to Linus after -rc1
+ is released, but the patches need to also be sent to a public
+ mailing list for review.
+ - A new -rc is released whenever Linus deems the current git tree to
+ be in a reasonably sane state adequate for testing. The goal is to
+ release a new -rc kernel every week.
+ - Process continues until the kernel is considered "ready", the
+ process should last around 6 weeks.
+
+It is worth mentioning what Andrew Morton wrote on the linux-kernel
+mailing list about kernel releases:
+ "Nobody knows when a kernel will be released, because it's
+ released according to perceived bug status, not according to a
+ preconceived timeline."
+
+2.6.x.y -stable kernel tree
+---------------------------
+Kernels with 4 digit versions are -stable kernels. They contain
+relatively small and critical fixes for security problems or significant
+regressions discovered in a given 2.6.x kernel.
+
+This is the recommended branch for users who want the most recent stable
+kernel and are not interested in helping test development/experimental
+versions.
+
+If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
+kernel is the current stable kernel.
+
+2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are
+released almost every other week.
+
+The file Documentation/stable_kernel_rules.txt in the kernel tree
+documents what kinds of changes are acceptable for the -stable tree, and
+how the release process works.
+
+2.6.x -git patches
+------------------
+These are daily snapshots of Linus' kernel tree which are managed in a
+git repository (hence the name.) These patches are usually released
+daily and represent the current state of Linus' tree. They are more
+experimental than -rc kernels since they are generated automatically
+without even a cursory glance to see if they are sane.
+
+2.6.x -mm kernel patches
+------------------------
+These are experimental kernel patches released by Andrew Morton. Andrew
+takes all of the different subsystem kernel trees and patches and mushes
+them together, along with a lot of patches that have been plucked from
+the linux-kernel mailing list. This tree serves as a proving ground for
+new features and patches. Once a patch has proved its worth in -mm for
+a while Andrew or the subsystem maintainer pushes it on to Linus for
+inclusion in mainline.
+
+It is heavily encouraged that all new patches get tested in the -mm tree
+before they are sent to Linus for inclusion in the main kernel tree.
+
+These kernels are not appropriate for use on systems that are supposed
+to be stable and they are more risky to run than any of the other
+branches.
+
+If you wish to help out with the kernel development process, please test
+and use these kernel releases and provide feedback to the linux-kernel
+mailing list if you have any problems, and if everything works properly.
+
+In addition to all the other experimental patches, these kernels usually
+also contain any changes in the mainline -git kernels available at the
+time of release.
+
+The -mm kernels are not released on a fixed schedule, but usually a few
+-mm kernels are released in between each -rc kernel (1 to 3 is common).
+
+Subsystem Specific kernel trees and patches
+-------------------------------------------
+A number of the different kernel subsystem developers expose their
+development trees so that others can see what is happening in the
+different areas of the kernel. These trees are pulled into the -mm
+kernel releases as described above.
+
+Here is a list of some of the different kernel trees available:
+ git trees:
+ - Kbuild development tree, Sam Ravnborg <sam@ravnborg.org>
+ kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
+
+ - ACPI development tree, Len Brown <len.brown@intel.com>
+ kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
+
+ - Block development tree, Jens Axboe <axboe@suse.de>
+ kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
+
+ - DRM development tree, Dave Airlie <airlied@linux.ie>
+ kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+
+ - ia64 development tree, Tony Luck <tony.luck@intel.com>
+ kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
+
+ - ieee1394 development tree, Jody McIntyre <scjody@modernduck.com>
+ kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
+
+ - infiniband, Roland Dreier <rolandd@cisco.com>
+ kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
+
+ - libata, Jeff Garzik <jgarzik@pobox.com>
+ kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
+
+ - network drivers, Jeff Garzik <jgarzik@pobox.com>
+ kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
+
+ - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
+ kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
+
+ - SCSI, James Bottomley <James.Bottomley@SteelEye.com>
+ kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
+
+ Other git kernel trees can be found listed at http://kernel.org/git
+
+ quilt trees:
+ - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de>
+ kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+
+
+Bug Reporting
+-------------
+
+bugzilla.kernel.org is where the Linux kernel developers track kernel
+bugs. Users are encouraged to report all bugs that they find in this
+tool. For details on how to use the kernel bugzilla, please see:
+ http://test.kernel.org/bugzilla/faq.html
+
+The file REPORTING-BUGS in the main kernel source directory has a good
+template for how to report a possible kernel bug, and details what kind
+of information is needed by the kernel developers to help track down the
+problem.
+
+
+Mailing lists
+-------------
+
+As some of the above documents describe, the majority of the core kernel
+developers participate on the Linux Kernel Mailing list. Details on how
+to subscribe and unsubscribe from the list can be found at:
+ http://vger.kernel.org/vger-lists.html#linux-kernel
+There are archives of the mailing list on the web in many different
+places. Use a search engine to find these archives. For example:
+ http://dir.gmane.org/gmane.linux.kernel
+It is highly recommended that you search the archives about the topic
+you want to bring up, before you post it to the list. A lot of things
+already discussed in detail are only recorded at the mailing list
+archives.
+
+Most of the individual kernel subsystems also have their own separate
+mailing list where they do their development efforts. See the
+MAINTAINERS file for a list of what these lists are for the different
+groups.
+
+Many of the lists are hosted on kernel.org. Information on them can be
+found at:
+ http://vger.kernel.org/vger-lists.html
+
+Please remember to follow good behavioral habits when using the lists.
+Though a bit cheesy, the following URL has some simple guidelines for
+interacting with the list (or any list):
+ http://www.albion.com/netiquette/
+
+If multiple people respond to your mail, the CC: list of recipients may
+get pretty large. Don't remove anybody from the CC: list without a good
+reason, or don't reply only to the list address. Get used to receiving the
+mail twice, one from the sender and the one from the list, and don't try
+to tune that by adding fancy mail-headers, people will not like it.
+
+Remember to keep the context and the attribution of your replies intact,
+keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and
+add your statements between the individual quoted sections instead of
+writing at the top of the mail.
+
+If you add patches to your mail, make sure they are plain readable text
+as stated in Documentation/SubmittingPatches. Kernel developers don't
+want to deal with attachments or compressed patches; they may want
+to comment on individual lines of your patch, which works only that way.
+Make sure you use a mail program that does not mangle spaces and tab
+characters. A good first test is to send the mail to yourself and try
+to apply your own patch by yourself. If that doesn't work, get your
+mail program fixed or change it until it works.
+
+Above all, please remember to show respect to other subscribers.
+
+
+Working with the community
+--------------------------
+
+The goal of the kernel community is to provide the best possible kernel
+there is. When you submit a patch for acceptance, it will be reviewed
+on its technical merits and those alone. So, what should you be
+expecting?
+ - criticism
+ - comments
+ - requests for change
+ - requests for justification
+ - silence
+
+Remember, this is part of getting your patch into the kernel. You have
+to be able to take criticism and comments about your patches, evaluate
+them at a technical level and either rework your patches or provide
+clear and concise reasoning as to why those changes should not be made.
+If there are no responses to your posting, wait a few days and try
+again, sometimes things get lost in the huge volume.
+
+What should you not do?
+ - expect your patch to be accepted without question
+ - become defensive
+ - ignore comments
+ - resubmit the patch without making any of the requested changes
+
+In a community that is looking for the best technical solution possible,
+there will always be differing opinions on how beneficial a patch is.
+You have to be cooperative, and willing to adapt your idea to fit within
+the kernel. Or at least be willing to prove your idea is worth it.
+Remember, being wrong is acceptable as long as you are willing to work
+toward a solution that is right.
+
+It is normal that the answers to your first patch might simply be a list
+of a dozen things you should correct. This does _not_ imply that your
+patch will not be accepted, and it is _not_ meant against you
+personally. Simply correct all issues raised against your patch and
+resend it.
+
+
+Differences between the kernel community and corporate structures
+-----------------------------------------------------------------
+
+The kernel community works differently than most traditional corporate
+development environments. Here are a list of things that you can try to
+do to try to avoid problems:
+ Good things to say regarding your proposed changes:
+ - "This solves multiple problems."
+ - "This deletes 2000 lines of code."
+ - "Here is a patch that explains what I am trying to describe."
+ - "I tested it on 5 different architectures..."
+ - "Here is a series of small patches that..."
+ - "This increases performance on typical machines..."
+
+ Bad things you should avoid saying:
+ - "We did it this way in AIX/ptx/Solaris, so therefore it must be
+ good..."
+ - "I've being doing this for 20 years, so..."
+ - "This is required for my company to make money"
+ - "This is for our Enterprise product line."
+ - "Here is my 1000 page design document that describes my idea"
+ - "I've been working on this for 6 months..."
+ - "Here's a 5000 line patch that..."
+ - "I rewrote all of the current mess, and here it is..."
+ - "I have a deadline, and this patch needs to be applied now."
+
+Another way the kernel community is different than most traditional
+software engineering work environments is the faceless nature of
+interaction. One benefit of using email and irc as the primary forms of
+communication is the lack of discrimination based on gender or race.
+The Linux kernel work environment is accepting of women and minorities
+because all you are is an email address. The international aspect also
+helps to level the playing field because you can't guess gender based on
+a person's name. A man may be named Andrea and a woman may be named Pat.
+Most women who have worked in the Linux kernel and have expressed an
+opinion have had positive experiences.
+
+The language barrier can cause problems for some people who are not
+comfortable with English. A good grasp of the language can be needed in
+order to get ideas across properly on mailing lists, so it is
+recommended that you check your emails to make sure they make sense in
+English before sending them.
+
+
+Break up your changes
+---------------------
+
+The Linux kernel community does not gladly accept large chunks of code
+dropped on it all at once. The changes need to be properly introduced,
+discussed, and broken up into tiny, individual portions. This is almost
+the exact opposite of what companies are used to doing. Your proposal
+should also be introduced very early in the development process, so that
+you can receive feedback on what you are doing. It also lets the
+community feel that you are working with them, and not simply using them
+as a dumping ground for your feature. However, don't send 50 emails at
+one time to a mailing list, your patch series should be smaller than
+that almost all of the time.
+
+The reasons for breaking things up are the following:
+
+1) Small patches increase the likelihood that your patches will be
+ applied, since they don't take much time or effort to verify for
+ correctness. A 5 line patch can be applied by a maintainer with
+ barely a second glance. However, a 500 line patch may take hours to
+ review for correctness (the time it takes is exponentially
+ proportional to the size of the patch, or something).
+
+ Small patches also make it very easy to debug when something goes
+ wrong. It's much easier to back out patches one by one than it is
+ to dissect a very large patch after it's been applied (and broken
+ something).
+
+2) It's important not only to send small patches, but also to rewrite
+ and simplify (or simply re-order) patches before submitting them.
+
+Here is an analogy from kernel developer Al Viro:
+ "Think of a teacher grading homework from a math student. The
+ teacher does not want to see the student's trials and errors
+ before they came up with the solution. They want to see the
+ cleanest, most elegant answer. A good student knows this, and
+ would never submit her intermediate work before the final
+ solution."
+
+ The same is true of kernel development. The maintainers and
+ reviewers do not want to see the thought process behind the
+ solution to the problem one is solving. They want to see a
+ simple and elegant solution."
+
+It may be challenging to keep the balance between presenting an elegant
+solution and working together with the community and discussing your
+unfinished work. Therefore it is good to get early in the process to
+get feedback to improve your work, but also keep your changes in small
+chunks that they may get already accepted, even when your whole task is
+not ready for inclusion now.
+
+Also realize that it is not acceptable to send patches for inclusion
+that are unfinished and will be "fixed up later."
+
+
+Justify your change
+-------------------
+
+Along with breaking up your patches, it is very important for you to let
+the Linux community know why they should add this change. New features
+must be justified as being needed and useful.
+
+
+Document your change
+--------------------
+
+When sending in your patches, pay special attention to what you say in
+the text in your email. This information will become the ChangeLog
+information for the patch, and will be preserved for everyone to see for
+all time. It should describe the patch completely, containing:
+ - why the change is necessary
+ - the overall design approach in the patch
+ - implementation details
+ - testing results
+
+For more details on what this should all look like, please see the
+ChangeLog section of the document:
+ "The Perfect Patch"
+ http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+
+
+
+
+All of these things are sometimes very hard to do. It can take years to
+perfect these practices (if at all). It's a continuous process of
+improvement that requires a lot of patience and determination. But
+don't give up, it's possible. Many have done it before, and each had to
+start exactly where you are now.
+
+
+
+
+----------
+Thanks to Paolo Ciarrocchi who allowed the "Development Process" section
+to be based on text he had written, and to Randy Dunlap and Gerrit
+Huizenga for some of the list of things you should and should not say.
+Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
+Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi
+Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop,
+David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard for
+their review, comments, and contributions. Without their help, this
+document would not have been possible.
+
+
+
+Maintainer: Greg Kroah-Hartman <greg@kroah.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index 509927e40bbbf92c9802aac8064a7ae82e18e5aa..f239ac4762ddb4565954c49135dff2adb1a364b5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -58,6 +58,7 @@ P: Person
M: Mail patches to
L: Mailing list that is relevant to this area
W: Web-page with status/info
+T: SCM tree type and URL. Type is one of: git, hg, quilt.
S: Status, one of the following:
Supported: Someone is actually paid to look after this.
@@ -183,6 +184,7 @@ P: Len Brown
M: len.brown@intel.com
L: acpi-devel@lists.sourceforge.net
W: http://acpi.sourceforge.net/
+T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
S: Maintained
AD1816 SOUND DRIVER
@@ -418,6 +420,7 @@ BLOCK LAYER
P: Jens Axboe
M: axboe@suse.de
L: linux-kernel@vger.kernel.org
+T: git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
S: Maintained
BLUETOOTH SUBSYSTEM
@@ -803,12 +806,14 @@ DRIVER CORE, KOBJECTS, AND SYSFS
P: Greg Kroah-Hartman
M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
+T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
DRM DRIVERS
P: David Airlie
M: airlied@linux.ie
L: dri-devel@lists.sourceforge.net
+T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
DSCC4 DRIVER
@@ -1113,6 +1118,7 @@ P: Jean Delvare
M: khali@linux-fr.org
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.nu/
+T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Maintained
I2O
@@ -1145,6 +1151,7 @@ P: Tony Luck
M: tony.luck@intel.com
L: linux-ia64@vger.kernel.org
W: http://www.ia64-linux.org/
+T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
S: Maintained
SN-IA64 (Itanium) SUB-PLATFORM
@@ -1212,6 +1219,7 @@ P: Jody McIntyre
M: scjody@steamballoon.com
L: linux1394-devel@lists.sourceforge.net
W: http://www.linux1394.org/
+T: git kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
S: Maintained
IEEE 1394 OHCI DRIVER
@@ -1263,6 +1271,7 @@ P: Hal Rosenstock
M: halr@voltaire.com
L: openib-general@openib.org
W: http://www.openib.org/
+T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
S: Supported
INPUT (KEYBOARD, MOUSE, JOYSTICK) DRIVERS
@@ -1436,6 +1445,7 @@ P: Kai Germaschewski
M: kai@germaschewski.name
P: Sam Ravnborg
M: sam@ravnborg.org
+T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
S: Maintained
KERNEL JANITORS
@@ -1782,6 +1792,7 @@ M: akpm@osdl.org
P: Jeff Garzik
M: jgarzik@pobox.com
L: netdev@vger.kernel.org
+T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
S: Maintained
NETWORKING [GENERAL]
@@ -1959,6 +1970,7 @@ P: Greg Kroah-Hartman
M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
L: linux-pci@atrey.karlin.mff.cuni.cz
+T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
PCI HOTPLUG CORE
@@ -1980,6 +1992,7 @@ S: Maintained
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
+T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
S: Maintained
PCNET32 NETWORK DRIVER
@@ -2189,6 +2202,7 @@ SCSI SUBSYSTEM
P: James E.J. Bottomley
M: James.Bottomley@SteelEye.com
L: linux-scsi@vger.kernel.org
+T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
S: Maintained
SCSI TAPE DRIVER
@@ -2228,6 +2242,7 @@ SERIAL ATA (SATA) SUBSYSTEM:
P: Jeff Garzik
M: jgarzik@pobox.com
L: linux-ide@vger.kernel.org
+T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
S: Supported
SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
@@ -2749,6 +2764,7 @@ M: gregkh@suse.de
L: linux-usb-users@lists.sourceforge.net
L: linux-usb-devel@lists.sourceforge.net
W: http://www.linux-usb.org
+T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
USB UHCI DRIVER
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index e06f21f60dc552e4f4bfba4fdc2abb0ab969576d..301f2e9d262edbf57ccb07e9afc47cc5b24bb160 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -91,16 +91,17 @@ ENTRY(vhpt_miss)
* (the "original") TLB miss, which may either be caused by an instruction
* fetch or a data access (or non-access).
*
- * What we do here is normal TLB miss handing for the _original_ miss, followed
- * by inserting the TLB entry for the virtual page table page that the VHPT
- * walker was attempting to access. The latter gets inserted as long
- * as both L1 and L2 have valid mappings for the faulting address.
- * The TLB entry for the original miss gets inserted only if
- * the L3 entry indicates that the page is present.
+ * What we do here is normal TLB miss handing for the _original_ miss,
+ * followed by inserting the TLB entry for the virtual page table page
+ * that the VHPT walker was attempting to access. The latter gets
+ * inserted as long as page table entry above pte level have valid
+ * mappings for the faulting address. The TLB entry for the original
+ * miss gets inserted only if the pte entry indicates that the page is
+ * present.
*
* do_page_fault gets invoked in the following cases:
* - the faulting virtual address uses unimplemented address bits
- * - the faulting virtual address has no L1, L2, or L3 mapping
+ * - the faulting virtual address has no valid page table mapping
*/
mov r16=cr.ifa // get address that caused the TLB miss
#ifdef CONFIG_HUGETLB_PAGE
@@ -126,7 +127,7 @@ ENTRY(vhpt_miss)
#endif
;;
cmp.eq p6,p7=5,r17 // is IFA pointing into to region 5?
- shr.u r18=r22,PGDIR_SHIFT // get bits 33-63 of the faulting address
+ shr.u r18=r22,PGDIR_SHIFT // get bottom portion of pgd index bit
;;
(p7) dep r17=r17,r19,(PAGE_SHIFT-3),3 // put region number bits in place
@@ -137,38 +138,38 @@ ENTRY(vhpt_miss)
(p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
(p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
;;
-(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8
-(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
+(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5
+(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4]
cmp.eq p7,p6=0,r21 // unused address bits all zeroes?
#ifdef CONFIG_PGTABLE_4
- shr.u r28=r22,PUD_SHIFT // shift L2 index into position
+ shr.u r28=r22,PUD_SHIFT // shift pud index into position
#else
- shr.u r18=r22,PMD_SHIFT // shift L3 index into position
+ shr.u r18=r22,PMD_SHIFT // shift pmd index into position
#endif
;;
- ld8 r17=[r17] // fetch the L1 entry (may be 0)
+ ld8 r17=[r17] // get *pgd (may be 0)
;;
-(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL?
+(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL?
#ifdef CONFIG_PGTABLE_4
- dep r28=r28,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
+ dep r28=r28,r17,3,(PAGE_SHIFT-3) // r28=pud_offset(pgd,addr)
;;
- shr.u r18=r22,PMD_SHIFT // shift L3 index into position
-(p7) ld8 r29=[r28] // fetch the L2 entry (may be 0)
+ shr.u r18=r22,PMD_SHIFT // shift pmd index into position
+(p7) ld8 r29=[r28] // get *pud (may be 0)
;;
-(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was L2 entry NULL?
- dep r17=r18,r29,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
+(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was pud_present(*pud) == NULL?
+ dep r17=r18,r29,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr)
#else
- dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
+ dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pgd,addr)
#endif
;;
-(p7) ld8 r20=[r17] // fetch the L3 entry (may be 0)
- shr.u r19=r22,PAGE_SHIFT // shift L4 index into position
+(p7) ld8 r20=[r17] // get *pmd (may be 0)
+ shr.u r19=r22,PAGE_SHIFT // shift pte index into position
;;
-(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L3 entry NULL?
- dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L4 page table entry
+(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was pmd_present(*pmd) == NULL?
+ dep r21=r19,r20,3,(PAGE_SHIFT-3) // r21=pte_offset(pmd,addr)
;;
-(p7) ld8 r18=[r21] // read the L4 PTE
- mov r19=cr.isr // cr.isr bit 0 tells us if this is an insn miss
+(p7) ld8 r18=[r21] // read *pte
+ mov r19=cr.isr // cr.isr bit 32 tells us if this is an insn miss
;;
(p7) tbit.z p6,p7=r18,_PAGE_P_BIT // page present bit cleared?
mov r22=cr.iha // get the VHPT address that caused the TLB miss
@@ -202,25 +203,33 @@ ENTRY(vhpt_miss)
dv_serialize_data
/*
- * Re-check L2 and L3 pagetable. If they changed, we may have received a ptc.g
+ * Re-check pagetable entry. If they changed, we may have received a ptc.g
* between reading the pagetable and the "itc". If so, flush the entry we
- * inserted and retry.
+ * inserted and retry. At this point, we have:
+ *
+ * r28 = equivalent of pud_offset(pgd, ifa)
+ * r17 = equivalent of pmd_offset(pud, ifa)
+ * r21 = equivalent of pte_offset(pmd, ifa)
+ *
+ * r29 = *pud
+ * r20 = *pmd
+ * r18 = *pte
*/
- ld8 r25=[r21] // read L4 entry again
- ld8 r26=[r17] // read L3 PTE again
+ ld8 r25=[r21] // read *pte again
+ ld8 r26=[r17] // read *pmd again
#ifdef CONFIG_PGTABLE_4
- ld8 r18=[r28] // read L2 entry again
+ ld8 r19=[r28] // read *pud again
#endif
cmp.ne p6,p7=r0,r0
;;
- cmp.ne.or.andcm p6,p7=r26,r20 // did L3 entry change
+ cmp.ne.or.andcm p6,p7=r26,r20 // did *pmd change
#ifdef CONFIG_PGTABLE_4
- cmp.ne.or.andcm p6,p7=r29,r18 // did L4 PTE change
+ cmp.ne.or.andcm p6,p7=r19,r29 // did *pud change
#endif
mov r27=PAGE_SHIFT<<2
;;
(p6) ptc.l r22,r27 // purge PTE page translation
-(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L4 PTE change
+(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did *pte change
;;
(p6) ptc.l r16,r27 // purge translation
#endif
@@ -235,19 +244,19 @@ END(vhpt_miss)
ENTRY(itlb_miss)
DBG_FAULT(1)
/*
- * The ITLB handler accesses the L3 PTE via the virtually mapped linear
+ * The ITLB handler accesses the PTE via the virtually mapped linear
* page table. If a nested TLB miss occurs, we switch into physical
- * mode, walk the page table, and then re-execute the L3 PTE read
- * and go on normally after that.
+ * mode, walk the page table, and then re-execute the PTE read and
+ * go on normally after that.
*/
mov r16=cr.ifa // get virtual address
mov r29=b0 // save b0
mov r31=pr // save predicates
.itlb_fault:
- mov r17=cr.iha // get virtual address of L3 PTE
+ mov r17=cr.iha // get virtual address of PTE
movl r30=1f // load nested fault continuation point
;;
-1: ld8 r18=[r17] // read L3 PTE
+1: ld8 r18=[r17] // read *pte
;;
mov b0=r29
tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared?
@@ -262,7 +271,7 @@ ENTRY(itlb_miss)
*/
dv_serialize_data
- ld8 r19=[r17] // read L3 PTE again and see if same
+ ld8 r19=[r17] // read *pte again and see if same
mov r20=PAGE_SHIFT<<2 // setup page size for purge
;;
cmp.ne p7,p0=r18,r19
@@ -279,19 +288,19 @@ END(itlb_miss)
ENTRY(dtlb_miss)
DBG_FAULT(2)
/*
- * The DTLB handler accesses the L3 PTE via the virtually mapped linear
+ * The DTLB handler accesses the PTE via the virtually mapped linear
* page table. If a nested TLB miss occurs, we switch into physical
- * mode, walk the page table, and then re-execute the L3 PTE read
- * and go on normally after that.
+ * mode, walk the page table, and then re-execute the PTE read and
+ * go on normally after that.
*/
mov r16=cr.ifa // get virtual address
mov r29=b0 // save b0
mov r31=pr // save predicates
dtlb_fault:
- mov r17=cr.iha // get virtual address of L3 PTE
+ mov r17=cr.iha // get virtual address of PTE
movl r30=1f // load nested fault continuation point
;;
-1: ld8 r18=[r17] // read L3 PTE
+1: ld8 r18=[r17] // read *pte
;;
mov b0=r29
tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared?
@@ -306,7 +315,7 @@ dtlb_fault:
*/
dv_serialize_data
- ld8 r19=[r17] // read L3 PTE again and see if same
+ ld8 r19=[r17] // read *pte again and see if same
mov r20=PAGE_SHIFT<<2 // setup page size for purge
;;
cmp.ne p7,p0=r18,r19
@@ -420,7 +429,7 @@ ENTRY(nested_dtlb_miss)
* r30: continuation address
* r31: saved pr
*
- * Output: r17: physical address of L3 PTE of faulting address
+ * Output: r17: physical address of PTE of faulting address
* r29: saved b0
* r30: continuation address
* r31: saved pr
@@ -450,33 +459,33 @@ ENTRY(nested_dtlb_miss)
(p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
(p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
;;
-(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8
-(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
+(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5
+(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4]
cmp.eq p7,p6=0,r21 // unused address bits all zeroes?
#ifdef CONFIG_PGTABLE_4
- shr.u r18=r22,PUD_SHIFT // shift L2 index into position
+ shr.u r18=r22,PUD_SHIFT // shift pud index into position
#else
- shr.u r18=r22,PMD_SHIFT // shift L3 index into position
+ shr.u r18=r22,PMD_SHIFT // shift pmd index into position
#endif
;;
- ld8 r17=[r17] // fetch the L1 entry (may be 0)
+ ld8 r17=[r17] // get *pgd (may be 0)
;;
-(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL?
- dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
+(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL?
+ dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=p[u|m]d_offset(pgd,addr)
;;
#ifdef CONFIG_PGTABLE_4
-(p7) ld8 r17=[r17] // fetch the L2 entry (may be 0)
- shr.u r18=r22,PMD_SHIFT // shift L3 index into position
+(p7) ld8 r17=[r17] // get *pud (may be 0)
+ shr.u r18=r22,PMD_SHIFT // shift pmd index into position
;;
-(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L2 entry NULL?
- dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
+(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pud_present(*pud) == NULL?
+ dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr)
;;
#endif
-(p7) ld8 r17=[r17] // fetch the L3 entry (may be 0)
- shr.u r19=r22,PAGE_SHIFT // shift L4 index into position
+(p7) ld8 r17=[r17] // get *pmd (may be 0)
+ shr.u r19=r22,PAGE_SHIFT // shift pte index into position
;;
-(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L3 entry NULL?
- dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L4 page table entry
+(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pmd_present(*pmd) == NULL?
+ dep r17=r19,r17,3,(PAGE_SHIFT-3) // r17=pte_offset(pmd,addr);
(p6) br.cond.spnt page_fault
mov b0=r30
br.sptk.many b0 // return to continuation point
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 94df74bcc0ee71b0b635baf6046e596c20ed8d2c..bb2efdd566a9d590d64184b10b097e4b7ed17e95 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -598,19 +598,6 @@ config ARCH_MEMORY_PROBE
def_bool y
depends on MEMORY_HOTPLUG
-# Some NUMA nodes have memory ranges that span
-# other nodes. Even though a pfn is valid and
-# between a node's start and end pfns, it may not
-# reside on that node.
-#
-# This is a relatively temporary hack that should
-# be able to go away when sparsemem is fully in
-# place
-
-config NODES_SPAN_OTHER_NODES
- def_bool y
- depends on NEED_MULTIPLE_NODES
-
config PPC_64K_PAGES
bool "64k page size"
depends on PPC64
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 99dbea8c5c50d63952a71187589fe673db42e35e..98f67c78d1bd9ad191b6fe9a97849e0f0bf68b70 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -33,6 +33,8 @@ endif
export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
+KBUILD_DEFCONFIG := $(shell uname -m)_defconfig
+
ifeq ($(CONFIG_PPC64),y)
OLDARCH := ppc64
SZ := 64
@@ -111,9 +113,6 @@ cpu-as-$(CONFIG_E200) += -Wa,-me200
AFLAGS += $(cpu-as-y)
CFLAGS += $(cpu-as-y)
-# Default to the common case.
-KBUILD_DEFCONFIG := common_defconfig
-
head-y := arch/powerpc/kernel/head_32.o
head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o
head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o
@@ -125,11 +124,11 @@ head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o
head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o
core-y += arch/powerpc/kernel/ \
- arch/$(OLDARCH)/kernel/ \
arch/powerpc/mm/ \
arch/powerpc/lib/ \
arch/powerpc/sysdev/ \
arch/powerpc/platforms/
+core-$(CONFIG_PPC32) += arch/ppc/kernel/
core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
core-$(CONFIG_APUS) += arch/ppc/amiga/
@@ -165,7 +164,7 @@ define archhelp
@echo ' (your) ~/bin/installkernel or'
@echo ' (distribution) /sbin/installkernel or'
@echo ' install to $$(INSTALL_PATH) and run lilo'
- @echo ' *_defconfig - Select default config from arch/$(ARCH)/ppc/configs'
+ @echo ' *_defconfig - Select default config from arch/$(ARCH)/configs'
endef
archclean:
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
index 9cc442263939750c94b8d55c96cea067668fa9c5..d2f2ace56cd34df5e1203a85ce5248e763e3133a 100644
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -14,43 +14,42 @@
.text
.globl _zimage_start
_zimage_start:
- bl reloc_offset
+ bl 1f
-reloc_offset:
+1:
mflr r0
- lis r9,reloc_offset@ha
- addi r9,r9,reloc_offset@l
+ lis r9,1b@ha
+ addi r9,r9,1b@l
subf. r0,r9,r0
- beq clear_caches
+ beq 3f
-reloc_got2:
lis r9,__got2_start@ha
addi r9,r9,__got2_start@l
lis r8,__got2_end@ha
addi r8,r8,__got2_end@l
subf. r8,r9,r8
- beq clear_caches
+ beq 3f
srwi. r8,r8,2
mtctr r8
add r9,r0,r9
-reloc_got2_loop:
+2:
lwz r8,0(r9)
add r8,r8,r0
stw r8,0(r9)
addi r9,r9,4
- bdnz reloc_got2_loop
+ bdnz 2b
-clear_caches:
+3:
lis r9,_start@h
add r9,r0,r9
lis r8,_etext@ha
addi r8,r8,_etext@l
add r8,r0,r8
-1: dcbf r0,r9
+4: dcbf r0,r9
icbi r0,r9
addi r9,r9,0x20
cmplwi 0,r9,8
- blt 1b
+ blt 4b
sync
isync
diff --git a/arch/ppc64/defconfig b/arch/powerpc/configs/ppc64_defconfig
similarity index 86%
rename from arch/ppc64/defconfig
rename to arch/powerpc/configs/ppc64_defconfig
index e79fd60bc122647abb89741bfd3ce6900eb66418..b5ba3bbd96fbd30fc6b4268265ac0a677e5b314e 100644
--- a/arch/ppc64/defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,18 +1,33 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:28:33 2005
+# Linux kernel version: 2.6.15-rc1
+# Fri Nov 18 16:23:24 2005
#
+CONFIG_PPC64=y
CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
#
# Code maturity level options
@@ -41,7 +56,7 @@ CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -67,78 +82,115 @@ CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
-# CONFIG_PPC_ISERIES is not set
CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
CONFIG_PPC_PSERIES=y
-CONFIG_PPC_BPA=y
CONFIG_PPC_PMAC=y
+CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
-CONFIG_PPC=y
-CONFIG_PPC64=y
+# CONFIG_PPC_CELL is not set
CONFIG_PPC_OF=y
CONFIG_XICS=y
-CONFIG_MPIC=y
-CONFIG_BPA_IIC=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_SPLPAR=y
-CONFIG_KEXEC=y
-CONFIG_IBMVIO=y
CONFIG_U3_DART=y
+CONFIG_MPIC=y
+CONFIG_PPC_RTAS=y
+CONFIG_RTAS_ERROR_LOGGING=y
+CONFIG_RTAS_PROC=y
+CONFIG_RTAS_FLASH=m
+# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
-CONFIG_PPC_PMAC64=y
-CONFIG_BOOTX_TEXT=y
-# CONFIG_POWER4_ONLY is not set
+CONFIG_IBMVIO=y
+# CONFIG_PPC_MPC106 is not set
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_PMAC64=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
+CONFIG_HOTPLUG_CPU=y
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_PPC_SPLPAR=y
+CONFIG_EEH=y
+CONFIG_SCANLOG=m
+CONFIG_LPARCFG=y
+# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-# CONFIG_NUMA is not set
+CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_EEH=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=m
-CONFIG_SCANLOG=m
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_HOTPLUG_CPU=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
-# Bus Options
+# Bus options
#
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_LEGACY_PROC is not set
@@ -158,6 +210,7 @@ CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+CONFIG_KERNEL_START=0xc000000000000000
#
# Networking
@@ -199,6 +252,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
@@ -301,6 +358,10 @@ CONFIG_LLC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -338,13 +399,7 @@ CONFIG_FW_LOADER=y
#
# Parallel port support
#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
+# CONFIG_PARPORT is not set
#
# Plug and Play support
@@ -354,7 +409,6 @@ CONFIG_PARPORT_PC=m
# Block devices
#
CONFIG_BLK_DEV_FD=y
-# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -370,14 +424,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -407,7 +453,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
+# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
@@ -479,6 +525,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -495,10 +542,12 @@ CONFIG_SCSI_SATA_SVW=y
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
@@ -512,8 +561,6 @@ CONFIG_SCSI_SATA_SVW=y
CONFIG_SCSI_IBMVSCSI=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
@@ -608,6 +655,9 @@ CONFIG_IEEE1394_AMDTP=m
CONFIG_ADB_PMU=y
CONFIG_PMAC_SMU=y
CONFIG_THERM_PM72=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
#
# Network device support
@@ -664,7 +714,6 @@ CONFIG_E100=y
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
@@ -684,7 +733,6 @@ CONFIG_E1000=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
-# CONFIG_SPIDER_NET is not set
# CONFIG_MV643XX_ETH is not set
#
@@ -714,7 +762,6 @@ CONFIG_IBMOL=y
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
@@ -722,6 +769,7 @@ CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
@@ -784,7 +832,6 @@ CONFIG_INPUT_PCSPKR=m
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
@@ -817,10 +864,6 @@ CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
CONFIG_HVC_CONSOLE=y
CONFIG_HVCS=m
@@ -834,6 +877,7 @@ CONFIG_HVCS=m
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -851,6 +895,7 @@ CONFIG_MAX_RAW_DEVS=256
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -879,7 +924,6 @@ CONFIG_I2C_AMD8111=y
CONFIG_I2C_KEYWEST=y
CONFIG_I2C_PMAC_SMU=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
@@ -904,6 +948,7 @@ CONFIG_I2C_PMAC_SMU=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -945,7 +990,6 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MACMODES=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
@@ -960,6 +1004,7 @@ CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
@@ -983,7 +1028,6 @@ CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -992,6 +1036,7 @@ CONFIG_FB_RADEON_I2C=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -1012,7 +1057,94 @@ CONFIG_LCD_DEVICE=y
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA PowerMac devices
+#
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
#
# USB support
@@ -1046,12 +1178,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1106,7 +1242,7 @@ CONFIG_USB_HIDDEV=y
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
+# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
@@ -1114,7 +1250,6 @@ CONFIG_USB_PEGASUS=y
#
# USB port drivers
#
-# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
@@ -1163,6 +1298,7 @@ CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
@@ -1358,10 +1494,25 @@ CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
#
# Kernel hacking
@@ -1378,14 +1529,15 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUGGER=y
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
-# CONFIG_PPCDBG is not set
CONFIG_IRQSTACKS=y
+CONFIG_BOOTX_TEXT=y
#
# Security options
@@ -1425,17 +1577,3 @@ CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index b4745c918a4a4c330d463e73a9af947b0837caa5..b589b196eb3f2824a6840d68ef1afa710a24f0f9 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -165,7 +165,6 @@ CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 4970e3721a84ad0edddb960068082e0bd0bc1ada..9ed551b6c17223258785920f1d37ce2d62868ae8 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -12,12 +12,12 @@ CFLAGS_btext.o += -fPIC
endif
obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
- irq.o signal_32.o pmc.o vdso.o
+ irq.o align.o signal_32.o pmc.o vdso.o
obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
signal_64.o ptrace32.o systbl.o \
paca.o ioctl32.o cpu_setup_power4.o \
- firmware.o sysfs.o udbg.o
+ firmware.o sysfs.o udbg.o idle_64.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
@@ -35,6 +35,7 @@ obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o
obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o
udbgscc-$(CONFIG_PPC64) := udbg_scc.o
obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y)
+obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
ifeq ($(CONFIG_PPC_MERGE),y)
@@ -78,5 +79,7 @@ smpobj-$(CONFIG_SMP) += smp.o
endif
+obj-$(CONFIG_PPC64) += $(obj64-y)
+
extra-$(CONFIG_PPC_FPU) += fpu.o
extra-$(CONFIG_PPC64) += entry_64.o
diff --git a/arch/ppc64/kernel/align.c b/arch/powerpc/kernel/align.c
similarity index 51%
rename from arch/ppc64/kernel/align.c
rename to arch/powerpc/kernel/align.c
index 256d5b592aa1e477e33390bb49c210fe18846fa1..faaec9c6f78f1aaf5f7f572e5cbd8035c4c063e9 100644
--- a/arch/ppc64/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -7,6 +7,9 @@
* PowerPC 403GCX/405GP modifications.
* Copyright (c) 2001-2002 PPC64 team, IBM Corp
* 64-bit and Power4 support
+ * Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp
+ * <benh@kernel.crashing.org>
+ * Merge ppc32 and ppc64 implementations
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -38,10 +41,15 @@ struct aligninfo {
#define F 8 /* to/from fp regs */
#define U 0x10 /* update index register */
#define M 0x20 /* multiple load/store */
-#define SW 0x40 /* byte swap */
+#define SW 0x40 /* byte swap int or ... */
+#define S 0x40 /* ... single-precision fp */
+#define SX 0x40 /* byte count in XER */
+#define HARD 0x80 /* string, stwcx. */
#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */
+#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
+
/*
* The PowerPC stores certain bits of the instruction that caused the
* alignment exception in the DSISR register. This array maps those
@@ -57,14 +65,14 @@ static struct aligninfo aligninfo[128] = {
{ 2, LD+SE }, /* 00 0 0101: lha */
{ 2, ST }, /* 00 0 0110: sth */
{ 4, LD+M }, /* 00 0 0111: lmw */
- { 4, LD+F }, /* 00 0 1000: lfs */
+ { 4, LD+F+S }, /* 00 0 1000: lfs */
{ 8, LD+F }, /* 00 0 1001: lfd */
- { 4, ST+F }, /* 00 0 1010: stfs */
+ { 4, ST+F+S }, /* 00 0 1010: stfs */
{ 8, ST+F }, /* 00 0 1011: stfd */
INVALID, /* 00 0 1100 */
- { 8, LD }, /* 00 0 1101: ld */
+ { 8, LD }, /* 00 0 1101: ld/ldu/lwa */
INVALID, /* 00 0 1110 */
- { 8, ST }, /* 00 0 1111: std */
+ { 8, ST }, /* 00 0 1111: std/stdu */
{ 4, LD+U }, /* 00 1 0000: lwzu */
INVALID, /* 00 1 0001 */
{ 4, ST+U }, /* 00 1 0010: stwu */
@@ -73,9 +81,9 @@ static struct aligninfo aligninfo[128] = {
{ 2, LD+SE+U }, /* 00 1 0101: lhau */
{ 2, ST+U }, /* 00 1 0110: sthu */
{ 4, ST+M }, /* 00 1 0111: stmw */
- { 4, LD+F+U }, /* 00 1 1000: lfsu */
+ { 4, LD+F+S+U }, /* 00 1 1000: lfsu */
{ 8, LD+F+U }, /* 00 1 1001: lfdu */
- { 4, ST+F+U }, /* 00 1 1010: stfsu */
+ { 4, ST+F+S+U }, /* 00 1 1010: stfsu */
{ 8, ST+F+U }, /* 00 1 1011: stfdu */
INVALID, /* 00 1 1100 */
INVALID, /* 00 1 1101 */
@@ -89,10 +97,10 @@ static struct aligninfo aligninfo[128] = {
{ 4, LD+SE }, /* 01 0 0101: lwax */
INVALID, /* 01 0 0110 */
INVALID, /* 01 0 0111 */
- { 0, LD }, /* 01 0 1000: lswx */
- { 0, LD }, /* 01 0 1001: lswi */
- { 0, ST }, /* 01 0 1010: stswx */
- { 0, ST }, /* 01 0 1011: stswi */
+ { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */
+ { 4, LD+M+HARD }, /* 01 0 1001: lswi */
+ { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */
+ { 4, ST+M+HARD }, /* 01 0 1011: stswi */
INVALID, /* 01 0 1100 */
{ 8, LD+U }, /* 01 0 1101: ldu */
INVALID, /* 01 0 1110 */
@@ -115,7 +123,7 @@ static struct aligninfo aligninfo[128] = {
INVALID, /* 01 1 1111 */
INVALID, /* 10 0 0000 */
INVALID, /* 10 0 0001 */
- { 0, ST }, /* 10 0 0010: stwcx. */
+ INVALID, /* 10 0 0010: stwcx. */
INVALID, /* 10 0 0011 */
INVALID, /* 10 0 0100 */
INVALID, /* 10 0 0101 */
@@ -144,7 +152,7 @@ static struct aligninfo aligninfo[128] = {
INVALID, /* 10 1 1100 */
INVALID, /* 10 1 1101 */
INVALID, /* 10 1 1110 */
- { L1_CACHE_BYTES, ST }, /* 10 1 1111: dcbz */
+ { 0, ST+HARD }, /* 10 1 1111: dcbz */
{ 4, LD }, /* 11 0 0000: lwzx */
INVALID, /* 11 0 0001 */
{ 4, ST }, /* 11 0 0010: stwx */
@@ -153,9 +161,9 @@ static struct aligninfo aligninfo[128] = {
{ 2, LD+SE }, /* 11 0 0101: lhax */
{ 2, ST }, /* 11 0 0110: sthx */
INVALID, /* 11 0 0111 */
- { 4, LD+F }, /* 11 0 1000: lfsx */
+ { 4, LD+F+S }, /* 11 0 1000: lfsx */
{ 8, LD+F }, /* 11 0 1001: lfdx */
- { 4, ST+F }, /* 11 0 1010: stfsx */
+ { 4, ST+F+S }, /* 11 0 1010: stfsx */
{ 8, ST+F }, /* 11 0 1011: stfdx */
INVALID, /* 11 0 1100 */
{ 8, LD+M }, /* 11 0 1101: lmd */
@@ -169,9 +177,9 @@ static struct aligninfo aligninfo[128] = {
{ 2, LD+SE+U }, /* 11 1 0101: lhaux */
{ 2, ST+U }, /* 11 1 0110: sthux */
INVALID, /* 11 1 0111 */
- { 4, LD+F+U }, /* 11 1 1000: lfsux */
+ { 4, LD+F+S+U }, /* 11 1 1000: lfsux */
{ 8, LD+F+U }, /* 11 1 1001: lfdux */
- { 4, ST+F+U }, /* 11 1 1010: stfsux */
+ { 4, ST+F+S+U }, /* 11 1 1010: stfsux */
{ 8, ST+F+U }, /* 11 1 1011: stfdux */
INVALID, /* 11 1 1100 */
INVALID, /* 11 1 1101 */
@@ -179,45 +187,175 @@ static struct aligninfo aligninfo[128] = {
INVALID, /* 11 1 1111 */
};
-#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
-
+/*
+ * Create a DSISR value from the instruction
+ */
static inline unsigned make_dsisr(unsigned instr)
{
unsigned dsisr;
-
- /* create a DSISR value from the instruction */
- dsisr = (instr & 0x03ff0000) >> 16; /* bits 6:15 --> 22:31 */
-
- if ( IS_XFORM(instr) ) {
- dsisr |= (instr & 0x00000006) << 14; /* bits 29:30 --> 15:16 */
- dsisr |= (instr & 0x00000040) << 8; /* bit 25 --> 17 */
- dsisr |= (instr & 0x00000780) << 3; /* bits 21:24 --> 18:21 */
+
+
+ /* bits 6:15 --> 22:31 */
+ dsisr = (instr & 0x03ff0000) >> 16;
+
+ if (IS_XFORM(instr)) {
+ /* bits 29:30 --> 15:16 */
+ dsisr |= (instr & 0x00000006) << 14;
+ /* bit 25 --> 17 */
+ dsisr |= (instr & 0x00000040) << 8;
+ /* bits 21:24 --> 18:21 */
+ dsisr |= (instr & 0x00000780) << 3;
+ } else {
+ /* bit 5 --> 17 */
+ dsisr |= (instr & 0x04000000) >> 12;
+ /* bits 1: 4 --> 18:21 */
+ dsisr |= (instr & 0x78000000) >> 17;
+ /* bits 30:31 --> 12:13 */
+ if (IS_DSFORM(instr))
+ dsisr |= (instr & 0x00000003) << 18;
}
- else {
- dsisr |= (instr & 0x04000000) >> 12; /* bit 5 --> 17 */
- dsisr |= (instr & 0x78000000) >> 17; /* bits 1: 4 --> 18:21 */
- if ( IS_DSFORM(instr) ) {
- dsisr |= (instr & 0x00000003) << 18; /* bits 30:31 --> 12:13 */
+
+ return dsisr;
+}
+
+/*
+ * The dcbz (data cache block zero) instruction
+ * gives an alignment fault if used on non-cacheable
+ * memory. We handle the fault mainly for the
+ * case when we are running with the cache disabled
+ * for debugging.
+ */
+static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr)
+{
+ long __user *p;
+ int i, size;
+
+#ifdef __powerpc64__
+ size = ppc64_caches.dline_size;
+#else
+ size = L1_CACHE_BYTES;
+#endif
+ p = (long __user *) (regs->dar & -size);
+ if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size))
+ return -EFAULT;
+ for (i = 0; i < size / sizeof(long); ++i)
+ if (__put_user(0, p+i))
+ return -EFAULT;
+ return 1;
+}
+
+/*
+ * Emulate load & store multiple instructions
+ * On 64-bit machines, these instructions only affect/use the
+ * bottom 4 bytes of each register, and the loads clear the
+ * top 4 bytes of the affected register.
+ */
+#ifdef CONFIG_PPC64
+#define REG_BYTE(rp, i) *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4)
+#else
+#define REG_BYTE(rp, i) *((u8 *)(rp) + (i))
+#endif
+
+static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
+ unsigned int reg, unsigned int nb,
+ unsigned int flags, unsigned int instr)
+{
+ unsigned long *rptr;
+ unsigned int nb0, i;
+
+ /*
+ * We do not try to emulate 8 bytes multiple as they aren't really
+ * available in our operating environments and we don't try to
+ * emulate multiples operations in kernel land as they should never
+ * be used/generated there at least not on unaligned boundaries
+ */
+ if (unlikely((nb > 4) || !user_mode(regs)))
+ return 0;
+
+ /* lmw, stmw, lswi/x, stswi/x */
+ nb0 = 0;
+ if (flags & HARD) {
+ if (flags & SX) {
+ nb = regs->xer & 127;
+ if (nb == 0)
+ return 1;
+ } else {
+ if (__get_user(instr,
+ (unsigned int __user *)regs->nip))
+ return -EFAULT;
+ nb = (instr >> 11) & 0x1f;
+ if (nb == 0)
+ nb = 32;
}
+ if (nb + reg * 4 > 128) {
+ nb0 = nb + reg * 4 - 128;
+ nb = 128 - reg * 4;
+ }
+ } else {
+ /* lwm, stmw */
+ nb = (32 - reg) * 4;
}
-
- return dsisr;
+
+ if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
+ return -EFAULT; /* bad address */
+
+ rptr = ®s->gpr[reg];
+ if (flags & LD) {
+ /*
+ * This zeroes the top 4 bytes of the affected registers
+ * in 64-bit mode, and also zeroes out any remaining
+ * bytes of the last register for lsw*.
+ */
+ memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long));
+ if (nb0 > 0)
+ memset(®s->gpr[0], 0,
+ ((nb0 + 3) / 4) * sizeof(unsigned long));
+
+ for (i = 0; i < nb; ++i)
+ if (__get_user(REG_BYTE(rptr, i), addr + i))
+ return -EFAULT;
+ if (nb0 > 0) {
+ rptr = ®s->gpr[0];
+ addr += nb;
+ for (i = 0; i < nb0; ++i)
+ if (__get_user(REG_BYTE(rptr, i), addr + i))
+ return -EFAULT;
+ }
+
+ } else {
+ for (i = 0; i < nb; ++i)
+ if (__put_user(REG_BYTE(rptr, i), addr + i))
+ return -EFAULT;
+ if (nb0 > 0) {
+ rptr = ®s->gpr[0];
+ addr += nb;
+ for (i = 0; i < nb0; ++i)
+ if (__put_user(REG_BYTE(rptr, i), addr + i))
+ return -EFAULT;
+ }
+ }
+ return 1;
}
-int
-fix_alignment(struct pt_regs *regs)
+
+/*
+ * Called on alignment exception. Attempts to fixup
+ *
+ * Return 1 on success
+ * Return 0 if unable to handle the interrupt
+ * Return -EFAULT if data address is bad
+ */
+
+int fix_alignment(struct pt_regs *regs)
{
unsigned int instr, nb, flags;
- int t;
- unsigned long reg, areg;
- unsigned long i;
- int ret;
- unsigned dsisr;
+ unsigned int reg, areg;
+ unsigned int dsisr;
unsigned char __user *addr;
unsigned char __user *p;
- unsigned long __user *lp;
+ int ret, t;
union {
- long ll;
+ u64 ll;
double dd;
unsigned char v[8];
struct {
@@ -231,18 +369,22 @@ fix_alignment(struct pt_regs *regs)
} data;
/*
- * Return 1 on success
- * Return 0 if unable to handle the interrupt
- * Return -EFAULT if data address is bad
+ * We require a complete register set, if not, then our assembly
+ * is broken
*/
+ CHECK_FULL_REGS(regs);
dsisr = regs->dsisr;
+ /* Some processors don't provide us with a DSISR we can use here,
+ * let's make one up from the instruction
+ */
if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) {
- unsigned int real_instr;
- if (__get_user(real_instr, (unsigned int __user *)regs->nip))
- return 0;
- dsisr = make_dsisr(real_instr);
+ unsigned int real_instr;
+ if (unlikely(__get_user(real_instr,
+ (unsigned int __user *)regs->nip)))
+ return -EFAULT;
+ dsisr = make_dsisr(real_instr);
}
/* extract the operation and registers from the dsisr */
@@ -258,33 +400,37 @@ fix_alignment(struct pt_regs *regs)
/* DAR has the operand effective address */
addr = (unsigned char __user *)regs->dar;
- /* A size of 0 indicates an instruction we don't support */
- /* we also don't support the multiples (lmw, stmw, lmd, stmd) */
- if ((nb == 0) || (flags & M))
- return 0; /* too hard or invalid instruction */
-
- /*
- * Special handling for dcbz
- * dcbz may give an alignment exception for accesses to caching inhibited
- * storage
+ /* A size of 0 indicates an instruction we don't support, with
+ * the exception of DCBZ which is handled as a special case here
*/
if (instr == DCBZ)
- addr = (unsigned char __user *) ((unsigned long)addr & -L1_CACHE_BYTES);
+ return emulate_dcbz(regs, addr);
+ if (unlikely(nb == 0))
+ return 0;
+
+ /* Load/Store Multiple instructions are handled in their own
+ * function
+ */
+ if (flags & M)
+ return emulate_multiple(regs, addr, reg, nb, flags, instr);
/* Verify the address of the operand */
- if (user_mode(regs)) {
- if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
- return -EFAULT; /* bad address */
- }
+ if (unlikely(user_mode(regs) &&
+ !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ),
+ addr, nb)))
+ return -EFAULT;
/* Force the fprs into the save area so we can reference them */
if (flags & F) {
- if (!user_mode(regs))
+ /* userland only */
+ if (unlikely(!user_mode(regs)))
return 0;
flush_fp_to_thread(current);
}
-
- /* If we are loading, get the data from user space */
+
+ /* If we are loading, get the data from user space, else
+ * get it from register values
+ */
if (flags & LD) {
data.ll = 0;
ret = 0;
@@ -301,75 +447,62 @@ fix_alignment(struct pt_regs *regs)
case 2:
ret |= __get_user(data.v[6], p++);
ret |= __get_user(data.v[7], p++);
- if (ret)
+ if (unlikely(ret))
return -EFAULT;
}
- }
-
- /* If we are storing, get the data from the saved gpr or fpr */
- if (flags & ST) {
- if (flags & F) {
- if (nb == 4) {
- /* Doing stfs, have to convert to single */
- preempt_disable();
- enable_kernel_fp();
- cvt_df(¤t->thread.fpr[reg], (float *)&data.v[4], ¤t->thread);
- disable_kernel_fp();
- preempt_enable();
- }
- else
- data.dd = current->thread.fpr[reg];
- }
- else
- data.ll = regs->gpr[reg];
- }
-
- /* Swap bytes as needed */
- if (flags & SW) {
- if (nb == 2)
- SWAP(data.v[6], data.v[7]);
- else { /* nb must be 4 */
- SWAP(data.v[4], data.v[7]);
- SWAP(data.v[5], data.v[6]);
- }
- }
-
- /* Sign extend as needed */
- if (flags & SE) {
+ } else if (flags & F)
+ data.dd = current->thread.fpr[reg];
+ else
+ data.ll = regs->gpr[reg];
+
+ /* Perform other misc operations like sign extension, byteswap,
+ * or floating point single precision conversion
+ */
+ switch (flags & ~U) {
+ case LD+SE: /* sign extend */
if ( nb == 2 )
data.ll = data.x16.low16;
else /* nb must be 4 */
data.ll = data.x32.low32;
- }
-
- /* If we are loading, move the data to the gpr or fpr */
- if (flags & LD) {
- if (flags & F) {
- if (nb == 4) {
- /* Doing lfs, have to convert to double */
- preempt_disable();
- enable_kernel_fp();
- cvt_fd((float *)&data.v[4], ¤t->thread.fpr[reg], ¤t->thread);
- disable_kernel_fp();
- preempt_enable();
- }
- else
- current->thread.fpr[reg] = data.dd;
+ break;
+ case LD+S: /* byte-swap */
+ case ST+S:
+ if (nb == 2) {
+ SWAP(data.v[6], data.v[7]);
+ } else {
+ SWAP(data.v[4], data.v[7]);
+ SWAP(data.v[5], data.v[6]);
}
- else
- regs->gpr[reg] = data.ll;
+ break;
+
+ /* Single-precision FP load and store require conversions... */
+ case LD+F+S:
+#ifdef CONFIG_PPC_FPU
+ preempt_disable();
+ enable_kernel_fp();
+ cvt_fd((float *)&data.v[4], &data.dd, ¤t->thread);
+ preempt_enable();
+#else
+ return 0;
+#endif
+ break;
+ case ST+F+S:
+#ifdef CONFIG_PPC_FPU
+ preempt_disable();
+ enable_kernel_fp();
+ cvt_df(&data.dd, (float *)&data.v[4], ¤t->thread);
+ preempt_enable();
+#else
+ return 0;
+#endif
+ break;
}
-
- /* If we are storing, copy the data to the user */
+
+ /* Store result to memory or update registers */
if (flags & ST) {
ret = 0;
p = addr;
switch (nb) {
- case 128: /* Special case - must be dcbz */
- lp = (unsigned long __user *)p;
- for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
- ret |= __put_user(0, lp++);
- break;
case 8:
ret |= __put_user(data.v[0], p++);
ret |= __put_user(data.v[1], p++);
@@ -382,15 +515,16 @@ fix_alignment(struct pt_regs *regs)
ret |= __put_user(data.v[6], p++);
ret |= __put_user(data.v[7], p++);
}
- if (ret)
+ if (unlikely(ret))
return -EFAULT;
- }
-
+ } else if (flags & F)
+ current->thread.fpr[reg] = data.dd;
+ else
+ regs->gpr[reg] = data.ll;
+
/* Update RA as needed */
- if (flags & U) {
+ if (flags & U)
regs->gpr[areg] = regs->dar;
- }
return 1;
}
-
diff --git a/arch/ppc64/kernel/idle.c b/arch/powerpc/kernel/idle_64.c
similarity index 100%
rename from arch/ppc64/kernel/idle.c
rename to arch/powerpc/kernel/idle_64.c
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index f6d84a75ed266bbc2042da47f0c887f59796604b..624a983a9676776fc6e7b7a05cd8c50297efee2b 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -27,14 +27,6 @@
.text
- .align 5
-_GLOBAL(__delay)
- cmpwi 0,r3,0
- mtctr r3
- beqlr
-1: bdnz 1b
- blr
-
/*
* This returns the high 64 bits of the product of two 64-bit numbers.
*/
diff --git a/arch/ppc64/kernel/nvram.c b/arch/powerpc/kernel/nvram_64.c
similarity index 100%
rename from arch/ppc64/kernel/nvram.c
rename to arch/powerpc/kernel/nvram_64.c
diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c
index 7b948662704c9f14b39d3355f5c7922190b2474c..635d3b9a88115ce78a1de332a7270a6d9cf799bc 100644
--- a/arch/powerpc/kernel/rtas-rtc.c
+++ b/arch/powerpc/kernel/rtas-rtc.c
@@ -15,7 +15,7 @@ unsigned long __init rtas_get_boot_time(void)
{
int ret[8];
int error, wait_time;
- unsigned long max_wait_tb;
+ u64 max_wait_tb;
max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
do {
@@ -45,7 +45,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm)
{
int ret[8];
int error, wait_time;
- unsigned long max_wait_tb;
+ u64 max_wait_tb;
max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
do {
@@ -80,7 +80,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm)
int rtas_set_rtc_time(struct rtc_time *tm)
{
int error, wait_time;
- unsigned long max_wait_tb;
+ u64 max_wait_tb;
max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
do {
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 070b4b458aafe73f9de49d0005ab23d6484fefc6..de8479769bb729cf3068e42d7b1488b462c0ff68 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -130,6 +130,34 @@ unsigned long tb_last_stamp;
*/
DEFINE_PER_CPU(unsigned long, last_jiffy);
+void __delay(unsigned long loops)
+{
+ unsigned long start;
+ int diff;
+
+ if (__USE_RTC()) {
+ start = get_rtcl();
+ do {
+ /* the RTCL register wraps at 1000000000 */
+ diff = get_rtcl() - start;
+ if (diff < 0)
+ diff += 1000000000;
+ } while (diff < loops);
+ } else {
+ start = get_tbl();
+ while (get_tbl() - start < loops)
+ HMT_low();
+ HMT_medium();
+ }
+}
+EXPORT_SYMBOL(__delay);
+
+void udelay(unsigned long usecs)
+{
+ __delay(tb_ticks_per_usec * usecs);
+}
+EXPORT_SYMBOL(udelay);
+
static __inline__ void timer_check_rtc(void)
{
/*
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 4099ddab9205ce6b32ed61f47e950a047c5e76b9..dda5f2c72c256f5e73e05de80eb4833bcc4d3f5a 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -257,6 +257,13 @@ void __init chrp_setup_arch(void)
if (rtas_token("display-character") >= 0)
ppc_md.progress = rtas_progress;
+ /* use RTAS time-of-day routines if available */
+ if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
+ ppc_md.get_boot_time = rtas_get_boot_time;
+ ppc_md.get_rtc_time = rtas_get_rtc_time;
+ ppc_md.set_rtc_time = rtas_set_rtc_time;
+ }
+
#ifdef CONFIG_BOOTX_TEXT
if (ppc_md.progress == NULL && boot_text_mapped)
ppc_md.progress = btext_progress;
@@ -505,9 +512,11 @@ void __init chrp_init(void)
ppc_md.halt = rtas_halt;
ppc_md.time_init = chrp_time_init;
+ ppc_md.calibrate_decr = chrp_calibrate_decr;
+
+ /* this may get overridden with rtas routines later... */
ppc_md.set_rtc_time = chrp_set_rtc_time;
ppc_md.get_rtc_time = chrp_get_rtc_time;
- ppc_md.calibrate_decr = chrp_calibrate_decr;
#ifdef CONFIG_SMP
smp_ops = &chrp_smp_ops;
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index bb2315997d4560363b2d9bf0a7f8340afb3bd328..b616053bc33119d5a3b6e3523824483f7fe3aea1 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -34,6 +34,7 @@
#include <asm/machdep.h>
#include <asm/smp.h>
#include <asm/mpic.h>
+#include <asm/rtas.h>
static void __devinit smp_chrp_kick_cpu(int nr)
{
diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c
index 9e53535ddb82b580f48d83043f57f8a151a13731..737ee5d9f0aad5cdbbfd4746af9d39aae43aafb4 100644
--- a/arch/powerpc/platforms/chrp/time.c
+++ b/arch/powerpc/platforms/chrp/time.c
@@ -87,7 +87,6 @@ int chrp_set_rtc_time(struct rtc_time *tmarg)
chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
- tm.tm_year -= 1900;
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
BIN_TO_BCD(tm.tm_sec);
BIN_TO_BCD(tm.tm_min);
@@ -156,7 +155,7 @@ void chrp_get_rtc_time(struct rtc_time *tm)
BCD_TO_BIN(mon);
BCD_TO_BIN(year);
}
- if ((year += 1900) < 1970)
+ if (year < 70)
year += 100;
tm->tm_sec = sec;
tm->tm_min = min;
diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c
index 40fc07a8e6061165bb8a2037009a0065b0595c15..15846cc938acd4a87158a47b19ba547f5af062d5 100644
--- a/arch/powerpc/platforms/maple/time.c
+++ b/arch/powerpc/platforms/maple/time.c
@@ -158,6 +158,11 @@ int maple_set_rtc_time(struct rtc_time *tm)
return 0;
}
+static struct resource rtc_iores = {
+ .name = "rtc",
+ .flags = IORESOURCE_BUSY,
+};
+
unsigned long __init maple_get_boot_time(void)
{
struct rtc_time tm;
@@ -172,7 +177,11 @@ unsigned long __init maple_get_boot_time(void)
printk(KERN_INFO "Maple: No device node for RTC, assuming "
"legacy address (0x%x)\n", maple_rtc_addr);
}
-
+
+ rtc_iores.start = maple_rtc_addr;
+ rtc_iores.end = maple_rtc_addr + 7;
+ request_resource(&ioport_resource, &rtc_iores);
+
maple_get_rtc_time(&tm);
return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 79de2310e70b86eb050eae59e45e3a10dd933337..c8d2a40dc5b48ceb6038b3f9fcbc8bc036850efa 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -86,7 +86,8 @@ static int ibm_read_slot_reset_state;
static int ibm_read_slot_reset_state2;
static int ibm_slot_error_detail;
-static int eeh_subsystem_enabled;
+int eeh_subsystem_enabled;
+EXPORT_SYMBOL(eeh_subsystem_enabled);
/* Lock to avoid races due to multiple reports of an error */
static DEFINE_SPINLOCK(confirm_error_lock);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index b9d9732b2e0668fc06f797590d893ee76eb7416c..4a465f067ede53b64481574092f8bc7fe4c4735c 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -504,7 +504,7 @@ static void pseries_dedicated_idle(void)
lpaca->lppaca.idle = 1;
if (!need_resched()) {
- start_snooze = __get_tb() +
+ start_snooze = get_tb() +
*smt_snooze_delay * tb_ticks_per_usec;
while (!need_resched() && !cpu_is_offline(cpu)) {
@@ -518,7 +518,7 @@ static void pseries_dedicated_idle(void)
HMT_very_low();
if (*smt_snooze_delay != 0 &&
- __get_tb() > start_snooze) {
+ get_tb() > start_snooze) {
HMT_medium();
dedicated_idle_sleep(cpu);
}
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index 17a4da65e275f99930ca6664a89ab28424f919cd..0bb23fce42935e6e51e826cdfd991449b3cdadfa 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -13,7 +13,7 @@ extra-$(CONFIG_POWER4) += idle_power4.o
extra-y += vmlinux.lds
obj-y := entry.o traps.o idle.o time.o misc.o \
- process.o align.o \
+ process.o \
setup.o \
ppc_htab.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
@@ -38,7 +38,7 @@ endif
# These are here while we do the architecture merge
else
-obj-y := idle.o align.o
+obj-y := idle.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/ppc/kernel/align.c b/arch/ppc/kernel/align.c
deleted file mode 100644
index ab398c4b70b68f42afaba8e20b70d6d1adcbbe8c..0000000000000000000000000000000000000000
--- a/arch/ppc/kernel/align.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * align.c - handle alignment exceptions for the Power PC.
- *
- * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- * Copyright (c) 1998-1999 TiVo, Inc.
- * PowerPC 403GCX modifications.
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- * PowerPC 403GCX/405GP modifications.
- */
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/cache.h>
-
-struct aligninfo {
- unsigned char len;
- unsigned char flags;
-};
-
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
-#define OPCD(inst) (((inst) & 0xFC000000) >> 26)
-#define RS(inst) (((inst) & 0x03E00000) >> 21)
-#define RA(inst) (((inst) & 0x001F0000) >> 16)
-#define IS_XFORM(code) ((code) == 31)
-#endif
-
-#define INVALID { 0, 0 }
-
-#define LD 1 /* load */
-#define ST 2 /* store */
-#define SE 4 /* sign-extend value */
-#define F 8 /* to/from fp regs */
-#define U 0x10 /* update index register */
-#define M 0x20 /* multiple load/store */
-#define S 0x40 /* single-precision fp, or byte-swap value */
-#define SX 0x40 /* byte count in XER */
-#define HARD 0x80 /* string, stwcx. */
-
-#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */
-
-/*
- * The PowerPC stores certain bits of the instruction that caused the
- * alignment exception in the DSISR register. This array maps those
- * bits to information about the operand length and what the
- * instruction would do.
- */
-static struct aligninfo aligninfo[128] = {
- { 4, LD }, /* 00 0 0000: lwz / lwarx */
- INVALID, /* 00 0 0001 */
- { 4, ST }, /* 00 0 0010: stw */
- INVALID, /* 00 0 0011 */
- { 2, LD }, /* 00 0 0100: lhz */
- { 2, LD+SE }, /* 00 0 0101: lha */
- { 2, ST }, /* 00 0 0110: sth */
- { 4, LD+M }, /* 00 0 0111: lmw */
- { 4, LD+F+S }, /* 00 0 1000: lfs */
- { 8, LD+F }, /* 00 0 1001: lfd */
- { 4, ST+F+S }, /* 00 0 1010: stfs */
- { 8, ST+F }, /* 00 0 1011: stfd */
- INVALID, /* 00 0 1100 */
- INVALID, /* 00 0 1101: ld/ldu/lwa */
- INVALID, /* 00 0 1110 */
- INVALID, /* 00 0 1111: std/stdu */
- { 4, LD+U }, /* 00 1 0000: lwzu */
- INVALID, /* 00 1 0001 */
- { 4, ST+U }, /* 00 1 0010: stwu */
- INVALID, /* 00 1 0011 */
- { 2, LD+U }, /* 00 1 0100: lhzu */
- { 2, LD+SE+U }, /* 00 1 0101: lhau */
- { 2, ST+U }, /* 00 1 0110: sthu */
- { 4, ST+M }, /* 00 1 0111: stmw */
- { 4, LD+F+S+U }, /* 00 1 1000: lfsu */
- { 8, LD+F+U }, /* 00 1 1001: lfdu */
- { 4, ST+F+S+U }, /* 00 1 1010: stfsu */
- { 8, ST+F+U }, /* 00 1 1011: stfdu */
- INVALID, /* 00 1 1100 */
- INVALID, /* 00 1 1101 */
- INVALID, /* 00 1 1110 */
- INVALID, /* 00 1 1111 */
- INVALID, /* 01 0 0000: ldx */
- INVALID, /* 01 0 0001 */
- INVALID, /* 01 0 0010: stdx */
- INVALID, /* 01 0 0011 */
- INVALID, /* 01 0 0100 */
- INVALID, /* 01 0 0101: lwax */
- INVALID, /* 01 0 0110 */
- INVALID, /* 01 0 0111 */
- { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */
- { 4, LD+M+HARD }, /* 01 0 1001: lswi */
- { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */
- { 4, ST+M+HARD }, /* 01 0 1011: stswi */
- INVALID, /* 01 0 1100 */
- INVALID, /* 01 0 1101 */
- INVALID, /* 01 0 1110 */
- INVALID, /* 01 0 1111 */
- INVALID, /* 01 1 0000: ldux */
- INVALID, /* 01 1 0001 */
- INVALID, /* 01 1 0010: stdux */
- INVALID, /* 01 1 0011 */
- INVALID, /* 01 1 0100 */
- INVALID, /* 01 1 0101: lwaux */
- INVALID, /* 01 1 0110 */
- INVALID, /* 01 1 0111 */
- INVALID, /* 01 1 1000 */
- INVALID, /* 01 1 1001 */
- INVALID, /* 01 1 1010 */
- INVALID, /* 01 1 1011 */
- INVALID, /* 01 1 1100 */
- INVALID, /* 01 1 1101 */
- INVALID, /* 01 1 1110 */
- INVALID, /* 01 1 1111 */
- INVALID, /* 10 0 0000 */
- INVALID, /* 10 0 0001 */
- { 0, ST+HARD }, /* 10 0 0010: stwcx. */
- INVALID, /* 10 0 0011 */
- INVALID, /* 10 0 0100 */
- INVALID, /* 10 0 0101 */
- INVALID, /* 10 0 0110 */
- INVALID, /* 10 0 0111 */
- { 4, LD+S }, /* 10 0 1000: lwbrx */
- INVALID, /* 10 0 1001 */
- { 4, ST+S }, /* 10 0 1010: stwbrx */
- INVALID, /* 10 0 1011 */
- { 2, LD+S }, /* 10 0 1100: lhbrx */
- INVALID, /* 10 0 1101 */
- { 2, ST+S }, /* 10 0 1110: sthbrx */
- INVALID, /* 10 0 1111 */
- INVALID, /* 10 1 0000 */
- INVALID, /* 10 1 0001 */
- INVALID, /* 10 1 0010 */
- INVALID, /* 10 1 0011 */
- INVALID, /* 10 1 0100 */
- INVALID, /* 10 1 0101 */
- INVALID, /* 10 1 0110 */
- INVALID, /* 10 1 0111 */
- INVALID, /* 10 1 1000 */
- INVALID, /* 10 1 1001 */
- INVALID, /* 10 1 1010 */
- INVALID, /* 10 1 1011 */
- INVALID, /* 10 1 1100 */
- INVALID, /* 10 1 1101 */
- INVALID, /* 10 1 1110 */
- { 0, ST+HARD }, /* 10 1 1111: dcbz */
- { 4, LD }, /* 11 0 0000: lwzx */
- INVALID, /* 11 0 0001 */
- { 4, ST }, /* 11 0 0010: stwx */
- INVALID, /* 11 0 0011 */
- { 2, LD }, /* 11 0 0100: lhzx */
- { 2, LD+SE }, /* 11 0 0101: lhax */
- { 2, ST }, /* 11 0 0110: sthx */
- INVALID, /* 11 0 0111 */
- { 4, LD+F+S }, /* 11 0 1000: lfsx */
- { 8, LD+F }, /* 11 0 1001: lfdx */
- { 4, ST+F+S }, /* 11 0 1010: stfsx */
- { 8, ST+F }, /* 11 0 1011: stfdx */
- INVALID, /* 11 0 1100 */
- INVALID, /* 11 0 1101: lmd */
- INVALID, /* 11 0 1110 */
- INVALID, /* 11 0 1111: stmd */
- { 4, LD+U }, /* 11 1 0000: lwzux */
- INVALID, /* 11 1 0001 */
- { 4, ST+U }, /* 11 1 0010: stwux */
- INVALID, /* 11 1 0011 */
- { 2, LD+U }, /* 11 1 0100: lhzux */
- { 2, LD+SE+U }, /* 11 1 0101: lhaux */
- { 2, ST+U }, /* 11 1 0110: sthux */
- INVALID, /* 11 1 0111 */
- { 4, LD+F+S+U }, /* 11 1 1000: lfsux */
- { 8, LD+F+U }, /* 11 1 1001: lfdux */
- { 4, ST+F+S+U }, /* 11 1 1010: stfsux */
- { 8, ST+F+U }, /* 11 1 1011: stfdux */
- INVALID, /* 11 1 1100 */
- INVALID, /* 11 1 1101 */
- INVALID, /* 11 1 1110 */
- INVALID, /* 11 1 1111 */
-};
-
-#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
-
-int
-fix_alignment(struct pt_regs *regs)
-{
- int instr, nb, flags;
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
- int opcode, f1, f2, f3;
-#endif
- int i, t;
- int reg, areg;
- int offset, nb0;
- unsigned char __user *addr;
- unsigned char *rptr;
- union {
- long l;
- float f;
- double d;
- unsigned char v[8];
- } data;
-
- CHECK_FULL_REGS(regs);
-
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
- /* The 4xx-family & Book-E processors have no DSISR register,
- * so we emulate it.
- * The POWER4 has a DSISR register but doesn't set it on
- * an alignment fault. -- paulus
- */
-
- if (__get_user(instr, (unsigned int __user *) regs->nip))
- return 0;
- opcode = OPCD(instr);
- reg = RS(instr);
- areg = RA(instr);
-
- if (!IS_XFORM(opcode)) {
- f1 = 0;
- f2 = (instr & 0x04000000) >> 26;
- f3 = (instr & 0x78000000) >> 27;
- } else {
- f1 = (instr & 0x00000006) >> 1;
- f2 = (instr & 0x00000040) >> 6;
- f3 = (instr & 0x00000780) >> 7;
- }
-
- instr = ((f1 << 5) | (f2 << 4) | f3);
-#else
- reg = (regs->dsisr >> 5) & 0x1f; /* source/dest register */
- areg = regs->dsisr & 0x1f; /* register to update */
- instr = (regs->dsisr >> 10) & 0x7f;
-#endif
-
- nb = aligninfo[instr].len;
- if (nb == 0) {
- long __user *p;
- int i;
-
- if (instr != DCBZ)
- return 0; /* too hard or invalid instruction */
- /*
- * The dcbz (data cache block zero) instruction
- * gives an alignment fault if used on non-cacheable
- * memory. We handle the fault mainly for the
- * case when we are running with the cache disabled
- * for debugging.
- */
- p = (long __user *) (regs->dar & -L1_CACHE_BYTES);
- if (user_mode(regs)
- && !access_ok(VERIFY_WRITE, p, L1_CACHE_BYTES))
- return -EFAULT;
- for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
- if (__put_user(0, p+i))
- return -EFAULT;
- return 1;
- }
-
- flags = aligninfo[instr].flags;
- if ((flags & (LD|ST)) == 0)
- return 0;
-
- /* For the 4xx-family & Book-E processors, the 'dar' field of the
- * pt_regs structure is overloaded and is really from the DEAR.
- */
-
- addr = (unsigned char __user *)regs->dar;
-
- if (flags & M) {
- /* lmw, stmw, lswi/x, stswi/x */
- nb0 = 0;
- if (flags & HARD) {
- if (flags & SX) {
- nb = regs->xer & 127;
- if (nb == 0)
- return 1;
- } else {
- if (__get_user(instr,
- (unsigned int __user *)regs->nip))
- return 0;
- nb = (instr >> 11) & 0x1f;
- if (nb == 0)
- nb = 32;
- }
- if (nb + reg * 4 > 128) {
- nb0 = nb + reg * 4 - 128;
- nb = 128 - reg * 4;
- }
- } else {
- /* lwm, stmw */
- nb = (32 - reg) * 4;
- }
-
- if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
- return -EFAULT; /* bad address */
-
- rptr = (unsigned char *) ®s->gpr[reg];
- if (flags & LD) {
- for (i = 0; i < nb; ++i)
- if (__get_user(rptr[i], addr+i))
- return -EFAULT;
- if (nb0 > 0) {
- rptr = (unsigned char *) ®s->gpr[0];
- addr += nb;
- for (i = 0; i < nb0; ++i)
- if (__get_user(rptr[i], addr+i))
- return -EFAULT;
- }
- for (; (i & 3) != 0; ++i)
- rptr[i] = 0;
- } else {
- for (i = 0; i < nb; ++i)
- if (__put_user(rptr[i], addr+i))
- return -EFAULT;
- if (nb0 > 0) {
- rptr = (unsigned char *) ®s->gpr[0];
- addr += nb;
- for (i = 0; i < nb0; ++i)
- if (__put_user(rptr[i], addr+i))
- return -EFAULT;
- }
- }
- return 1;
- }
-
- offset = 0;
- if (nb < 4) {
- /* read/write the least significant bits */
- data.l = 0;
- offset = 4 - nb;
- }
-
- /* Verify the address of the operand */
- if (user_mode(regs)) {
- if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
- return -EFAULT; /* bad address */
- }
-
- if (flags & F) {
- preempt_disable();
- if (regs->msr & MSR_FP)
- giveup_fpu(current);
- preempt_enable();
- }
-
- /* If we read the operand, copy it in, else get register values */
- if (flags & LD) {
- for (i = 0; i < nb; ++i)
- if (__get_user(data.v[offset+i], addr+i))
- return -EFAULT;
- } else if (flags & F) {
- data.d = current->thread.fpr[reg];
- } else {
- data.l = regs->gpr[reg];
- }
-
- switch (flags & ~U) {
- case LD+SE: /* sign extend */
- if (data.v[2] >= 0x80)
- data.v[0] = data.v[1] = -1;
- break;
-
- case LD+S: /* byte-swap */
- case ST+S:
- if (nb == 2) {
- SWAP(data.v[2], data.v[3]);
- } else {
- SWAP(data.v[0], data.v[3]);
- SWAP(data.v[1], data.v[2]);
- }
- break;
-
- /* Single-precision FP load and store require conversions... */
- case LD+F+S:
-#ifdef CONFIG_PPC_FPU
- preempt_disable();
- enable_kernel_fp();
- cvt_fd(&data.f, &data.d, ¤t->thread);
- preempt_enable();
-#else
- return 0;
-#endif
- break;
- case ST+F+S:
-#ifdef CONFIG_PPC_FPU
- preempt_disable();
- enable_kernel_fp();
- cvt_df(&data.d, &data.f, ¤t->thread);
- preempt_enable();
-#else
- return 0;
-#endif
- break;
- }
-
- if (flags & ST) {
- for (i = 0; i < nb; ++i)
- if (__put_user(data.v[offset+i], addr+i))
- return -EFAULT;
- } else if (flags & F) {
- current->thread.fpr[reg] = data.d;
- } else {
- regs->gpr[reg] = data.l;
- }
-
- if (flags & U)
- regs->gpr[areg] = regs->dar;
-
- return 1;
-}
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 48ed58f995c06e56595d5859aa364421faa86575..f7fae5f153b2b55a7aff720947f76255bcc69179 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -45,7 +45,6 @@ static void update_bridge_base(struct pci_bus *bus, int i);
static void pcibios_fixup_resources(struct pci_dev* dev);
static void fixup_broken_pcnet32(struct pci_dev* dev);
static int reparent_resources(struct resource *parent, struct resource *res);
-static void fixup_rev1_53c810(struct pci_dev* dev);
static void fixup_cpc710_pci64(struct pci_dev* dev);
#ifdef CONFIG_PPC_OF
static u8* pci_to_OF_bus_map;
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
index 7b26bcc5d10d146cebc3befa7eefe600bf0fdde8..198a6a02cde83b8889ad98b639172e51b2a2a21b 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
+++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
@@ -25,6 +25,8 @@
#define BCSR_ADDR ((uint)0xf8000000)
#define BCSR_SIZE ((uint)(32 * 1024))
+struct seq_file;
+
extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m);
extern void mpc85xx_ads_init_IRQ(void) __init;
extern void mpc85xx_ads_map_io(void) __init;
diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h
index 7bcc6c35a417eda482c0434332aa82db1084d63d..2f25b51951520ea560f18c5ec74173dc3b1c8c5e 100644
--- a/arch/ppc/platforms/85xx/stx_gp3.h
+++ b/arch/ppc/platforms/85xx/stx_gp3.h
@@ -21,7 +21,6 @@
#include <linux/config.h>
#include <linux/init.h>
-#include <linux/seq_file.h>
#include <asm/ppcboot.h>
#define BOARD_CCSRBAR ((uint)0xe0000000)
@@ -43,7 +42,6 @@ extern void mpc85xx_setup_hose(void) __init;
extern void mpc85xx_restart(char *cmd);
extern void mpc85xx_power_off(void);
extern void mpc85xx_halt(void);
-extern int mpc85xx_show_cpuinfo(struct seq_file *m);
extern void mpc85xx_init_IRQ(void) __init;
extern unsigned long mpc85xx_find_end_of_memory(void) __init;
extern void mpc85xx_calibrate_decr(void) __init;
diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c
index a1523989aff4dfed46b9021aeb99e5cc235325d0..82cf3ab77f4a67b08e2c108bdfd28cf94769287a 100644
--- a/arch/ppc/syslib/mpc83xx_sys.c
+++ b/arch/ppc/syslib/mpc83xx_sys.c
@@ -69,9 +69,33 @@ struct ppc_sys_spec ppc_sys_specs[] = {
},
},
{
- .ppc_sys_name = "8343E",
+ .ppc_sys_name = "8347E",
.mask = 0xFFFF0000,
.value = 0x80540000,
+ .num_devices = 9,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+ MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
+ MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
+ },
+ },
+ {
+ .ppc_sys_name = "8347",
+ .mask = 0xFFFF0000,
+ .value = 0x80550000,
+ .num_devices = 8,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+ MPC83xx_IIC2, MPC83xx_DUART,
+ MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
+ },
+ },
+ {
+ .ppc_sys_name = "8343E",
+ .mask = 0xFFFF0000,
+ .value = 0x80560000,
.num_devices = 8,
.device_list = (enum ppc_sys_devices[])
{
@@ -83,7 +107,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
{
.ppc_sys_name = "8343",
.mask = 0xFFFF0000,
- .value = 0x80550000,
+ .value = 0x80570000,
.num_devices = 7,
.device_list = (enum ppc_sys_devices[])
{
diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug
deleted file mode 100644
index b258c9314a1bda2b2bdf4f6e962e600a0ce206ba..0000000000000000000000000000000000000000
--- a/arch/ppc64/Kconfig.debug
+++ /dev/null
@@ -1,65 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config DEBUG_STACKOVERFLOW
- bool "Check for stack overflows"
- depends on DEBUG_KERNEL
- help
- This option will cause messages to be printed if free stack space
- drops below a certain limit.
-
-config KPROBES
- bool "Kprobes"
- depends on DEBUG_KERNEL
- help
- Kprobes allows you to trap at almost any kernel address and
- execute a callback function. register_kprobe() establishes
- a probepoint and specifies the callback. Kprobes is useful
- for kernel debugging, non-intrusive instrumentation and testing.
- If in doubt, say "N".
-
-config DEBUG_STACK_USAGE
- bool "Stack utilization instrumentation"
- depends on DEBUG_KERNEL
- help
- Enables the display of the minimum amount of free stack which each
- task has ever had available in the sysrq-T and sysrq-P debug output.
-
- This option will slow down process creation somewhat.
-
-config DEBUGGER
- bool "Enable debugger hooks"
- depends on DEBUG_KERNEL
- help
- Include in-kernel hooks for kernel debuggers. Unless you are
- intending to debug the kernel, say N here.
-
-config XMON
- bool "Include xmon kernel debugger"
- depends on DEBUGGER && !PPC_ISERIES
- help
- Include in-kernel hooks for the xmon kernel monitor/debugger.
- Unless you are intending to debug the kernel, say N here.
- Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise
- nothing will appear on the screen (xmon writes directly to the
- framebuffer memory).
- The cmdline option 'xmon' or 'xmon=early' will drop into xmon very
- early during boot. 'xmon=on' will just enable the xmon debugger hooks.
- 'xmon=off' will disable the debugger hooks if CONFIG_XMON_DEFAULT is set.
-
-config XMON_DEFAULT
- bool "Enable xmon by default"
- depends on XMON
- help
- xmon is normally disabled unless booted with 'xmon=on'.
- Use 'xmon=off' to disable xmon init during runtime.
-
-config IRQSTACKS
- bool "Use separate kernel stacks when processing interrupts"
- help
- If you say Y here the kernel will use separate kernel stacks
- for handling hard and soft interrupts. This can help avoid
- overflowing the process kernel stacks.
-
-endmenu
diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile
deleted file mode 100644
index a55a82d145d4c14a8a0f5c5d30a92e218b26d4fd..0000000000000000000000000000000000000000
--- a/arch/ppc64/Makefile
+++ /dev/null
@@ -1,142 +0,0 @@
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-# Changes for PPC by Gary Thomas
-# Rewritten by Cort Dougan and Paul Mackerras
-# Adjusted for PPC64 by Tom Gall
-#
-
-KERNELLOAD := 0xc000000000000000
-
-# Set default 32 bits cross compilers for vdso and boot wrapper
-CROSS32_COMPILE ?=
-
-CROSS32CC := $(CROSS32_COMPILE)gcc
-CROSS32AS := $(CROSS32_COMPILE)as
-CROSS32LD := $(CROSS32_COMPILE)ld
-CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy
-
-# If we have a biarch compiler, use it for 32 bits cross compile if
-# CROSS32_COMPILE wasn't explicitely defined, and add proper explicit
-# target type to target compilers
-
-HAS_BIARCH := $(call cc-option-yn, -m64)
-ifeq ($(HAS_BIARCH),y)
-ifeq ($(CROSS32_COMPILE),)
-CROSS32CC := $(CC) -m32
-CROSS32AS := $(AS) -a32
-CROSS32LD := $(LD) -m elf32ppc
-CROSS32OBJCOPY := $(OBJCOPY)
-endif
-override AS += -a64
-override LD += -m elf64ppc
-override CC += -m64
-endif
-
-export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
-
-new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
-
-ifeq ($(new_nm),y)
-NM := $(NM) --synthetic
-
-endif
-
-CHECKFLAGS += -m64 -D__powerpc__ -D__powerpc64__
-
-LDFLAGS := -m elf64ppc
-LDFLAGS_vmlinux := -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD)
-CFLAGS += -msoft-float -pipe -mminimal-toc -mtraceback=none \
- -mcall-aixdesc
-# Temporary hack until we have migrated to asm-powerpc
-CPPFLAGS += -Iarch/$(ARCH)/include
-
-GCC_VERSION := $(call cc-version)
-GCC_BROKEN_VEC := $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;)
-
-ifeq ($(CONFIG_POWER4_ONLY),y)
-ifeq ($(CONFIG_ALTIVEC),y)
-ifeq ($(GCC_BROKEN_VEC),y)
- CFLAGS += $(call cc-option,-mcpu=970)
-else
- CFLAGS += $(call cc-option,-mcpu=power4)
-endif
-else
- CFLAGS += $(call cc-option,-mcpu=power4)
-endif
-else
- CFLAGS += $(call cc-option,-mtune=power4)
-endif
-
-# No AltiVec instruction when building kernel
-CFLAGS += $(call cc-option, -mno-altivec)
-
-# Enable unit-at-a-time mode when possible. It shrinks the
-# kernel considerably.
-CFLAGS += $(call cc-option,-funit-at-a-time)
-
-head-y := arch/ppc64/kernel/head.o
-head-y += arch/powerpc/kernel/fpu.o
-head-y += arch/powerpc/kernel/entry_64.o
-
-core-y += arch/ppc64/kernel/ arch/powerpc/kernel/
-core-y += arch/powerpc/mm/
-core-y += arch/powerpc/sysdev/
-core-y += arch/powerpc/platforms/
-core-y += arch/powerpc/lib/
-core-$(CONFIG_XMON) += arch/powerpc/xmon/
-drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
-
-boot := arch/ppc64/boot
-
-boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd
-boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode
-boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd
-boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm
-boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd
-$(boottargets-y): vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_PMAC) := vmlinux
-bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_BPA) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_ISERIES) := vmlinux
-BOOTIMAGE := $(bootimage-y)
-install: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
-
-defaultimage-$(CONFIG_PPC_PSERIES) := zImage
-defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode
-defaultimage-$(CONFIG_PPC_MAPLE) := zImage
-defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
-KBUILD_IMAGE := $(defaultimage-y)
-all: $(KBUILD_IMAGE)
-
-archclean:
- $(Q)$(MAKE) $(clean)=$(boot)
- # Temporary hack until we have migrated to asm-powerpc
- $(Q)rm -rf arch/$(ARCH)/include
-
-
-# Temporary hack until we have migrated to asm-powerpc
-include/asm: arch/$(ARCH)/include/asm
-arch/$(ARCH)/include/asm:
- $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
- $(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm
-
-define archhelp
- echo ' zImage.vmode - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)'
- echo ' zImage.initrd.vmode - Compressed kernel image with initrd attached,'
- echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz'
- echo ' (arch/$(ARCH)/boot/zImage.initrd.vmode)'
- echo ' zImage - zImage for pSeries machines'
- echo ' zImage.initrd - zImage with initrd for pSeries machines'
-endef
diff --git a/arch/ppc64/configs/bpa_defconfig b/arch/ppc64/configs/bpa_defconfig
deleted file mode 100644
index 67ffecbc05cb5cff6268eeed331bf2f150bfb863..0000000000000000000000000000000000000000
--- a/arch/ppc64/configs/bpa_defconfig
+++ /dev/null
@@ -1,1024 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:29:10 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_PSERIES is not set
-CONFIG_PPC_BPA=y
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_BPA_IIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
-# CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
-# CONFIG_IOMMU_VMERGE is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=y
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_AEC62XX=y
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SIIMAGE=y
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-CONFIG_SKGE=m
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_SPIDER_NET is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WATCHDOG_RTAS=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUGGER=y
-# CONFIG_XMON is not set
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig
deleted file mode 100644
index 6323065fbf2ce0d71692bb24ba117923fb1a3ede..0000000000000000000000000000000000000000
--- a/arch/ppc64/configs/g5_defconfig
+++ /dev/null
@@ -1,1392 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:30:23 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
-CONFIG_U3_DART=y
-CONFIG_PPC_PMAC64=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-CONFIG_SCSI_SATA_SVW=y
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_IEEE1394_OUI_DB=y
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-# CONFIG_IEEE1394_EXPORT_FULL_API is not set
-
-#
-# Device Drivers
-#
-# CONFIG_IEEE1394_PCILYNX is not set
-CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=y
-# CONFIG_IEEE1394_CMP is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-CONFIG_ADB_PMU=y
-CONFIG_PMAC_SMU=y
-CONFIG_THERM_PM72=y
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-CONFIG_SUNGEM=y
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=y
-CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-CONFIG_TIGON3=m
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_IBMOL=y
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_PMACZILOG is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_AGP_UNINORTH=m
-# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_KEYWEST=y
-CONFIG_I2C_PMAC_SMU=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-CONFIG_FB_RIVA=y
-# CONFIG_FB_RIVA_I2C is not set
-# CONFIG_FB_RIVA_DEBUG is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-CONFIG_HID_FF=y
-CONFIG_HID_PID=y
-CONFIG_LOGITECH_FF=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig
deleted file mode 100644
index 62e92c7e9e27aa7fbc9e8f4ea59ce4a5fac64cf7..0000000000000000000000000000000000000000
--- a/arch/ppc64/configs/iSeries_defconfig
+++ /dev/null
@@ -1,998 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:30:56 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-CONFIG_PPC_ISERIES=y
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_IBMVIO=y
-# CONFIG_POWER4_ONLY is not set
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-CONFIG_SCSI_IBMVSCSI=m
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_IBMOL=y
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_ISERIES_VETH=y
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_RX=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
-CONFIG_SERIAL_ICOM=m
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# iSeries device drivers
-#
-CONFIG_VIOCONS=y
-CONFIG_VIODASD=y
-CONFIG_VIOCD=m
-CONFIG_VIOTAPE=m
-CONFIG_VIOPATH=y
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
-CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig
deleted file mode 100644
index 7b480f3d140630689540701d35492786d94ac13f..0000000000000000000000000000000000000000
--- a/arch/ppc64/configs/maple_defconfig
+++ /dev/null
@@ -1,1062 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:31:24 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_MAPLE=y
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-# CONFIG_ALTIVEC is not set
-CONFIG_KEXEC=y
-CONFIG_U3_DART=y
-CONFIG_MPIC_BROKEN_U3=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_IDE_TASK_IOCTL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-CONFIG_AMD8111_ETH=y
-# CONFIG_AMD8111E_NAPI is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-CONFIG_I2C_AMD8111=y
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_TI=m
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf-8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUGGER=y
-CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
-# CONFIG_IRQSTACKS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig
deleted file mode 100644
index 9f09dff9e11a5c5c2f0fc130985103d00cb5e4a1..0000000000000000000000000000000000000000
--- a/arch/ppc64/configs/pSeries_defconfig
+++ /dev/null
@@ -1,1371 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:32:17 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CPUSETS=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_PPC_PSERIES=y
-# CONFIG_PPC_BPA is not set
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_XICS=y
-CONFIG_MPIC=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_SPLPAR=y
-CONFIG_KEXEC=y
-CONFIG_IBMVIO=y
-# CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=128
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-CONFIG_NUMA=y
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_EEH=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=m
-CONFIG_SCANLOG=m
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-CONFIG_HOTPLUG_PCI=m
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_PCI_RPA=m
-CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_NETLINK=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-CONFIG_SCSI_IBMVSCSI=y
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-CONFIG_SCSI_IPR=y
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA24XX=m
-CONFIG_SCSI_LPFC=m
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBMVETH=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=y
-CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
-# CONFIG_2BUFF_MODE is not set
-
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_IBMOL=y
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_RX=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_ICOM=m
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-CONFIG_HVC_CONSOLE=y
-CONFIG_HVCS=m
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=1024
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
-CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUGGER=y
-CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile
deleted file mode 100644
index e876c213f5ce5a1f59da331db1eee68db9b5c5dc..0000000000000000000000000000000000000000
--- a/arch/ppc64/kernel/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the linux ppc64 kernel.
-#
-
-obj-y += idle.o align.o
-
-obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 573b6a97bb1f9276f79ad3090c67027047a7549b..70d8a6ec0920f1589525395a1550360a26cbd54f 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -514,8 +514,6 @@ static int acpi_processor_set_power_policy(struct acpi_processor *pr)
static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
{
- int i;
-
ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_fadt");
if (!pr)
@@ -524,8 +522,7 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
if (!pr->pblk)
return_VALUE(-ENODEV);
- for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
- memset(pr->power.states, 0, sizeof(struct acpi_processor_cx));
+ memset(pr->power.states, 0, sizeof(pr->power.states));
/* if info is obtained from pblk/fadt, type equals state */
pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
@@ -555,13 +552,9 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
static int acpi_processor_get_power_info_default_c1(struct acpi_processor *pr)
{
- int i;
-
ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1");
- for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
- memset(&(pr->power.states[i]), 0,
- sizeof(struct acpi_processor_cx));
+ memset(pr->power.states, 0, sizeof(pr->power.states));
/* if info is obtained from pblk/fadt, type equals state */
pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
@@ -873,7 +866,8 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr)
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
if (pr->power.states[i].valid) {
pr->power.count = i;
- pr->flags.power = 1;
+ if (pr->power.states[i].type >= ACPI_STATE_C2)
+ pr->flags.power = 1;
}
}
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index ea89dca3dbb58f16b057ea9878173059b6611e6b..01a1f6badb53e428c00dbdb7b4e3190513d48e8e 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2203,7 +2203,7 @@ static void setup_xaction_handlers(struct smi_info *smi_info)
static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
{
- if (smi_info->thread != ERR_PTR(-ENOMEM))
+ if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM))
kthread_stop(smi_info->thread);
del_timer_sync(&smi_info->si_timer);
}
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index b58adfe3ed191e039888ac21bf9b57fd7db4ed23..a6873bf89ffad63c6196dacc9f3499dcb6c22387 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -6,7 +6,7 @@ menu "TPM devices"
config TCG_TPM
tristate "TPM Hardware Support"
- depends on EXPERIMENTAL && PCI
+ depends on EXPERIMENTAL
---help---
If you have a TPM security chip in your system, which
implements the Trusted Computing Group's specification,
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 0b283d246730b051afcc2c4d1ce76f5e1f0deb78..a9be0e8eaea5dedc243af90cedb18d645537d612 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -377,6 +377,7 @@ int tpm_release(struct inode *inode, struct file *file)
file->private_data = NULL;
chip->num_opens--;
del_singleshot_timer_sync(&chip->user_read_timer);
+ flush_scheduled_work();
atomic_set(&chip->data_pending, 0);
put_device(chip->dev);
kfree(chip->data_buffer);
@@ -428,6 +429,7 @@ ssize_t tpm_read(struct file * file, char __user *buf,
int ret_size;
del_singleshot_timer_sync(&chip->user_read_timer);
+ flush_scheduled_work();
ret_size = atomic_read(&chip->data_pending);
atomic_set(&chip->data_pending, 0);
if (ret_size > 0) { /* relay data */
diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
index deb4b5c80914a0311ea613b87ba20b32a36071d3..ff3654964fe32e24ef45185f0c7e01ea3aa222c4 100644
--- a/drivers/char/tpm/tpm_atmel.c
+++ b/drivers/char/tpm/tpm_atmel.c
@@ -47,13 +47,12 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
return -EIO;
for (i = 0; i < 6; i++) {
- status = atmel_getb(chip, 1);
+ status = ioread8(chip->vendor->iobase + 1);
if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
- dev_err(chip->dev,
- "error reading header\n");
+ dev_err(chip->dev, "error reading header\n");
return -EIO;
}
- *buf++ = atmel_getb(chip, 0);
+ *buf++ = ioread8(chip->vendor->iobase);
}
/* size of the data received */
@@ -64,10 +63,9 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
dev_err(chip->dev,
"Recv size(%d) less than available space\n", size);
for (; i < size; i++) { /* clear the waiting data anyway */
- status = atmel_getb(chip, 1);
+ status = ioread8(chip->vendor->iobase + 1);
if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
- dev_err(chip->dev,
- "error reading data\n");
+ dev_err(chip->dev, "error reading data\n");
return -EIO;
}
}
@@ -76,17 +74,17 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
/* read all the data available */
for (; i < size; i++) {
- status = atmel_getb(chip, 1);
+ status = ioread8(chip->vendor->iobase + 1);
if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
- dev_err(chip->dev,
- "error reading data\n");
+ dev_err(chip->dev, "error reading data\n");
return -EIO;
}
- *buf++ = atmel_getb(chip, 0);
+ *buf++ = ioread8(chip->vendor->iobase);
}
/* make sure data available is gone */
- status = atmel_getb(chip, 1);
+ status = ioread8(chip->vendor->iobase + 1);
+
if (status & ATML_STATUS_DATA_AVAIL) {
dev_err(chip->dev, "data available is stuck\n");
return -EIO;
@@ -102,7 +100,7 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
dev_dbg(chip->dev, "tpm_atml_send:\n");
for (i = 0; i < count; i++) {
dev_dbg(chip->dev, "%d 0x%x(%d)\n", i, buf[i], buf[i]);
- atmel_putb(buf[i], chip, 0);
+ iowrite8(buf[i], chip->vendor->iobase);
}
return count;
@@ -110,12 +108,12 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
static void tpm_atml_cancel(struct tpm_chip *chip)
{
- atmel_putb(ATML_STATUS_ABORT, chip, 1);
+ iowrite8(ATML_STATUS_ABORT, chip->vendor->iobase + 1);
}
static u8 tpm_atml_status(struct tpm_chip *chip)
{
- return atmel_getb(chip, 1);
+ return ioread8(chip->vendor->iobase + 1);
}
static struct file_operations atmel_ops = {
@@ -162,7 +160,8 @@ static void atml_plat_remove(void)
if (chip) {
if (chip->vendor->have_region)
- atmel_release_region(chip->vendor->base, chip->vendor->region_size);
+ atmel_release_region(chip->vendor->base,
+ chip->vendor->region_size);
atmel_put_base_addr(chip->vendor);
tpm_remove_hardware(chip->dev);
platform_device_unregister(pdev);
@@ -183,14 +182,19 @@ static int __init init_atmel(void)
driver_register(&atml_drv);
- if (atmel_get_base_addr(&tpm_atmel) != 0) {
+ if ((tpm_atmel.iobase = atmel_get_base_addr(&tpm_atmel)) == NULL) {
rc = -ENODEV;
goto err_unreg_drv;
}
- tpm_atmel.have_region = (atmel_request_region( tpm_atmel.base, tpm_atmel.region_size, "tpm_atmel0") == NULL) ? 0 : 1;
+ tpm_atmel.have_region =
+ (atmel_request_region
+ (tpm_atmel.base, tpm_atmel.region_size,
+ "tpm_atmel0") == NULL) ? 0 : 1;
- if (IS_ERR(pdev = platform_device_register_simple("tpm_atmel", -1, NULL, 0 ))) {
+ if (IS_ERR
+ (pdev =
+ platform_device_register_simple("tpm_atmel", -1, NULL, 0))) {
rc = PTR_ERR(pdev);
goto err_rel_reg;
}
@@ -202,9 +206,10 @@ static int __init init_atmel(void)
err_unreg_dev:
platform_device_unregister(pdev);
err_rel_reg:
- if (tpm_atmel.have_region)
- atmel_release_region(tpm_atmel.base, tpm_atmel.region_size);
atmel_put_base_addr(&tpm_atmel);
+ if (tpm_atmel.have_region)
+ atmel_release_region(tpm_atmel.base,
+ tpm_atmel.region_size);
err_unreg_drv:
driver_unregister(&atml_drv);
return rc;
diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h
index 3c5b9a8d1c497d66bba68ec66f9ace9670d0ac42..d3478aaadd77a20b24db39f668ea1efb1f826f1c 100644
--- a/drivers/char/tpm/tpm_atmel.h
+++ b/drivers/char/tpm/tpm_atmel.h
@@ -27,12 +27,14 @@
#define atmel_putb(val, chip, offset) writeb(val, chip->vendor->iobase + offset)
#define atmel_request_region request_mem_region
#define atmel_release_region release_mem_region
-static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor)
+
+static inline void atmel_put_base_addr(struct tpm_vendor_specific
+ *vendor)
{
iounmap(vendor->iobase);
}
-static int atmel_get_base_addr(struct tpm_vendor_specific *vendor)
+static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor)
{
struct device_node *dn;
unsigned long address, size;
@@ -44,11 +46,11 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor)
dn = of_find_node_by_name(NULL, "tpm");
if (!dn)
- return 1;
+ return NULL;
if (!device_is_compatible(dn, "AT97SC3201")) {
of_node_put(dn);
- return 1;
+ return NULL;
}
reg = (unsigned int *) get_property(dn, "reg", ®len);
@@ -71,8 +73,7 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor)
vendor->base = address;
vendor->region_size = size;
- vendor->iobase = ioremap(address, size);
- return 0;
+ return ioremap(vendor->base, vendor->region_size);
}
#else
#define atmel_getb(chip, offset) inb(chip->vendor->base + offset)
@@ -105,18 +106,19 @@ static int atmel_verify_tpm11(void)
return 0;
}
-static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor)
+static inline void atmel_put_base_addr(struct tpm_vendor_specific
+ *vendor)
{
}
/* Determine where to talk to device */
-static unsigned long atmel_get_base_addr(struct tpm_vendor_specific
+static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific
*vendor)
{
int lo, hi;
if (atmel_verify_tpm11() != 0)
- return 1;
+ return NULL;
lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
@@ -124,6 +126,6 @@ static unsigned long atmel_get_base_addr(struct tpm_vendor_specific
vendor->base = (hi << 8) | lo;
vendor->region_size = 2;
- return 0;
+ return ioport_map(vendor->base, vendor->region_size);
}
#endif
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 51315302a85e43ab651a4edaba742784d5e04af2..252d55df964296c97960242a016fc7b8573c4279 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -326,9 +326,9 @@ static int write_page(struct bitmap *bitmap, struct page *page, int wait)
}
}
- ret = page->mapping->a_ops->prepare_write(NULL, page, 0, PAGE_SIZE);
+ ret = page->mapping->a_ops->prepare_write(bitmap->file, page, 0, PAGE_SIZE);
if (!ret)
- ret = page->mapping->a_ops->commit_write(NULL, page, 0,
+ ret = page->mapping->a_ops->commit_write(bitmap->file, page, 0,
PAGE_SIZE);
if (ret) {
unlock_page(page);
diff --git a/drivers/md/md.c b/drivers/md/md.c
index f3fed662f32ea603dbe76625369ea8ffaf24672f..78c7418478d63e86f55127026d227bfae18e94a3 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3846,11 +3846,20 @@ static int is_mddev_idle(mddev_t *mddev)
curr_events = disk_stat_read(disk, sectors[0]) +
disk_stat_read(disk, sectors[1]) -
atomic_read(&disk->sync_io);
- /* Allow some slack between valud of curr_events and last_events,
- * as there are some uninteresting races.
+ /* The difference between curr_events and last_events
+ * will be affected by any new non-sync IO (making
+ * curr_events bigger) and any difference in the amount of
+ * in-flight syncio (making current_events bigger or smaller)
+ * The amount in-flight is currently limited to
+ * 32*64K in raid1/10 and 256*PAGE_SIZE in raid5/6
+ * which is at most 4096 sectors.
+ * These numbers are fairly fragile and should be made
+ * more robust, probably by enforcing the
+ * 'window size' that md_do_sync sort-of uses.
+ *
* Note: the following is an unsigned comparison.
*/
- if ((curr_events - rdev->last_events + 32) > 64) {
+ if ((curr_events - rdev->last_events + 4096) > 8192) {
rdev->last_events = curr_events;
idle = 0;
}
@@ -4109,7 +4118,7 @@ static void md_do_sync(mddev_t *mddev)
if (currspeed > sysctl_speed_limit_min) {
if ((currspeed > sysctl_speed_limit_max) ||
!is_mddev_idle(mddev)) {
- msleep(250);
+ msleep(500);
goto repeat;
}
}
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 332e9953c55cdd4d80a50ba1fcfcaa0be6d52b45..cd0b1dccfb6102119334a357762b1c93502fec72 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -32,6 +32,7 @@
*
*/
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 7a6aeae2c9fa9698f6ccd8bc9914e4b1e6b3e850..22cd045567075d33f26356cac785866212362506 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -156,7 +156,7 @@
#define DRV_NAME "e100"
#define DRV_EXT "-NAPI"
-#define DRV_VERSION "3.4.14-k2"DRV_EXT
+#define DRV_VERSION "3.4.14-k4"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
#define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation"
#define PFX DRV_NAME ": "
@@ -903,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
static void e100_get_defaults(struct nic *nic)
{
- struct param_range rfds = { .min = 16, .max = 256, .count = 64 };
- struct param_range cbs = { .min = 64, .max = 256, .count = 64 };
+ struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
+ struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
@@ -1007,25 +1007,264 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
}
+/********************************************************/
+/* Micro code for 8086:1229 Rev 8 */
+/********************************************************/
+
+/* Parameter values for the D101M B-step */
+#define D101M_CPUSAVER_TIMER_DWORD 78
+#define D101M_CPUSAVER_BUNDLE_DWORD 65
+#define D101M_CPUSAVER_MIN_SIZE_DWORD 126
+
+#define D101M_B_RCVBUNDLE_UCODE \
+{\
+0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
+0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
+0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
+0x00380438, 0x00000000, 0x00140000, 0x00380555, \
+0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
+0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
+0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
+0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
+0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
+0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
+0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
+0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
+0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
+0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
+0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
+0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
+0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
+0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
+0x00380559, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
+0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
+0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
+}
+
+/********************************************************/
+/* Micro code for 8086:1229 Rev 9 */
+/********************************************************/
+
+/* Parameter values for the D101S */
+#define D101S_CPUSAVER_TIMER_DWORD 78
+#define D101S_CPUSAVER_BUNDLE_DWORD 67
+#define D101S_CPUSAVER_MIN_SIZE_DWORD 128
+
+#define D101S_RCVBUNDLE_UCODE \
+{\
+0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
+0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
+0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
+0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
+0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
+0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
+0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
+0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
+0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
+0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
+0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
+0x00101313, 0x00380700, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
+0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
+0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
+0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
+0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
+0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
+0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
+0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
+0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00130831, \
+0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
+0x00041000, 0x00010004, 0x00380700 \
+}
+
+/********************************************************/
+/* Micro code for the 8086:1229 Rev F/10 */
+/********************************************************/
+
+/* Parameter values for the D102 E-step */
+#define D102_E_CPUSAVER_TIMER_DWORD 42
+#define D102_E_CPUSAVER_BUNDLE_DWORD 54
+#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46
+
+#define D102_E_RCVBUNDLE_UCODE \
+{\
+0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
+0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
+0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
+0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
+0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
+0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
+0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+}
+
static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
{
- int i;
- static const u32 ucode[UCODE_SIZE] = {
- /* NFS packets are misinterpreted as TCO packets and
- * incorrectly routed to the BMC over SMBus. This
- * microcode patch checks the fragmented IP bit in the
- * NFS/UDP header to distinguish between NFS and TCO. */
- 0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF,
- 0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000,
- 0x00906EFD, 0x00900EFD, 0x00E00EF8,
- };
-
- if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) {
- for(i = 0; i < UCODE_SIZE; i++)
+/* *INDENT-OFF* */
+ static struct {
+ u32 ucode[UCODE_SIZE + 1];
+ u8 mac;
+ u8 timer_dword;
+ u8 bundle_dword;
+ u8 min_size_dword;
+ } ucode_opts[] = {
+ { D101M_B_RCVBUNDLE_UCODE,
+ mac_82559_D101M,
+ D101M_CPUSAVER_TIMER_DWORD,
+ D101M_CPUSAVER_BUNDLE_DWORD,
+ D101M_CPUSAVER_MIN_SIZE_DWORD },
+ { D101S_RCVBUNDLE_UCODE,
+ mac_82559_D101S,
+ D101S_CPUSAVER_TIMER_DWORD,
+ D101S_CPUSAVER_BUNDLE_DWORD,
+ D101S_CPUSAVER_MIN_SIZE_DWORD },
+ { D102_E_RCVBUNDLE_UCODE,
+ mac_82551_F,
+ D102_E_CPUSAVER_TIMER_DWORD,
+ D102_E_CPUSAVER_BUNDLE_DWORD,
+ D102_E_CPUSAVER_MIN_SIZE_DWORD },
+ { D102_E_RCVBUNDLE_UCODE,
+ mac_82551_10,
+ D102_E_CPUSAVER_TIMER_DWORD,
+ D102_E_CPUSAVER_BUNDLE_DWORD,
+ D102_E_CPUSAVER_MIN_SIZE_DWORD },
+ { {0}, 0, 0, 0, 0}
+ }, *opts;
+/* *INDENT-ON* */
+
+/*************************************************************************
+* CPUSaver parameters
+*
+* All CPUSaver parameters are 16-bit literals that are part of a
+* "move immediate value" instruction. By changing the value of
+* the literal in the instruction before the code is loaded, the
+* driver can change the algorithm.
+*
+* INTDELAY - This loads the dead-man timer with its inital value.
+* When this timer expires the interrupt is asserted, and the
+* timer is reset each time a new packet is received. (see
+* BUNDLEMAX below to set the limit on number of chained packets)
+* The current default is 0x600 or 1536. Experiments show that
+* the value should probably stay within the 0x200 - 0x1000.
+*
+* BUNDLEMAX -
+* This sets the maximum number of frames that will be bundled. In
+* some situations, such as the TCP windowing algorithm, it may be
+* better to limit the growth of the bundle size than let it go as
+* high as it can, because that could cause too much added latency.
+* The default is six, because this is the number of packets in the
+* default TCP window size. A value of 1 would make CPUSaver indicate
+* an interrupt for every frame received. If you do not want to put
+* a limit on the bundle size, set this value to xFFFF.
+*
+* BUNDLESMALL -
+* This contains a bit-mask describing the minimum size frame that
+* will be bundled. The default masks the lower 7 bits, which means
+* that any frame less than 128 bytes in length will not be bundled,
+* but will instead immediately generate an interrupt. This does
+* not affect the current bundle in any way. Any frame that is 128
+* bytes or large will be bundled normally. This feature is meant
+* to provide immediate indication of ACK frames in a TCP environment.
+* Customers were seeing poor performance when a machine with CPUSaver
+* enabled was sending but not receiving. The delay introduced when
+* the ACKs were received was enough to reduce total throughput, because
+* the sender would sit idle until the ACK was finally seen.
+*
+* The current default is 0xFF80, which masks out the lower 7 bits.
+* This means that any frame which is x7F (127) bytes or smaller
+* will cause an immediate interrupt. Because this value must be a
+* bit mask, there are only a few valid values that can be used. To
+* turn this feature off, the driver can write the value xFFFF to the
+* lower word of this instruction (in the same way that the other
+* parameters are used). Likewise, a value of 0xF800 (2047) would
+* cause an interrupt to be generated for every frame, because all
+* standard Ethernet frames are <= 2047 bytes in length.
+*************************************************************************/
+
+/* if you wish to disable the ucode functionality, while maintaining the
+ * workarounds it provides, set the following defines to:
+ * BUNDLESMALL 0
+ * BUNDLEMAX 1
+ * INTDELAY 1
+ */
+#define BUNDLESMALL 1
+#define BUNDLEMAX (u16)6
+#define INTDELAY (u16)1536 /* 0x600 */
+
+ /* do not load u-code for ICH devices */
+ if (nic->flags & ich)
+ goto noloaducode;
+
+ /* Search for ucode match against h/w rev_id */
+ for (opts = ucode_opts; opts->mac; opts++) {
+ int i;
+ u32 *ucode = opts->ucode;
+ if (nic->mac != opts->mac)
+ continue;
+
+ /* Insert user-tunable settings */
+ ucode[opts->timer_dword] &= 0xFFFF0000;
+ ucode[opts->timer_dword] |= INTDELAY;
+ ucode[opts->bundle_dword] &= 0xFFFF0000;
+ ucode[opts->bundle_dword] |= BUNDLEMAX;
+ ucode[opts->min_size_dword] &= 0xFFFF0000;
+ ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80;
+
+ for (i = 0; i < UCODE_SIZE; i++)
cb->u.ucode[i] = cpu_to_le32(ucode[i]);
cb->command = cpu_to_le16(cb_ucode);
- } else
- cb->command = cpu_to_le16(cb_nop);
+ return;
+ }
+
+noloaducode:
+ cb->command = cpu_to_le16(cb_nop);
}
static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
diff --git a/drivers/net/fec_8xx/Kconfig b/drivers/net/fec_8xx/Kconfig
index 94e7a9af87055f0642abccb1309a43a2ec95d8cc..a84c232395e3fdf72dc63c070341ad756d2aaa39 100644
--- a/drivers/net/fec_8xx/Kconfig
+++ b/drivers/net/fec_8xx/Kconfig
@@ -1,6 +1,6 @@
config FEC_8XX
tristate "Motorola 8xx FEC driver"
- depends on NET_ETHERNET && FEC
+ depends on NET_ETHERNET && 8xx
select MII
config FEC_8XX_GENERIC_PHY
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index 6a3129bc15a6d6327c5dec32f8e518049e6c5787..9b8295ee06ef1fb069f283a950f12a67b0ae113b 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -1360,7 +1360,7 @@ static struct pci_driver ioc3_driver = {
static int __init ioc3_init_module(void)
{
- return pci_module_init(&ioc3_driver);
+ return pci_register_driver(&ioc3_driver);
}
static void __exit ioc3_cleanup_module(void)
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 159b56a56ef49112fc5e58083c76a3066eb76958..14a76f7cf900fa86493ba745bf9fe1bbabb23c6c 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1346,10 +1346,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
} else {
if (netif_msg_probe(tp)) {
printk(KERN_ERR PFX
- "Cannot find PowerManagement capability. "
- "Aborting.\n");
+ "PowerManagement capability not found.\n");
}
- goto err_out_mwi;
}
/* make sure PCI base addr 1 is MMIO */
@@ -2516,7 +2514,7 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
} while (boguscnt > 0);
if (boguscnt <= 0) {
- if (net_ratelimit() && netif_msg_intr(tp)) {
+ if (netif_msg_intr(tp) && net_ratelimit() ) {
printk(KERN_WARNING
"%s: Too much work at interrupt!\n", dev->name);
}
diff --git a/drivers/net/saa9730.h b/drivers/net/saa9730.h
index 9e9da6b4080fa2ab27b5961d4af9ae1e9761e0da..a7e9d29a86a725ae67fdde869b1b9df2c6511e8e 100644
--- a/drivers/net/saa9730.h
+++ b/drivers/net/saa9730.h
@@ -1,6 +1,7 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2000, 2005 MIPS Technologies, Inc. All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* ########################################################################
*
@@ -265,6 +266,7 @@
/* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */
#define SAA9730_LAN_REGS_ADDR 0x20400
+#define SAA9730_LAN_REGS_SIZE 0x00400
struct lan_saa9730_regmap {
volatile unsigned int TxBuffA; /* 0x20400 */
@@ -309,6 +311,7 @@ typedef volatile struct lan_saa9730_regmap t_lan_saa9730_regmap;
/* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */
#define SAA9730_EVM_REGS_ADDR 0x02000
+#define SAA9730_EVM_REGS_SIZE 0x00400
struct evm_saa9730_regmap {
volatile unsigned int InterruptStatus1; /* 0x2000 */
@@ -329,16 +332,32 @@ typedef volatile struct evm_saa9730_regmap t_evm_saa9730_regmap;
struct lan_saa9730_private {
+ /*
+ * Rx/Tx packet buffers.
+ * The Rx and Tx packets must be PACKET_SIZE aligned.
+ */
+ void *buffer_start;
+ unsigned int buffer_size;
+
+ /*
+ * DMA address of beginning of this object, returned
+ * by pci_alloc_consistent().
+ */
+ dma_addr_t dma_addr;
+
+ /* Pointer to the associated pci device structure */
+ struct pci_dev *pci_dev;
+
/* Pointer for the SAA9730 LAN controller register set. */
t_lan_saa9730_regmap *lan_saa9730_regs;
/* Pointer to the SAA9730 EVM register. */
t_evm_saa9730_regmap *evm_saa9730_regs;
- /* TRUE if the next buffer to write is RxBuffA, FALSE if RxBuffB. */
- unsigned char NextRcvToUseIsA;
/* Rcv buffer Index. */
unsigned char NextRcvPacketIndex;
+ /* Next buffer index. */
+ unsigned char NextRcvBufferIndex;
/* Index of next packet to use in that buffer. */
unsigned char NextTxmPacketIndex;
@@ -353,13 +372,8 @@ struct lan_saa9730_private {
unsigned char DmaRcvPackets;
unsigned char DmaTxmPackets;
- unsigned char RcvAIndex; /* index into RcvBufferSpace[] for Blk A */
- unsigned char RcvBIndex; /* index into RcvBufferSpace[] for Blk B */
-
- unsigned int
- TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
- unsigned int
- RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
+ void *TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
+ void *RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
unsigned int TxBufferFree[LAN_SAA9730_BUFFERS];
unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6];
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index c91e2e81f131aa368ca81b9eb20bb5722aa8c765..28bf2e69eb5e1a1c9f181d2810447f8dd30ac10a 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -154,6 +154,12 @@ MODULE_LICENSE("GPL");
*/
#define MEMORY_WAIT_TIME 16
+/*
+ * The maximum number of processing loops allowed for each call to the
+ * IRQ handler.
+ */
+#define MAX_IRQ_LOOPS 8
+
/*
* This selects whether TX packets are sent one by one to the SMC91x internal
* memory and throttled until transmission completes. This may prevent
@@ -684,7 +690,6 @@ static void smc_hardware_send_pkt(unsigned long data)
/* queue the packet for TX */
SMC_SET_MMU_CMD(MC_ENQUEUE);
- SMC_ACK_INT(IM_TX_EMPTY_INT);
smc_special_unlock(&lp->lock);
dev->trans_start = jiffies;
@@ -1207,6 +1212,7 @@ static void smc_phy_configure(void *data)
smc_phy_check_media(dev, 1);
smc_phy_configure_exit:
+ SMC_SELECT_BANK(2);
spin_unlock_irq(&lp->lock);
lp->work_pending = 0;
}
@@ -1305,7 +1311,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
SMC_SET_INT_MASK(0);
/* set a timeout value, so I don't stay here forever */
- timeout = 8;
+ timeout = MAX_IRQ_LOOPS;
do {
status = SMC_GET_INT();
@@ -1372,10 +1378,13 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
/* restore register states */
SMC_SET_PTR(saved_pointer);
SMC_SET_INT_MASK(mask);
-
spin_unlock(&lp->lock);
- DBG(3, "%s: Interrupt done (%d loops)\n", dev->name, 8-timeout);
+ if (timeout == MAX_IRQ_LOOPS)
+ PRINTK("%s: spurious interrupt (mask = 0x%02x)\n",
+ dev->name, mask);
+ DBG(3, "%s: Interrupt done (%d loops)\n",
+ dev->name, MAX_IRQ_LOOPS - timeout);
/*
* We return IRQ_HANDLED unconditionally here even if there was
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index a01efa6d5c629bd81457a64769f015f75ebea4c7..1fd04662c4fce290534991bee6c8476dc8a7efcd 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -192,7 +192,9 @@ static int cisco_rx(struct sk_buff *skb)
"uptime %ud%uh%um%us)\n",
dev->name, days, hrs,
min, sec);
+#if 0
netif_carrier_on(dev);
+#endif
hdlc->state.cisco.up = 1;
}
}
@@ -225,7 +227,9 @@ static void cisco_timer(unsigned long arg)
hdlc->state.cisco.settings.timeout * HZ)) {
hdlc->state.cisco.up = 0;
printk(KERN_INFO "%s: Link down\n", dev->name);
+#if 0
netif_carrier_off(dev);
+#endif
}
cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
@@ -261,8 +265,10 @@ static void cisco_stop(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
del_timer_sync(&hdlc->state.cisco.timer);
+#if 0
if (netif_carrier_ok(dev))
netif_carrier_off(dev);
+#endif
hdlc->state.cisco.up = 0;
hdlc->state.cisco.request_sent = 0;
}
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index e1601d35dceddf133379a57155ca9472294b2eac..523afe17564e20f1c728b98a9d148ec9d309aced 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -545,8 +545,10 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
hdlc->state.fr.reliable = reliable;
if (reliable) {
+#if 0
if (!netif_carrier_ok(dev))
netif_carrier_on(dev);
+#endif
hdlc->state.fr.n391cnt = 0; /* Request full status */
hdlc->state.fr.dce_changed = 1;
@@ -560,8 +562,10 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
}
}
} else {
+#if 0
if (netif_carrier_ok(dev))
netif_carrier_off(dev);
+#endif
while (pvc) { /* Deactivate all PVCs */
pvc_carrier(0, pvc);
diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c
index cdd4c09c2d90355adee28e09d42f560ab42d040f..46cef8f921333ac245f31a4beb13584def82fb25 100644
--- a/drivers/net/wan/hdlc_generic.c
+++ b/drivers/net/wan/hdlc_generic.c
@@ -79,11 +79,13 @@ static void __hdlc_set_carrier_on(struct net_device *dev)
hdlc_device *hdlc = dev_to_hdlc(dev);
if (hdlc->proto.start)
return hdlc->proto.start(dev);
+#if 0
#ifdef DEBUG_LINK
if (netif_carrier_ok(dev))
printk(KERN_ERR "hdlc_set_carrier_on(): already on\n");
#endif
netif_carrier_on(dev);
+#endif
}
@@ -94,11 +96,13 @@ static void __hdlc_set_carrier_off(struct net_device *dev)
if (hdlc->proto.stop)
return hdlc->proto.stop(dev);
+#if 0
#ifdef DEBUG_LINK
if (!netif_carrier_ok(dev))
printk(KERN_ERR "hdlc_set_carrier_off(): already off\n");
#endif
netif_carrier_off(dev);
+#endif
}
@@ -294,8 +298,10 @@ int register_hdlc_device(struct net_device *dev)
if (result != 0)
return -EIO;
+#if 0
if (netif_carrier_ok(dev))
netif_carrier_off(dev); /* no carrier until DCD goes up */
+#endif
return 0;
}
diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c
index 579480dad3746cba6f956792c0c09ae445dd50ae..346c6febb033b89e217591819727e21ae62ecc43 100644
--- a/drivers/net/wireless/hermes.c
+++ b/drivers/net/wireless/hermes.c
@@ -398,7 +398,7 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
*
* Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
*/
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
@@ -424,7 +424,7 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
*
* Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
*/
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
@@ -450,7 +450,7 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
*
* Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
*/
-int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, unsigned len,
+int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, int len,
u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h
index a6bd472d75d4c83924131a6b4d19a9cfb8540fe8..7644f72a9f4efd3269c40cd46b09cefbda196e85 100644
--- a/drivers/net/wireless/hermes.h
+++ b/drivers/net/wireless/hermes.h
@@ -372,12 +372,12 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
struct hermes_response *resp);
int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
u16 id, u16 offset);
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
u16 id, u16 offset);
int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf,
- unsigned data_len, unsigned len, u16 id, u16 offset);
+ unsigned data_len, int len, u16 id, u16 offset);
int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
u16 *length, void *buf);
int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
diff --git a/drivers/net/wireless/i82593.h b/drivers/net/wireless/i82593.h
index 33acb8add4d6242a0d39ff8fdfeb1aa7fd84ca2d..afac5c7a323d35c77f2f6aa9d31d24184b1500df 100644
--- a/drivers/net/wireless/i82593.h
+++ b/drivers/net/wireless/i82593.h
@@ -7,11 +7,16 @@
*
* Copyright 1994, Anders Klemets <klemets@it.kth.se>
*
- * This software may be freely distributed for noncommercial purposes
- * as long as this notice is retained.
- *
* HISTORY
* i82593.h,v
+ * Revision 1.4 2005/11/4 09:15:00 baroniunas
+ * Modified copyright with permission of author as follows:
+ *
+ * "If I82539.H is the only file with my copyright statement
+ * that is included in the Source Forge project, then you have
+ * my approval to change the copyright statement to be a GPL
+ * license, in the way you proposed on October 10."
+ *
* Revision 1.1 1996/07/17 15:23:12 root
* Initial revision
*
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index a2e6214169e914ba6e79b4d8bfe631a730449633..77d2a21d4cd00f879abe206480f80ea75441aca7 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -6344,7 +6344,8 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
dev->ethtool_ops = &ipw2100_ethtool_ops;
dev->tx_timeout = ipw2100_tx_timeout;
dev->wireless_handlers = &ipw2100_wx_handler_def;
- dev->get_wireless_stats = ipw2100_wx_wireless_stats;
+ priv->wireless_data.ieee80211 = priv->ieee;
+ dev->wireless_data = &priv->wireless_data;
dev->set_mac_address = ipw2100_set_address;
dev->watchdog_timeo = 3 * HZ;
dev->irq = 0;
@@ -7178,6 +7179,11 @@ static int ipw2100_wx_get_range(struct net_device *dev,
}
range->num_frequency = val;
+ /* Event capability (kernel + driver) */
+ range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
+ IW_EVENT_CAPA_MASK(SIOCGIWAP));
+ range->event_capa[1] = IW_EVENT_CAPA_K_1;
+
IPW_DEBUG_WX("GET Range\n");
return 0;
@@ -8446,16 +8452,6 @@ static iw_handler ipw2100_private_handler[] = {
#endif /* CONFIG_IPW2100_MONITOR */
};
-static struct iw_handler_def ipw2100_wx_handler_def = {
- .standard = ipw2100_wx_handlers,
- .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
- .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
- .num_private_args = sizeof(ipw2100_private_args) /
- sizeof(struct iw_priv_args),
- .private = (iw_handler *) ipw2100_private_handler,
- .private_args = (struct iw_priv_args *)ipw2100_private_args,
-};
-
/*
* Get wireless statistics.
* Called by /proc/net/wireless
@@ -8597,6 +8593,17 @@ static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev)
return (struct iw_statistics *)NULL;
}
+static struct iw_handler_def ipw2100_wx_handler_def = {
+ .standard = ipw2100_wx_handlers,
+ .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
+ .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
+ .num_private_args = sizeof(ipw2100_private_args) /
+ sizeof(struct iw_priv_args),
+ .private = (iw_handler *) ipw2100_private_handler,
+ .private_args = (struct iw_priv_args *)ipw2100_private_args,
+ .get_wireless_stats = ipw2100_wx_wireless_stats,
+};
+
static void ipw2100_wx_event_work(struct ipw2100_priv *priv)
{
union iwreq_data wrqu;
diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h
index 140fdf2a0a09a58afdcbe36658a07476c16474c4..7c65b10bb164d00b0d2a0fb393b4ec1e97cdd85b 100644
--- a/drivers/net/wireless/ipw2100.h
+++ b/drivers/net/wireless/ipw2100.h
@@ -571,6 +571,8 @@ struct ipw2100_priv {
struct net_device *net_dev;
struct iw_statistics wstats;
+ struct iw_public_data wireless_data;
+
struct tasklet_struct irq_tasklet;
struct workqueue_struct *workqueue;
diff --git a/drivers/net/wireless/prism54/isl_38xx.c b/drivers/net/wireless/prism54/isl_38xx.c
index 109a96d90007ba53ad39a15cec8be73ed56945f4..23deee69974b3eeed03af5a59a7286208f276ad4 100644
--- a/drivers/net/wireless/prism54/isl_38xx.c
+++ b/drivers/net/wireless/prism54/isl_38xx.c
@@ -164,12 +164,12 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base)
/* assert the Wakeup interrupt in the Device Interrupt Register */
isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP,
ISL38XX_DEV_INT_REG);
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
udelay(ISL38XX_WRITEIO_DELAY);
/* perform another read on the Device Status Register */
reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
do_gettimeofday(¤t_time);
DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
current_time.tv_sec, (long)current_time.tv_usec, reg);
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index f5b7d360fc10ae5973003ad2cd25031b71976503..1026f2bc318565334daa386321f592f125691010 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -1179,12 +1179,12 @@ raw3270_create_attributes(struct raw3270 *rp)
//FIXME: check return code
sysfs_create_group(&rp->cdev->dev.kobj, &raw3270_attr_group);
rp->clttydev =
- class_device_create(class3270,
+ class_device_create(class3270, NULL,
MKDEV(IBM_TTY3270_MAJOR, rp->minor),
&rp->cdev->dev, "tty%s",
rp->cdev->dev.bus_id);
rp->cltubdev =
- class_device_create(class3270,
+ class_device_create(class3270, NULL,
MKDEV(IBM_FS3270_MAJOR, rp->minor),
&rp->cdev->dev, "tub%s",
rp->cdev->dev.bus_id);
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index ac184e60797e5f1ffe055c999d648cd06e58c557..ab7432a5778e278a7ece69777d253911b365646e 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -2,6 +2,7 @@
* sata_mv.c - Marvell SATA support
*
* Copyright 2005: EMC Corporation, all rights reserved.
+ * Copyright 2005 Red Hat, Inc. All rights reserved.
*
* Please ALWAYS copy linux-ide@vger.kernel.org on emails.
*
@@ -36,7 +37,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.25"
+#define DRV_VERSION "0.5"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index cb1933a3bd55e03ca88ccfe9e5e6af74dd9a07e6..e0d6f194f54f50217b047083300c32133b35e18e 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -5,17 +5,6 @@
*
* Based on preview driver from Silicon Image.
*
- * NOTE: No NCQ/ATAPI support yet. The preview driver didn't support
- * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make
- * those work. Enabling those shouldn't be difficult. Basic
- * structure is all there (in libata-dev tree). If you have any
- * information about this hardware, please contact me or linux-ide.
- * Info is needed on...
- *
- * - How to issue tagged commands and turn on sactive on issue accordingly.
- * - Where to put an ATAPI command and how to tell the device to send it.
- * - How to enable/use 64bit.
- *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
@@ -42,7 +31,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_sil24"
-#define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */
+#define DRV_VERSION "0.23"
/*
* Port request block (PRB) 32 bytes
@@ -221,11 +210,22 @@ enum {
IRQ_STAT_4PORTS = 0xf,
};
-struct sil24_cmd_block {
+struct sil24_ata_block {
struct sil24_prb prb;
struct sil24_sge sge[LIBATA_MAX_PRD];
};
+struct sil24_atapi_block {
+ struct sil24_prb prb;
+ u8 cdb[16];
+ struct sil24_sge sge[LIBATA_MAX_PRD - 1];
+};
+
+union sil24_cmd_block {
+ struct sil24_ata_block ata;
+ struct sil24_atapi_block atapi;
+};
+
/*
* ap->private_data
*
@@ -233,7 +233,7 @@ struct sil24_cmd_block {
* here from the previous interrupt.
*/
struct sil24_port_priv {
- struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */
+ union sil24_cmd_block *cmd_block; /* 32 cmd blocks */
dma_addr_t cmd_block_dma; /* DMA base addr for them */
struct ata_taskfile tf; /* Cached taskfile registers */
};
@@ -244,6 +244,7 @@ struct sil24_host_priv {
void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */
};
+static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev);
static u8 sil24_check_status(struct ata_port *ap);
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
@@ -297,6 +298,8 @@ static struct scsi_host_template sil24_sht = {
static const struct ata_port_operations sil24_ops = {
.port_disable = ata_port_disable,
+ .dev_config = sil24_dev_config,
+
.check_status = sil24_check_status,
.check_altstatus = sil24_check_status,
.dev_select = ata_noop_dev_select,
@@ -333,7 +336,7 @@ static struct ata_port_info sil24_port_info[] = {
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -344,7 +347,7 @@ static struct ata_port_info sil24_port_info[] = {
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -355,7 +358,7 @@ static struct ata_port_info sil24_port_info[] = {
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -364,6 +367,16 @@ static struct ata_port_info sil24_port_info[] = {
},
};
+static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
+{
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+
+ if (ap->cdb_len == 16)
+ writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
+ else
+ writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
+}
+
static inline void sil24_update_tf(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
@@ -415,22 +428,73 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
*tf = pp->tf;
}
-static void sil24_phy_reset(struct ata_port *ap)
+static int sil24_issue_SRST(struct ata_port *ap)
{
- __sata_phy_reset(ap);
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+ struct sil24_port_priv *pp = ap->private_data;
+ struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
+ dma_addr_t paddr = pp->cmd_block_dma;
+ u32 irq_enable, irq_stat;
+ int cnt;
+
+ /* temporarily turn off IRQs during SRST */
+ irq_enable = readl(port + PORT_IRQ_ENABLE_SET);
+ writel(irq_enable, port + PORT_IRQ_ENABLE_CLR);
+
/*
- * No ATAPI yet. Just unconditionally indicate ATA device.
- * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA
- * and libata core will ignore the device.
+ * XXX: Not sure whether the following sleep is needed or not.
+ * The original driver had it. So....
*/
- if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
- ap->device[0].class = ATA_DEV_ATA;
+ msleep(10);
+
+ prb->ctrl = PRB_CTRL_SRST;
+ prb->fis[1] = 0; /* no PM yet */
+
+ writel((u32)paddr, port + PORT_CMD_ACTIVATE);
+
+ for (cnt = 0; cnt < 100; cnt++) {
+ irq_stat = readl(port + PORT_IRQ_STAT);
+ writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */
+
+ irq_stat >>= PORT_IRQ_RAW_SHIFT;
+ if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR))
+ break;
+
+ msleep(1);
+ }
+
+ /* restore IRQs */
+ writel(irq_enable, port + PORT_IRQ_ENABLE_SET);
+
+ if (!(irq_stat & PORT_IRQ_COMPLETE))
+ return -1;
+
+ /* update TF */
+ sil24_update_tf(ap);
+ return 0;
+}
+
+static void sil24_phy_reset(struct ata_port *ap)
+{
+ struct sil24_port_priv *pp = ap->private_data;
+
+ __sata_phy_reset(ap);
+ if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ return;
+
+ if (sil24_issue_SRST(ap) < 0) {
+ printk(KERN_ERR DRV_NAME
+ " ata%u: SRST failed, disabling port\n", ap->id);
+ ap->ops->port_disable(ap);
+ return;
+ }
+
+ ap->device->class = ata_dev_classify(&pp->tf);
}
static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
- struct sil24_cmd_block *cb)
+ struct sil24_sge *sge)
{
- struct sil24_sge *sge = cb->sge;
struct scatterlist *sg;
unsigned int idx = 0;
@@ -451,23 +515,47 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct sil24_port_priv *pp = ap->private_data;
- struct sil24_cmd_block *cb = pp->cmd_block + qc->tag;
- struct sil24_prb *prb = &cb->prb;
+ union sil24_cmd_block *cb = pp->cmd_block + qc->tag;
+ struct sil24_prb *prb;
+ struct sil24_sge *sge;
switch (qc->tf.protocol) {
case ATA_PROT_PIO:
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
+ prb = &cb->ata.prb;
+ sge = cb->ata.sge;
+ prb->ctrl = 0;
+ break;
+
+ case ATA_PROT_ATAPI:
+ case ATA_PROT_ATAPI_DMA:
+ case ATA_PROT_ATAPI_NODATA:
+ prb = &cb->atapi.prb;
+ sge = cb->atapi.sge;
+ memset(cb->atapi.cdb, 0, 32);
+ memcpy(cb->atapi.cdb, qc->cdb, ap->cdb_len);
+
+ if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ prb->ctrl = PRB_CTRL_PACKET_WRITE;
+ else
+ prb->ctrl = PRB_CTRL_PACKET_READ;
+ } else
+ prb->ctrl = 0;
+
break;
+
default:
- /* ATAPI isn't supported yet */
+ prb = NULL; /* shut up, gcc */
+ sge = NULL;
BUG();
}
ata_tf_to_fis(&qc->tf, prb->fis, 0);
if (qc->flags & ATA_QCFLAG_DMAMAP)
- sil24_fill_sg(qc, cb);
+ sil24_fill_sg(qc, sge);
}
static int sil24_qc_issue(struct ata_queued_cmd *qc)
@@ -486,6 +574,31 @@ static void sil24_irq_clear(struct ata_port *ap)
/* unused */
}
+static int __sil24_restart_controller(void __iomem *port)
+{
+ u32 tmp;
+ int cnt;
+
+ writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
+
+ /* Max ~10ms */
+ for (cnt = 0; cnt < 10000; cnt++) {
+ tmp = readl(port + PORT_CTRL_STAT);
+ if (tmp & PORT_CS_RDY)
+ return 0;
+ udelay(1);
+ }
+
+ return -1;
+}
+
+static void sil24_restart_controller(struct ata_port *ap)
+{
+ if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr))
+ printk(KERN_ERR DRV_NAME
+ " ata%u: failed to restart controller\n", ap->id);
+}
+
static int __sil24_reset_controller(void __iomem *port)
{
int cnt;
@@ -505,7 +618,11 @@ static int __sil24_reset_controller(void __iomem *port)
if (tmp & PORT_CS_DEV_RST)
return -1;
- return 0;
+
+ if (tmp & PORT_CS_RDY)
+ return 0;
+
+ return __sil24_restart_controller(port);
}
static void sil24_reset_controller(struct ata_port *ap)
@@ -567,9 +684,15 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
if (serror)
writel(serror, port + PORT_SERROR);
- printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
- " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
- ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
+ /*
+ * Don't log ATAPI device errors. They're supposed to happen
+ * and any serious errors will be logged using sense data by
+ * the SCSI layer.
+ */
+ if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB)
+ printk("ata%u: error interrupt on port%d\n"
+ " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
+ ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
/*
@@ -577,6 +700,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
*/
sil24_update_tf(ap);
err_mask = ac_err_mask(pp->tf.command);
+ sil24_restart_controller(ap);
} else {
/*
* Other errors. libata currently doesn't have any
@@ -584,12 +708,11 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
* ATA_ERR.
*/
err_mask = AC_ERR_OTHER;
+ sil24_reset_controller(ap);
}
if (qc)
ata_qc_complete(qc, err_mask);
-
- sil24_reset_controller(ap);
}
static inline void sil24_host_intr(struct ata_port *ap)
@@ -665,7 +788,7 @@ static int sil24_port_start(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
struct sil24_port_priv *pp;
- struct sil24_cmd_block *cb;
+ union sil24_cmd_block *cb;
size_t cb_size = sizeof(*cb);
dma_addr_t cb_dma;
int rc = -ENOMEM;
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 18755766e406c7ae674bec5e0a408638fd373805..2ec6a78bd65e6673113141fcf68fb35305a055d3 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -185,7 +185,7 @@ static int ohci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev)
{
- struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_hcd_ppc_soc_remove(hcd, pdev);
return 0;
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index 2c856838694e1c87187ebe655c418ff0a63ae651..00d87f5bb7be0ed8f854d34b742f75e6e97807e2 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -26,6 +26,7 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/ioport.h>
+#include <linux/pci.h>
#include <asm/io.h>
#include <asm/prom.h>
@@ -325,8 +326,8 @@ static void __init offb_init_nodriver(struct device_node *dp)
int *pp, i;
unsigned int len;
int width = 640, height = 480, depth = 8, pitch;
- unsigned *up;
- unsigned long address;
+ unsigned int rsize, *up;
+ unsigned long address = 0;
if ((pp = (int *) get_property(dp, "depth", &len)) != NULL
&& len == sizeof(int))
@@ -344,10 +345,40 @@ static void __init offb_init_nodriver(struct device_node *dp)
pitch = 0x1000;
} else
pitch = width;
- if ((up = (unsigned *) get_property(dp, "address", &len)) != NULL
- && len == sizeof(unsigned))
+
+ rsize = (unsigned long)pitch * (unsigned long)height *
+ (unsigned long)(depth / 8);
+
+ /* Try to match device to a PCI device in order to get a properly
+ * translated address rather then trying to decode the open firmware
+ * stuff in various incorrect ways
+ */
+#ifdef CONFIG_PCI
+ /* First try to locate the PCI device if any */
+ {
+ struct pci_dev *pdev = NULL;
+
+ for_each_pci_dev(pdev) {
+ if (dp == pci_device_to_OF_node(pdev))
+ break;
+ }
+ if (pdev) {
+ for (i = 0; i < 6 && address == 0; i++) {
+ if ((pci_resource_flags(pdev, i) &
+ IORESOURCE_MEM) &&
+ (pci_resource_len(pdev, i) >= rsize))
+ address = pci_resource_start(pdev, i);
+ }
+ pci_dev_put(pdev);
+ }
+ }
+#endif /* CONFIG_PCI */
+
+ if (address == 0 &&
+ (up = (unsigned *) get_property(dp, "address", &len)) != NULL &&
+ len == sizeof(unsigned))
address = (u_long) * up;
- else {
+ if (address == 0) {
for (i = 0; i < dp->n_addrs; ++i)
if (dp->addrs[i].size >=
pitch * height * depth / 8)
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index f07e60f9e1024644166653ca2da431b31f61cbaf..991c00de5c4e8aa7f429abcc7566c4982d4d5c32 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -49,6 +49,8 @@
#include <linux/vt_kern.h>
#include <linux/fb.h>
#include <linux/ext2_fs.h>
+#include <linux/ext3_jbd.h>
+#include <linux/ext3_fs.h>
#include <linux/videodev.h>
#include <linux/netdevice.h>
#include <linux/raw.h>
@@ -134,6 +136,15 @@
/* Aiee. Someone does not find a difference between int and long */
#define EXT2_IOC32_GETFLAGS _IOR('f', 1, int)
#define EXT2_IOC32_SETFLAGS _IOW('f', 2, int)
+#define EXT3_IOC32_GETVERSION _IOR('f', 3, int)
+#define EXT3_IOC32_SETVERSION _IOR('f', 4, int)
+#define EXT3_IOC32_GETRSVSZ _IOR('f', 5, int)
+#define EXT3_IOC32_SETRSVSZ _IOW('f', 6, int)
+#define EXT3_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int)
+#ifdef CONFIG_JBD_DEBUG
+#define EXT3_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int)
+#endif
+
#define EXT2_IOC32_GETVERSION _IOR('v', 1, int)
#define EXT2_IOC32_SETVERSION _IOW('v', 2, int)
@@ -180,6 +191,22 @@ static int do_ext2_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
return sys_ioctl(fd, cmd, (unsigned long)compat_ptr(arg));
}
+static int do_ext3_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
+{
+ /* These are just misnamed, they actually get/put from/to user an int */
+ switch (cmd) {
+ case EXT3_IOC32_GETVERSION: cmd = EXT3_IOC_GETVERSION; break;
+ case EXT3_IOC32_SETVERSION: cmd = EXT3_IOC_SETVERSION; break;
+ case EXT3_IOC32_GETRSVSZ: cmd = EXT3_IOC_GETRSVSZ; break;
+ case EXT3_IOC32_SETRSVSZ: cmd = EXT3_IOC_SETRSVSZ; break;
+ case EXT3_IOC32_GROUP_EXTEND: cmd = EXT3_IOC_GROUP_EXTEND; break;
+#ifdef CONFIG_JBD_DEBUG
+ case EXT3_IOC32_WAIT_FOR_READONLY: cmd = EXT3_IOC_WAIT_FOR_READONLY; break;
+#endif
+ }
+ return sys_ioctl(fd, cmd, (unsigned long)compat_ptr(arg));
+}
+
struct video_tuner32 {
compat_int_t tuner;
char name[32];
@@ -2981,6 +3008,15 @@ HANDLE_IOCTL(EXT2_IOC32_GETFLAGS, do_ext2_ioctl)
HANDLE_IOCTL(EXT2_IOC32_SETFLAGS, do_ext2_ioctl)
HANDLE_IOCTL(EXT2_IOC32_GETVERSION, do_ext2_ioctl)
HANDLE_IOCTL(EXT2_IOC32_SETVERSION, do_ext2_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_GETVERSION, do_ext3_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_SETVERSION, do_ext3_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_GETRSVSZ, do_ext3_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_SETRSVSZ, do_ext3_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_GROUP_EXTEND, do_ext3_ioctl)
+COMPATIBLE_IOCTL(EXT3_IOC_GROUP_ADD)
+#ifdef CONFIG_JBD_DEBUG
+HANDLE_IOCTL(EXT3_IOC32_WAIT_FOR_READONLY, do_ext3_ioctl)
+#endif
HANDLE_IOCTL(VIDIOCGTUNER32, do_video_ioctl)
HANDLE_IOCTL(VIDIOCSTUNER32, do_video_ioctl)
HANDLE_IOCTL(VIDIOCGWIN32, do_video_ioctl)
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index 04e2726002cf2d3fadd1bff2cc653b003e80e550..d1cfa3f515ea2d2162941c42ea534a567d22d7b5 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -90,6 +90,7 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
#define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000)
#define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000)
#define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000)
+#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000)
#ifdef __powerpc64__
/* Add the 64b processor unique features in the top half of the word */
@@ -97,7 +98,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
#define CPU_FTR_16M_PAGE ASM_CONST(0x0000000200000000)
#define CPU_FTR_TLBIEL ASM_CONST(0x0000000400000000)
#define CPU_FTR_NOEXECUTE ASM_CONST(0x0000000800000000)
-#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000001000000000)
#define CPU_FTR_IABR ASM_CONST(0x0000002000000000)
#define CPU_FTR_MMCRA ASM_CONST(0x0000004000000000)
#define CPU_FTR_CTRL ASM_CONST(0x0000008000000000)
@@ -113,7 +113,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
#define CPU_FTR_16M_PAGE ASM_CONST(0x0)
#define CPU_FTR_TLBIEL ASM_CONST(0x0)
#define CPU_FTR_NOEXECUTE ASM_CONST(0x0)
-#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0)
#define CPU_FTR_IABR ASM_CONST(0x0)
#define CPU_FTR_MMCRA ASM_CONST(0x0)
#define CPU_FTR_CTRL ASM_CONST(0x0)
@@ -273,18 +272,21 @@ enum {
CPU_FTRS_POWER3_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
CPU_FTRS_POWER4_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_NODSISRALIGN,
CPU_FTRS_970_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_MAYBE_CAN_NAP,
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN,
CPU_FTRS_8XX = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
- CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
- CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
- CPU_FTRS_E200 = CPU_FTR_USE_TB,
- CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
+ CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+ CPU_FTR_NODSISRALIGN,
+ CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+ CPU_FTR_NODSISRALIGN,
+ CPU_FTRS_E200 = CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN,
+ CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+ CPU_FTR_NODSISRALIGN,
CPU_FTRS_E500_2 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_BIG_PHYS,
- CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON,
+ CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN,
+ CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN,
#ifdef __powerpc64__
CPU_FTRS_POWER3 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
CPU_FTR_HPTE_TABLE | CPU_FTR_IABR,
diff --git a/include/asm-powerpc/delay.h b/include/asm-powerpc/delay.h
index 1492aa9ab716414aa98b17dec31f5840e0a37b02..54fe1f4f8fd069bdaa121aa6bd90e7e855f2e8eb 100644
--- a/include/asm-powerpc/delay.h
+++ b/include/asm-powerpc/delay.h
@@ -13,43 +13,7 @@
* Anton Blanchard.
*/
-extern unsigned long tb_ticks_per_usec;
-
-#ifdef CONFIG_PPC64
-/* define these here to prevent circular dependencies */
-/* these instructions control the thread priority on multi-threaded cpus */
-#define __HMT_low() asm volatile("or 1,1,1")
-#define __HMT_medium() asm volatile("or 2,2,2")
-#else
-#define __HMT_low()
-#define __HMT_medium()
-#endif
-
-#define __barrier() asm volatile("" ::: "memory")
-
-static inline unsigned long __get_tb(void)
-{
- unsigned long rval;
-
- asm volatile("mftb %0" : "=r" (rval));
- return rval;
-}
-
-static inline void __delay(unsigned long loops)
-{
- unsigned long start = __get_tb();
-
- while((__get_tb() - start) < loops)
- __HMT_low();
- __HMT_medium();
- __barrier();
-}
-
-static inline void udelay(unsigned long usecs)
-{
- unsigned long loops = tb_ticks_per_usec * usecs;
-
- __delay(loops);
-}
+extern void __delay(unsigned long loops);
+extern void udelay(unsigned long usecs);
#endif /* _ASM_POWERPC_DELAY_H */
diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h
index 89f26ab31908df6e72932291568340243ba7b4b3..f8633aafe4baa5d000e608b35b92e5f13be45311 100644
--- a/include/asm-powerpc/eeh.h
+++ b/include/asm-powerpc/eeh.h
@@ -30,6 +30,8 @@ struct device_node;
#ifdef CONFIG_EEH
+extern int eeh_subsystem_enabled;
+
/* Values for eeh_mode bits in device_node */
#define EEH_MODE_SUPPORTED (1<<0)
#define EEH_MODE_NOCHECK (1<<1)
@@ -75,7 +77,7 @@ void eeh_remove_device(struct pci_dev *);
* If this macro yields TRUE, the caller relays to eeh_check_failure()
* which does further tests out of line.
*/
-#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0)
+#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled)
/*
* Reads from a device which has been isolated by EEH will return
diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h
index c16f106b5373f0baa4a71b09952ae4113f938d0e..1e6e7846824fca9f0d23fe7f6384a9072f38faaf 100644
--- a/include/asm-powerpc/page_64.h
+++ b/include/asm-powerpc/page_64.h
@@ -86,7 +86,11 @@ static inline void copy_page(void *to, void *from)
extern u64 ppc64_pft_size;
/* Large pages size */
+#ifdef CONFIG_HUGETLB_PAGE
extern unsigned int HPAGE_SHIFT;
+#else
+#define HPAGE_SHIFT PAGE_SHIFT
+#endif
#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h
index 015d28746e1b0a8e0590db4fcd80c991570d2295..db8095cbe09bb0d59ba8432974ecfbef426ad9c9 100644
--- a/include/asm-powerpc/topology.h
+++ b/include/asm-powerpc/topology.h
@@ -41,6 +41,10 @@ static inline int node_to_first_cpu(int node)
.cache_hot_time = (10*1000000), \
.cache_nice_tries = 1, \
.per_cpu_gain = 100, \
+ .busy_idx = 3, \
+ .idle_idx = 1, \
+ .newidle_idx = 2, \
+ .wake_idx = 1, \
.flags = SD_LOAD_BALANCE \
| SD_BALANCE_EXEC \
| SD_BALANCE_NEWIDLE \
diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
index 43d2ebbc7748fba88bbd0dfbd6cbeb4ca6daa17e..b638b87cebe3381a0312e34bd7618810463e0df0 100644
--- a/include/asm-ppc/cpm2.h
+++ b/include/asm-ppc/cpm2.h
@@ -1091,5 +1091,7 @@ typedef struct im_idma {
#define CPM_IMMR_OFFSET 0x101a8
#endif
+#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */
+
#endif /* __CPM2__ */
#endif /* __KERNEL__ */
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index b93fd8c1d8847f6488667f60512ee3a9a70bb077..cde2f4f4f501775d968a343d75ec8a2b0859c7e5 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -1042,7 +1042,7 @@ static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
case IEEE80211_4ADDR_LEN:
return ((struct ieee80211_hdr_4addr *)hdr)->payload;
}
-
+ return NULL;
}
static inline int ieee80211_is_ofdm_rate(u8 rate)
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index eb6719c50b4e0deb4546e7479a42bb82a9db90e4..88c28d476550d004fe3232ab284d54473f5885a9 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -80,6 +80,7 @@ struct rcu_torture {
struct rcu_head rtort_rcu;
int rtort_pipe_count;
struct list_head rtort_free;
+ int rtort_mbtest;
};
static int fullstop = 0; /* stop generating callbacks at test end. */
@@ -96,6 +97,8 @@ static atomic_t rcu_torture_wcount[RCU_TORTURE_PIPE_LEN + 1];
atomic_t n_rcu_torture_alloc;
atomic_t n_rcu_torture_alloc_fail;
atomic_t n_rcu_torture_free;
+atomic_t n_rcu_torture_mberror;
+atomic_t n_rcu_torture_error;
/*
* Allocate an element from the rcu_tortures pool.
@@ -145,9 +148,10 @@ rcu_torture_cb(struct rcu_head *p)
if (i > RCU_TORTURE_PIPE_LEN)
i = RCU_TORTURE_PIPE_LEN;
atomic_inc(&rcu_torture_wcount[i]);
- if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN)
+ if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) {
+ rp->rtort_mbtest = 0;
rcu_torture_free(rp);
- else
+ } else
call_rcu(p, rcu_torture_cb);
}
@@ -206,6 +210,7 @@ rcu_torture_writer(void *arg)
rp->rtort_pipe_count = 0;
udelay(rcu_random(&rand) & 0x3ff);
old_rp = rcu_torture_current;
+ rp->rtort_mbtest = 1;
rcu_assign_pointer(rcu_torture_current, rp);
smp_wmb();
if (old_rp != NULL) {
@@ -252,6 +257,8 @@ rcu_torture_reader(void *arg)
schedule_timeout_interruptible(HZ);
continue;
}
+ if (p->rtort_mbtest == 0)
+ atomic_inc(&n_rcu_torture_mberror);
udelay(rcu_random(&rand) & 0x7f);
preempt_disable();
pipe_count = p->rtort_pipe_count;
@@ -300,16 +307,22 @@ rcu_torture_printk(char *page)
}
cnt += sprintf(&page[cnt], "rcutorture: ");
cnt += sprintf(&page[cnt],
- "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d",
+ "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d "
+ "rtmbe: %d",
rcu_torture_current,
rcu_torture_current_version,
list_empty(&rcu_torture_freelist),
atomic_read(&n_rcu_torture_alloc),
atomic_read(&n_rcu_torture_alloc_fail),
- atomic_read(&n_rcu_torture_free));
+ atomic_read(&n_rcu_torture_free),
+ atomic_read(&n_rcu_torture_mberror));
+ if (atomic_read(&n_rcu_torture_mberror) != 0)
+ cnt += sprintf(&page[cnt], " !!!");
cnt += sprintf(&page[cnt], "\nrcutorture: ");
- if (i > 1)
+ if (i > 1) {
cnt += sprintf(&page[cnt], "!!! ");
+ atomic_inc(&n_rcu_torture_error);
+ }
cnt += sprintf(&page[cnt], "Reader Pipe: ");
for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
cnt += sprintf(&page[cnt], " %ld", pipesummary[i]);
@@ -400,7 +413,9 @@ rcu_torture_cleanup(void)
for (i = 0; i < RCU_TORTURE_PIPE_LEN; i++)
synchronize_rcu();
rcu_torture_stats_print(); /* -After- the stats thread is stopped! */
- PRINTK_STRING("--- End of test");
+ printk(KERN_ALERT TORTURE_FLAG
+ "--- End of test: %s\n",
+ atomic_read(&n_rcu_torture_error) == 0 ? "SUCCESS" : "FAILURE");
}
static int
@@ -425,6 +440,7 @@ rcu_torture_init(void)
INIT_LIST_HEAD(&rcu_torture_freelist);
for (i = 0; i < sizeof(rcu_tortures) / sizeof(rcu_tortures[0]); i++) {
+ rcu_tortures[i].rtort_mbtest = 0;
list_add_tail(&rcu_tortures[i].rtort_free,
&rcu_torture_freelist);
}
@@ -436,6 +452,8 @@ rcu_torture_init(void)
atomic_set(&n_rcu_torture_alloc, 0);
atomic_set(&n_rcu_torture_alloc_fail, 0);
atomic_set(&n_rcu_torture_free, 0);
+ atomic_set(&n_rcu_torture_mberror, 0);
+ atomic_set(&n_rcu_torture_error, 0);
for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
atomic_set(&rcu_torture_wcount[i], 0);
for_each_cpu(cpu) {
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 74138c9a22b982a9a74fb4076e41826a0d56c3b5..0166ea15c9ee8d61f08ddc6e100de841e59205c7 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -750,6 +750,7 @@ int clear_page_dirty_for_io(struct page *page)
}
return TestClearPageDirty(page);
}
+EXPORT_SYMBOL(clear_page_dirty_for_io);
int test_clear_page_writeback(struct page *page)
{
diff --git a/net/ipv4/netfilter/ip_conntrack_ftp.c b/net/ipv4/netfilter/ip_conntrack_ftp.c
index d77d6b3f5f80163e8b3f97b3a6121257431ca914..59e12b02b22ce82d31ae0c5769bdbce783ca5e24 100644
--- a/net/ipv4/netfilter/ip_conntrack_ftp.c
+++ b/net/ipv4/netfilter/ip_conntrack_ftp.c
@@ -29,9 +29,9 @@ static char *ftp_buffer;
static DEFINE_SPINLOCK(ip_ftp_lock);
#define MAX_PORTS 8
-static short ports[MAX_PORTS];
+static unsigned short ports[MAX_PORTS];
static int ports_c;
-module_param_array(ports, short, &ports_c, 0400);
+module_param_array(ports, ushort, &ports_c, 0400);
static int loose;
module_param(loose, int, 0600);
diff --git a/net/ipv4/netfilter/ip_conntrack_irc.c b/net/ipv4/netfilter/ip_conntrack_irc.c
index 15457415a4f32b45bd5f9883956cf308a86be5fd..2dea1db14406a9a39b622dee4618b4401f4f86e6 100644
--- a/net/ipv4/netfilter/ip_conntrack_irc.c
+++ b/net/ipv4/netfilter/ip_conntrack_irc.c
@@ -34,7 +34,7 @@
#include <linux/moduleparam.h>
#define MAX_PORTS 8
-static short ports[MAX_PORTS];
+static unsigned short ports[MAX_PORTS];
static int ports_c;
static int max_dcc_channels = 8;
static unsigned int dcc_timeout = 300;
@@ -52,7 +52,7 @@ EXPORT_SYMBOL_GPL(ip_nat_irc_hook);
MODULE_AUTHOR("Harald Welte <laforge@netfilter.org>");
MODULE_DESCRIPTION("IRC (DCC) connection tracking helper");
MODULE_LICENSE("GPL");
-module_param_array(ports, short, &ports_c, 0400);
+module_param_array(ports, ushort, &ports_c, 0400);
MODULE_PARM_DESC(ports, "port numbers of IRC servers");
module_param(max_dcc_channels, int, 0400);
MODULE_PARM_DESC(max_dcc_channels, "max number of expected DCC channels per IRC session");
diff --git a/net/ipv4/netfilter/ip_conntrack_tftp.c b/net/ipv4/netfilter/ip_conntrack_tftp.c
index a78736b8525d1d865fb0c2ae9a2e28dd3d7d2cad..d3c5a371f993e390a5f6c521b649050be8d950b9 100644
--- a/net/ipv4/netfilter/ip_conntrack_tftp.c
+++ b/net/ipv4/netfilter/ip_conntrack_tftp.c
@@ -26,9 +26,9 @@ MODULE_DESCRIPTION("tftp connection tracking helper");
MODULE_LICENSE("GPL");
#define MAX_PORTS 8
-static short ports[MAX_PORTS];
+static unsigned short ports[MAX_PORTS];
static int ports_c;
-module_param_array(ports, short, &ports_c, 0400);
+module_param_array(ports, ushort, &ports_c, 0400);
MODULE_PARM_DESC(ports, "port numbers of tftp servers");
#if 0
diff --git a/net/ipv4/tcp_highspeed.c b/net/ipv4/tcp_highspeed.c
index 82b3c189bd7dd49b8bdf262bfcfb60f63fe4adbc..63cf7e54084791c54d5def202ef124ae70eee770 100644
--- a/net/ipv4/tcp_highspeed.c
+++ b/net/ipv4/tcp_highspeed.c
@@ -111,7 +111,7 @@ static void hstcp_init(struct sock *sk)
}
static void hstcp_cong_avoid(struct sock *sk, u32 adk, u32 rtt,
- u32 in_flight, u32 pkts_acked)
+ u32 in_flight, int data_acked)
{
struct tcp_sock *tp = tcp_sk(sk);
struct hstcp *ca = inet_csk_ca(sk);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 9a71a8d1078a248165378073058e47f2ff4ab1d6..a7a537b5059537bb7d7fd5291323277333c22cb7 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1732,7 +1732,7 @@ int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb)
/*
* 2. allocate and initialize walker.
*/
- w = kmalloc(sizeof(*w), GFP_KERNEL);
+ w = kmalloc(sizeof(*w), GFP_ATOMIC);
if (w == NULL)
return -ENOMEM;
RT6_TRACE("dump<%p", w);
diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c
index 91fb6bc1b11690810272b8d806d565e21d7e4eb6..8169f24ed33e51649c9c8c80f27f3fa9dc88c3a7 100644
--- a/net/llc/llc_c_ac.c
+++ b/net/llc/llc_c_ac.c
@@ -995,8 +995,8 @@ static int llc_conn_ac_inc_npta_value(struct sock *sk, struct sk_buff *skb)
llc->dec_step = 0;
llc->dec_cntr = llc->inc_cntr = 2;
++llc->npta;
- if (llc->npta > ~LLC_2_SEQ_NBR_MODULO)
- llc->npta = ~LLC_2_SEQ_NBR_MODULO ;
+ if (llc->npta > (u8) ~LLC_2_SEQ_NBR_MODULO)
+ llc->npta = (u8) ~LLC_2_SEQ_NBR_MODULO;
} else
--llc->inc_cntr;
return 0;
@@ -1086,8 +1086,8 @@ int llc_conn_ac_inc_tx_win_size(struct sock *sk, struct sk_buff *skb)
struct llc_sock *llc = llc_sk(sk);
llc->k += 1;
- if (llc->k > ~LLC_2_SEQ_NBR_MODULO)
- llc->k = ~LLC_2_SEQ_NBR_MODULO ;
+ if (llc->k > (u8) ~LLC_2_SEQ_NBR_MODULO)
+ llc->k = (u8) ~LLC_2_SEQ_NBR_MODULO;
return 0;
}
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index 7f34e7fd767cd9e123186712779b0c0335f20ee6..55cd5327fbd79e4c75ff45152e0c0c20d5b1552d 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -40,9 +40,10 @@ config NET_SCHED
The available schedulers are listed in the following questions; you
can say Y to as many as you like. If unsure, say N now.
+if NET_SCHED
+
choice
prompt "Packet scheduler clock source"
- depends on NET_SCHED
default NET_SCH_CLK_JIFFIES
---help---
Packet schedulers need a monotonic clock that increments at a static
@@ -98,11 +99,9 @@ config NET_SCH_CLK_CPU
endchoice
comment "Queueing/Scheduling"
- depends on NET_SCHED
config NET_SCH_CBQ
tristate "Class Based Queueing (CBQ)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Class-Based Queueing (CBQ) packet
scheduling algorithm. This algorithm classifies the waiting packets
@@ -120,7 +119,6 @@ config NET_SCH_CBQ
config NET_SCH_HTB
tristate "Hierarchical Token Bucket (HTB)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Hierarchical Token Buckets (HTB)
packet scheduling algorithm. See
@@ -135,7 +133,6 @@ config NET_SCH_HTB
config NET_SCH_HFSC
tristate "Hierarchical Fair Service Curve (HFSC)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Hierarchical Fair Service Curve
(HFSC) packet scheduling algorithm.
@@ -145,7 +142,7 @@ config NET_SCH_HFSC
config NET_SCH_ATM
tristate "ATM Virtual Circuits (ATM)"
- depends on NET_SCHED && ATM
+ depends on ATM
---help---
Say Y here if you want to use the ATM pseudo-scheduler. This
provides a framework for invoking classifiers, which in turn
@@ -159,7 +156,6 @@ config NET_SCH_ATM
config NET_SCH_PRIO
tristate "Multi Band Priority Queueing (PRIO)"
- depends on NET_SCHED
---help---
Say Y here if you want to use an n-band priority queue packet
scheduler.
@@ -169,7 +165,6 @@ config NET_SCH_PRIO
config NET_SCH_RED
tristate "Random Early Detection (RED)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Random Early Detection (RED)
packet scheduling algorithm.
@@ -181,7 +176,6 @@ config NET_SCH_RED
config NET_SCH_SFQ
tristate "Stochastic Fairness Queueing (SFQ)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
packet scheduling algorithm .
@@ -193,7 +187,6 @@ config NET_SCH_SFQ
config NET_SCH_TEQL
tristate "True Link Equalizer (TEQL)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the True Link Equalizer (TLE) packet
scheduling algorithm. This queueing discipline allows the combination
@@ -206,7 +199,6 @@ config NET_SCH_TEQL
config NET_SCH_TBF
tristate "Token Bucket Filter (TBF)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Token Bucket Filter (TBF) packet
scheduling algorithm.
@@ -218,7 +210,6 @@ config NET_SCH_TBF
config NET_SCH_GRED
tristate "Generic Random Early Detection (GRED)"
- depends on NET_SCHED
---help---
Say Y here if you want to use the Generic Random Early Detection
(GRED) packet scheduling algorithm for some of your network devices
@@ -230,7 +221,6 @@ config NET_SCH_GRED
config NET_SCH_DSMARK
tristate "Differentiated Services marker (DSMARK)"
- depends on NET_SCHED
---help---
Say Y if you want to schedule packets according to the
Differentiated Services architecture proposed in RFC 2475.
@@ -242,7 +232,6 @@ config NET_SCH_DSMARK
config NET_SCH_NETEM
tristate "Network emulator (NETEM)"
- depends on NET_SCHED
---help---
Say Y if you want to emulate network delay, loss, and packet
re-ordering. This is often useful to simulate networks when
@@ -255,7 +244,6 @@ config NET_SCH_NETEM
config NET_SCH_INGRESS
tristate "Ingress Qdisc"
- depends on NET_SCHED
---help---
Say Y here if you want to use classifiers for incoming packets.
If unsure, say Y.
@@ -264,14 +252,12 @@ config NET_SCH_INGRESS
module will be called sch_ingress.
comment "Classification"
- depends on NET_SCHED
config NET_CLS
boolean
config NET_CLS_BASIC
tristate "Elementary classification (BASIC)"
- depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to be able to classify packets using
@@ -282,7 +268,6 @@ config NET_CLS_BASIC
config NET_CLS_TCINDEX
tristate "Traffic-Control Index (TCINDEX)"
- depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to be able to classify packets based on
@@ -294,7 +279,6 @@ config NET_CLS_TCINDEX
config NET_CLS_ROUTE4
tristate "Routing decision (ROUTE)"
- depends NET_SCHED
select NET_CLS_ROUTE
select NET_CLS
---help---
@@ -306,11 +290,9 @@ config NET_CLS_ROUTE4
config NET_CLS_ROUTE
bool
- default n
config NET_CLS_FW
tristate "Netfilter mark (FW)"
- depends NET_SCHED
select NET_CLS
---help---
If you say Y here, you will be able to classify packets
@@ -321,7 +303,6 @@ config NET_CLS_FW
config NET_CLS_U32
tristate "Universal 32bit comparisons w/ hashing (U32)"
- depends NET_SCHED
select NET_CLS
---help---
Say Y here to be able to classify packetes using a universal
@@ -345,7 +326,6 @@ config CLS_U32_MARK
config NET_CLS_RSVP
tristate "IPv4 Resource Reservation Protocol (RSVP)"
- depends on NET_SCHED
select NET_CLS
select NET_ESTIMATOR
---help---
@@ -361,7 +341,6 @@ config NET_CLS_RSVP
config NET_CLS_RSVP6
tristate "IPv6 Resource Reservation Protocol (RSVP6)"
- depends on NET_SCHED
select NET_CLS
select NET_ESTIMATOR
---help---
@@ -377,7 +356,6 @@ config NET_CLS_RSVP6
config NET_EMATCH
bool "Extended Matches"
- depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to use extended matches on top of classifiers
@@ -456,7 +434,7 @@ config NET_EMATCH_TEXT
config NET_CLS_ACT
bool "Actions"
- depends on EXPERIMENTAL && NET_SCHED
+ depends on EXPERIMENTAL
select NET_ESTIMATOR
---help---
Say Y here if you want to use traffic control actions. Actions
@@ -539,7 +517,7 @@ config NET_ACT_SIMP
config NET_CLS_POLICE
bool "Traffic Policing (obsolete)"
- depends on NET_SCHED && NET_CLS_ACT!=y
+ depends on NET_CLS_ACT!=y
select NET_ESTIMATOR
---help---
Say Y here if you want to do traffic policing, i.e. strict
@@ -549,7 +527,7 @@ config NET_CLS_POLICE
config NET_CLS_IND
bool "Incoming device classification"
- depends on NET_SCHED && (NET_CLS_U32 || NET_CLS_FW)
+ depends on NET_CLS_U32 || NET_CLS_FW
---help---
Say Y here to extend the u32 and fw classifier to support
classification based on the incoming device. This option is
@@ -557,11 +535,12 @@ config NET_CLS_IND
config NET_ESTIMATOR
bool "Rate estimator"
- depends on NET_SCHED
---help---
Say Y here to allow using rate estimators to estimate the current
rate-of-flow for network devices, queues, etc. This module is
automaticaly selected if needed but can be selected manually for
statstical purposes.
+endif # NET_SCHED
+
endmenu