diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index adf20b2bdf71504935cea1dca96a17e03393ad98..fbc198d5dd39eaee1838a37368a7c8025938f530 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -40,24 +40,36 @@ Required properties:
 		"ref" for 19.2 MHz ref clk,
 		"com_aux" for phy common block aux clock,
 		"ref_aux" for phy reference aux clock,
+
+		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"aux", "cfg_ahb", "ref".
 		For "qcom,msm8996-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref".
-		For "qcom,qmp-v3-usb3-phy" must contain:
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
+			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
 			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-ufs-phy" must contain:
+			"ref", "ref_aux".
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
  - reset-names: "phy" for reset of phy block,
 		"common" for phy common block reset,
-		"cfg" for phy's ahb cfg block reset (Optional).
+		"cfg" for phy's ahb cfg block reset.
+
+		For "qcom,ipq8074-qmp-pcie-phy" must contain:
+			"phy", "common".
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
-		 "phy", "common", "cfg".
+			"phy", "common", "cfg".
 		For "qcom,msm8996-qmp-usb3-phy" must contain
-		 "phy", "common".
-		For "qcom,ipq8074-qmp-pcie-phy" must contain:
-		 "phy", "common".
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-ufs-phy": no resets are listed.
 
  - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
  - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -79,9 +91,10 @@ Required properties for child node:
 
  - #phy-cells: must be 0
 
+Required properties child node of pcie and usb3 qmp phys:
  - clocks: a list of phandles and clock-specifier pairs,
 	   one for each entry in clock-names.
- - clock-names: Must contain following for pcie and usb qmp phys:
+ - clock-names: Must contain following:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
  - clock-output-names: Name of the PHY clock that will be the parent for
 		       the above pipe clock.
@@ -91,9 +104,11 @@ Required properties for child node:
 			(or)
 		  "pcie20_phy1_pipe_clk"
 
+Required properties for child node of PHYs with lane reset, AKA:
+	"qcom,msm8996-qmp-pcie-phy"
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
- - reset-names: Must contain following for pcie qmp phys:
+ - reset-names: Must contain following:
 		 "lane<lane-number>" for reset specific to each lane.
 
 Example:
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 9ce531194f8af04c9bc96e2b387ca9ba0b6af3a5..6d4b44b569bc78e7f3548825ddf4522c183bbd7b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -231,6 +231,7 @@ static const struct qusb2_phy_cfg sdm845_phy_cfg = {
 	.mask_core_ready = CORE_READY_STATUS,
 	.has_pll_override = true,
 	.autoresume_en	  = BIT(0),
+	.update_tune1_with_efuse = true,
 };
 
 static const char * const qusb2_phy_vreg_names[] = {
@@ -402,10 +403,10 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 
 	/*
 	 * Read efuse register having TUNE2/1 parameter's high nibble.
-	 * If efuse register shows value as 0x0, or if we fail to find
-	 * a valid efuse register settings, then use default value
-	 * as 0xB for high nibble that we have already set while
-	 * configuring phy.
+	 * If efuse register shows value as 0x0 (indicating value is not
+	 * fused), or if we fail to find a valid efuse register setting,
+	 * then use default value for high nibble that we have already
+	 * set while configuring the phy.
 	 */
 	val = nvmem_cell_read(qphy->cell, NULL);
 	if (IS_ERR(val) || !val[0]) {
@@ -415,12 +416,13 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 
 	/* Fused TUNE1/2 value is the higher nibble only */
 	if (cfg->update_tune1_with_efuse)
-		qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
-			      val[0] << 0x4);
+		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
+				 val[0] << HSTX_TRIM_SHIFT,
+				 HSTX_TRIM_MASK);
 	else
-		qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
-			      val[0] << 0x4);
-
+		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
+				 val[0] << HSTX_TRIM_SHIFT,
+				 HSTX_TRIM_MASK);
 }
 
 static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode)
diff --git a/drivers/phy/socionext/Kconfig b/drivers/phy/socionext/Kconfig
index 467e8147972b0510cc285e972768e5f1e15ca212..9c85231a6dbcc856254fd75208bbe34d1784a7fb 100644
--- a/drivers/phy/socionext/Kconfig
+++ b/drivers/phy/socionext/Kconfig
@@ -26,7 +26,8 @@ config PHY_UNIPHIER_USB3
 
 config PHY_UNIPHIER_PCIE
 	tristate "Uniphier PHY driver for PCIe controller"
-	depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && HAS_IOMEM
 	default PCIE_UNIPHIER
 	select GENERIC_PHY
 	help
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f9ff03e6af93e7e41acfbcdcb2154dc3a81bbe03..0690fcff0ea23437e9ae4478c604d38c9cd870bf 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -209,6 +209,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Microsoft LifeCam-VX700 v2.0 */
 	{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */
+	{ USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */
 	{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
 	{ USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT },
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 9faad896b3a135e86a6d4aebae3678fbc20994d7..9f92ee03dde7048deaca902430ae60c06018c098 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1470,9 +1470,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
 		unsigned transfer_in_flight;
 		unsigned started;
 
-		if (dep->flags & DWC3_EP_STALL)
-			return 0;
-
 		if (dep->number > 1)
 			trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
 		else
@@ -1494,8 +1491,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
 		else
 			dep->flags |= DWC3_EP_STALL;
 	} else {
-		if (!(dep->flags & DWC3_EP_STALL))
-			return 0;
 
 		ret = dwc3_send_clear_stall_ep_cmd(dep);
 		if (ret)
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 1000d864929c3569162e49d83058f29eb3310706..0f026d445e316aec85c3dbcdbcb79700e39401ed 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -401,12 +401,12 @@ static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n)
 static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
 {
 	struct usb_request	*req;
-	struct usb_request	*tmp;
 	unsigned long		flags;
 
 	/* fill unused rxq slots with some skb */
 	spin_lock_irqsave(&dev->req_lock, flags);
-	list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) {
+	while (!list_empty(&dev->rx_reqs)) {
+		req = list_first_entry(&dev->rx_reqs, struct usb_request, list);
 		list_del_init(&req->list);
 		spin_unlock_irqrestore(&dev->req_lock, flags);
 
@@ -1125,7 +1125,6 @@ void gether_disconnect(struct gether *link)
 {
 	struct eth_dev		*dev = link->ioport;
 	struct usb_request	*req;
-	struct usb_request	*tmp;
 
 	WARN_ON(!dev);
 	if (!dev)
@@ -1142,7 +1141,8 @@ void gether_disconnect(struct gether *link)
 	 */
 	usb_ep_disable(link->in_ep);
 	spin_lock(&dev->req_lock);
-	list_for_each_entry_safe(req, tmp, &dev->tx_reqs, list) {
+	while (!list_empty(&dev->tx_reqs)) {
+		req = list_first_entry(&dev->tx_reqs, struct usb_request, list);
 		list_del(&req->list);
 
 		spin_unlock(&dev->req_lock);
@@ -1154,7 +1154,8 @@ void gether_disconnect(struct gether *link)
 
 	usb_ep_disable(link->out_ep);
 	spin_lock(&dev->req_lock);
-	list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) {
+	while (!list_empty(&dev->rx_reqs)) {
+		req = list_first_entry(&dev->rx_reqs, struct usb_request, list);
 		list_del(&req->list);
 
 		spin_unlock(&dev->req_lock);
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 3a16431da3211c470db38e5e2980996142073b65..fcf13ef33b312020d744cd99898294f02c1ba72a 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2033,6 +2033,7 @@ static inline int machine_without_vbus_sense(void)
 {
 	return machine_is_omap_innovator()
 		|| machine_is_omap_osk()
+		|| machine_is_omap_palmte()
 		|| machine_is_sx1()
 		/* No known omap7xx boards with vbus sense */
 		|| cpu_is_omap7xx();
@@ -2041,7 +2042,7 @@ static inline int machine_without_vbus_sense(void)
 static int omap_udc_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver)
 {
-	int		status = -ENODEV;
+	int		status;
 	struct omap_ep	*ep;
 	unsigned long	flags;
 
@@ -2079,6 +2080,7 @@ static int omap_udc_start(struct usb_gadget *g,
 			goto done;
 		}
 	} else {
+		status = 0;
 		if (can_pullup(udc))
 			pullup_enable(udc);
 		else
@@ -2593,9 +2595,22 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 
 static void omap_udc_release(struct device *dev)
 {
-	complete(udc->done);
+	pullup_disable(udc);
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
+		usb_put_phy(udc->transceiver);
+		udc->transceiver = NULL;
+	}
+	omap_writew(0, UDC_SYSCON1);
+	remove_proc_file();
+	if (udc->dc_clk) {
+		if (udc->clk_requested)
+			omap_udc_enable_clock(0);
+		clk_put(udc->hhc_clk);
+		clk_put(udc->dc_clk);
+	}
+	if (udc->done)
+		complete(udc->done);
 	kfree(udc);
-	udc = NULL;
 }
 
 static int
@@ -2627,6 +2642,7 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
 	udc->gadget.max_speed = USB_SPEED_FULL;
 	udc->gadget.name = driver_name;
+	udc->gadget.quirk_ep_out_aligned_size = 1;
 	udc->transceiver = xceiv;
 
 	/* ep0 is special; put it right after the SETUP buffer */
@@ -2867,8 +2883,8 @@ static int omap_udc_probe(struct platform_device *pdev)
 		udc->clr_halt = UDC_RESET_EP;
 
 	/* USB general purpose IRQ:  ep0, state changes, dma, etc */
-	status = request_irq(pdev->resource[1].start, omap_udc_irq,
-			0, driver_name, udc);
+	status = devm_request_irq(&pdev->dev, pdev->resource[1].start,
+				  omap_udc_irq, 0, driver_name, udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[1].start, status);
@@ -2876,20 +2892,20 @@ static int omap_udc_probe(struct platform_device *pdev)
 	}
 
 	/* USB "non-iso" IRQ (PIO for all but ep0) */
-	status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
-			0, "omap_udc pio", udc);
+	status = devm_request_irq(&pdev->dev, pdev->resource[2].start,
+				  omap_udc_pio_irq, 0, "omap_udc pio", udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[2].start, status);
-		goto cleanup2;
+		goto cleanup1;
 	}
 #ifdef	USE_ISO
-	status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
-			0, "omap_udc iso", udc);
+	status = devm_request_irq(&pdev->dev, pdev->resource[3].start,
+				  omap_udc_iso_irq, 0, "omap_udc iso", udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[3].start, status);
-		goto cleanup3;
+		goto cleanup1;
 	}
 #endif
 	if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
@@ -2900,23 +2916,8 @@ static int omap_udc_probe(struct platform_device *pdev)
 	}
 
 	create_proc_file();
-	status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
-			omap_udc_release);
-	if (status)
-		goto cleanup4;
-
-	return 0;
-
-cleanup4:
-	remove_proc_file();
-
-#ifdef	USE_ISO
-cleanup3:
-	free_irq(pdev->resource[2].start, udc);
-#endif
-
-cleanup2:
-	free_irq(pdev->resource[1].start, udc);
+	return usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
+					  omap_udc_release);
 
 cleanup1:
 	kfree(udc);
@@ -2943,42 +2944,15 @@ static int omap_udc_remove(struct platform_device *pdev)
 {
 	DECLARE_COMPLETION_ONSTACK(done);
 
-	if (!udc)
-		return -ENODEV;
-
-	usb_del_gadget_udc(&udc->gadget);
-	if (udc->driver)
-		return -EBUSY;
-
 	udc->done = &done;
 
-	pullup_disable(udc);
-	if (!IS_ERR_OR_NULL(udc->transceiver)) {
-		usb_put_phy(udc->transceiver);
-		udc->transceiver = NULL;
-	}
-	omap_writew(0, UDC_SYSCON1);
-
-	remove_proc_file();
-
-#ifdef	USE_ISO
-	free_irq(pdev->resource[3].start, udc);
-#endif
-	free_irq(pdev->resource[2].start, udc);
-	free_irq(pdev->resource[1].start, udc);
+	usb_del_gadget_udc(&udc->gadget);
 
-	if (udc->dc_clk) {
-		if (udc->clk_requested)
-			omap_udc_enable_clock(0);
-		clk_put(udc->hhc_clk);
-		clk_put(udc->dc_clk);
-	}
+	wait_for_completion(&done);
 
 	release_mem_region(pdev->resource[0].start,
 			pdev->resource[0].end - pdev->resource[0].start + 1);
 
-	wait_for_completion(&done);
-
 	return 0;
 }
 
diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h
index d17cd95b55bbdec3874c80d0d09b449c4f1f8fa1..6b2140f966ef87e751171373a5ab8e2756e5c33f 100644
--- a/drivers/usb/storage/unusual_realtek.h
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -27,4 +27,14 @@ UNUSUAL_DEV(0x0bda, 0x0159, 0x0000, 0x9999,
 		"USB Card Reader",
 		USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
 
+UNUSUAL_DEV(0x0bda, 0x0177, 0x0000, 0x9999,
+		"Realtek",
+		"USB Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
+UNUSUAL_DEV(0x0bda, 0x0184, 0x0000, 0x9999,
+		"Realtek",
+		"USB Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
 #endif  /* defined(CONFIG_USB_STORAGE_REALTEK) || ... */