Merge tag 'arc-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC fixes/updates from Vineet Gupta

 - Missing reads{x}()/writes{x}() getting in the way of some drivers [Jose Abreu]

 - Builds defaulting to ARCv2 ISA based configsa [Kevin Hilman]

 - Misc fixes

* tag 'arc-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: io.h: Implement reads{x}()/writes{x}()
  ARC: change defconfig defaults to ARCv2
  arc: [devboards] Add support of NFSv3 ACL
  ARC: mm: fix uninitialised signal code in do_page_fault
  ARC: [plat-hsdk] Enable DW APB GPIO support
  ARCv2: boot log unaligned access in use
  ARC: IOC: panic if kernel was started with previously enabled IOC
  ARC: remove redundant 'default n' from Kconfig

arch/arc/Kconfig

@@ -109,7 +109,7 @@ endmenu
 
 choice
 	prompt "ARC Instruction Set"
-	default ISA_ARCOMPACT
+	default ISA_ARCV2
 
 config ISA_ARCOMPACT
 	bool "ARCompact ISA"
@@ -176,13 +176,11 @@ endchoice
 
 config CPU_BIG_ENDIAN
 	bool "Enable Big Endian Mode"
-	default n
 	help
 	  Build kernel for Big Endian Mode of ARC CPU
 
 config SMP
 	bool "Symmetric Multi-Processing"
-	default n
 	select ARC_MCIP if ISA_ARCV2
 	help
 	  This enables support for systems with more than one CPU.
@@ -254,7 +252,6 @@ config ARC_CACHE_PAGES
 config ARC_CACHE_VIPT_ALIASING
 	bool "Support VIPT Aliasing D$"
 	depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
-	default n
 
 endif	#ARC_CACHE
 
@@ -262,7 +259,6 @@ config ARC_HAS_ICCM
 	bool "Use ICCM"
 	help
 	  Single Cycle RAMS to store Fast Path Code
-	default n
 
 config ARC_ICCM_SZ
 	int "ICCM Size in KB"
@@ -273,7 +269,6 @@ config ARC_HAS_DCCM
 	bool "Use DCCM"
 	help
 	  Single Cycle RAMS to store Fast Path Data
-	default n
 
 config ARC_DCCM_SZ
 	int "DCCM Size in KB"
@@ -366,13 +361,11 @@ if ISA_ARCOMPACT
 
 config ARC_COMPACT_IRQ_LEVELS
 	bool "Setup Timer IRQ as high Priority"
-	default n
 	# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
 	depends on !SMP
 
 config ARC_FPU_SAVE_RESTORE
 	bool "Enable FPU state persistence across context switch"
-	default n
 	help
 	  Double Precision Floating Point unit had dedicated regs which
 	  need to be saved/restored across context-switch.
@@ -453,7 +446,6 @@ config HIGHMEM
 
 config ARC_HAS_PAE40
 	bool "Support for the 40-bit Physical Address Extension"
-	default n
 	depends on ISA_ARCV2
 	select HIGHMEM
 	select PHYS_ADDR_T_64BIT
@@ -496,7 +488,6 @@ config HZ
 
 config ARC_METAWARE_HLINK
 	bool "Support for Metaware debugger assisted Host access"
-	default n
 	help
 	  This options allows a Linux userland apps to directly access
 	  host file system (open/creat/read/write etc) with help from
@@ -524,13 +515,11 @@ config ARC_DW2_UNWIND
 
 config ARC_DBG_TLB_PARANOIA
 	bool "Paranoia Checks in Low Level TLB Handlers"
-	default n
 
 endif
 
 config ARC_UBOOT_SUPPORT
 	bool "Support uboot arg Handling"
-	default n
 	help
 	  ARC Linux by default checks for uboot provided args as pointers to
 	  external cmdline or DTB. This however breaks in absence of uboot,

arch/arc/Makefile

@@ -6,7 +6,7 @@
 # published by the Free Software Foundation.
 #
 
-KBUILD_DEFCONFIG := nsim_700_defconfig
+KBUILD_DEFCONFIG := nsim_hs_defconfig
 
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
 cflags-$(CONFIG_ISA_ARCOMPACT)	+= -mA7

arch/arc/boot/dts/hsdk.dts

@@ -222,6 +222,21 @@
 			bus-width = <4>;
 			dma-coherent;
 		};
+
+		gpio: gpio@3000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio_port_a: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+			};
+		};
 	};
 
 	memory@80000000 {

arch/arc/configs/axs101_defconfig

@@ -14,6 +14,7 @@ CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -95,6 +96,7 @@ CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set

arch/arc/configs/axs103_defconfig

@@ -94,6 +94,7 @@ CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set

arch/arc/configs/axs103_smp_defconfig

@@ -97,6 +97,7 @@ CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set

arch/arc/configs/hsdk_defconfig

@@ -45,6 +45,9 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_DWAPB=y
 # CONFIG_HWMON is not set
 CONFIG_DRM=y
 # CONFIG_DRM_FBDEV_EMULATION is not set
@@ -65,6 +68,7 @@ CONFIG_EXT3_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set

arch/arc/configs/nps_defconfig

@@ -15,6 +15,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@@ -73,6 +74,7 @@ CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set

arch/arc/configs/nsim_700_defconfig

@@ -15,6 +15,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_LBDAF is not set

arch/arc/configs/nsimosci_defconfig

@@ -15,6 +15,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_LBDAF is not set
@@ -66,5 +67,6 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set

arch/arc/configs/nsimosci_hs_defconfig

@@ -65,5 +65,6 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set

arch/arc/configs/nsimosci_hs_smp_defconfig

@@ -76,6 +76,7 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FTRACE=y

arch/arc/configs/tb10x_defconfig

@@ -19,6 +19,7 @@ CONFIG_KALLSYMS_ALL=y
 # CONFIG_AIO is not set
 CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y

arch/arc/configs/vdk_hs38_defconfig

@@ -85,6 +85,7 @@ CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set

arch/arc/configs/vdk_hs38_smp_defconfig

@@ -90,6 +90,7 @@ CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set

arch/arc/include/asm/cache.h

@@ -113,7 +113,9 @@ extern unsigned long perip_base, perip_end;
 
 /* IO coherency related Auxiliary registers */
 #define ARC_REG_IO_COH_ENABLE	0x500
+#define ARC_IO_COH_ENABLE_BIT	BIT(0)
 #define ARC_REG_IO_COH_PARTIAL	0x501
+#define ARC_IO_COH_PARTIAL_BIT	BIT(0)
 #define ARC_REG_IO_COH_AP0_BASE	0x508
 #define ARC_REG_IO_COH_AP0_SIZE	0x509
 

arch/arc/include/asm/io.h

@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
+#include <asm/unaligned.h>
 
 #ifdef CONFIG_ISA_ARCV2
 #include <asm/barrier.h>
@@ -94,6 +95,42 @@ static inline u32 __raw_readl(const volatile void __iomem *addr)
 	return w;
 }
 
+/*
+ * {read,write}s{b,w,l}() repeatedly access the same IO address in
+ * native endianness in 8-, 16-, 32-bit chunks {into,from} memory,
+ * @count times
+ */
+#define __raw_readsx(t,f) \
+static inline void __raw_reads##f(const volatile void __iomem *addr,	\
+				  void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			*buf++ = x;					\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			put_unaligned(x, buf++);			\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_readsb __raw_readsb
+__raw_readsx(8, b)
+#define __raw_readsw __raw_readsw
+__raw_readsx(16, w)
+#define __raw_readsl __raw_readsl
+__raw_readsx(32, l)
+
 #define __raw_writeb __raw_writeb
 static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
 {
@@ -126,6 +163,35 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 
 }
 
+#define __raw_writesx(t,f)						\
+static inline void __raw_writes##f(volatile void __iomem *addr, 	\
+				   const void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	const u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			__raw_write##f(*buf++, addr);			\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			__raw_write##f(get_unaligned(buf++), addr);	\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_writesb __raw_writesb
+__raw_writesx(8, b)
+#define __raw_writesw __raw_writesw
+__raw_writesx(16, w)
+#define __raw_writesl __raw_writesl
+__raw_writesx(32, l)
+
 /*
  * MMIO can also get buffered/optimized in micro-arch, so barriers needed
  * Based on ARM model for the typical use case
@@ -141,10 +207,16 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 #define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
 #define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
 #define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+#define readsb(p,d,l)		({ __raw_readsb(p,d,l); __iormb(); })
+#define readsw(p,d,l)		({ __raw_readsw(p,d,l); __iormb(); })
+#define readsl(p,d,l)		({ __raw_readsl(p,d,l); __iormb(); })
 
 #define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
 #define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
 #define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
+#define writesb(p,d,l)		({ __iowmb(); __raw_writesb(p,d,l); })
+#define writesw(p,d,l)		({ __iowmb(); __raw_writesw(p,d,l); })
+#define writesl(p,d,l)		({ __iowmb(); __raw_writesl(p,d,l); })
 
 /*
  * Relaxed API for drivers which can handle barrier ordering themselves

arch/arc/kernel/setup.c

@@ -243,7 +243,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 {
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
 	struct bcr_identity *core = &cpu->core;
-	int i, n = 0;
+	int i, n = 0, ua = 0;
 
 	FIX_PTR(cpu);
 
@@ -263,10 +263,13 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 		       IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
 		       IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT));
 
-	n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
+#ifdef __ARC_UNALIGNED__
+	ua = 1;
+#endif
+	n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s%s",
 			   IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
 			   IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
-			   IS_AVAIL1(cpu->isa.unalign, "unalign (not used)"));
+			   IS_AVAIL1(cpu->isa.unalign, "unalign "), IS_USED_RUN(ua));
 
 	if (i)
 		n += scnprintf(buf + n, len - n, "\n\t\t: ");

arch/arc/mm/cache.c

@@ -1144,6 +1144,20 @@ noinline void __init arc_ioc_setup(void)
 {
 	unsigned int ioc_base, mem_sz;
 
+	/*
+	 * If IOC was already enabled (due to bootloader) it technically needs to
+	 * be reconfigured with aperture base,size corresponding to Linux memory map
+	 * which will certainly be different than uboot's. But disabling and
+	 * reenabling IOC when DMA might be potentially active is tricky business.
+	 * To avoid random memory issues later, just panic here and ask user to
+	 * upgrade bootloader to one which doesn't enable IOC
+	 */
+	if (read_aux_reg(ARC_REG_IO_COH_ENABLE) & ARC_IO_COH_ENABLE_BIT)
+		panic("IOC already enabled, please upgrade bootloader!\n");
+
+	if (!ioc_enable)
+		return;
+
 	/*
 	 * As for today we don't support both IOC and ZONE_HIGHMEM enabled
 	 * simultaneously. This happens because as of today IOC aperture covers
@@ -1187,8 +1201,8 @@ noinline void __init arc_ioc_setup(void)
 		panic("IOC Aperture start must be aligned to the size of the aperture");
 
 	write_aux_reg(ARC_REG_IO_COH_AP0_BASE, ioc_base >> 12);
-	write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
-	write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
+	write_aux_reg(ARC_REG_IO_COH_PARTIAL, ARC_IO_COH_PARTIAL_BIT);
+	write_aux_reg(ARC_REG_IO_COH_ENABLE, ARC_IO_COH_ENABLE_BIT);
 
 	/* Re-enable L1 dcache */
 	__dc_enable();
@@ -1265,7 +1279,7 @@ void __init arc_cache_init_master(void)
 	if (is_isa_arcv2() && l2_line_sz && !slc_enable)
 		arc_slc_disable();
 
-	if (is_isa_arcv2() && ioc_enable)
+	if (is_isa_arcv2() && ioc_exists)
 		arc_ioc_setup();
 
 	if (is_isa_arcv2() && l2_line_sz && slc_enable) {

arch/arc/mm/fault.c

@@ -66,7 +66,7 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	struct vm_area_struct *vma = NULL;
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
-	int si_code;
+	int si_code = 0;
 	int ret;
 	vm_fault_t fault;
 	int write = regs->ecr_cause & ECR_C_PROTV_STORE;  /* ST/EX */