Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is a smaller update than the past few times, but with just over
  500 non-merge changesets still dwarfes the rest of the SoC tree.

  Three new SoC platforms get added, each one a follow-up to an existing
  product, and added here in combination with a reference platform:

   - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging
     processor:

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html

   - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics
     Applications":

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html

   - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC:

       https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X

  These are actual commercial products we now support with an in-kernel
  device tree source file:

   - Bosch Guardian is a product made by Bosch Power Tools GmbH, based
     on the Texas Instruments AM335x chip

   - Winterland IceBoard is a Texas Instruments AM3874 based machine
     used in telescopes at the south pole and elsewhere, see commit
     d0317731 for some pointers:

   - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500
     baseboard management controller. This is for running on the BMC.

   - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch
     used in airplanes.

   - Phicomm K3 is a WiFi router based on Broadcom bcm47094

   - Methode Electronics uDPU FTTdp distribution point unit

   - X96 Max, a generic TV box based on Amlogic G12a (S905X2)

   - NVIDIA Shield TV (Darcy) based on Tegra210

  And then there are several new SBC, evaluation, development or modular
  systems that we add:

   - Three new Rockchips rk3399 based boards:
       - FriendlyElec NanoPC-T4 and NanoPi M4
       - Radxa ROCK Pi 4

   - Five new i.MX6 family SoM modules and boards for industrial
     products:
       - Logic PD i.MX6QD SoM and evaluation baseboad
       - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
       - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module

   - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
     microcontroller

   - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system
     in 96boards form factor

   - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual
     platform for corresponding to the latest "fast model"

   - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit
     and 64-bit mode.

   - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards
     enterprise form factor

   - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108

  For already supported boards and SoCs, we often add support for new
  devices after merging the drivers. This time, the largest changes
  include updates for

   - STMicroelectronics stm32mp1, which was now formally launched last
     week

   - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip

   - Action Semi S700

   - TI AM654x, their recently merged 64-bit SoC from the OMAP family

   - Various Amlogic Meson SoCs

   - Mediatek MT2712

   - NVIDIA Tegra186 and Tegra210

   - The ancient NXP lpc32xx family

   - Samsung s5pv210, used in some older mobile phones

  Many other chips see smaller updates and bugfixes beyond that"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits)
  ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
  dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
  ARM: dts: am335x: switch to use phy-gmii-sel
  ARM: dts: am4372: switch to use phy-gmii-sel
  ARM: dts: dm814x: switch to use phy-gmii-sel
  ARM: dts: dra7: switch to use phy-gmii-sel
  arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU4
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU3
  ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
  ARM: dts: exynos: Add stdout path property to Arndale board
  ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
  ARM: dts: exynos: Enable ADC on Odroid HC1
  arm64: dts: sprd: Remove wildcard compatible string
  arm64: dts: sprd: Add SC27XX fuel gauge device
  arm64: dts: sprd: Add SC2731 charger device
  arm64: dts: sprd: Add ADC calibration support
  arm64: dts: sprd: Remove PMIC INTC irq trigger type
  arm64: dts: rockchip: Enable tsadc device on rock960
  ARM: dts: rockchip: add chosen node on veyron devices
  ...

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -109,6 +109,7 @@ Board compatible values (alphabetically, grouped by SoC):
   - "amlogic,s400" (Meson axg a113d)
 
   - "amlogic,u200" (Meson g12a s905d2)
+  - "amediatech,x96-max" (Meson g12a s905x2)
 
 Amlogic Meson Firmware registers Interface
 ------------------------------------------

Documentation/devicetree/bindings/arm/armadeus.txt

-Armadeus i.MX Platforms Device Tree Bindings
------------------------------------------------
-
-APF51: i.MX51 based module.
-Required root node properties:
-    - compatible = "armadeus,imx51-apf51", "fsl,imx51";

Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt

@@ -30,6 +30,10 @@ Raspberry Pi 2 Model B
 Required root node properties:
 compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
 
+Raspberry Pi 3 Model A+
+Required root node properties:
+compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
+
 Raspberry Pi 3 Model B
 Required root node properties:
 compatible = "raspberrypi,3-model-b", "brcm,bcm2837";

Documentation/devicetree/bindings/arm/bhf.txt

-Beckhoff Automation Platforms Device Tree Bindings
---------------------------------------------------
-
-CX9020 Embedded PC
-Required root node properties:
-    - compatible = "bhf,cx9020", "fsl,imx53";

Documentation/devicetree/bindings/arm/compulab-boards.txt

-CompuLab SB-SOM is a multi-module baseboard capable of carrying:
- - CM-T43
- - CM-T54
- - CM-QS600
- - CL-SOM-AM57x
- - CL-SOM-iMX7
-modules with minor modifications to the SB-SOM assembly.
-
-Required root node properties:
-    - compatible = should be "compulab,sb-som"
-
-Compulab CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on
-Freescale i.MX7 ARM Cortex-A7 System-on-Chip.
-
-Required root node properties:
-    - compatible = "compulab,cl-som-imx7", "fsl,imx7d";
-
-Compulab SBC-iMX7 is a single board computer based on the
-Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with
-the CL-SOM-iMX7 System-on-Module providing most of the functions,
-and SB-SOM-iMX7 carrier board providing additional peripheral
-functions and connectors.
-
-Required root node properties:
-    - compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";

Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt

+Freescale i.MX7ULP System Integration Module
+----------------------------------------------
+The system integration module (SIM) provides system control and chip configuration
+registers. In this module, chip revision information is located in JTAG ID register,
+and a set of registers have been made available in DGO domain for SW use, with the
+objective to maintain its value between system resets.
+
+Required properties:
+- compatible:	Should be "fsl,imx7ulp-sim".
+- reg:		Specifies base physical address and size of the register sets.
+
+Example:
+sim: sim@410a3000 {
+	compatible = "fsl,imx7ulp-sim", "syscon";
+	reg = <0x410a3000 0x1000>;
+};

Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt

@@ -70,7 +70,10 @@ Clock bindings based on SCU Message Protocol
 This binding uses the common clock binding[1].
 
 Required properties:
-- compatible:		Should be "fsl,imx8qxp-clock".
+- compatible:		Should be one of:
+			  "fsl,imx8qm-clock"
+			  "fsl,imx8qxp-clock"
+			followed by "fsl,scu-clk"
 - #clock-cells:		Should be 1. Contains the Clock ID value.
 - clocks:		List of clock specifiers, must contain an entry for
 			each required entry in clock-names
@@ -137,7 +140,7 @@ firmware {
 			  &lsio_mu1 1 3>;
 
 		clk: clk {
-			compatible = "fsl,imx8qxp-clk";
+			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
 			#clock-cells = <1>;
 		};
 

Documentation/devicetree/bindings/arm/fsl.txt

-Freescale i.MX Platforms Device Tree Bindings
------------------------------------------------
-
-i.MX23 Evaluation Kit
-Required root node properties:
-    - compatible = "fsl,imx23-evk", "fsl,imx23";
-
-i.MX25 Product Development Kit
-Required root node properties:
-    - compatible = "fsl,imx25-pdk", "fsl,imx25";
-
-i.MX27 Product Development Kit
-Required root node properties:
-    - compatible = "fsl,imx27-pdk", "fsl,imx27";
-
-i.MX28 Evaluation Kit
-Required root node properties:
-    - compatible = "fsl,imx28-evk", "fsl,imx28";
-
-i.MX51 Babbage Board
-Required root node properties:
-    - compatible = "fsl,imx51-babbage", "fsl,imx51";
-
-i.MX53 Automotive Reference Design Board
-Required root node properties:
-    - compatible = "fsl,imx53-ard", "fsl,imx53";
-
-i.MX53 Evaluation Kit
-Required root node properties:
-    - compatible = "fsl,imx53-evk", "fsl,imx53";
-
-i.MX53 Quick Start Board
-Required root node properties:
-    - compatible = "fsl,imx53-qsb", "fsl,imx53";
-
-i.MX53 Smart Mobile Reference Design Board
-Required root node properties:
-    - compatible = "fsl,imx53-smd", "fsl,imx53";
-
-i.MX6 Quad Armadillo2 Board
-Required root node properties:
-    - compatible = "fsl,imx6q-arm2", "fsl,imx6q";
-
-i.MX6 Quad SABRE Lite Board
-Required root node properties:
-    - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-
-i.MX6 Quad SABRE Smart Device Board
-Required root node properties:
-    - compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
-
-i.MX6 Quad SABRE Automotive Board
-Required root node properties:
-    - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
-
-i.MX6SLL EVK board
-Required root node properties:
-    - compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
-
-i.MX6 Quad Plus SABRE Smart Device Board
-Required root node properties:
-    - compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
-
-i.MX6 Quad Plus SABRE Automotive Board
-Required root node properties:
-    - compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
-
-i.MX6 DualLite SABRE Smart Device Board
-Required root node properties:
-    - compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
-
-i.MX6 DualLite/Solo SABRE Automotive Board
-Required root node properties:
-    - compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
-
-i.MX6 SoloLite EVK Board
-Required root node properties:
-    - compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
-
-i.MX6 UltraLite 14x14 EVK Board
-Required root node properties:
-    - compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
-
-i.MX6 UltraLiteLite 14x14 EVK Board
-Required root node properties:
-    - compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
-
-i.MX6 ULZ 14x14 EVK Board
-Required root node properties:
-    - compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
-
-i.MX6 SoloX SDB Board
-Required root node properties:
-    - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
-
-i.MX6 SoloX Sabre Auto Board
-Required root node properties:
-    - compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
-
-i.MX7 SabreSD Board
-Required root node properties:
-    - compatible = "fsl,imx7d-sdb", "fsl,imx7d";
-
-i.MX7ULP Evaluation Kit
-Required root node properties:
-    - compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp";
-
-Generic i.MX boards
--------------------
-
-No iomux setup is done for these boards, so this must have been configured
-by the bootloader for boards to work with the generic bindings.
-
-i.MX27 generic board
-Required root node properties:
-    - compatible = "fsl,imx27";
-
-i.MX51 generic board
-Required root node properties:
-    - compatible = "fsl,imx51";
-
-i.MX53 generic board
-Required root node properties:
-    - compatible = "fsl,imx53";
-
-i.MX6q generic board
-Required root node properties:
-    - compatible = "fsl,imx6q";
-
-i.MX7ULP generic board
-Required root node properties:
-    - compatible = "fsl,imx7ulp";
-
-Freescale Vybrid Platform Device Tree Bindings
-----------------------------------------------
-
-For the Vybrid SoC familiy all variants with DDR controller are supported,
-which is the VF5xx and VF6xx series. Out of historical reasons, in most
-places the kernel uses vf610 to refer to the whole familiy.
-The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4
-core support.
-
-Required root node compatible property (one of them):
-    - compatible = "fsl,vf500";
-    - compatible = "fsl,vf510";
-    - compatible = "fsl,vf600";
-    - compatible = "fsl,vf610";
-    - compatible = "fsl,vf610m4";
-
-Freescale LS1021A Platform Device Tree Bindings
-------------------------------------------------
-
-Required root node compatible properties:
-  - compatible = "fsl,ls1021a";
-
-Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
-----------------------------------------------------------------
-
-LS1012A SoC
-Required root node properties:
-    - compatible = "fsl,ls1012a";
-
-LS1012A ARMv8 based RDB Board
-Required root node properties:
-    - compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
-
-LS1012A ARMv8 based FRDM Board
-Required root node properties:
-    - compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
-
-LS1012A ARMv8 based QDS Board
-Required root node properties:
-    - compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
-
-LS1043A SoC
-Required root node properties:
-    - compatible = "fsl,ls1043a";
-
-LS1043A ARMv8 based RDB Board
-Required root node properties:
-    - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
-
-LS1043A ARMv8 based QDS Board
-Required root node properties:
-    - compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
-
-LS1046A SoC
-Required root node properties:
-    - compatible = "fsl,ls1046a";
-
-LS1046A ARMv8 based QDS Board
-Required root node properties:
-    - compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
-
-LS1046A ARMv8 based RDB Board
-Required root node properties:
-    - compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
-
-LS1088A SoC
-Required root node properties:
-    - compatible = "fsl,ls1088a";
-
-LS1088A ARMv8 based QDS Board
-Required root node properties:
-    - compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
-
-LS1088A ARMv8 based RDB Board
-Required root node properties:
-    - compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
-
-LS2080A SoC
-Required root node properties:
-    - compatible = "fsl,ls2080a";
-
-LS2080A ARMv8 based Simulator model
-Required root node properties:
-    - compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
-
-LS2080A ARMv8 based QDS Board
-Required root node properties:
-    - compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
-
-LS2080A ARMv8 based RDB Board
-Required root node properties:
-    - compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
-
-LS2088A SoC
-Required root node properties:
-    - compatible = "fsl,ls2088a";
-
-LS2088A ARMv8 based QDS Board
-Required root node properties:
-    - compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
-
-LS2088A ARMv8 based RDB Board
-Required root node properties:
-    - compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";

Documentation/devicetree/bindings/arm/fsl.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/arm/fsl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Platforms Device Tree Bindings
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Li Yang <leoyang.li@nxp.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: i.MX23 based Boards
+        items:
+          - enum:
+              - fsl,imx23-evk
+              - olimex,imx23-olinuxino
+          - const: fsl,imx23
+
+      - description: i.MX25 Product Development Kit
+        items:
+          - enum:
+              - fsl,imx25-pdk
+          - const: fsl,imx25
+
+      - description: i.MX27 Product Development Kit
+        items:
+          - enum:
+              - fsl,imx27-pdk
+          - const: fsl,imx27
+
+      - description: i.MX28 based Boards
+        items:
+          - enum:
+              - fsl,imx28-evk
+              - i2se,duckbill
+              - i2se,duckbill-2
+              - technologic,imx28-ts4600
+          - const: fsl,imx28
+      - description: i.MX28 Duckbill 2 based Boards
+        items:
+          - enum:
+              - i2se,duckbill-2-485
+              - i2se,duckbill-2-enocean
+              - i2se,duckbill-2-spi
+          - const: i2se,duckbill-2
+          - const: fsl,imx28
+
+      - description: i.MX51 Babbage Board
+        items:
+          - enum:
+              - armadeus,imx51-apf51
+              - fsl,imx51-babbage
+              - technologic,imx51-ts4800
+          - const: fsl,imx51
+
+      - description: i.MX53 based Boards
+        items:
+          - enum:
+              - bhf,cx9020
+              - fsl,imx53-ard
+              - fsl,imx53-evk
+              - fsl,imx53-qsb
+              - fsl,imx53-smd
+          - const: fsl,imx53
+
+      - description: i.MX6Q based Boards
+        items:
+          - enum:
+              - fsl,imx6q-arm2
+              - fsl,imx6q-sabreauto
+              - fsl,imx6q-sabrelite
+              - fsl,imx6q-sabresd
+              - technologic,imx6q-ts4900
+              - technologic,imx6q-ts7970
+          - const: fsl,imx6q
+
+      - description: i.MX6QP based Boards
+        items:
+          - enum:
+              - fsl,imx6qp-sabreauto      # i.MX6 Quad Plus SABRE Automotive Board
+              - fsl,imx6qp-sabresd        # i.MX6 Quad Plus SABRE Smart Device Board
+          - const: fsl,imx6qp
+
+      - description: i.MX6DL based Boards
+        items:
+          - enum:
+              - fsl,imx6dl-sabreauto      # i.MX6 DualLite/Solo SABRE Automotive Board
+              - fsl,imx6dl-sabresd        # i.MX6 DualLite SABRE Smart Device Board
+              - technologic,imx6dl-ts4900
+              - technologic,imx6dl-ts7970
+              - ysoft,imx6dl-yapp4-draco  # i.MX6 DualLite Y Soft IOTA Draco board
+              - ysoft,imx6dl-yapp4-hydra  # i.MX6 DualLite Y Soft IOTA Hydra board
+              - ysoft,imx6dl-yapp4-ursa   # i.MX6 Solo Y Soft IOTA Ursa board
+          - const: fsl,imx6dl
+
+      - description: i.MX6SL based Boards
+        items:
+          - enum:
+              - fsl,imx6sl-evk            # i.MX6 SoloLite EVK Board
+          - const: fsl,imx6sl
+
+      - description: i.MX6SLL based Boards
+        items:
+          - enum:
+              - fsl,imx6sll-evk
+          - const: fsl,imx6sll
+
+      - description: i.MX6SX based Boards
+        items:
+          - enum:
+              - fsl,imx6sx-sabreauto      # i.MX6 SoloX Sabre Auto Board
+              - fsl,imx6sx-sdb            # i.MX6 SoloX SDB Board
+          - const: fsl,imx6sx
+
+      - description: i.MX6UL based Boards
+        items:
+          - enum:
+              - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
+          - const: fsl,imx6ul
+
+      - description: i.MX6ULL based Boards
+        items:
+          - enum:
+              - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULZ based Boards
+        items:
+          - enum:
+              - fsl,imx6ulz-14x14-evk     # i.MX6 ULZ 14x14 EVK Board
+          - const: fsl,imx6ull # This seems odd. Should be last?
+          - const: fsl,imx6ulz
+
+      - description: i.MX7D based Boards
+        items:
+          - enum:
+              - fsl,imx7d-sdb             # i.MX7 SabreSD Board
+          - const: fsl,imx7d
+
+      - description:
+          Compulab SBC-iMX7 is a single board computer based on the
+          Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with
+          the CL-SOM-iMX7 System-on-Module providing most of the functions,
+          and SB-SOM-iMX7 carrier board providing additional peripheral
+          functions and connectors.
+        items:
+          - const: compulab,sbc-imx7
+          - const: compulab,cl-som-imx7
+          - const: fsl,imx7d
+
+      - description: i.MX8QXP based Boards
+        items:
+          - enum:
+              - fsl,imx8qxp-mek           # i.MX8QXP MEK Board
+          - const: fsl,imx8qxp
+
+      - description:
+          Freescale Vybrid Platform Device Tree Bindings
+
+          For the Vybrid SoC familiy all variants with DDR controller are supported,
+          which is the VF5xx and VF6xx series. Out of historical reasons, in most
+          places the kernel uses vf610 to refer to the whole familiy.
+          The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4
+          core support.
+        items:
+          - enum:
+              - fsl,vf500
+              - fsl,vf510
+              - fsl,vf600
+              - fsl,vf610
+              - fsl,vf610m4
+
+      - description: LS1012A based Boards
+        items:
+          - enum:
+              - ebs-systart,oxalis
+              - fsl,ls1012a-rdb
+              - fsl,ls1012a-frdm
+              - fsl,ls1012a-qds
+          - const: fsl,ls1012a
+
+      - description: LS1021A based Boards
+        items:
+          - enum:
+              - fsl,ls1021a-moxa-uc-8410a
+              - fsl,ls1021a-qds
+              - fsl,ls1021a-twr
+          - const: fsl,ls1021a
+
+      - description: LS1043A based Boards
+        items:
+          - enum:
+              - fsl,ls1043a-rdb
+              - fsl,ls1043a-qds
+          - const: fsl,ls1043a
+
+      - description: LS1046A based Boards
+        items:
+          - enum:
+              - fsl,ls1046a-qds
+              - fsl,ls1046a-rdb
+          - const: fsl,ls1046a
+
+      - description: LS1088A based Boards
+        items:
+          - enum:
+              - fsl,ls1088a-qds
+              - fsl,ls1088a-rdb
+          - const: fsl,ls1088a
+
+      - description: LS2080A based Boards
+        items:
+          - enum:
+              - fsl,ls2080a-simu
+              - fsl,ls2080a-qds
+              - fsl,ls2080a-rdb
+          - const: fsl,ls2080a
+
+      - description: LS2088A based Boards
+        items:
+          - enum:
+              - fsl,ls2088a-qds
+              - fsl,ls2088a-rdb
+          - const: fsl,ls2088a
+
+...

Documentation/devicetree/bindings/arm/i2se.txt

-I2SE Device Tree Bindings
--------------------------
-
-Duckbill Board
-Required root node properties:
-    - compatible = "i2se,duckbill", "fsl,imx28";
-
-Duckbill 2 Board
-Required root node properties:
-    - compatible = "i2se,duckbill-2", "fsl,imx28";
-
-Duckbill 2 485 Board
-Required root node properties:
-    - compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
-
-Duckbill 2 EnOcean Board
-Required root node properties:
-    - compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
-
-Duckbill 2 SPI Board
-Required root node properties:
-    - compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";

Documentation/devicetree/bindings/arm/mediatek.txt

@@ -15,11 +15,12 @@ compatible: Must contain one of
    "mediatek,mt6795"
    "mediatek,mt6797"
    "mediatek,mt7622"
-   "mediatek,mt7623" which is referred to MT7623N SoC
-   "mediatek,mt7623a"
+   "mediatek,mt7623"
+   "mediatek,mt7629"
    "mediatek,mt8127"
    "mediatek,mt8135"
    "mediatek,mt8173"
+   "mediatek,mt8183"
 
 
 Supported boards:
@@ -57,6 +58,9 @@ Supported boards:
 - Reference board variant 1 for MT7622:
     Required root node properties:
       - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
+- Bananapi BPI-R64 for MT7622:
+    Required root node properties:
+      - compatible = "bananapi,bpi-r64", "mediatek,mt7622";
 - Reference board for MT7623a with eMMC:
     Required root node properties:
       - compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623";
@@ -68,6 +72,9 @@ Supported boards:
       - compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
 - Bananapi BPI-R2 board:
       - compatible = "bananapi,bpi-r2", "mediatek,mt7623";
+- Reference board for MT7629:
+    Required root node properties:
+      - compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
 - MTK mt8127 tablet moose EVB:
     Required root node properties:
       - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
@@ -77,3 +84,6 @@ Supported boards:
 - MTK mt8173 tablet EVB:
     Required root node properties:
       - compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
+- Evaluation board for MT8183:
+    Required root node properties:
+      - compatible = "mediatek,mt8183-evb", "mediatek,mt8183";

Documentation/devicetree/bindings/arm/olimex.txt

-Olimex Device Tree Bindings
----------------------------
-
-SAM9-L9260 Board
-Required root node properties:
-    - compatible = "olimex,sam9-l9260", "atmel,at91sam9260";
-
-i.MX23 Olinuxino Low Cost Board
-Required root node properties:
-    - compatible = "olimex,imx23-olinuxino", "fsl,imx23";

Documentation/devicetree/bindings/arm/renesas.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/shmobile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Emma Mobile EV2
+        items:
+          - enum:
+              - renesas,kzm9d # Kyoto Microcomputer Co. KZM-A9-Dual
+          - const: renesas,emev2
+
+      - description: RZ/A1H (R7S72100)
+        items:
+          - enum:
+              - renesas,genmai # Genmai (RTK772100BC00000BR)
+              - renesas,gr-peach # GR-Peach (X28A-M01-E/F)
+              - renesas,rskrza1 # RSKRZA1 (YR0K77210C000BE)
+          - const: renesas,r7s72100
+
+      - description: RZ/A2 (R7S9210)
+        items:
+          - enum:
+              - renesas,rza2mevb # RZ/A2M Eval Board (RTK7921053S00000BE)
+          - const: renesas,r7s9210
+
+      - description: SH-Mobile AG5 (R8A73A00/SH73A0)
+        items:
+          - enum:
+              - renesas,kzm9g # Kyoto Microcomputer Co. KZM-A9-GT
+          - const: renesas,sh73a0
+
+      - description: R-Mobile APE6 (R8A73A40)
+        items:
+          - enum:
+              - renesas,ape6evm
+          - const: renesas,r8a73a4
+
+      - description: R-Mobile A1 (R8A77400)
+        items:
+          - enum:
+              - renesas,armadillo800eva # Atmark Techno Armadillo-800 EVA
+          - const: renesas,r8a7740
+
+      - description: RZ/G1H (R8A77420)
+        items:
+          - const: renesas,r8a7742
+
+      - description: RZ/G1M (R8A77430)
+        items:
+          - enum:
+              # iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven)
+              - iwave,g20d
+          - const: iwave,g20m
+          - const: renesas,r8a7743
+
+      - items:
+          - enum:
+              # iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
+              - iwave,g20m
+              - renesas,sk-rzg1m # SK-RZG1M (YR8A77430S000BE)
+          - const: renesas,r8a7743
+
+      - description: RZ/G1N (R8A77440)
+        items:
+          - enum:
+              # iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven)
+              - iwave,g20d
+          - const: iwave,g20m
+          - const: renesas,r8a7744
+
+      - items:
+          - enum:
+              # iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven)
+              - iwave,g20m
+          - const: renesas,r8a7744
+
+      - description: RZ/G1E (R8A77450)
+        items:
+          - enum:
+              - iwave,g22m # iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM)
+              - renesas,sk-rzg1e # SK-RZG1E (YR8A77450S000BE)
+          - const: renesas,r8a7745
+
+      - description: iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D)
+        items:
+          - const: iwave,g22d
+          - const: iwave,g22m
+          - const: renesas,r8a7745
+
+      - description: RZ/G1C (R8A77470)
+        items:
+          - enum:
+              - iwave,g23s #iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
+          - const: renesas,r8a77470
+
+      - description: RZ/G2M (R8A774A1)
+        items:
+          - const: renesas,r8a774a1
+
+      - description: RZ/G2E (R8A774C0)
+        items:
+          - enum:
+              - si-linux,cat874 # Silicon Linux RZ/G2E 96board platform (CAT874)
+          - const: renesas,r8a774c0
+
+      - items:
+          - enum:
+              - si-linux,cat875 # Silicon Linux sub board for CAT874 (CAT875)
+          - const: si-linux,cat874
+          - const: renesas,r8a774c0
+
+      - description: R-Car M1A (R8A77781)
+        items:
+          - enum:
+              - renesas,bockw
+          - const: renesas,r8a7778
+
+      - description: R-Car H1 (R8A77790)
+        items:
+          - enum:
+              - renesas,marzen # Marzen (R0P7779A00010S)
+          - const: renesas,r8a7779
+
+      - description: R-Car H2 (R8A77900)
+        items:
+          - enum:
+              - renesas,lager # Lager (RTP0RC7790SEB00010S)
+              - renesas,stout # Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
+          - const: renesas,r8a7790
+
+      - description: R-Car M2-W (R8A77910)
+        items:
+          - enum:
+              - renesas,henninger
+              - renesas,koelsch # Koelsch (RTP0RC7791SEB00010S)
+              - renesas,porter # Porter (M2-LCDP)
+          - const: renesas,r8a7791
+
+      - description: R-Car V2H (R8A77920)
+        items:
+          - enum:
+              - renesas,blanche # Blanche (RTP0RC7792SEB00010S)
+              - renesas,wheat # Wheat (RTP0RC7792ASKB0000JE)
+          - const: renesas,r8a7792
+
+      - description: R-Car M2-N (R8A77930)
+        items:
+          - enum:
+              - renesas,gose # Gose (RTP0RC7793SEB00010S)
+          - const: renesas,r8a7793
+
+      - description: R-Car E2 (R8A77940)
+        items:
+          - enum:
+              - renesas,alt # Alt (RTP0RC7794SEB00010S)
+              - renesas,silk # SILK (RTP0RC7794LCB00011S)
+          - const: renesas,r8a7794
+
+      - description: R-Car H3 (R8A77950)
+        items:
+          - enum:
+                # H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1))
+                # H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0))
+              - renesas,h3ulcb
+              - renesas,salvator-x # Salvator-X (RTP0RC7795SIPB0010S)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
+          - const: renesas,r8a7795
+
+      - description: R-Car M3-W (R8A77960)
+        items:
+          - enum:
+              - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
+              - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S)
+          - const: renesas,r8a7796
+
+      - description: Kingfisher (SBEV-RCAR-KF-M03)
+        items:
+          - const: shimafuji,kingfisher
+          - enum:
+              - renesas,h3ulcb
+              - renesas,m3ulcb
+          - enum:
+              - renesas,r8a7795
+              - renesas,r8a7796
+
+      - description: R-Car M3-N (R8A77965)
+        items:
+          - enum:
+              - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
+              - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S (M3-N))
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S)
+          - const: renesas,r8a77965
+
+      - description: R-Car V3M (R8A77970)
+        items:
+          - enum:
+              - renesas,eagle # Eagle (RTP0RC77970SEB0010S)
+              - renesas,v3msk # V3MSK (Y-ASK-RCAR-V3M-WS10)
+          - const: renesas,r8a77970
+
+      - description: R-Car V3H (R8A77980)
+        items:
+          - enum:
+              - renesas,condor # Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01)
+              - renesas,v3hsk # V3HSK (Y-ASK-RCAR-V3H-WS10)
+          - const: renesas,r8a77980
+
+      - description: R-Car E3 (R8A77990)
+        items:
+          - enum:
+              - renesas,ebisu # Ebisu (RTP0RC77990SEB0010S)
+          - const: renesas,r8a77990
+
+      - description: R-Car D3 (R8A77995)
+        items:
+          - enum:
+              - renesas,draak # Draak (RTP0RC77995SEB0010S)
+          - const: renesas,r8a77995
+
+      - description: RZ/N1D (R9A06G032)
+        items:
+          - enum:
+              - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
+          - const: renesas,r9a06g032
+
+...

Documentation/devicetree/bindings/arm/rockchip.yaml

@@ -60,6 +60,11 @@ properties:
           - const: chipspark,rayeager-px2
           - const: rockchip,rk3066a
 
+      - description: Elgin RV1108 R1
+        items:
+          - const: elgin,rv1108-r1
+          - const: rockchip,rv1108
+
       - description: Firefly Firefly-RK3288
         items:
           - enum:
@@ -87,6 +92,13 @@ properties:
           - const: firefly,roc-rk3399-pc
           - const: rockchip,rk3399
 
+      - description: FriendlyElec NanoPi4 series boards
+        items:
+          - enum:
+              - friendlyarm,nanopc-t4
+              - friendlyarm,nanopi-m4
+          - const: rockchip,rk3399
+
       - description: GeekBuying GeekBox
         items:
           - const: geekbuying,geekbox
@@ -317,6 +329,11 @@ properties:
           - const: radxa,rock
           - const: rockchip,rk3188
 
+      - description: Radxa ROCK Pi 4
+        items:
+          - const: radxa,rockpi4
+          - const: rockchip,rk3399
+
       - description: Radxa Rock2 Square
         items:
           - const: radxa,rock2-square

Documentation/devicetree/bindings/arm/shmobile.txt

-Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
---------------------------------------------------------------------
-
-SoCs:
-
-  - Emma Mobile EV2
-    compatible = "renesas,emev2"
-  - RZ/A1H (R7S72100)
-    compatible = "renesas,r7s72100"
-  - RZ/A2 (R7S9210)
-    compatible = "renesas,r7s9210"
-  - SH-Mobile AG5 (R8A73A00/SH73A0)
-    compatible = "renesas,sh73a0"
-  - R-Mobile APE6 (R8A73A40)
-    compatible = "renesas,r8a73a4"
-  - R-Mobile A1 (R8A77400)
-    compatible = "renesas,r8a7740"
-  - RZ/G1H (R8A77420)
-    compatible = "renesas,r8a7742"
-  - RZ/G1M (R8A77430)
-    compatible = "renesas,r8a7743"
-  - RZ/G1N (R8A77440)
-    compatible = "renesas,r8a7744"
-  - RZ/G1E (R8A77450)
-    compatible = "renesas,r8a7745"
-  - RZ/G1C (R8A77470)
-    compatible = "renesas,r8a77470"
-  - RZ/G2M (R8A774A1)
-    compatible = "renesas,r8a774a1"
-  - RZ/G2E (R8A774C0)
-    compatible = "renesas,r8a774c0"
-  - R-Car M1A (R8A77781)
-    compatible = "renesas,r8a7778"
-  - R-Car H1 (R8A77790)
-    compatible = "renesas,r8a7779"
-  - R-Car H2 (R8A77900)
-    compatible = "renesas,r8a7790"
-  - R-Car M2-W (R8A77910)
-    compatible = "renesas,r8a7791"
-  - R-Car V2H (R8A77920)
-    compatible = "renesas,r8a7792"
-  - R-Car M2-N (R8A77930)
-    compatible = "renesas,r8a7793"
-  - R-Car E2 (R8A77940)
-    compatible = "renesas,r8a7794"
-  - R-Car H3 (R8A77950)
-    compatible = "renesas,r8a7795"
-  - R-Car M3-W (R8A77960)
-    compatible = "renesas,r8a7796"
-  - R-Car M3-N (R8A77965)
-    compatible = "renesas,r8a77965"
-  - R-Car V3M (R8A77970)
-    compatible = "renesas,r8a77970"
-  - R-Car V3H (R8A77980)
-    compatible = "renesas,r8a77980"
-  - R-Car E3 (R8A77990)
-    compatible = "renesas,r8a77990"
-  - R-Car D3 (R8A77995)
-    compatible = "renesas,r8a77995"
-  - RZ/N1D (R9A06G032)
-    compatible = "renesas,r9a06g032"
-
-Boards:
-
-  - Alt (RTP0RC7794SEB00010S)
-    compatible = "renesas,alt", "renesas,r8a7794"
-  - APE6-EVM
-    compatible = "renesas,ape6evm", "renesas,r8a73a4"
-  - Atmark Techno Armadillo-800 EVA
-    compatible = "renesas,armadillo800eva", "renesas,r8a7740"
-  - Blanche (RTP0RC7792SEB00010S)
-    compatible = "renesas,blanche", "renesas,r8a7792"
-  - BOCK-W
-    compatible = "renesas,bockw", "renesas,r8a7778"
-  - Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01)
-    compatible = "renesas,condor", "renesas,r8a77980"
-  - Draak (RTP0RC77995SEB0010S)
-    compatible = "renesas,draak", "renesas,r8a77995"
-  - Eagle (RTP0RC77970SEB0010S)
-    compatible = "renesas,eagle", "renesas,r8a77970"
-  - Ebisu (RTP0RC77990SEB0010S)
-    compatible = "renesas,ebisu", "renesas,r8a77990"
-  - Genmai (RTK772100BC00000BR)
-    compatible = "renesas,genmai", "renesas,r7s72100"
-  - GR-Peach (X28A-M01-E/F)
-    compatible = "renesas,gr-peach", "renesas,r7s72100"
-  - Gose (RTP0RC7793SEB00010S)
-    compatible = "renesas,gose", "renesas,r8a7793"
-  - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1))
-    H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0))
-    compatible = "renesas,h3ulcb", "renesas,r8a7795"
-  - Henninger
-    compatible = "renesas,henninger", "renesas,r8a7791"
-  - iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
-    compatible = "iwave,g23s", "renesas,r8a77470"
-  - iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D)
-    compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"
-  - iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM)
-    compatible = "iwave,g22m", "renesas,r8a7745"
-  - iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven)
-    compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"
-  - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
-    compatible = "iwave,g20m", "renesas,r8a7743"
-  - iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven)
-    compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744"
-  - iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven)
-    compatible = "iwave,g20m", "renesas,r8a7744"
-  - Kingfisher (SBEV-RCAR-KF-M03)
-    compatible = "shimafuji,kingfisher"
-  - Koelsch (RTP0RC7791SEB00010S)
-    compatible = "renesas,koelsch", "renesas,r8a7791"
-  - Kyoto Microcomputer Co. KZM-A9-Dual
-    compatible = "renesas,kzm9d", "renesas,emev2"
-  - Kyoto Microcomputer Co. KZM-A9-GT
-    compatible = "renesas,kzm9g", "renesas,sh73a0"
-  - Lager (RTP0RC7790SEB00010S)
-    compatible = "renesas,lager", "renesas,r8a7790"
-  - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
-    compatible = "renesas,m3ulcb", "renesas,r8a7796"
-  - M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
-    compatible = "renesas,m3nulcb", "renesas,r8a77965"
-  - Marzen (R0P7779A00010S)
-    compatible = "renesas,marzen", "renesas,r8a7779"
-  - Porter (M2-LCDP)
-    compatible = "renesas,porter", "renesas,r8a7791"
-  - RSKRZA1 (YR0K77210C000BE)
-    compatible = "renesas,rskrza1", "renesas,r7s72100"
-  - RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
-    compatible = "renesas,rzn1d400-db", "renesas,r9a06g032"
-  - Salvator-X (RTP0RC7795SIPB0010S)
-    compatible = "renesas,salvator-x", "renesas,r8a7795"
-  - Salvator-X (RTP0RC7796SIPB0011S)
-    compatible = "renesas,salvator-x", "renesas,r8a7796"
-  - Salvator-X (RTP0RC7796SIPB0011S (M3-N))
-    compatible = "renesas,salvator-x", "renesas,r8a77965"
-  - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
-    compatible = "renesas,salvator-xs", "renesas,r8a7795"
-  - Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S)
-    compatible = "renesas,salvator-xs", "renesas,r8a7796"
-  - Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S)
-    compatible = "renesas,salvator-xs", "renesas,r8a77965"
-  - SILK (RTP0RC7794LCB00011S)
-    compatible = "renesas,silk", "renesas,r8a7794"
-  - SK-RZG1E (YR8A77450S000BE)
-    compatible = "renesas,sk-rzg1e", "renesas,r8a7745"
-  - SK-RZG1M (YR8A77430S000BE)
-    compatible = "renesas,sk-rzg1m", "renesas,r8a7743"
-  - Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
-    compatible = "renesas,stout", "renesas,r8a7790"
-  - V3HSK (Y-ASK-RCAR-V3H-WS10)
-    compatible = "renesas,v3hsk", "renesas,r8a77980"
-  - V3MSK (Y-ASK-RCAR-V3M-WS10)
-    compatible = "renesas,v3msk", "renesas,r8a77970"
-  - Wheat (RTP0RC7792ASKB0000JE)
-    compatible = "renesas,wheat", "renesas,r8a7792"

Documentation/devicetree/bindings/arm/technologic.txt

-Technologic Systems Platforms Device Tree Bindings
---------------------------------------------------
-
-TS-4600 is a System-on-Module based on the Freescale i.MX28 System-on-Chip.
-It can be mounted on a carrier board providing additional peripheral connectors.
-Required root node properties:
-	- compatible = "technologic,imx28-ts4600", "fsl,imx28"
-
-TS-4800 board
-Required root node properties:
-	- compatible = "technologic,imx51-ts4800", "fsl,imx51";
-
-TS-4900 is a System-on-Module based on the Freescale i.MX6 System-on-Chip.
-It can be mounted on a carrier board providing additional peripheral connectors.
-Required root node properties:
-	- compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl"
-	- compatible = "technologic,imx6q-ts4900", "fsl,imx6q"
-
-TS-7970 is a System-on-Module based on the Freescale i.MX6 System-on-Chip.
-It can be mounted on a carrier board providing additional peripheral connectors.
-Required root node properties:
-	- compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl"
-	- compatible = "technologic,imx6q-ts7970", "fsl,imx6q"

Documentation/devicetree/bindings/arm/tegra.yaml

@@ -87,9 +87,11 @@ properties:
           - const: nvidia,tegra124
       - items:
           - enum:
+              - nvidia,darcy
               - nvidia,p2371-0000
               - nvidia,p2371-2180
               - nvidia,p2571
+              - nvidia,p2894-0050-a08
           - const: nvidia,tegra210
       - items:
           - enum:

Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt

@@ -8,10 +8,11 @@ the fast CPU cluster. It consists of a free-running voltage controlled
 oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop
 control module that will automatically adjust the VDD_CPU voltage by
 communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
-Currently only the I2C mode is supported by these bindings.
 
 Required properties:
-- compatible : should be "nvidia,tegra124-dfll"
+- compatible : should be one of:
+  - "nvidia,tegra124-dfll": for Tegra124
+  - "nvidia,tegra210-dfll": for Tegra210
 - reg : Defines the following set of registers, in the order listed:
         - registers for the DFLL control logic.
         - registers for the I2C output logic.
@@ -45,10 +46,31 @@ Required properties for the control loop parameters:
 Optional properties for the control loop parameters:
 - nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM.
 
+Optional properties for mode selection:
+- nvidia,pwm-to-pmic: Use PWM to control regulator rather then I2C.
+
 Required properties for I2C mode:
 - nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode.
 
-Example:
+Required properties for PWM mode:
+- nvidia,pwm-period-nanoseconds: period of PWM square wave in nanoseconds.
+- nvidia,pwm-tristate-microvolts: Regulator voltage in micro volts when PWM
+  control is disabled and the PWM output is tristated. Note that this voltage is
+  configured in hardware, typically via a resistor divider.
+- nvidia,pwm-min-microvolts: Regulator voltage in micro volts when PWM control
+  is enabled and PWM output is low. Hence, this is the minimum output voltage
+  that the regulator supports when PWM control is enabled.
+- nvidia,pwm-voltage-step-microvolts: Voltage increase in micro volts
+  corresponding to a 1/33th increase in duty cycle. Eg the voltage for 2/33th
+  duty cycle would be: nvidia,pwm-min-microvolts +
+  nvidia,pwm-voltage-step-microvolts * 2.
+- pinctrl-0: I/O pad configuration when PWM control is enabled.
+- pinctrl-1: I/O pad configuration when PWM control is disabled.
+- pinctrl-names: must include the following entries:
+  - dvfs_pwm_enable: I/O pad configuration when PWM control is enabled.
+  - dvfs_pwm_disable: I/O pad configuration when PWM control is disabled.
+
+Example for I2C:
 
 clock@70110000 {
         compatible = "nvidia,tegra124-dfll";
@@ -76,3 +98,58 @@ clock@70110000 {
 
         nvidia,i2c-fs-rate = <400000>;
 };
+
+Example for PWM:
+
+clock@70110000 {
+	compatible = "nvidia,tegra124-dfll";
+	reg = <0 0x70110000 0 0x100>, /* DFLL control */
+	      <0 0x70110000 0 0x100>, /* I2C output control */
+	      <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+	      <0 0x70110200 0 0x100>; /* Look-up table RAM */
+	interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>,
+	         <&tegra_car TEGRA210_CLK_DFLL_REF>,
+		 <&tegra_car TEGRA124_CLK_I2C5>;;
+	clock-names = "soc", "ref", "i2c";
+	resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+	reset-names = "dvco";
+	#clock-cells = <0>;
+	clock-output-names = "dfllCPU_out";
+
+	nvidia,sample-rate = <25000>;
+	nvidia,droop-ctrl = <0x00000f00>;
+	nvidia,force-mode = <1>;
+	nvidia,cf = <6>;
+	nvidia,ci = <0>;
+	nvidia,cg = <2>;
+
+	nvidia,pwm-min-microvolts = <708000>; /* 708mV */
+	nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
+	nvidia,pwm-to-pmic;
+	nvidia,pwm-tristate-microvolts = <1000000>;
+	nvidia,pwm-voltage-step-microvolts = <19200>; /* 19.2mV */
+
+	pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
+	pinctrl-0 = <&dvfs_pwm_active_state>;
+	pinctrl-1 = <&dvfs_pwm_inactive_state>;
+};
+
+/* pinmux nodes added for completeness. Binding doc can be found in:
+ * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
+ */
+
+pinmux: pinmux@700008d4 {
+	dvfs_pwm_active_state: dvfs_pwm_active {
+		dvfs_pwm_pbb1 {
+			nvidia,pins = "dvfs_pwm_pbb1";
+			nvidia,tristate = <TEGRA_PIN_DISABLE>;
+		};
+	};
+	dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+		dvfs_pwm_pbb1 {
+			nvidia,pins = "dvfs_pwm_pbb1";
+			nvidia,tristate = <TEGRA_PIN_ENABLE>;
+		};
+	};
+};

Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt

@@ -9,11 +9,9 @@ Required properties:
   See ../clocks/clock-bindings.txt for details.
 - clock-names: Must include the following entries:
   - cpu_g: Clock mux for the fast CPU cluster.
-  - cpu_lp: Clock mux for the low-power CPU cluster.
   - pll_x: Fast PLL clocksource.
   - pll_p: Auxiliary PLL used during fast PLL rate changes.
   - dfll: Fast DFLL clocksource that also automatically scales CPU voltage.
-- vdd-cpu-supply: Regulator for CPU voltage
 
 Optional properties:
 - clock-latency: Specify the possible maximum transition latency for clock,
@@ -31,13 +29,11 @@ cpus {
 		reg = <0>;
 
 		clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
-			 <&tegra_car TEGRA124_CLK_CCLK_LP>,
 			 <&tegra_car TEGRA124_CLK_PLL_X>,
 			 <&tegra_car TEGRA124_CLK_PLL_P>,
 			 <&dfll>;
-		clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+		clock-names = "cpu_g", "pll_x", "pll_p", "dfll";
 		clock-latency = <300000>;
-		vdd-cpu-supply: <&vdd_cpu>;
 	};
 
 	<...>

Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt

+Meson specific Simple Framebuffer bindings
+
+This binding documents meson specific extensions to the simple-framebuffer
+bindings. The meson simplefb u-boot code relies on the devicetree containing
+pre-populated simplefb nodes.
+
+These extensions are intended so that u-boot can select the right node based
+on which pipeline is being used. As such they are solely intended for
+firmware / bootloader use, and the OS should ignore them.
+
+Required properties:
+- compatible: "amlogic,simple-framebuffer", "simple-framebuffer"
+- amlogic,pipeline, one of:
+  "vpu-cvbs"
+  "vpu-hdmi"
+
+Example:
+
+chosen {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	simplefb_hdmi: framebuffer-hdmi {
+		compatible = "amlogic,simple-framebuffer",
+			     "simple-framebuffer";
+		amlogic,pipeline = "vpu-hdmi";
+		clocks = <&clkc CLKID_HDMI_PCLK>,
+			 <&clkc CLKID_CLK81>,
+			 <&clkc CLKID_GCLK_VENCI_INT0>;
+		power-domains = <&pwrc_vpu>;
+	};
+};