diff --git a/MAINTAINERS b/MAINTAINERS
index e17ebf70b5480ecc232ce1f62aedf95a03b5f403..8b18d02a50cbff5bad5c782dc343089569ea9fd6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12014,6 +12014,12 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/
S: Supported
F: drivers/pci/controller/
+PCIE DRIVER FOR ANNAPURNA LABS
+M: Jonathan Chocron <jonnyc@amazon.com>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: drivers/pci/controller/dwc/pcie-al.c
+
PCIE DRIVER FOR AMLOGIC MESON
M: Yue Wang <yue.wang@Amlogic.com>
L: linux-pci@vger.kernel.org
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index a4e8432fc2fba456f9ca489bb2614df01537f72c..b42be067fb832d97d79051f37820296a32bf6203 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -52,6 +52,18 @@ struct mcfg_fixup {
static struct mcfg_fixup mcfg_quirks[] = {
/* { OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, */
+#define AL_ECAM(table_id, rev, seg, ops) \
+ { "AMAZON", table_id, rev, seg, MCFG_BUS_ANY, ops }
+
+ AL_ECAM("GRAVITON", 0, 0, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 1, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 2, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 3, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 4, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 5, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 6, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 7, &al_pcie_ops),
+
#define QCOM_ECAM32(seg) \
{ "QCOM ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops }
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index b5f3b83cc2b3a0eb177fd0e814eadf2d06c10ad7..b085dfd4fab77247e9e0b13299326044906f5b30 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -28,5 +28,6 @@ obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
# depending on whether ACPI, the DT driver, or both are enabled.
ifdef CONFIG_PCI
+obj-$(CONFIG_ARM64) += pcie-al.o
obj-$(CONFIG_ARM64) += pcie-hisi.o
endif
diff --git a/drivers/pci/controller/dwc/pcie-al.c b/drivers/pci/controller/dwc/pcie-al.c
new file mode 100644
index 0000000000000000000000000000000000000000..3ab58f0584a8e058f5c0dc9567f0cc8c2d16b4ac
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-al.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Amazon's Annapurna Labs IP (used in chips
+ * such as Graviton and Alpine)
+ *
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Author: Jonathan Chocron <jonnyc@amazon.com>
+ */
+
+#include <linux/pci.h>
+#include <linux/pci-ecam.h>
+#include <linux/pci-acpi.h>
+#include "../../pci.h"
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+
+struct al_pcie_acpi {
+ void __iomem *dbi_base;
+};
+
+static void __iomem *al_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int where)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ struct al_pcie_acpi *pcie = cfg->priv;
+ void __iomem *dbi_base = pcie->dbi_base;
+
+ if (bus->number == cfg->busr.start) {
+ /*
+ * The DW PCIe core doesn't filter out transactions to other
+ * devices/functions on the root bus num, so we do this here.
+ */
+ if (PCI_SLOT(devfn) > 0)
+ return NULL;
+ else
+ return dbi_base + where;
+ }
+
+ return pci_ecam_map_bus(bus, devfn, where);
+}
+
+static int al_pcie_init(struct pci_config_window *cfg)
+{
+ struct device *dev = cfg->parent;
+ struct acpi_device *adev = to_acpi_device(dev);
+ struct acpi_pci_root *root = acpi_driver_data(adev);
+ struct al_pcie_acpi *al_pcie;
+ struct resource *res;
+ int ret;
+
+ al_pcie = devm_kzalloc(dev, sizeof(*al_pcie), GFP_KERNEL);
+ if (!al_pcie)
+ return -ENOMEM;
+
+ res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL);
+ if (!res)
+ return -ENOMEM;
+
+ ret = acpi_get_rc_resources(dev, "AMZN0001", root->segment, res);
+ if (ret) {
+ dev_err(dev, "can't get rc dbi base address for SEG %d\n",
+ root->segment);
+ return ret;
+ }
+
+ dev_dbg(dev, "Root port dbi res: %pR\n", res);
+
+ al_pcie->dbi_base = devm_pci_remap_cfg_resource(dev, res);
+ if (IS_ERR(al_pcie->dbi_base)) {
+ long err = PTR_ERR(al_pcie->dbi_base);
+
+ dev_err(dev, "couldn't remap dbi base %pR (err:%ld)\n",
+ res, err);
+ return err;
+ }
+
+ cfg->priv = al_pcie;
+
+ return 0;
+}
+
+struct pci_ecam_ops al_pcie_ops = {
+ .bus_shift = 20,
+ .init = al_pcie_init,
+ .pci_ops = {
+ .map_bus = al_pcie_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+ }
+};
+
+#endif /* defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) */
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index 29efa09d686b2d8062b827f20b1f8b21d08ac20f..a73164c85e78b904bcbce317897c531a5130a6df 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -56,6 +56,7 @@ extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 1.x & 2.x */
extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */
extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 */
extern struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
+extern struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */
#endif
#ifdef CONFIG_PCI_HOST_COMMON