diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt
index e926aea1147d49a06aadb5bc39cd4802afba7053..68301b77e854c86abc7d8e63cf67bcedb8b4b174 100644
--- a/Documentation/devicetree/bindings/arm/arch_timer.txt
+++ b/Documentation/devicetree/bindings/arm/arch_timer.txt
@@ -108,6 +108,5 @@ Example:
frame-number = <1>
interrupts = <0 15 0x8>;
reg = <0xf0003000 0x1000>;
- status = "disabled";
};
};
diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
index 171d02cadea478f50d5e95f52b489b8b11d77dc0..29cdbae6c5ac7f76fd5c7981714f113692766cd7 100644
--- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
@@ -183,7 +183,6 @@ cpm_syscon0: system-controller@440000 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cpm_pinctrl 0 0 32>;
- status = "disabled";
};
};
diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt
index a668f0e7d0018b76841127db20845a7fd45affd6..02e690a675db738dc98555112d4faad578254100 100644
--- a/Documentation/devicetree/bindings/ata/apm-xgene.txt
+++ b/Documentation/devicetree/bindings/ata/apm-xgene.txt
@@ -57,7 +57,6 @@ Example:
<0x0 0x1f227000 0x0 0x1000>;
interrupts = <0x0 0x87 0x4>;
dma-coherent;
- status = "ok";
clocks = <&sataclk 0>;
phys = <&phy2 0>;
phy-names = "sata-phy";
@@ -72,7 +71,6 @@ Example:
<0x0 0x1f237000 0x0 0x1000>;
interrupts = <0x0 0x88 0x4>;
dma-coherent;
- status = "ok";
clocks = <&sataclk 0>;
phys = <&phy3 0>;
phy-names = "sata-phy";
diff --git a/Documentation/devicetree/bindings/ata/imx-pata.txt b/Documentation/devicetree/bindings/ata/imx-pata.txt
index e38d73414b0d266474d9e40f4b795c089821e8da..f1172f00188aeba2ae7638a4acc4955c064e5624 100644
--- a/Documentation/devicetree/bindings/ata/imx-pata.txt
+++ b/Documentation/devicetree/bindings/ata/imx-pata.txt
@@ -13,5 +13,4 @@ Example:
reg = <0x83fe0000 0x4000>;
interrupts = <70>;
clocks = <&clks 161>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
index fa6cde41b4603537aa77eb5d650558f755b96d2a..f2ab7fd013bd514e1a4a6ef6a4094deaf65a2184 100644
--- a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
+++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
@@ -227,7 +227,6 @@ See the example below, where a more complete device tree is shown:
};
devbus-bootcs {
- status = "okay";
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;
/* NOR */
@@ -240,7 +239,6 @@ See the example below, where a more complete device tree is shown:
pcie-controller {
compatible = "marvell,armada-xp-pcie";
- status = "okay";
device_type = "pci";
#address-cells = <3>;
@@ -258,7 +256,6 @@ See the example below, where a more complete device tree is shown:
pcie@1,0 {
/* Port 0, Lane 0 */
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
index 83b0e54f727c36b468107d28c83870603f5acabb..3e21eb82281161977f9d8172e5e20f749891febe 100644
--- a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
+++ b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
@@ -84,7 +84,6 @@ gmi@70090000 {
reset-names = "gmi";
ranges = <4 0 0xd0000000 0xfffffff>;
- status = "okay";
bus@4,0 {
compatible = "simple-bus";
@@ -121,7 +120,6 @@ gmi@70090000 {
reset-names = "gmi";
ranges = <4 0 0xd0000000 0xfffffff>;
- status = "okay";
can@4,0 {
reg = <4 0 0x100>;
diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
index 7ff13be1750ba542e5c79a355178f617523adadb..3108d03802ee9c2d7e16de057f3ccfb9e999c455 100644
--- a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
+++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
@@ -33,7 +33,6 @@ Example:
#size-cells = <1>;
ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
- status = "disabled";
child1 {
...
diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
index dee3f5d9df2665f55ac2b3a84ee948eba4257320..e3b13ea7d2ae38ea658adc551ea65377a36c7f97 100644
--- a/Documentation/devicetree/bindings/chosen.txt
+++ b/Documentation/devicetree/bindings/chosen.txt
@@ -5,9 +5,31 @@ The chosen node does not represent a real device, but serves as a place
for passing data between firmware and the operating system, like boot
arguments. Data in the chosen node does not represent the hardware.
+The following properties are recognized:
-stdout-path property
---------------------
+
+kaslr-seed
+-----------
+
+This property is used when booting with CONFIG_RANDOMIZE_BASE as the
+entropy used to randomize the kernel image base address location. Since
+it is used directly, this value is intended only for KASLR, and should
+not be used for other purposes (as it may leak information about KASLR
+offsets). It is parsed as a u64 value, e.g.
+
+/ {
+ chosen {
+ kaslr-seed = <0xfeedbeef 0xc0def00d>;
+ };
+};
+
+Note that if this property is set from UEFI (or a bootloader in EFI
+mode) when EFI_RNG_PROTOCOL is supported, it will be overwritten by
+the Linux EFI stub (which will populate the property itself, using
+EFI_RNG_PROTOCOL).
+
+stdout-path
+-----------
Device trees may specify the device to be used for boot console output
with a stdout-path property under /chosen, as described in the Devicetree
diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt
index 62e67e883e76ca7ce995b1ff92c8b4133422af5c..b3205b21c9d03647a21715fd0c5574e4a49695c6 100644
--- a/Documentation/devicetree/bindings/clock/alphascale,acc.txt
+++ b/Documentation/devicetree/bindings/clock/alphascale,acc.txt
@@ -102,7 +102,6 @@ uart4: serial@80010000 {
reg = <0x80010000 0x4000>;
clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
interrupts = <19>;
- status = "disabled";
};
Clock consumer with only one, _AHB_ sink.
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
index a55d31b48d6efb88e3de71d74410def2c3aa5d3c..faa6d8ac583412557118a53c3bebb22ea0ab159a 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -41,5 +41,4 @@ Example: UART controller node that consumes the clock and reset generated
interrupts = <0 90 1>;
clocks = <&clkc_AO CLKID_AO_UART1>;
resets = <&clkc_AO RESET_AO_UART1>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index a09d627b5508a2f8c9905dc9c02c09387acfe9e6..9240407691860d90d36e0991d0672affdb9d4077 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -33,5 +33,4 @@ Example: UART controller node that consumes the clock generated by the clock
reg = <0xc81004c0 0x14>;
interrupts = <0 90 1>;
clocks = <&clkc CLKID_CLK81>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
index 606da38c095951f3559fb89ab763f0b6d748ccad..207682647d33a41fd6bbee805dfebe2e8b04ef83 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
@@ -39,5 +39,4 @@ Example: UART controller node that consumes the clock generated by the clock
reg = <0xc81004c0 0x14>;
interrupts = <0 90 1>;
clocks = <&clkc CLKID_CLK81>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
index 5286e260fcae5ea4a81f888964e273fdbec13958..8e5a7d868557bcfa9165b91a36f319823163eec4 100644
--- a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
@@ -46,7 +46,6 @@ Device tree example:
uart@3e002000 {
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
- status = "disabled";
reg = <0x3e002000 0x1000>;
clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index 1dc80f8811fe8ba03b13c1180301a255983d33ad..fe885abc9cb44874b2e7b7d42d6118a7a0828533 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -465,5 +465,4 @@ Example 3: UART controller node that consumes the clock generated by the clock
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
pinctrl-0 = <&uart0_bus>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/hi3660-clock.txt b/Documentation/devicetree/bindings/clock/hi3660-clock.txt
index cc9b86c357581bb16f908a2207d81dec597d713c..0035a7ecaf207e43a7f6bdfd1cf27ad7754f42da 100644
--- a/Documentation/devicetree/bindings/clock/hi3660-clock.txt
+++ b/Documentation/devicetree/bindings/clock/hi3660-clock.txt
@@ -38,5 +38,4 @@ Examples:
clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
<&crg_ctrl HI3660_PCLK>;
clock-names = "uartclk", "apb_pclk";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
index 7894a64887cb16e56be8aaedca7cc2c9cb14436d..4733e58e491ba7e82cac0c5c41ba448b6fdb37d1 100644
--- a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
+++ b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
@@ -27,5 +27,4 @@ Examples:
interrupts = <0 49 4>;
clocks = <&clock HIX5HD2_FIXED_83M>;
clock-names = "apb_pclk";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt
index c3b0db437c48da2bfa29431f3f45eae8c70597c1..806f63d628bdf8182fe6b974450804a31acd79e7 100644
--- a/Documentation/devicetree/bindings/clock/imx21-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.txt
@@ -24,5 +24,4 @@ Examples:
clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
<&clks IMX21_CLK_PER1>;
clock-names = "ipg", "per";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt
index 5083c0b834b25094fe7d5159cc51238cc37ef921..8385348d3bd99f16db9bb3c13887edf8f83546a9 100644
--- a/Documentation/devicetree/bindings/clock/imx23-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt
@@ -67,5 +67,4 @@ auart0: serial@8006c000 {
reg = <0x8006c000 0x2000>;
interrupts = <24 25 23>;
clocks = <&clks 32>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt
index ba6b312ff8a58145a834cf424caad44d26efef4d..f8135ea9ca4e2a371e95d12e5dcebccd40b3989a 100644
--- a/Documentation/devicetree/bindings/clock/imx25-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt
@@ -157,5 +157,4 @@ uart1: serial@43f90000 {
interrupts = <45>;
clocks = <&clks 79>, <&clks 50>;
clock-names = "ipg", "per";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt
index cc05de9ec393574c740f77d1b74ed6694fcb9b80..4c95c048d3b294c154d0f2f7e0c1eb27fed01e14 100644
--- a/Documentation/devicetree/bindings/clock/imx27-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt
@@ -24,5 +24,4 @@ Examples:
clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt
index e6587af62ff0fe6e740ee8bdeb3f4b32d851c5de..d84a37d2885f6d2637e5285a9f69e904835287cc 100644
--- a/Documentation/devicetree/bindings/clock/imx28-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt
@@ -90,5 +90,4 @@ auart0: serial@8006a000 {
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
clocks = <&clks 45>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt
index 8163d565f697709d38e2f482adfa2ab385ebc64a..0a291090e56265090f0284b0a7823b8fb790780e 100644
--- a/Documentation/devicetree/bindings/clock/imx31-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.txt
@@ -87,5 +87,4 @@ uart1: serial@43f90000 {
interrupts = <45>;
clocks = <&clks 10>, <&clks 30>;
clock-names = "ipg", "per";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
index cadc4d29ada6663716c5135f78adcc3df902ee8e..a24ca9e582d2768380fef60819eb2e8820e6688c 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt
@@ -25,5 +25,4 @@ can1: can@53fc8000 {
interrupts = <82>;
clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
clock-names = "ipg", "per";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 9252912a5b0ea890668df648e092ca10c1da2164..aa0a4d423ef58d83e4107538779fa237d5eee27e 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -27,5 +27,4 @@ uart1: serial@02020000 {
interrupts = <0 26 0x04>;
clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
index 63f9d8277d48bb06a1b6b9c436865524764ab399..dff236f524a73844f95cf945397edc3143fcc205 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
@@ -66,7 +66,6 @@ clock@70110000 {
#clock-cells = <0>;
clock-output-names = "dfllCPU_out";
vdd-cpu-supply = <&vdd_cpu>;
- status = "okay";
nvidia,sample-rate = <12500>;
nvidia,droop-ctrl = <0x00000f00>;
diff --git a/Documentation/devicetree/bindings/clock/pxa-clock.txt b/Documentation/devicetree/bindings/clock/pxa-clock.txt
index 4b4a9024bd990bfa4b714b64f71a785da5494ea9..8f67239411fee74af684f01d0d73913ba6884963 100644
--- a/Documentation/devicetree/bindings/clock/pxa-clock.txt
+++ b/Documentation/devicetree/bindings/clock/pxa-clock.txt
@@ -12,5 +12,4 @@ Examples:
pxa2xx_clks: pxa2xx_clks@41300004 {
compatible = "marvell,pxa-clocks";
#clock-cells = <1>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
index 0cd894f987a38e8137acf03b3a441bfd5070d0c4..707a686d8d3e1341376b9f94de0296e43ba6c77b 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -81,5 +81,4 @@ Examples
dma-names = "tx", "rx";
power-domains = <&cpg>;
resets = <&cpg 310>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
index e4cdaf1cb3333012c797039c8aec1c7638ac5646..7cc4c0330b534660d97758ce9a7e8f304670db8a 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
@@ -44,5 +44,4 @@ Examples
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
power-domains = <&cpg_clocks>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
index bb51a33a1fbfbc9798be9800c1b865dda201de21..bb5d942075fbf0bf18fb9d924f34e3508fcf4298 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
@@ -50,5 +50,4 @@ Examples
clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
index 822505e715aeac3cc9a2b4dd9293fa4a4b6f248b..2632d3f130045ff4523b07f676ed126200cdd4b1 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
@@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock
interrupts = <1 23 3 4>, <1 23 4 4>;
clock-names = "uart", "clk_uart_baud2";
clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
index 2b430960ba472255373d94b067a0f161f73c9dad..21a8c23e658f3458167124a20a3f700b5a8566b2 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
@@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock
clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
<&clocks SCLK_UART>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
index e67bb05478afd27c40a8dac1a98c660e9dd27c24..985c0f574e9a831cbef4a874587eb12c133c7625 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
@@ -52,5 +52,4 @@ Example: UART controller node that consumes the clock generated by the clock
"clk_uart_baud3";
clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
<&clocks SCLK_UART>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt
index fa171dc4bd3ca4d4750fc9f711478ebcf06562b2..872ee8e0f041258956a22ae31a1c4d2236597166 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt
@@ -73,5 +73,4 @@ Example: UART controller node that consumes the clock generated by the clock
"clk_uart_baud3";
clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>,
<&clock SCLK_UART>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
index effd9401c13317934a38eeaa03e273a4c804d97e..15b48e20a061f8010a59209dadeca415b6d5dbb7 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
@@ -74,5 +74,4 @@ Example: UART controller node that consumes the clock generated by the clock
"clk_uart_baud1";
clocks = <&clocks UART0>, <&clocks UART0>,
<&clocks SCLK_UART0>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
index 28b28309f53575e91752cba6453e5594ea985de3..a6c4ef343b44cee72351805ad9bda8328e4e6a47 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
@@ -12,7 +12,11 @@ generators can be found in [1].
==I2C device node==
Required properties:
-- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}".
+- compatible: shall be one of the following:
+ "silabs,si5351a" - Si5351a, QFN20 package
+ "silabs,si5351a-msop" - Si5351a, MSOP10 package
+ "silabs,si5351b" - Si5351b, QFN20 package
+ "silabs,si5351c" - Si5351c, QFN20 package
- reg: i2c device address, shall be 0x60 or 0x61.
- #clock-cells: from common clock binding; shall be set to 1.
- clocks: from common clock binding; list of parent clock
diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
index 1e884c40ab5068dd22658c244f3d0cd59ebd0cce..4e59dc6b177897b3840388d7b192286e28d7e67b 100644
--- a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
@@ -14,10 +14,9 @@ Required properties:
- compatible: Must be "ti,k2g-sci-clk"
- #clock-cells: Shall be 2.
In clock consumers, this cell represents the device ID and clock ID
- exposed by the PM firmware. The assignments can be found in the header
- files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and
- <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc>
- is the SoC involved, for example 'k2g'.
+ exposed by the PM firmware. The list of valid values for the device IDs
+ and clocks IDs for 66AK2G SoC are documented at
+ http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
Examples:
--------
diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
index 585e8c191f50df4b2df1e13fb0cbd7dbde682bbf..10f7047755f39817d7d5bf3d4b369ebd46227fa0 100644
--- a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
+++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
@@ -81,13 +81,11 @@ atl: atl@4843c000 {
<&atl_clkin2_ck>, <&atl_clkin3_ck>;
clocks = <&atl_gfclk_mux>;
clock-names = "fck";
- status = "disabled";
};
#include <dt-bindings/clk/ti-dra7-atl.h>
&atl {
- status = "okay";
atl2 {
bws = <DRA7_ATL_WS_MCASP2_FSX>;
diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt
index 750442b65505cbcc8f4b0652c7082350c2c302a9..e85ecb510d56daad83ffbbe3572a96dc110a43a3 100644
--- a/Documentation/devicetree/bindings/clock/zx296702-clk.txt
+++ b/Documentation/devicetree/bindings/clock/zx296702-clk.txt
@@ -31,5 +31,4 @@ uart0: serial@0x09405000 {
reg = <0x09405000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&lsp1clk ZX296702_UART0_PCLK>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/zx296718-clk.txt b/Documentation/devicetree/bindings/clock/zx296718-clk.txt
index 4ad7038084074e405bdeb5a69a4c1fcccb210d6b..3a46bf0b2540cf7a6c6b565cc0cd47f2e9a0bdfa 100644
--- a/Documentation/devicetree/bindings/clock/zx296718-clk.txt
+++ b/Documentation/devicetree/bindings/clock/zx296718-clk.txt
@@ -34,5 +34,4 @@ usbphy0:usb-phy0 {
#phy-cells = <0>;
clocks = <&topclk USB20_PHY_CLK>;
clock-names = "phyclk";
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
index 6949e50f1f1696aa07f7e43c182ddb8d2bd4a2a1..76a0b4e80e83edd46510783274d834748eaff7a9 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
@@ -13,5 +13,4 @@ dcp@80028000 {
compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
reg = <0x80028000 0x2000>;
interrupts = <52 53>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
index 941bb6a6fb1304609bb3fa8a94520bfbdcca06f7..fbc07d12322f8020bc7a1ab282cd2eaffb587f9f 100644
--- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
+++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
@@ -23,5 +23,4 @@ Example:
interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
"eip";
clocks = <&cpm_syscon0 1 26>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt
index c6c6a4a045bde3b27f4442e7c97e551483d14064..28d3f2496b8925393669967c389433ca2af7f8e7 100644
--- a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt
+++ b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt
@@ -41,5 +41,4 @@ Examples:
clock-names = "cesa0", "cesa1";
marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>;
marvell,crypto-sram-size = <0x600>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt
index c0c35f00335bfe0e66994bff1bfb4540db5dfea3..d9b92e2f3138106c2fc11a4660a8bf2b5b8f39af 100644
--- a/Documentation/devicetree/bindings/crypto/mv_cesa.txt
+++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt
@@ -29,5 +29,4 @@ Examples:
interrupts = <22>;
marvell,crypto-srams = <&crypto_sram>;
marvell,crypto-sram-size = <0x600>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
index 096df34b11c162a84711f73ea426d86a6864f4a7..5e2ba385b8c9b9a6118af61c36c2a4e0b8463287 100644
--- a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
+++ b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
@@ -25,5 +25,4 @@ Examples:
clock-names = "aclk", "hclk", "sclk", "apb_pclk";
resets = <&cru SRST_CRYPTO>;
reset-names = "crypto-rst";
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt
index f2233138eba97a58172dfa6598846a07fe339680..001dd63979a974802fe69b6e72b12fe79c7c1c6b 100644
--- a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt
+++ b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt
@@ -15,5 +15,4 @@ Example:
rockchip,pmu = <&pmugrf>;
clocks = <&cru PCLK_DDR_MON>;
clock-names = "pclk_ddr_mon";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
index 7a9e8603c150805829485c639f0aee66a2c519be..d6d2833482c9b09ba1f7c664ea4952b8f2b63464 100644
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -205,5 +205,4 @@ Example:
rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>;
rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>;
rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt
index ecb8da063d07b82350060ff3ce8f3af9df35a549..1a21202778ee354af7e5fc1f3d9ce65b0a7a964a 100644
--- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt
+++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt
@@ -34,7 +34,6 @@ Example:
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
display = <&display0>;
- status = "okay";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
index ec94468b35beca724152ab48c4f7630e3383ef2c..82f2acb3d37406d0916b2a202d3d28cc64c5fc06 100644
--- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
+++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
@@ -23,7 +23,6 @@ Example:
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
- status = "disabled";
hlcdc-display-controller {
compatible = "atmel,hlcdc-display-controller";
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
index 7baa6582517e6d8844a245fbf1c58b15c36b2770..aacc8b92968c63670a62724c5cedf65eb49788cf 100644
--- a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+++ b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
@@ -33,7 +33,6 @@ stdp2690-ge-b850v3-fw required properties:
Example:
&mux2_i2c2 {
- status = "okay";
clock-frequency = <100000>;
stdp4028@73 {
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
index 81b68580e19995e5c292ce70d9f5395d5e30d8c3..cb7ffc58c564722a04e18c562e83155c2a051a57 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
@@ -43,7 +43,6 @@ Example:
clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
clock-names = "iahb", "isfr";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- status = "disabled";
ports {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt
index 6fa4ab668db52f57e4e64e76ef68aabea2013dbe..475008747801e64ed3577d74d22d1a57dee2cb4f 100644
--- a/Documentation/devicetree/bindings/display/fsl,tcon.txt
+++ b/Documentation/devicetree/bindings/display/fsl,tcon.txt
@@ -14,5 +14,4 @@ timing-controller@4003d000 {
reg = <0x4003d000 0x1000>;
clocks = <&clks VF610_CLK_TCON0>;
clock-names = "ipg";
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
index fa01db7eb66c5d79b433a8c9294374a2bdcbad5a..f79854783c2c342655b37e1ffc31cb3cb3f2a02e 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
@@ -116,7 +116,7 @@ Parallel display support
Required properties:
- compatible: Should be "fsl,imx-parallel-display"
Optional properties:
-- interface_pix_fmt: How this display is connected to the
+- interface-pix-fmt: How this display is connected to the
display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
and "lvds666".
- edid: verbatim EDID data block describing attached display.
diff --git a/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt
index 309c47f25b87f7a1f6b6e925cde6d52f096f891a..f79641bd5f18e013a69ff939aa81a3f8cb02de5f 100644
--- a/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt
+++ b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt
@@ -23,7 +23,6 @@ Example:
reg = <0x44000000 0x10000>;
interrupts = <17>;
clocks = <&clks CLK_LCD>;
- status = "okay";
port {
lcdc_out: endpoint {
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
index 5c70a8380e58d8d5d7854823baf53cb45ee69561..d0f55161579a55f6c83146929fb46b7ad40f7d96 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
@@ -18,6 +18,5 @@ Example:
power-supply = <...>;
backlight = <&backlight>;
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index 47665a12786ffc31fcf5d187100a031528f18429..43561584c13af152655a7afb9dd2ddc65574ad76 100644
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -59,7 +59,6 @@ Example:
pinctrl-names = "default";
pinctrl-0 = <&edp_hpd>;
- status = "disabled";
ports {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
index fad8b7619647661cac9de0df3a8bf1d0f1711074..adc94fc3c9f88543862821bbc0ac6f506f6cfc1c 100644
--- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
@@ -46,7 +46,6 @@ hdmi: hdmi@ff980000 {
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
clock-names = "iahb", "isfr";
- status = "disabled";
ports {
hdmi_in: port {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
index 543b07435f4fc5246032a0b12b3a0898e4b5527d..6bb59ab39f2f1ac1ebd587b49408608e1f32f92c 100644
--- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -36,7 +36,6 @@ Example:
resets = <&cru SRST_MIPIDSI0>;
reset-names = "apb";
rockchip,grf = <&grf>;
- status = "okay";
ports {
#address-cells = <1>;
@@ -65,6 +64,5 @@ Example:
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
backlight = <&backlight>;
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
index 8096a29f9776aa133249a51ac4b2b3912d507fab..cec21714f0e0a32ca8fc2e6079887e255f91175c 100644
--- a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
@@ -25,7 +25,6 @@ hdmi: hdmi@20034000 {
clock-names = "pclk";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_ctl>;
- status = "disabled";
hdmi_in: port {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt b/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt
index c46ba641a1df37f39241f68d2539302bfd389e2e..a9168ae6946c1d9f75993331ec24e7818f6e0a3c 100644
--- a/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt
@@ -28,6 +28,5 @@ chosen {
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
- status = "disabled";
};
};
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index 2ee6ff0ef98e7dcf6d16e977fa8dd852b10a247c..92441086cabad07cb9bfe44095cfbd605ef03e38 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -278,7 +278,6 @@ hdmi: hdmi@01c16000 {
<&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_DEDICATED 24>;
dma-names = "ddc-tx", "ddc-rx", "audio-tx";
- status = "disabled";
ports {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt
index 191d7bd8a6fefd412ce4e63f8e4e49401bcbbc82..97e213e07660816a2f81d19f400b104e09b1fe90 100644
--- a/Documentation/devicetree/bindings/dma/fsl-edma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt
@@ -72,5 +72,4 @@ sai2: sai@40031000 {
dma-names = "tx", "rx";
dmas = <&edma0 0 21>,
<&edma0 0 20>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt
index c075f5988135c75fa97c104b3e848b3f78b61242..0ffb4d8766a844a0bf82cf6fb08c2645ae6187e5 100644
--- a/Documentation/devicetree/bindings/dma/mv-xor.txt
+++ b/Documentation/devicetree/bindings/dma/mv-xor.txt
@@ -30,7 +30,6 @@ xor@d0060900 {
reg = <0xd0060900 0x100
0xd0060b00 0x100>;
clocks = <&coreclk 0>;
- status = "okay";
xor00 {
interrupts = <51>;
diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt
index 9bcab911598200b159ef0c032a95d20990cffd53..9d3b2f917b7b31ea0c9ac6ff7e545b5324b77005 100644
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
@@ -48,7 +48,6 @@ Each dmas request consists of 3 cells:
Example:
spi4: spi@1a280000 {
- status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
index 4775c66f4508c5c0dbdd1091495bc7ff95dc584b..a122723907acb9be6fce0bd236eaa5e8f26191ca 100644
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -63,7 +63,6 @@ Example:
compatible = "arm,pl011", "arm,primecell";
reg = <0xe0000000 0x1000>;
interrupts = <0 35 0x4>;
- status = "disabled";
dmas = <&dmahost 12 0 1>,
<&dmahost 13 0 1 0>;
dma-names = "rx", "rx";
diff --git a/Documentation/devicetree/bindings/dma/st_fdma.txt b/Documentation/devicetree/bindings/dma/st_fdma.txt
index 495d853c569b7d2ed4d40dfc9534d8291edcd6b1..52cfec9e77ad528287f7ff18670802162d2a72cf 100644
--- a/Documentation/devicetree/bindings/dma/st_fdma.txt
+++ b/Documentation/devicetree/bindings/dma/st_fdma.txt
@@ -69,7 +69,6 @@ Example:
sti_uni_player2: sti-uni-player@2 {
compatible = "st,sti-uni-player";
- status = "disabled";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
index 95800ab37bb00cce3fdfe2278625e6ba47cdec69..aa7dbd565ad0edddc0021b02c8f9d44e7f6b7438 100644
--- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
+++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt
@@ -135,5 +135,4 @@ Example:
<&dma 13 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "rx";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
index f1634a27a8300fc15de7fbff9a897ed987d7cd3b..3b484380c56a9ff468421667d5703bb29d1dc587 100644
--- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
@@ -40,7 +40,6 @@ Example:
clock-names = "ahb", "mod";
dmas = <&dma 1 29>, <&dma 1 28>;
dma-names = "rx", "tx";
- status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
index aead5869a28d9cbd71846caf6e94e7844adb9153..b849a1ed389d55df9662ca5708f8b93424b9ce88 100644
--- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
+++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
@@ -62,7 +62,6 @@ uart1: serial@4806a000 {
interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
- status = "disabled";
/* Requesting crossbar input 49 and 50 */
dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
dma-names = "tx", "rx";
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 18090e7226b40a063d8f32bfc6633edcba09dfee..33d9e386dc45c457de837fe8d7209b4302d54003 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -102,7 +102,6 @@ mcasp0: mcasp@48038000 {
reg-names = "mpu", "dat";
interrupts = <80>, <81>;
interrupt-names = "tx", "rx";
- status = "disabled";
/* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */
dmas = <&edma 8 2>,
<&edma 9 2>;
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
index 9766f7472f512fec9652fb15d8d74f1f1f5133c7..cfa4ed42b62f9bad7d4a5dd56f69b2eca94f4639 100644
--- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
+++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
@@ -31,7 +31,6 @@ Example for full FPGA configuration:
cell-index = <1>;
interrupts = <92>;
clocks = <&coreclk 0>;
- status = "okay";
fpga_mgr_spi: fpga-mgr@0 {
compatible = "xlnx,fpga-slave-serial";
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
index 4b6cc632ca5c53f38a98d23c22aca05e0d078781..69d46162d0f5ba385da868a0ce9240e2b34b06ee 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
@@ -23,7 +23,6 @@ gpio0: gpio@1100 {
#gpio-cells = <2>;
reg = <0x1100 0x080>;
interrupts = <78 0x8>;
- status = "okay";
};
Example of gpio-controller node for a ls2080a SoC:
diff --git a/Documentation/devicetree/bindings/gpio/spear_spics.txt b/Documentation/devicetree/bindings/gpio/spear_spics.txt
index 96c37eb15075c35d8f4cd2942aa91b97167ffa08..dd04d96e6ff1596d7c69ab0c94f9d389ab72137a 100644
--- a/Documentation/devicetree/bindings/gpio/spear_spics.txt
+++ b/Documentation/devicetree/bindings/gpio/spear_spics.txt
@@ -42,7 +42,6 @@ spics: spics@e0700000{
spi0: spi@e0100000 {
- status = "okay";
num-cs = <3>;
cs-gpios = <&gpio1 7 0>, <&spics 0>,
<&spics 1>;
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index 2b6243e730f690f9bbf2f0c50295b91c0699129f..b4ebd56d03f340a9e16752daedad188674ff4564 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -10,6 +10,7 @@ Required properties:
* And, optionally, one of the vendor specific compatible:
+ allwinner,sun4i-a10-mali
+ allwinner,sun7i-a20-mali
+ + allwinner,sun50i-h5-mali
+ amlogic,meson-gxbb-mali
+ amlogic,meson-gxl-mali
+ stericsson,db8500-mali
@@ -58,6 +59,10 @@ to specify one more vendor-specific compatible, among:
Required properties:
* resets: phandle to the reset line for the GPU
+ - allwinner,sun50i-h5-mali
+ Required properties:
+ * resets: phandle to the reset line for the GPU
+
- stericsson,db8500-mali
Required properties:
* interrupt-names and interrupts:
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
index b7e4c74445108dcd2c966529a85a4a930b40e831..f32bbba4d3bca902242049fabd1a2d92eca36cc5 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
@@ -51,7 +51,6 @@ Example for GK20A:
resets = <&tegra_car 184>;
reset-names = "gpu";
iommus = <&mc TEGRA_SWGROUP_GPU>;
- status = "disabled";
};
Example for GM20B:
@@ -70,7 +69,6 @@ Example for GM20B:
resets = <&tegra_car 184>;
reset-names = "gpu";
iommus = <&mc TEGRA_SWGROUP_GPU>;
- status = "disabled";
};
Example for GP10B:
@@ -89,5 +87,4 @@ Example for GP10B:
reset-names = "gpu";
power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
iommus = <&smmu TEGRA186_SID_GPU>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt
index c4f358dafdaa58c8a2d2c197789cf740a802202d..1e7959332dbcb2bff6954e35b401d307b202e4af 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt
+++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt
@@ -24,5 +24,4 @@ Example:
interrupts = <0 89 0>;
clocks = <&clock 177>, <&clock 277>;
clock-names = "sclk_fimg2d", "fimg2d";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
index f26625e4269363355d8e402299b3d3a91b88b793..b8eca3c7810dfb0ca184339537cd1e3e43383ac2 100644
--- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt
+++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
@@ -92,6 +92,5 @@ ssi-controller@48058000 {
interrupts = <69>,
<70>;
- status = "disabled"; /* second port is not used on N900 */
}
}
diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
index 7ce23ac6130808da6a7f621f1991b13f17f185d6..81b5d55086fa60a0118047ee9bec880c9cc8250a 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
@@ -102,7 +102,6 @@ And for clarification, here are the snipplets for the i2c-parents:
#address-cells = <1>;
#size-cells = <0>;
compatible = "i2c-gpio";
- status = "disabled";
gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */
&gpio5 5 GPIO_ACTIVE_HIGH /* scl */
>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
index 50b25c3da186e0f625c2715d123509820a8c98c1..3b30e54ae3c7a2aefb1afd760e623c132a4a5ce8 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
@@ -22,7 +22,6 @@ Example:
interrupts = <9>;
clocks = <&cmu clk_HFPERCLKI2C0>;
clock-frequency = <100000>;
- status = "ok";
energymicro,location = <3>;
eeprom@50 {
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
index 656716b72cc4d53362d997040339c4a5e45a13cb..f64064f8bdc25e5f0ee52c024fa1e2b8e36b8a5b 100644
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
@@ -71,5 +71,4 @@ Example:
reset-names = "i2c";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
index caaaed765ce4314977754eeb7edfe0da75418bfa..7b1b1e4086d4f1eb11a12bfba7a256e1aba86727 100644
--- a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
@@ -37,5 +37,4 @@ For example:
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
clock-names = "tsc_clk";
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
index 0bcae5140bc568b06b7a12a0f3a2d8ceb5f7b010..9ada5abd45fa05401cb9611d456a095583c07e53 100644
--- a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
@@ -17,5 +17,4 @@ adc0: adc@400e3000 {
clocks = <&ccu1 CLK_APB3_ADC0>;
vref-supply = <®_vdda>;
resets = <&rgu 40>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt
index 7d6647d4af5e4353c8acb630a3a99b64385001c8..42db783c4e7552b4e3eab7cc34fce4ec340413aa 100644
--- a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt
+++ b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt
@@ -16,5 +16,4 @@ dac: dac@400e1000 {
clocks = <&ccu1 CLK_APB3_DAC>;
vref-supply = <®_vdda>;
resets = <&rgu 42>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
index b77f50bd64036614a9cd50fc8e71592c8df197f6..262deab7358898ea8ae1a626bec492c64b148faf 100644
--- a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
+++ b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
@@ -72,7 +72,6 @@ Example:
/* Required Board specific properties */
keypad,num-rows = <5>;
keypad,num-columns = <5>;
- status = "okay";
linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */
MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt
index ee09c8f4474a2e2ccfca4fa6cd9830f94273b192..4c5312eaaa85a7894b04208cc34478c5e28abe00 100644
--- a/Documentation/devicetree/bindings/input/ti,drv260x.txt
+++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt
@@ -43,7 +43,7 @@ haptics: haptics@5a {
mode = <DRV260X_LRA_MODE>;
library-sel = <DRV260X_LIB_LRA>;
vib-rated-mv = <3200>;
- vib-overdriver-mv = <3200>;
+ vib-overdrive-mv = <3200>;
}
For more product information please see the link below:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
index 9d9e930f3251263fde538dfa1b1463796bd5c904..df531b5b6a0d2ff398dab162573aa46b38453158 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
@@ -32,5 +32,4 @@ Example:
pinctrl-1 = <&pinctrl_touchctrl_default>;
pinctrl-2 = <&pinctrl_touchctrl_gpios>;
vf50-ts-min-pressure = <200>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
index d4927c202aef271554022e5fd84451f1febe9212..e67e58b61706243153a2a70ebc5f4cc8cf66b643 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
@@ -35,5 +35,4 @@ Example:
measure-delay-time = <0xfff>;
pre-charge-time = <0xffff>;
touchscreen-average-samples = <32>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/media/pxa-camera.txt b/Documentation/devicetree/bindings/media/pxa-camera.txt
index 11f5b5d51af8c8c9c1bbb494e3a44b857f619bac..bc03ec096269dc60fb429bc4ef0409c472a39d4a 100644
--- a/Documentation/devicetree/bindings/media/pxa-camera.txt
+++ b/Documentation/devicetree/bindings/media/pxa-camera.txt
@@ -24,7 +24,6 @@ Example:
clock-frequency = <50000000>;
clock-output-names = "qci_mclk";
- status = "okay";
port {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt
index 1b1a10ba48cec34727000fe72efa89daf413d61e..6f3756da900f0fb56349e4d1854424637eb8cca9 100644
--- a/Documentation/devicetree/bindings/media/s5p-cec.txt
+++ b/Documentation/devicetree/bindings/media/s5p-cec.txt
@@ -33,5 +33,4 @@ hdmicec: cec@100B0000 {
hdmi-phandle = <&hdmi>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_cec>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
index 922d6f8e74be37c9992655402861af59ae8ff83a..e4e15d8d752157909e03344ee04ce7621ba5b967 100644
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
@@ -166,7 +166,6 @@ Example:
clock-output-names = "cam_a_clkout", "cam_b_clkout";
pinctrl-names = "default";
pinctrl-0 = <&cam_port_a_clk_active>;
- status = "okay";
#address-cells = <1>;
#size-cells = <1>;
@@ -189,7 +188,6 @@ Example:
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
interrupts = <0 85 0>;
- status = "okay";
};
csis_0: csis@11880000 {
diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
index cc51b1fd6e0cee6e7e6a17123be60f20b9c318f8..6af3fc210ecce9e84640631308d59d12ceb8ad38 100644
--- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
+++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
@@ -52,7 +52,6 @@ Example:
c8sectpfe@08a20000 {
compatible = "st,stih407-c8sectpfe";
- status = "okay";
reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
reg-names = "stfe", "stfe-ram";
interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>;
diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
index df7182a63e59aef757c58fd930279a400f7fb210..e47c7ccc57f11ec53fe9aa5eb28b4c48e6397a27 100644
--- a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
+++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
@@ -59,7 +59,6 @@ I2C-connected TVP5147 decoder:
tvp5147@5d {
compatible = "ti,tvp5147";
reg = <0x5d>;
- status = "okay";
port {
composite_in: endpoint {
diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
index 1ee3bc09f31982d3bf554e22972e4a6768920501..8b9388cc1ccc6d8884feaa115233ea099ff6907c 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
@@ -130,7 +130,6 @@ The reg property implicitly specifies the chip select as this:
Example:
devbus-bootcs@d0010400 {
- status = "okay";
ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf0000000, size 0x1000000 */
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
index 462819ac3da8f1cff2737fd7a5cf2b6906eb0c91..e6f168db6c723e018dc50389c5405dac614d1f0f 100644
--- a/Documentation/devicetree/bindings/mfd/act8945a.txt
+++ b/Documentation/devicetree/bindings/mfd/act8945a.txt
@@ -12,7 +12,6 @@ Example:
pmic@5b {
compatible = "active-semi,act8945a";
reg = <0x5b>;
- status = "okay";
active-semi,vsel-high;
@@ -79,6 +78,5 @@ Example:
active-semi,input-voltage-threshold-microvolt = <6600>;
active-semi,precondition-timeout = <40>;
active-semi,total-timeout = <3>;
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
index eec40be7f79a007005a2e835c1d73e59298a02bc..3f643ef121ff51ade6dd0205d5d3ec770cebf6f9 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
@@ -25,7 +25,6 @@ Example:
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
- status = "disabled";
hlcdc-display-controller {
compatible = "atmel,hlcdc-display-controller";
diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
index 57fa74e65664aa32b773e086bb10c76d8a9ac507..07c69c0c6624ce2e2d0adab034c4d10ce8b373e2 100644
--- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
+++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
@@ -37,7 +37,6 @@ Sub-nodes:
Examples:
i2c@63fc8000 { /* I2C1 */
- status = "okay";
pmic: dialog@48 {
compatible = "dlg,da9053-aa";
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
index 8aba48821a85a3284ac92a31c2c401922fad3744..39ba4146769deb9ab3549a0789bbb340e693e7ca 100644
--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -116,7 +116,6 @@ ecspi@70010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
<&gpio4 25 0>; /* GPIO4_25 */
- status = "okay";
pmic: mc13892@0 {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt
index 555fb117d4facd8dc8e7b60c84500d873b44f1cd..755cbef0647df9d07ac7921526f103b4736360c5 100644
--- a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt
+++ b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt
@@ -26,7 +26,6 @@ Example for i.MX23 SoC:
compatible = "fsl,imx23-lradc";
reg = <0x80050000 0x2000>;
interrupts = <36 37 38 39 40 41 42 43 44>;
- status = "okay";
fsl,lradc-touchscreen-wires = <4>;
fsl,ave-ctrl = <4>;
fsl,ave-delay = <2>;
@@ -39,7 +38,6 @@ Example for i.MX28 SoC:
compatible = "fsl,imx28-lradc";
reg = <0x80050000 0x2000>;
interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>;
- status = "okay";
fsl,lradc-touchscreen-wires = <5>;
fsl,ave-ctrl = <4>;
fsl,ave-delay = <2>;
diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
index df664018c148edf237fcc89e0a85b68c94c299e7..d759da606f757360d5498c92b41b713ffb66819c 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
+++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
@@ -57,7 +57,6 @@ audio-subsystem {
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
- status = "disabled";
};
serial_3: serial@11460000 {
@@ -69,6 +68,5 @@ audio-subsystem {
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
pinctrl-0 = <&uart_aud_bus>;
- status = "disabled";
};
};
diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index f8629bb7394578d8f1ae22123ee0da0179137270..f9fb412642fe09937adeeafd620859af858c0952 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -47,5 +47,4 @@ ssc0: ssc@f0010000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index 49df630bd44ff7af11a65cc2113697fb2bbeae77..60481bfc3d31e3d0167670deaa107118f76ef2c1 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -74,5 +74,4 @@ Example:
phys = <&emmc_phy>;
phy-names = "phy_arasan";
#clock-cells = <0>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
index e5a0140b2381c5663738b82ec3a6970513fe9b20..516fb0143d4c21d1c8e44a8846d55ea5458d7b74 100644
--- a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
@@ -24,7 +24,6 @@ mmc0: mmc@1c40000 {
compatible = "ti,da830-mmc",
reg = <0x40000 0x1000>;
interrupts = <16>;
- status = "okay";
bus-width = <4>;
max-frequency = <50000000>;
dmas = <&edma 16
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt
index db442355cd247457bc4f98a70afb4b27f87fc562..184ccffe273946dbb8f7e9c644fe135d55b8c7ee 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt
@@ -20,5 +20,4 @@ sdhci1: sdhci@10014000 {
dma-names = "rx-tx";
bus-width = <4>;
cd-gpios = <&gpio3 29>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.txt b/Documentation/devicetree/bindings/mmc/mmc-card.txt
index a70fcd65b9ea9b3d3f24dcb2c4969f9783bc6a43..8d2d71758907ecd403af09f17799722d6b3c616c 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-card.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-card.txt
@@ -21,7 +21,6 @@ Example:
vmmc-supply = <®_vcc3v3>;
bus-width = <8>;
non-removable;
- status = "okay";
mmccard: mmccard@0 {
reg = <0>;
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index c7f4a0ec48eda788359a06ce07e6330d932da9d5..b32ade645ad97cbc655dbd0b53b7a998905d6f7f 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -153,7 +153,6 @@ mmc3: mmc@01c12000 {
bus-width = <4>;
non-removable;
mmc-pwrseq = <&sdhci0_pwrseq>
- status = "okay";
brcmf: bcrmf@1 {
reg = <1>;
diff --git a/Documentation/devicetree/bindings/mmc/orion-sdio.txt b/Documentation/devicetree/bindings/mmc/orion-sdio.txt
index 84f0ebd67a130b990a0f0b80e475d2f30b3daac7..10f0818a34c59d9dfad7a5f2d80429fd1ebab7c3 100644
--- a/Documentation/devicetree/bindings/mmc/orion-sdio.txt
+++ b/Documentation/devicetree/bindings/mmc/orion-sdio.txt
@@ -13,5 +13,4 @@ Example:
reg = <0xd00d4000 0x200>;
interrupts = <54>;
clocks = <&gateclk 17>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
index 230fd696eb922fabc5820509a8f9c355f94a1f93..e35645598315ff6a685961a21ffda0d53ea5ed4f 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -63,7 +63,6 @@ Example:
mmc0: sdhci@fe81e000 {
compatible = "st,sdhci";
- status = "disabled";
reg = <0xfe81e000 0x1000>;
interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>;
interrupt-names = "mmcirq";
@@ -77,7 +76,6 @@ mmc0: sdhci@fe81e000 {
mmc1: sdhci@09080000 {
compatible = "st,sdhci-stih407", "st,sdhci";
- status = "disabled";
reg = <0x09080000 0x7ff>;
reg-names = "mmc";
interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
@@ -94,7 +92,6 @@ mmc1: sdhci@09080000 {
mmc0: sdhci@09060000 {
compatible = "st,sdhci-stih407", "st,sdhci";
- status = "disabled";
reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
reg-names = "mmc", "top-mmc-delay";
interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
index 906819a90c2bb6232f82f1549ea563c58132aec4..0f59bd5361f530c4c6b343a2b5a39396637940f5 100644
--- a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
@@ -28,5 +28,4 @@ Example:
max-frequency = <50000000>;
cap-sdio-irq;
cap-sd-highspeed;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
index 489807005eda5c477648585777561bffedafec92..b93c1e2f25dd62ac878be49ee24ad8d7b54a9c6f 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
@@ -24,7 +24,6 @@ spi@f0020000 {
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_default>;
- status = "okay";
m25p80@0 {
...
diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
index 5ded66ad7aef762c91b9436ec400380d505210af..840f9405dcf0736cc294c6432b8176421e34d609 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
@@ -37,7 +37,6 @@ nor_flash: spi@1100d000 {
clock-names = "spi", "sf";
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
flash@0 {
compatible = "jedec,spi-nor";
diff --git a/Documentation/devicetree/bindings/mtd/st-fsm.txt b/Documentation/devicetree/bindings/mtd/st-fsm.txt
index c2489391c437503bf24d550f56e7d45799ca3803..54cef9ef3083d90689b69d5ec5ffbd591a0e3ba1 100644
--- a/Documentation/devicetree/bindings/mtd/st-fsm.txt
+++ b/Documentation/devicetree/bindings/mtd/st-fsm.txt
@@ -21,6 +21,5 @@ Example:
st,syscfg = <&syscfg_rear>;
st,boot-device-reg = <0x958>;
st,boot-device-spi = <0x1a>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
index f322f56aef74eab778244c6ccaa5a5d4a4463e32..a37c67bcb43b6b8e35ce8215e734bd016e41199a 100644
--- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
@@ -41,7 +41,6 @@ nfc: nand@01c03000 {
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
- status = "okay";
nand@0 {
reg = <0>;
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt
index ad16c1f481f77fed199e1c24bc3450aa75fbb970..0bfad656a9ff26fc4f672e06f1123198bb9259e7 100644
--- a/Documentation/devicetree/bindings/net/brcm,amac.txt
+++ b/Documentation/devicetree/bindings/net/brcm,amac.txt
@@ -27,5 +27,4 @@ amac0: ethernet@18022000 {
<0x18110000 0x1000>;
reg-names = "amac_base", "idm_base";
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt
index 01fa2d4188d4a90048258229a9433792f1078b28..9c5e663fa1afccaf519ea0af0641b74eb198a483 100644
--- a/Documentation/devicetree/bindings/net/btusb.txt
+++ b/Documentation/devicetree/bindings/net/btusb.txt
@@ -29,7 +29,6 @@ Example:
Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt:
&usb_host1_ehci {
- status = "okay";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index 9e331777c2036ae6e2a9c685add8f32633aa77e7..78138333ff7a3611f8671a4372e08a0da55eddbc 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -56,7 +56,6 @@ m_can1: can@020e8000 {
<&clks IMX6SX_CLK_CANFD>;
clock-names = "hclk", "cclk";
bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
- status = "disabled";
};
Board dts:
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
index 0ab8b39d0b306d33c10c1d1f4f3211d09001c9f4..fd23904ac68e929adcc6657b6cde29ea4206fd7e 100644
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
@@ -24,7 +24,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0:
pinctrl-0 = <&pinctrl_spi_ksz>;
cs-gpios = <&pioC 25 0>;
id = <1>;
- status = "okay";
ksz9477: ksz9477@0 {
compatible = "microchip,ksz9477";
@@ -34,7 +33,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0:
spi-cpha;
spi-cpol;
- status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 04f2965a446768920ae90f846419d438773a633d..4448d063ddf6c96402d3773ba1280c37fb5b692e 100644
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -27,7 +27,6 @@ Example:
I2C managed mode:
master: masterdevice@X {
- status = "okay";
fixed-link { /* RMII fixed link to LAN9303 */
speed = <100>;
@@ -38,7 +37,6 @@ I2C managed mode:
switch: switch@a {
compatible = "smsc,lan9303-i2c";
reg = <0xa>;
- status = "okay";
reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
reset-duration = <200>;
@@ -67,7 +65,6 @@ I2C managed mode:
MDIO managed mode:
master: masterdevice@X {
- status = "okay";
phy-handle = <&switch>;
mdio {
diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt
index c1ce1680246f0134f08a8b1957d29d0f49f655ca..72e7aaf7242e6cbfd80b02c21fcda9e6a920536b 100644
--- a/Documentation/devicetree/bindings/net/ftgmac100.txt
+++ b/Documentation/devicetree/bindings/net/ftgmac100.txt
@@ -30,6 +30,5 @@ Example:
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
interrupts = <2>;
- status = "okay";
use-ncsi;
};
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index ae4234ca4ee44e91fbfc9a4a9fd0e9ba74368ca1..bedcfd5a52cd3966ea867e5ea4326e2aa4e11511 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -41,7 +41,6 @@ ethernet@70000 {
interrupts = <8>;
clocks = <&gate_clk 4>;
tx-csum-limit = <9800>
- status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
buffer-manager = <&bm>;
diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
index 9be1059ff03f00a54c3d7aec2311a90e2c05373f..3d27c68613a678b06c9c3013794fd709d40dc12e 100644
--- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
+++ b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
@@ -44,7 +44,6 @@ Example for SDIO device follows (calibration data is also available in
below example).
&mmc3 {
- status = "okay";
vmmc-supply = <&wlan_en_reg>;
bus-width = <4>;
cap-power-off-card;
@@ -70,7 +69,6 @@ below example).
Example for USB device:
&usb_host1_ohci {
- status = "okay";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt
index c1b1d7c3bde13a25afaa520fd5bb53438f2692e7..07b31050dbe51adf91d5decaaac3d973f64a962e 100644
--- a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt
+++ b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt
@@ -31,7 +31,6 @@ bm: bm@c8000 {
reg = <0xc8000 0xac>;
clocks = <&gateclk 13>;
internal-mem = <&bm_bppi>;
- status = "okay";
pool2,capacity = <4096>;
pool1,pkt-size = <512>;
};
@@ -45,5 +44,4 @@ bm_bppi: bm-bppi {
#address-cells = <1>;
#size-cells = <1>;
clocks = <&gateclk 13>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
index c78f3187dfeab24a4ed550887839c851fe1cdc45..7e2dad08a12e92c1baa0290116cbd032f5bb1e88 100644
--- a/Documentation/devicetree/bindings/net/marvell-pp2.txt
+++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt
@@ -57,12 +57,10 @@ ethernet@f0000 {
<0xc5000 0x100>;
clocks = <&gateclk 3>, <&gateclk 19>;
clock-names = "pp_clk", "gop_clk";
- status = "okay";
eth0: eth0@c4000 {
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
port-id = <0>;
- status = "okay";
phy = <&phy0>;
phy-mode = "gmii";
};
@@ -70,7 +68,6 @@ ethernet@f0000 {
eth1: eth1@c5000 {
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
port-id = <1>;
- status = "okay";
phy = <&phy3>;
phy-mode = "gmii";
};
diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt
index 0703ad3f3c1eba631905102c6f9b77c49cfb764e..354dd9896bb54bbe9cbcb7da56a659d5846f80b3 100644
--- a/Documentation/devicetree/bindings/net/meson-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt
@@ -66,5 +66,4 @@ Example for GXBB:
<&clkc CLKID_MPLL2>;
clock-names = "stmmaceth", "clkin0", "clkin1";
phy-mode = "rgmii";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
index c35b5b428a7f5f78f69d02dcadbbfd383bb38a0b..42a248301615d9e69915a424104f1fc932605175 100644
--- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
+++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
@@ -69,7 +69,6 @@ Examples:
};
};
ethernet@70000 {
- status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
diff --git a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
index 1dc3bc75539db2dc7b1e0c939ca87a55ab7a51c7..44dff53d4ddae7fdc635f07ce0d2ee5e8f1c2370 100644
--- a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
+++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
@@ -33,7 +33,6 @@ Example (for NXP i.MX28 with pin control stuff for GPIO irq):
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_b &spi2_sck_cfg>;
- status = "okay";
enc28j60: ethernet@0 {
compatible = "microchip,enc28j60";
diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt
index 76df9173825a00e39cca99a9a8c35bc51f2b57b8..c9b35251bb20d933f892bca518a7dc6752fa4c49 100644
--- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt
+++ b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt
@@ -25,7 +25,6 @@ Optional I2C-based chip specific properties:
Example (for ARM-based BeagleBoard Black with 88W8887 on UART5):
&uart5 {
- status = "okay";
nfcmrvluart: nfcmrvluart@5 {
compatible = "marvell,nfc-uart";
@@ -41,7 +40,6 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on UART5):
Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1):
&i2c1 {
- status = "okay";
clock-frequency = <400000>;
nfcmrvli2c0: i2c@1 {
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
index 5b6cd9b3f628aa3f266e03179f60d1b2447b30b6..92486733df714d9cdf72633470fb5e56542d64bd 100644
--- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
+++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
@@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):
&i2c2 {
- status = "okay";
npc100: npc100@29 {
diff --git a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
index 1aea822d4530aae3086e21fea9d9d7e45e96c33e..122460e42e3cfdcf47d525ef096085fb13667e01 100644
--- a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
+++ b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
@@ -15,7 +15,6 @@ Example (for ARM-based BeagleBone with PN532 on I2C2):
&i2c2 {
- status = "okay";
pn532: pn532@24 {
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
index dab69f36167c751a758b8b98de5e24033a6e9d88..538a86f7b2b0c99787792b1452f7a5595b079cb9 100644
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt
@@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with PN544 on I2C2):
&i2c2 {
- status = "okay";
pn544: pn544@28 {
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
index fb1e75facf1bacb4e609403eaea37deeb23dbdc7..ed5b3eaadb3926cddb26a8a5c09e59cf3f5072f5 100644
--- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
@@ -12,7 +12,6 @@ Required properties:
Example:
&hsi2c_4 {
- status = "okay";
s3fwrn5@27 {
compatible = "samsung,s3fwrn5-i2c";
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
index 263732e8879f1ecd249f7427c78583b40a24c913..b46d473be425e7f0cd533b195d43326f10924936 100644
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
@@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
&i2c2 {
- status = "okay";
st21nfcb: st21nfcb@8 {
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
index 711ca85a363d2e501cb2c936d4b16473aee30f30..54ce8e7ac6810a12f0c3100180a57c9defcbec6c 100644
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
@@ -19,7 +19,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4):
&mcspi4 {
- status = "okay";
st21nfcb: st21nfcb@0 {
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
index 7bb2e213d6f924ba7c3a908f726ec6b83b2c211d..5ee9440fa9ad7d0050855e4bfc5d8bf164fbdfa9 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
@@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
&i2c2 {
- status = "okay";
st21nfca: st21nfca@1 {
diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt
index ea3178bc9ddd5f85dc6bc02f1ac0b5060b44fb99..08a202e00d47beb1e9e3e7ff6337eb3b948f543b 100644
--- a/Documentation/devicetree/bindings/net/nfc/st95hf.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st95hf.txt
@@ -35,12 +35,10 @@ spi@9840000 {
#address-cells = <1>;
#size-cells = <0>;
cs-gpios = <&pio0 4>;
- status = "okay";
st95hf@0{
reg = <0>;
compatible = "st,st95hf";
- status = "okay";
spi-max-frequency = <1000000>;
enable-gpio = <&pio4 0>;
interrupt-parent = <&pio0>;
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
index 60c833d6218184fb54c1da368400fcdc71ccd9b4..5ca9362ef127dd8a28c5ad98df43d1a0f205d1b9 100644
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -23,7 +23,6 @@ Optional SoC Specific Properties:
Example (for ARM-based BeagleBone with TRF7970A on SPI1):
&spi1 {
- status = "okay";
nfc@0 {
compatible = "ti,trf7970a";
@@ -41,6 +40,5 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
irq-status-read-quirk;
en2-rf-quirk;
clock-frequency = <27120000>;
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
index df0534e2eda1a05da205b7ba580d7058a5a138fb..d7117a22fd870070950e2c6c811f244f2b8f2979 100644
--- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
@@ -35,5 +35,4 @@ etha: ethernet@40400000 {
/* Regmap for sys registers */
oxsemi,sys-ctrl = <&sys>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index d3c24d5ffa9ad6d10fb8d7439147c19f50ca478f..77d0b2a61ffa96fcd45375d62e9b911a4d6597df 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -2,11 +2,7 @@ PHY nodes
Required properties:
- - interrupts : <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and level
- information for the interrupt. This should be encoded based on
- the information in section 2) depending on the type of interrupt
- controller you have.
+ - interrupts : interrupt specifier for the sole interrupt.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- reg : The ID number for the phy, usually a small integer
@@ -61,7 +57,7 @@ Example:
ethernet-phy@0 {
compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22";
- interrupt-parent = <40000>;
- interrupts = <35 1>;
+ interrupt-parent = <&PIC>;
+ interrupts = <35 IRQ_TYPE_EDGE_RISING>;
reg = <0>;
};
diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt
index 6d9efb2eb9a53d4495943122e19c87b3f7f7a889..3987846b3fd302e2be1b3f9266d06a733aba06d6 100644
--- a/Documentation/devicetree/bindings/net/qca,qca7000.txt
+++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt
@@ -41,7 +41,6 @@ ssp2: spi@80014000 {
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
- status = "okay";
qca7000: ethernet@0 {
compatible = "qca,qca7000";
@@ -78,7 +77,6 @@ auart0: serial@8006a000 {
reg = <0x8006a000 0x2000>;
pinctrl-names = "default";
pinctrl-0 = <&auart0_2pins_a>;
- status = "okay";
qca7000: ethernet {
compatible = "qca,qca7000";
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
index c1325387632cb31555be0c81bae915a7e2fbad46..6af8eed1adeb1429cf9bdda435ac4e7ab27c5c21 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
@@ -71,5 +71,4 @@ gmac: ethernet@ff290000 {
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
};
diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
index 974edd5c85cc757322ad48d64cf64460cd0c7518..8b7c719b0bb94ecef956387b866bcb5fa7b39c58 100644
--- a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
+++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
@@ -15,7 +15,6 @@ smsc phy with disabled energy detect mode on an am335x based board.
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethernetphy0: ethernet-phy@0 {
reg = <0>;
diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
index 2e68a3cd851350fd9177d3ee8f5451090ad79e60..b30d04b54ee94f93910421caca3badda8fcae01e 100644
--- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
@@ -40,7 +40,6 @@ gmii_to_sgmii_converter: phy@0x100000240 {
gmac0: ethernet@ff700000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x60 0>;
- status = "disabled";
reg = <0xff700000 0x2000>;
interrupts = <0 115 4>;
interrupt-names = "macirq";
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
index d05c1e1fd9b6f05a763efbeb18179d43ac35a50c..062c5174add3263d54a00fb1083fbfd810164f83 100644
--- a/Documentation/devicetree/bindings/net/sti-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -34,7 +34,6 @@ Example:
ethernet0: dwmac@9630000 {
device_type = "network";
- status = "disabled";
compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
reg = <0x9630000 0x8000>;
reg-names = "stmmaceth";
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
index c35afb7e956a7120859128bae4cc6de3a80967aa..489dbcb66c5a273df0d444dee4f0a3a280bf8f83 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
@@ -18,7 +18,6 @@ Example:
ethernet@40028000 {
compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
- status = "disabled";
reg = <0x40028000 0x8000>;
reg-names = "stmmaceth";
interrupts = <0 61 0>, <0 62 0>;
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
index 590f622188de8874586a1b11772f82c4f17f100c..b2bd4704f85928fe96ad43a6c9005d9f43b98907 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
@@ -29,7 +29,6 @@ mmc3: mmc@01c12000 {
vmmc-supply = <®_vmmc3>;
bus-width = <4>;
non-removable;
- status = "okay";
brcmf: wifi@1 {
reg = <1>;
diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
index 19331bb4ff6e27c3c08fe8883ba5ab363764999b..6830c4786f8ab82d658067b0a16587b436f02abd 100644
--- a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
+++ b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
@@ -21,7 +21,6 @@ Example:
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
- status = "okay";
esp8089: sdio_wifi@1 {
compatible = "esp,esp8089";
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
index 0854451ff91d79a2f4b224abc3f3c5b4ebee9496..59de8646862d9dc1706a64cd2c79a5c4828de76b 100644
--- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
+++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
@@ -48,7 +48,6 @@ IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured
so that firmware can wakeup host using this device side pin.
&mmc3 {
- status = "okay";
vmmc-supply = <&wlan_en_reg>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
index 7b2cbb14113efa83ffee7cb318c33723dfcc956e..f42f6b0f1bc7d5edd3000edea72f90565e79d542 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
@@ -31,7 +31,6 @@ clock, new bindings (for parsing the clock nodes) have to be added.
Example:
&mmc3 {
- status = "okay";
vmmc-supply = <&wlan_en_reg>;
bus-width = <4>;
cap-power-off-card;
diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
index 74cf52908a6cbe2bb1cdb56148fc0b8fd5971070..0668c45a156d3324fa41f920870b72057fb9567c 100644
--- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
+++ b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
@@ -3,7 +3,10 @@
This binding is intended to represent MTK-EFUSE which is found in most Mediatek SOCs.
Required properties:
-- compatible: should be "mediatek,mt8173-efuse" or "mediatek,efuse"
+- compatible: should be
+ "mediatek,mt7622-efuse", "mediatek,efuse": for MT7622
+ "mediatek,mt7623-efuse", "mediatek,efuse": for MT7623
+ "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173
- reg: Should contain registers location and length
= Data cells =
diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt
index daebce9e6b07f470b4ddad31798a67dfb7ecf976..372c72fd64dcdf70b258f41993400e55e44fd65c 100644
--- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt
+++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt
@@ -21,5 +21,4 @@ Example for i.MX28:
#size-cells = <1>;
reg = <0x8002c000 0x2000>;
clocks = <&clks 25>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index e36d261b9ba6427518487b2f7fcbc4692a80a648..9d733af26be7161ac332a187887d244b41e4f211 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -464,7 +464,6 @@ Example 5: opp-supported-hw
opp_table {
compatible = "operating-points-v2";
- status = "okay";
opp-shared;
opp-600000000 {
diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
index bbcd9f4c501fb2b0aa59a85420acfb2ec6eb38d1..310ef7145c47e1b2068648ceb21d190ec1d0aca5 100644
--- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt
+++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
@@ -33,7 +33,6 @@ Example:
pcie0: pcie@d0070000 {
compatible = "marvell,armada-3700-pcie";
device_type = "pci";
- status = "disabled";
reg = <0 0xd0070000 0 0x20000>;
#address-cells = <3>;
#size-cells = <2>;
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index a339dbb154933282ee06aaeec0571e0d95a72b42..7a579c816951501137b2005272714a973fd439c8 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -40,7 +40,6 @@ Hip05 Example (note that Hip06 is the same except compatible):
0x0 0 0 2 &mbigen_pcie 2 11
0x0 0 0 3 &mbigen_pcie 3 12
0x0 0 0 4 &mbigen_pcie 4 13>;
- status = "ok";
};
HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
@@ -83,5 +82,4 @@ Example:
0x0 0 0 2 &mbigen_pcie0 650 4
0x0 0 0 3 &mbigen_pcie0 650 4
0x0 0 0 4 &mbigen_pcie0 650 4>;
- status = "ok";
};
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
index 2de6f65ecfb11017e31a3313cdc07fce0c9dbb00..9c7fce69570b66c824a032c3655785dc11843810 100644
--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -85,7 +85,6 @@ Example:
pcie-controller {
compatible = "marvell,armada-xp-pcie";
- status = "disabled";
device_type = "pci";
#address-cells = <3>;
@@ -147,7 +146,6 @@ pcie-controller {
/* wait 20ms for device settle after reset deassertion */
reset-delay-us = <20000>;
clocks = <&gateclk 5>;
- status = "disabled";
};
pcie@2,0 {
@@ -164,7 +162,6 @@ pcie-controller {
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 6>;
- status = "disabled";
};
pcie@3,0 {
@@ -181,7 +178,6 @@ pcie-controller {
marvell,pcie-port = <0>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 7>;
- status = "disabled";
};
pcie@4,0 {
@@ -198,7 +194,6 @@ pcie-controller {
marvell,pcie-port = <0>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 8>;
- status = "disabled";
};
pcie@5,0 {
@@ -215,7 +210,6 @@ pcie-controller {
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 9>;
- status = "disabled";
};
pcie@6,0 {
@@ -232,7 +226,6 @@ pcie-controller {
marvell,pcie-port = <1>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 10>;
- status = "disabled";
};
pcie@7,0 {
@@ -249,7 +242,6 @@ pcie-controller {
marvell,pcie-port = <1>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 11>;
- status = "disabled";
};
pcie@8,0 {
@@ -266,7 +258,6 @@ pcie-controller {
marvell,pcie-port = <1>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 12>;
- status = "disabled";
};
pcie@9,0 {
@@ -283,7 +274,6 @@ pcie-controller {
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 26>;
- status = "disabled";
};
pcie@10,0 {
@@ -300,6 +290,5 @@ pcie-controller {
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 27>;
- status = "disabled";
};
};
diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
index 598533a57d79bc0155e456fdd3bac0a715b661c6..6b115fd10fec81720800b2b7d424097a18dae6b0 100644
--- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt
+++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
@@ -34,5 +34,4 @@ Example:
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clocks = <&cpm_syscon0 1 13>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
index 50f9e2ca5b13dd6677aca086437c24e2aadeb750..c77981c5dd18f6edff3affcb40cd88720633b5db 100644
--- a/Documentation/devicetree/bindings/pci/pci.txt
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -1,12 +1,12 @@
PCI bus bridges have standardized Device Tree bindings:
PCI Bus Binding to: IEEE Std 1275-1994
-http://www.firmware.org/1275/bindings/pci/pci2_1.pdf
+http://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf
And for the interrupt mapping part:
Open Firmware Recommended Practice: Interrupt Mapping
-http://www.firmware.org/1275/practice/imap/imap0_9d.pdf
+http://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf
Additionally to the properties specified in the above standards a host bridge
driver implementation may support the following properties:
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index bd27428dda619d613a1af05dbd583b743c0e6c22..a7e3dd43b2a8a5ff58f61d16ce3138d1a7f9022a 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -54,5 +54,4 @@ SoC specific DT Entry:
interrupt-map = <0 0 0 0 &gic 0 116 4>;
clocks = <&mstp3_clks R8A7791_CLK_PCIE>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
index 36d881c8e6d448e835430bfe227bdad85ed54b1a..54bac7f8860c02fa10cde3f241863a0db00d347a 100644
--- a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
+++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
@@ -44,7 +44,6 @@ SoC DTSI:
+ PCIe controller node with msi-parent property pointing to MSI node:
pcie0: pcie@1f2b0000 {
- status = "disabled";
device_type = "pci";
compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
#interrupt-cells = <1>;
diff --git a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt
index 5f3a65a9dd885be01826435c69f35a7989348bd5..e1bb12711fbf8266bccecde2cbac1cf39ea29b94 100644
--- a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt
+++ b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt
@@ -61,19 +61,16 @@ Example:
compatible = "apm,xgene-phy";
reg = <0x0 0x1f21a000 0x0 0x100>;
#phy-cells = <1>;
- status = "disabled";
};
phy2: phy@1f22a000 {
compatible = "apm,xgene-phy";
reg = <0x0 0x1f22a000 0x0 0x100>;
#phy-cells = <1>;
- status = "ok";
};
phy3: phy@1f23a000 {
compatible = "apm,xgene-phy";
reg = <0x0 0x1f23a000 0x0 0x100>;
#phy-cells = <1>;
- status = "ok";
};
diff --git a/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt
index f37b3a86341d9d47e1c3d8b6e468b287e27bb6cb..300830dda0bf2f72a5e70308ed7e4ff85c4457c3 100644
--- a/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt
@@ -16,5 +16,4 @@ usb_phy: usb_phy@2620738 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x2620738 32>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
index faf18084a33ad09411d0a17fdd7ac5d029eb3932..41e09ed2ca70e2caaf7ee65b2f67651fba7bb9f4 100644
--- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
@@ -51,14 +51,12 @@ u3phy: usb-phy@11290000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
- status = "okay";
u2port0: usb-phy@11290800 {
reg = <0 0x11290800 0 0x100>;
clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
clock-names = "ref";
#phy-cells = <1>;
- status = "okay";
};
u3port0: usb-phy@11290900 {
@@ -66,7 +64,6 @@ u3phy: usb-phy@11290000 {
clocks = <&clk26m>;
clock-names = "ref";
#phy-cells = <1>;
- status = "okay";
};
u2port1: usb-phy@11291000 {
@@ -74,7 +71,6 @@ u3phy: usb-phy@11290000 {
clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
clock-names = "ref";
#phy-cells = <1>;
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu.txt b/Documentation/devicetree/bindings/phy/phy-mvebu.txt
index f95b6260a3b3d148570a06e7a5e08d9659794661..64afdd13d91dfd4a9f1f299d632b64689f8a8b8d 100644
--- a/Documentation/devicetree/bindings/phy/phy-mvebu.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu.txt
@@ -18,7 +18,6 @@ Example:
clocks = <&gate_clk 15>;
clock-names = "sata";
#phy-cells = <0>;
- status = "ok";
};
Armada 375 USB cluster
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
index a67ef2a3874f43bc55d6a013298fa72743d89714..074a7b3b0425ddadac96079d0cdd83f7f9352582 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -67,14 +67,12 @@ grf: syscon@ff770000 {
<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "otg-id", "otg-bvalid", "linestate";
- status = "okay";
};
u2phy_host: host-port {
#phy-cells = <0>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "linestate";
- status = "okay";
};
};
};
diff --git a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
index 86f2dbe07ed42f5013f97e3c13453c9d3074fabc..a1697c27aecde4f3e0f7633c700f4e8c20eab4b4 100644
--- a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
@@ -25,7 +25,6 @@ Example:
clock-names = "ref";
#phy-cells = <0>;
- status = "ok";
};
phy@100f8830 {
@@ -35,5 +34,4 @@ Example:
clock-names = "ref";
#phy-cells = <0>;
- status = "ok";
};
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
index ab80bfe31cb339fc9f617463212a99db7519ea0a..1c40ccd40ce4402735d72ad80dc4d3c28f44eb1f 100644
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -82,7 +82,6 @@ usbphy: phy@125b0000 {
reg = <0x125b0000 0x100>;
clocks = <&clock 305>, <&clock 2>;
clock-names = "phy", "ref";
- status = "okay";
#phy-cells = <1>;
samsung,sysreg-phandle = <&sys_reg>;
samsung,pmureg-phandle = <&pmu_reg>;
diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt
index 1cca85c709d1bc281bd25abd790a7f4f5a935260..f9853156e311fb1180a373cb8ed93a293ff59c9b 100644
--- a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt
@@ -33,6 +33,5 @@ Example:
clock-names = "hsic_480M", "hsic_12M", "phy";
resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
reset-names = "hsic", "phy";
- status = "disabled";
#phy-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index 590e60378be30dd8ff6838b6a7923dfc2a761b09..3e23fece99dabda20f18e649b708702524e02454 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -148,5 +148,4 @@ dbgu: serial@fffff200 {
interrupts = <1 4 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
index 9fde25f1401a55b64b8b3fa80f27f9310e7cb706..42d74f8a1bccfea6c2f701af9c9f63dad04e975f 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
@@ -61,7 +61,6 @@ Examples:
usdhc@0219c000 { /* uSDHC4 */
non-removable;
vmmc-supply = <®_3p3v>;
- status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4_1>;
};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
index 8c5d27c5b56217e469acf4322309739d7ff50dea..6666277c3acb72988131d13e3d176b78956a727a 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
@@ -61,7 +61,6 @@ iomuxc-lpsr controller and SDA pad from iomuxc controller as:
i2c1: i2c@30a20000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1 &pinctrl_i2c1_2>;
- status = "okay";
};
iomuxc-lpsr@302c0000 {
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
index f2abdaee902260f6cb4bca18e6546b56150cc3f2..e0e886b7352783da41b93270b425aef5232ba59e 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
@@ -56,5 +56,4 @@ Example:
pinctrl-0 = <&state_dpaux_i2c>;
pinctrl-1 = <&state_dpaux_off>;
pinctrl-names = "default", "idle";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt
index 09e81a95bbfd34a48b381830b34b8cfa154dba3c..b1159434f593285b3299fb0ee0b38486078e6b4c 100644
--- a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt
@@ -50,7 +50,6 @@ uart2: serial@900000 {
reg-io-width = <1>;
current-speed = <115200>;
no-loopback-test;
- status = "disabled";
resets = <&reset 22>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
index e219849b21cac82069881fc6101cb8554bbfa685..39170f372599b2a95f5ce23db7a33967387f8ea7 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
@@ -81,5 +81,4 @@ pmm: pin-controller@1462000 {
&vga {
pinctrl-names = "default";
pinctrl-0 = <&vga_pins>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
index f4d127df980dccbc8826d204c650d90557c64f62..9b4f8041c36a62e7cdb4ddd77935e49c20dd8859 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -112,7 +112,7 @@ Examples
Example 1: SH73A0 (SH-Mobile AG5) pin controller node
- pfc: pfc@e6050000 {
+ pfc: pin-controller@e6050000 {
compatible = "renesas,pfc-sh73a0";
reg = <0xe6050000 0x8000>,
<0xe605801c 0x1c>;
@@ -173,5 +173,4 @@ Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device
bus-width = <8>;
vmmc-supply = <®_1p8v>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
index 58b7921b4fed97d4b4da1f9b46eff5d0029cc7d8..4864e3a74de311ff02e6f3c54a04ae2fbba5ae2d 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
@@ -121,7 +121,6 @@ uart2: serial@20064000 {
reg-shift = <2>;
reg-io-width = <1>;
clocks = <&mux_uart2>;
- status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart2_xfer>;
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index d907a74f8dc0a5ee98d87118232fb20580c0fba3..33e3d3c475526e404a8b03c7769aa66d61b88e3e 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
@@ -180,5 +180,4 @@ pin-controller {
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt
index 4f7a3bc9c4073cc501218a3b1fc474826813ceb2..e45affea80781292316c75ed387ba38402501c5b 100644
--- a/Documentation/devicetree/bindings/power/power-controller.txt
+++ b/Documentation/devicetree/bindings/power/power-controller.txt
@@ -13,6 +13,5 @@ Example:
act8846: act8846@5 {
compatible = "active-semi,act8846";
- status = "okay";
system-power-controller;
}
diff --git a/Documentation/devicetree/bindings/power/reset/st-reset.txt b/Documentation/devicetree/bindings/power/reset/st-reset.txt
index 83734dc3a389771ea061d9c71f4a00c7589e5fcf..b63948737d806913bd24bfe57d7650dae63f2caa 100644
--- a/Documentation/devicetree/bindings/power/reset/st-reset.txt
+++ b/Documentation/devicetree/bindings/power/reset/st-reset.txt
@@ -8,5 +8,4 @@ Example node:
restart {
compatible = "st,stih407-restart";
st,syscfg = <&syscfg_sbc_reg>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
index de78d761ce44e1931aa060e34e085126143321e4..b86ecada4f84be501f8523d59fe9185df1499994 100644
--- a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
@@ -29,7 +29,6 @@ Example:
pmic@5b {
compatible = "active-semi,act8945a";
reg = <0x5b>;
- status = "okay";
charger {
compatible = "active-semi,act8945a-charger";
@@ -43,6 +42,5 @@ Example:
active-semi,input-voltage-threshold-microvolt = <6600>;
active-semi,precondition-timeout = <40>;
active-semi,total-timeout = <3>;
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/power/supply/max8903-charger.txt b/Documentation/devicetree/bindings/power/supply/max8903-charger.txt
index f0f4e12b076ef8214688a292e6bbe34987b02f54..bab947fef025e5250a299934877800c1881c8799 100644
--- a/Documentation/devicetree/bindings/power/supply/max8903-charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/max8903-charger.txt
@@ -21,5 +21,4 @@ Example:
flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt
index e03e85ae657261f158ee719d4c3cc69336c81765..d6e8dfd0a581fee2005a80f92c5e717b21068a5d 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt
@@ -12,7 +12,6 @@ Example:
clock-frequency = <50000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
max14656@35 {
compatible = "maxim,max14656";
diff --git a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
index 7c04e22a5d6af016fe8198d2d6d955011abc2173..6b1075ee8a3025f58c0609da564521afbec70ff7 100644
--- a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
+++ b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
@@ -16,5 +16,4 @@ Example:
ptp: ptp-dte@180af650 {
compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte";
reg = <0x180af650 0x10>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt
index 5b07bebbf6f7d9855733a4df0bacd6c057c1e87b..1ee81321c35e792ded427994001aef24be69f931 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-meson.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-meson.txt
@@ -19,7 +19,6 @@ Example:
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08550 0x0 0x10>;
#pwm-cells = <3>;
- status = "disabled";
clocks = <&xtal>, <&xtal>;
clock-names = "clkin0", "clkin1";
}
diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt
index f1cbeefb30870c0e5ec5479c9582e88711ed5e21..c5171660eaf9823ec6704ee17a784807016e7e50 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt
@@ -19,5 +19,4 @@ Example:
reg = <0x01c20e00 0xc>;
clocks = <&osc24M>;
#pwm-cells = <3>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
index 1a5d7b71db89ca07092c9b15e1ebed90fdbc4f6b..4633697fbda1f53a1e897663bfc53cf602cb8ad9 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
@@ -26,7 +26,6 @@ epwmss0: epwmss@48300000 { /* PWMSS for am33xx */
ti,hwmods = "epwmss0";
#address-cells = <1>;
#size-cells = <1>;
- status = "disabled";
ranges = <0x48300100 0x48300100 0x80 /* ECAP */
0x48300180 0x48300180 0x80 /* EQEP */
0x48300200 0x48300200 0x80>; /* EHRPWM */
@@ -40,7 +39,6 @@ epwmss0: epwmss@48300000 { /* PWMSS for am4372 */
ti,hwmods = "epwmss0";
#address-cells = <1>;
#size-cells = <1>;
- status = "disabled";
ranges = <0x48300100 0x48300100 0x80 /* ECAP */
0x48300180 0x48300180 0x80 /* EQEP */
0x48300200 0x48300200 0x80>; /* EHRPWM */
diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
index 6067d9830d07d4d21bd27ee715630d2e9ad7e073..3ae9f1088845ba4fecf43b90102256317f4b71e8 100644
--- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
@@ -52,7 +52,6 @@ Example:
compatible = "active-semi,act8865";
reg = <0x5b>;
active-semi,vsel-high;
- status = "disabled";
regulators {
vcc_1v8_reg: DCDC_REG1 {
diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
index 5c80a7779552a18ca9d273207bf96cf571237acb..ac955dea00d16c50a89a75922672030dde122cbe 100644
--- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
@@ -23,7 +23,6 @@ Example:
pmic@5b {
compatible = "active-semi,act8945a";
reg = <0x5b>;
- status = "okay";
active-semi,vsel-high;
diff --git a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
index b4e96a27844527cc7bda3081d59a5fe61d5492d4..05d5be48dae44d39a165a257d915348c406a8008 100644
--- a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
+++ b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
@@ -80,5 +80,4 @@ mac: ethernet@40010000 {
clock-names = "stmmaceth";
resets = <&rgu 22>;
reset-names = "stmmaceth";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
index 0a4c371a9b7a8ac46eb7db378da1ad1b117723d1..a66692a08acedd13b199bb7865542db6db20e425 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
@@ -45,5 +45,4 @@ Example:
interrupts = <17 1>;
interrupt-names = "alarm";
st,syscfg = <&pwrcfg>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
index 2a42a323fa1a20d1dd85fcde820166db5f976f91..b6a869f977152f37153cc871f4ac8fc7a4d84ba9 100644
--- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
@@ -85,5 +85,4 @@ Example:
<366 1>,<367 1>/* cq30-31 */
<376 4>,/* fatal ecc */
<381 4>;/* fatal axi */
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
index 3ad115efed1ef90179d094ed8cb8e765802af870..6a4e0d30d8c4bba28846702eda765237e72d8b18 100644
--- a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
@@ -19,7 +19,6 @@ Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2):
&i2c2 {
- status = "okay";
st33zp24: st33zp24@13 {
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
index 158b0165e01cb75f2b184bb0fd0e65b759b26307..604dce901b605f2e922f44fd4eee7cc0f98f1430 100644
--- a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
@@ -18,7 +18,6 @@ Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4):
&mcspi4 {
- status = "okay";
st33zp24@0 {
diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
index 8cb638b7e89c399da1ad937e98720b0814b8c9e4..3eca6de6369d773ef70bba048345aaed1d2737df 100644
--- a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
+++ b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
@@ -17,5 +17,4 @@ tpm@57 {
compatible = "nuvoton,npct650", "nuvoton,npct601";
linux,sml-base = <0x7f 0xfd450000>;
linux,sml-size = <0x10000>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt
index 85741cd468cce55a237f2f58e26145b5381dd47c..b800667da92b82555d74a194b65d201dda86da61 100644
--- a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt
+++ b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt
@@ -13,7 +13,6 @@ Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4):
&mcspi4 {
- status = "okay";
tpm_tis@0 {
diff --git a/Documentation/devicetree/bindings/serial/arc-uart.txt b/Documentation/devicetree/bindings/serial/arc-uart.txt
index 5cae2eb686f891026ff254098ee458032d12b9b3..256cc150ca7e55fb2c077f5c72db964dfeb891bb 100644
--- a/Documentation/devicetree/bindings/serial/arc-uart.txt
+++ b/Documentation/devicetree/bindings/serial/arc-uart.txt
@@ -15,7 +15,6 @@ arcuart0: serial@c0fc1000 {
interrupts = <5>;
clock-frequency = <80000000>;
current-speed = <115200>;
- status = "okay";
};
Note: Each port should have an alias correctly numbered in "aliases" node.
diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
index 51b3c9e80ad960e27efdc53ee0b85bab431185a4..048c3818c8262788745fdf6f30b21968b97be825 100644
--- a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
+++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
@@ -15,7 +15,6 @@ serial@b00260000 {
compatible = "axis,etraxfs-uart";
reg = <0xb0026000 0x1000>;
interrupts = <68>;
- status = "disabled";
dtr-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>;
dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>;
rng-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>;
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
index c93a2d1c1a654e3a618a4976086aa8d145903da1..d7edf732eb7f5716f8feb5e9d8398cb8a3ac1dbc 100644
--- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
@@ -33,5 +33,4 @@ serial@70006000 {
reset-names = "serial";
dmas = <&apbdma 8>, <&apbdma 8>;
dma-names = "rx", "tx";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
index d5f73b8f614fcc6d51d7d958fadd33f72dfecb3d..9d098cf73b533171be76b3caaa10ec4532f38cfd 100644
--- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
@@ -72,13 +72,10 @@ Examples:
};
uarta: serial@12490000 {
- status = "ok";
};
uartb: serial@16340000 {
- status = "ok";
};
uartc: serial@1a240000 {
- status = "ok";
};
diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt
index b542a0ecf06e897b4d4c87fdff1dab6dbd82c513..863c2893759e715161db4e00df15a2643031cf4b 100644
--- a/Documentation/devicetree/bindings/serial/serial.txt
+++ b/Documentation/devicetree/bindings/serial/serial.txt
@@ -43,7 +43,6 @@ Examples:
rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- status = "okay";
};
scifa4: serial@e6c80000 {
@@ -54,5 +53,4 @@ Examples:
clock-names = "fck";
power-domains = <&pd_a3sp>;
uart-has-rtscts;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt
index 362a76925bcdfef2fac5a3e339dad92449d13199..f311472990a7e5f081dad3cdba160e2d5edc7abc 100644
--- a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt
+++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt
@@ -19,5 +19,4 @@ Example:
reg = <0x01c2a000 0x400>;
interrupts = <0 62 4>;
clocks = <&apb1_gates 6>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
index 2f5ede39bea2d1d3cffacbcbe0ed103a7d2c708a..fe1855f09dcc36f765e3a48760001db0f9b79361 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
@@ -78,7 +78,6 @@ Example for APQ8064:
interrupts = <0 152 0x0>;
clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
clock-names = "core", "iface";
- status = "ok";
};
};
diff --git a/Documentation/devicetree/bindings/sound/armada-370db-audio.txt b/Documentation/devicetree/bindings/sound/armada-370db-audio.txt
index bf984d238620c2cc30cbda20f48bf58135138d3f..953c092db72f044fb461f9f674e445db692e3478 100644
--- a/Documentation/devicetree/bindings/sound/armada-370db-audio.txt
+++ b/Documentation/devicetree/bindings/sound/armada-370db-audio.txt
@@ -23,5 +23,4 @@ Example:
compatible = "marvell,a370db-audio";
marvell,audio-controller = <&audio_controller>;
marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
index fdb25b49251430f23d8efeb0ca43f62493e8b679..9d049d4bfd58f5ab6d1d56cf19956f7615668b6b 100644
--- a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
+++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
@@ -45,7 +45,6 @@ Example:
&ssc0 {
#sound-dai-cells = <0>;
- status = "okay";
};
&i2c {
diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
index b139e66d2a1122a3f2dc0e38c9929bdba8cdeed7..630bf7c0344d1a459050ed3904de8a5f08f68904 100644
--- a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
+++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
@@ -47,21 +47,17 @@ Example:
ssp0: ssp_port@0 {
reg = <0>;
- status = "okay";
};
ssp1: ssp_port@1 {
reg = <1>;
- status = "disabled";
};
ssp2: ssp_port@2 {
reg = <2>;
- status = "disabled";
};
spdif: spdif_port@3 {
reg = <3>;
- status = "disabled";
};
};
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
index e0b6165c9cfcec19051bf7f8e1c5873374f83a69..3ffc2562fb31a24165ed4ae374ef011b43317007 100644
--- a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
@@ -47,5 +47,4 @@ mcbsp0: mcbsp@1d10000 {
dmas = <&edma0 3 1
&edma0 2 1>;
dma-names = "tx", "rx";
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
index 3e26a9478e570279eeaf461a7ed675c6f3f013ed..65979b205893c791de5332fb84a23543720ee0b5 100644
--- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
@@ -61,5 +61,4 @@ asrc: asrc@02034000 {
"txa", "txb", "txc";
fsl,asrc-rate = <48000>;
fsl,asrc-width = <16>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
index cd3ee5d84f030f67df79de05b9561e1937dc6ce0..21c401e2ccda6e66bc2ef110b64d701a519b5d40 100644
--- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -59,5 +59,4 @@ esai: esai@02024000 {
fsl,fifo-depth = <128>;
fsl,esai-synchronous;
big-endian;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
index 4ca39ddc04172bcc4a56e41a193b7ea405ad82a7..0f97e54c3d436965eaff1e31e92db569170cb02f 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -59,5 +59,4 @@ spdif: spdif@02004000 {
"rxtx7";
big-endian;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/sound/hdmi.txt b/Documentation/devicetree/bindings/sound/hdmi.txt
index 31af7bca309979e1b26ce817700a4dab64d93afd..56407c30e954d507423500900908b1f0b9764f23 100644
--- a/Documentation/devicetree/bindings/sound/hdmi.txt
+++ b/Documentation/devicetree/bindings/sound/hdmi.txt
@@ -13,5 +13,4 @@ Example node:
hdmi_audio: hdmi_audio@0 {
compatible = "linux,hdmi-audio";
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index a1536fdc60e62c4921ef01869c1da9fe4b31d69c..085bec364caf6592539535d13a6e50a05515c888 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -621,7 +621,6 @@ Example: simple sound card
/* Single DAI */
#sound-dai-cells = <0>;
- status = "okay";
rcar_sound,dai {
dai0 {
@@ -667,7 +666,6 @@ Example: simple sound card for Multi channel
/* Single DAI */
#sound-dai-cells = <0>;
- status = "okay";
rcar_sound,dai {
dai0 {
diff --git a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt
index 2ad66f649a28fabed59c28e518a3b68f6d7c2973..47f164fbd1d72f80f8caedb7e6d62ad991351897 100644
--- a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt
@@ -38,5 +38,4 @@ pdm: pdm@ff040000 {
&pdmm0_sdi1_sleep
&pdmm0_sdi2_sleep
&pdmm0_sdi3_sleep>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt
index 4706b96d450bf502991ef58f6793b73f036617b4..0a1dc4e1815cb524faee4c228a14ddeeea626578 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt
@@ -41,6 +41,5 @@ spdif: spdif@0x1011e000 {
dma-names = "tx";
clock-names = "hclk", "mclk";
clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
- status = "disabled";
#sound-dai-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
index 745dc62f76ea320c5c192d3e9e6c40ef9743abda..40068ec0e9a561db3128fe37d581b1a4499b5ddf 100644
--- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
@@ -53,7 +53,6 @@ Example:
sti_uni_player1: sti-uni-player@0x8D81000 {
compatible = "st,stih407-uni-player-hdmi";
- status = "okay";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
@@ -66,7 +65,6 @@ Example:
sti_uni_player2: sti-uni-player@0x8D82000 {
compatible = "st,stih407-uni-player-pcm-out";
- status = "okay";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
@@ -78,7 +76,6 @@ Example:
sti_uni_player3: sti-uni-player@0x8D85000 {
compatible = "st,stih407-uni-player-spdif";
- status = "okay";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
@@ -90,7 +87,6 @@ Example:
sti_uni_reader1: sti-uni-reader@0x8D84000 {
compatible = "st,stih407-uni-reader-hdmi";
- status = "disabled";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
reg = <0x8D84000 0x158>;
@@ -125,7 +121,6 @@ Example of audio card declaration:
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "sti audio card";
- status = "okay";
simple-audio-card,dai-link@0 {
/* DAC */
diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index fe0a65e6d629d407e6413054a8f7ac8e5dd6f026..70ee177901d3044ee1c4434f41c892d5db60ff9b 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -39,5 +39,4 @@ spdif: spdif@01c21000 {
clock-names = "apb", "spdif";
dmas = <&dma 0 2>, <&dma 0 2>;
dma-names = "rx", "tx";
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt
index 806ea7381483b259748806a5cc275536d60cb9bd..40d94f82beb364c1056e75d9f8e089368f63951a 100644
--- a/Documentation/devicetree/bindings/sound/tas5720.txt
+++ b/Documentation/devicetree/bindings/sound/tas5720.txt
@@ -17,7 +17,6 @@ Required properties:
Example:
tas5720: tas5720@6c {
- status = "okay";
compatible = "ti,tas5720";
reg = <0x6c>;
dvdd-supply = <&vdd_3v3_reg>;
diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
index 292ad5083704b18cc7a982bf27430e52752f2553..3927251464f0619da76a6c43f2f24e978cf97d06 100644
--- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
@@ -27,7 +27,6 @@ Example:
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 5>, <&dma 6>;
dma-names = "tx", "rx";
- status = "okay";
};
sound {
diff --git a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt
index 989544ea6eb5d80aa58e8bcc318f4b9236aa1be9..b5a5ca4502f9d4251414a978a1119e496929d99a 100644
--- a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt
@@ -24,5 +24,4 @@ Example:
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 4>;
dma-names = "tx";
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt
index 750e29aff9bc529ba721a3c842fd85ec37e1e132..2c1e6a43930baa88426aa4822f6ec79ee8bbc10e 100644
--- a/Documentation/devicetree/bindings/spi/efm32-spi.txt
+++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt
@@ -28,7 +28,6 @@ spi1: spi@0x4000c400 { /* USART1 */
clocks = <&cmu 20>;
cs-gpios = <&gpio 51 1>; // D3
energymicro,location = <1>;
- status = "ok";
ks8851@0 {
compatible = "ks8851";
@@ -36,6 +35,5 @@ spi1: spi@0x4000c400 { /* USART1 */
reg = <0>;
interrupt-parent = <&boardfpga>;
interrupts = <4>;
- status = "ok";
};
};
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
index b785976fe98aff57a91f3c8f2d08a62dd2a606de..9ba7c5a273b4f39cfb912ff9df50e41d317f4677 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
@@ -38,5 +38,4 @@ spi@7000d600 {
reset-names = "spi";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
index bdf08e6dec9bdf325fe9a992c2dfd611dbd46a92..c212491929b5b84832d7ddc06db6c1a9113fae69 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
@@ -34,5 +34,4 @@ spi@7000c380 {
reset-names = "spi";
dmas = <&apbdma 11>, <&apbdma 11>;
dma-names = "rx", "tx";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
index 5db9144a33c8beee16993c5f79100b59e8de669b..40d80b93e32799ee0a3cb14a206ec3232f1973f3 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
@@ -34,5 +34,4 @@ spi@7000d600 {
reset-names = "spi";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt
index 319bad4af875862c9d1e862403500206817ce743..585fed90376ecc1ca243f57aedde6aa78af04f94 100644
--- a/Documentation/devicetree/bindings/spi/sh-hspi.txt
+++ b/Documentation/devicetree/bindings/spi/sh-hspi.txt
@@ -24,6 +24,5 @@ Example:
interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index 39e5ef7c5e71694eeb6d1ccba4499d0cdd8b125e..e865855726a2b973a201ab1c3babc4df70451007 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -79,5 +79,4 @@ Example:
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/spi/spi-clps711x.txt b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
index 4c3ec13f423fdbd9b2a12fb328d9c8b15b2ecaae..5122dc7860af595a0e9393a22c320aef4b0c4be7 100644
--- a/Documentation/devicetree/bindings/spi/spi-clps711x.txt
+++ b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
@@ -23,7 +23,6 @@ spi@80000500 {
reg = <0x80000500 0x4>;
interrupts = <15>;
clocks = <&clks CLPS711X_CLK_SPI>;
- status = "disabled";
};
syscon3: syscon@80002200 {
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index ff5893d275a2132e63f5f824f9a074d18e904865..13b1fcc8469e699412282d92c59c59328916dff8 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -39,7 +39,6 @@ dspi0@4002c000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dspi0_1>;
big-endian;
- status = "okay";
sflash: at26df081a@0 {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
index e0318cf92d731c377a9be9dfc950dea4852f3a5e..236dcb0faf376238d9fe4452c5bcb5f686b87e37 100644
--- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
@@ -57,5 +57,4 @@ spi: spi@1100a000 {
clock-names = "parent-clk", "sel-clk", "spi-clk";
cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
mediatek,pad-select = <1>, <0>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt
index 4f629cc7634a910757bc41d3d21740d6fe163909..df8ec31f2f076ae4dafe29950797bd5f2fe68526 100644
--- a/Documentation/devicetree/bindings/spi/spi-orion.txt
+++ b/Documentation/devicetree/bindings/spi/spi-orion.txt
@@ -29,7 +29,6 @@ Example:
cell-index = <0>;
reg = <0x10600 0x28>;
interrupts = <23>;
- status = "disabled";
};
Example with SPI direct mode support (optionally):
@@ -48,7 +47,6 @@ Example with SPI direct mode support (optionally):
<MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
<MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
interrupts = <23>;
- status = "disabled";
};
To enable the direct mode, the board specific 'ranges' property in the
diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
index de827f5a301e49133df378e55e685f3d44eec9f9..484bbff5337e17a9d5976b3984734619e0f75296 100644
--- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
@@ -18,7 +18,6 @@ spi1: spi@01c06000 {
interrupts = <11>;
clocks = <&ahb_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
- status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
index 2ec99b86b62297ab9793e143e137982ca6b3c11d..ab1811354cce2ef8b1436d40cf7362423e9b2c7f 100644
--- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
@@ -39,7 +39,6 @@ spi0: spi@01c68000 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
resets = <&ccu RST_BUS_SPI0>;
- status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
index fb588b3e6a9a3de0bbe9223beef95372a18c7567..f99c733d75c12b6d393eb8b48f66c2cbdeaba56b 100644
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -26,7 +26,6 @@ spi1: spi@fffcc000 {
clock-names = "spi_clk";
cs-gpios = <&pioB 3 0>;
atmel,fifo-size = <32>;
- status = "okay";
mmc-slot@0 {
compatible = "mmc-spi-slot";
diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
index 8d5665468fe7e6919d3bf4f3e646e0ae571eeb5d..170034e6c8b0e3927f5a4d8b41b3b8cc1ba8ec36 100644
--- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt
+++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
@@ -59,7 +59,6 @@ sram-controller@01c00000 {
emac_sram: sram-section@8000 {
compatible = "allwinner,sun4i-a10-sram-a3-a4";
reg = <0x8000 0x4000>;
- status = "disabled";
};
};
};
diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
index 4698e0edc205d92491ecbd00b56c1281db7ae05b..24aacf8948c51626a22d844ddd95f752da4206f3 100644
--- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
@@ -20,5 +20,4 @@ Example:
compatible = "marvell,armada370-thermal";
reg = <0xd0018300 0x4
0xd0018304 0x4>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index 70b4c16c7ed8374098557aee923375e0e94714c1..9b4c7b017495bbf056f8d787b0726110789af5e6 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -77,7 +77,6 @@ Example 1):
interrupts = <2 4>;
clocks = <&clock 383>;
clock-names = "tmu_apbif";
- status = "disabled";
vtmu-supply = <&tmu_regulator_node>;
#include "exynos4412-tmu-sensor-conf.dtsi"
};
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
index 07a9713ae6a75757f43139a9a4b75c22c95f7304..fdf5caa6229b4fffe95853e061e9c62c83307364 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
@@ -36,7 +36,6 @@ Example:
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#thermal-sensor-cells = <1>;
- status = "okay";
};
thermal-zones {
diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt
index 35f406dd86b6c191a9dd21cf7e1c3b5091d01dd4..af284fbd4d238e4ce5b77e5d55c989c99366c8b0 100644
--- a/Documentation/devicetree/bindings/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/trivial-devices.txt
@@ -21,6 +21,16 @@ adi,adt7490 +/-1C TDM Extended Temp Range I.C
adi,adxl345 Three-Axis Digital Accelerometer
adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
ams,iaq-core AMS iAQ-Core VOC Sensor
+amstaos,tsl2571 AMS/TAOS ALS and proximity sensor
+amstaos,tsl2671 AMS/TAOS ALS and proximity sensor
+amstaos,tmd2671 AMS/TAOS ALS and proximity sensor
+amstaos,tsl2771 AMS/TAOS ALS and proximity sensor
+amstaos,tmd2771 AMS/TAOS ALS and proximity sensor
+amstaos,tsl2572 AMS/TAOS ALS and proximity sensor
+amstaos,tsl2672 AMS/TAOS ALS and proximity sensor
+amstaos,tmd2672 AMS/TAOS ALS and proximity sensor
+amstaos,tsl2772 AMS/TAOS ALS and proximity sensor
+amstaos,tmd2772 AMS/TAOS ALS and proximity sensor
at,24c08 i2c serial eeprom (24cxx)
atmel,at97sc3204t i2c trusted platform module (TPM)
capella,cm32181 CM32181: Ambient Light Sensor
@@ -36,7 +46,9 @@ dallas,ds1775 Tiny Digital Thermometer and Thermostat
dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM
dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O
dallas,ds75 Digital Thermometer and Thermostat
+devantech,srf02 Devantech SRF02 ultrasonic ranger in I2C mode
devantech,srf08 Devantech SRF08 ultrasonic ranger
+devantech,srf10 Devantech SRF10 ultrasonic ranger
dlg,da9053 DA9053: flexible system level PMIC with multicore support
dlg,da9063 DA9063: system PMIC for quad-core application processors
domintech,dmard09 DMARD09: 3-axis Accelerometer
@@ -54,6 +66,7 @@ fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec
gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz)
+isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM
isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor
isil,isl29030 Intersil ISL29030 Ambient Light and Proximity Sensor
maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator
@@ -168,6 +181,7 @@ st,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface
ti,ads7828 8-Channels, 12-bit ADC
ti,ads7830 8-Channels, 8-bit ADC
+ti,amc6821 Temperature Monitoring and Fan Control
ti,tsc2003 I2C Touch-Screen Controller
ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
diff --git a/Documentation/devicetree/bindings/unittest.txt b/Documentation/devicetree/bindings/unittest.txt
index 3bf58c20fe94da71ecae272e7d86256bd42f0683..9a5b311f44342079d73ab7b5a4881d2d8c706c59 100644
--- a/Documentation/devicetree/bindings/unittest.txt
+++ b/Documentation/devicetree/bindings/unittest.txt
@@ -10,7 +10,6 @@ All other properties are optional.
Example:
unittest {
compatible = "unittest";
- status = "okay";
};
2) OF unittest i2c adapter platform device
@@ -25,7 +24,6 @@ Children nodes contain unittest i2c devices.
Example:
unittest-i2c-bus {
compatible = "unittest-i2c-bus";
- status = "okay";
};
3) OF unittest i2c device
@@ -40,7 +38,6 @@ All other properties are optional
Example:
unittest-i2c-dev {
compatible = "unittest-i2c-dev";
- status = "okay";
};
4) OF unittest i2c mux device
@@ -55,7 +52,6 @@ Children nodes contain unittest i2c bus nodes per channel.
Example:
unittest-i2c-mux {
compatible = "unittest-i2c-mux";
- status = "okay";
#address-cells = <1>;
#size-cells = <0>;
channel-0 {
@@ -65,7 +61,6 @@ Example:
i2c-dev {
reg = <8>;
compatible = "unittest-i2c-dev";
- status = "okay";
};
};
};
diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
index d9b42da016f3a209d76444ca764ec6d22ed08b7d..cb2bd83fa89aa9db0a9a8fac774fe8f8656f2efb 100644
--- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
+++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
@@ -25,5 +25,4 @@ Example:
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
index 20c2ff2ba07ebd3f8e7d4e2b438b69373cacfbba..16920d78e1b8b9d350189434a46d19037aca19e5 100644
--- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -4,9 +4,9 @@
- reg: offset and length of the usbss register sets
- ti,hwmods : must be "usb_otg_hs"
-The glue layer contains multiple child nodes. It is required the have
+The glue layer contains multiple child nodes. It is required to have
at least a control module node, USB node and a PHY node. The second USB
-node and its PHY node is optional. The DMA node is also optional.
+node and its PHY node are optional. The DMA node is also optional.
Reset module
~~~~~~~~~~~~
diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
index 717c5f6562373decc6eb91e7963d445b59739f59..9ce22551b2b3ea2aa7dff3d0819093114dc421a3 100644
--- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -42,7 +42,6 @@ Example:
usb_phy: usb-phy {
compatible = "ti,da830-usb-phy";
#phy-cells = <0>;
- status = "okay";
};
usb0: usb@200000 {
compatible = "ti,da830-musb";
@@ -66,7 +65,6 @@ Example:
"rx1", "rx2", "rx3", "rx4",
"tx1", "tx2", "tx3", "tx4";
- status = "okay";
cppi41dma: dma-controller@201000 {
compatible = "ti,da830-cppi41";
diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt
index 50dee3b44665e6495dff51ea4e1c9fd45cbcb7ac..df0e02e1ee43e7b8bf88486d26bea2ed92d8aeef 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-st.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -42,7 +42,6 @@ or "device".
Example:
st_dwc3: dwc3@8f94000 {
- status = "disabled";
compatible = "st,stih407-dwc3";
reg = <0x08f94000 0x1000>, <0x110 0x4>;
reg-names = "reg-glue", "syscfg-reg";
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
index 30361b32a46024ef118a9fe5858eb1eb29288bf6..4aae5b2cef56e65d1d20f0a5a0960f19488a2001 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
@@ -18,7 +18,6 @@ Example device node:
usb@0 {
#address-cells = <0x2>;
#size-cells = <0x1>;
- status = "okay";
compatible = "xlnx,zynqmp-dwc3";
clock-names = "bus_clk" "ref_clk";
clocks = <&clk125>, <&clk125>;
diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt
index 410d922cfdd713b59eacb8ff0f39950314a55334..9feea6c3e4d998cba087de49f608cba8ce445242 100644
--- a/Documentation/devicetree/bindings/usb/ehci-st.txt
+++ b/Documentation/devicetree/bindings/usb/ehci-st.txt
@@ -31,7 +31,6 @@ Example:
clocks = <&clk_s_a1_ls 0>;
phys = <&usb2_phy>;
phy-names = "usb";
- status = "okay";
resets = <&powerdown STIH416_USB1_POWERDOWN>,
<&softreset STIH416_USB1_SOFTRESET>;
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
index 78ebebb66dada6f088fdf003871542f9c9f71254..c97374315049ae874fd5c9aaa764bb254ca780d2 100644
--- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -40,7 +40,6 @@ Example:
port@0 {
reg = <0>;
phys = <&usb2phy 1>;
- status = "disabled";
};
};
@@ -75,7 +74,6 @@ Example:
port@0 {
reg = <0>;
phys = <&usb2phy 1>;
- status = "disabled";
};
};
diff --git a/Documentation/devicetree/bindings/usb/isp1301.txt b/Documentation/devicetree/bindings/usb/isp1301.txt
index 5405d99d9aaa92fe752abc9ae2a9b89b080df8fc..ecd607dacba553eb664d10681bac8baae47002ab 100644
--- a/Documentation/devicetree/bindings/usb/isp1301.txt
+++ b/Documentation/devicetree/bindings/usb/isp1301.txt
@@ -21,5 +21,4 @@ Example:
interrupt-parent = <&mic>;
interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
transceiver = <&isp1301>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
index 2d1bef16f1492a9c7699e84dd306b2694ff6aafe..f96e09f784cc0c721dea4cb44dfa68debe27afb1 100644
--- a/Documentation/devicetree/bindings/usb/keystone-usb.txt
+++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
@@ -44,7 +44,6 @@ Example:
clock-names = "usb";
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
ranges;
- status = "disabled";
dwc3@2690000 {
compatible = "synopsys,dwc3";
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index 838ae48eafc159fe28f9cf4cc589a4db979f9881..49f54767cd214e8d6d4ada2dcd1e133aa6ede4cc 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -75,7 +75,6 @@ ssusb: usb@11271000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
- status = "disabled";
usb_host: xhci@11270000 {
compatible = "mediatek,mt8173-xhci";
@@ -86,6 +85,5 @@ ssusb: usb@11271000 {
clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
clock-names = "sys_ck", "ref_ck";
vusb33-supply = <&mt6397_vusb_reg>;
- status = "disabled";
};
};
diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt
index 6d8393748da28a0518a42eef1cd5409fa1c1ac0b..d893ec9131c3bdec4cd71e632b932ffd56dfbc9f 100644
--- a/Documentation/devicetree/bindings/usb/ohci-st.txt
+++ b/Documentation/devicetree/bindings/usb/ohci-st.txt
@@ -29,7 +29,6 @@ Example:
clock-names = "ic", "clk48";
phys = <&usb2_phy>;
phy-names = "usb";
- status = "okay";
resets = <&powerdown STIH416_USB0_POWERDOWN>,
<&softreset STIH416_USB0_SOFTRESET>;
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
index 73cc0963e823dc2d78f3ec23a4931dcaf1cb0785..bc8a2fa5d2bfddaca308c7d9d6f9bcae7eb98b0f 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -29,7 +29,6 @@ Example device nodes:
clock-names = "ref";
#phy-cells = <0>;
- status = "ok";
};
ss_phy: phy@100f8830 {
@@ -39,7 +38,6 @@ Example device nodes:
clock-names = "ref";
#phy-cells = <0>;
- status = "ok";
};
usb3_0: usb30@0 {
@@ -51,7 +49,6 @@ Example device nodes:
ranges;
- status = "ok";
dwc3@10000000 {
compatible = "snps,dwc3";
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
index 0536a938e3abe084fb83ab98d584dfeeee10e888..50a31536e975ef915defb7fd35db914f3b0d6cf6 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -29,13 +29,11 @@ Example device nodes:
#address-cells = <2>;
#size-cells = <2>;
ranges;
- status = "disabled";
usbdrd_dwc3_0: dwc3@fe800000 {
compatible = "snps,dwc3";
reg = <0x0 0xfe800000 0x0 0x100000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "otg";
- status = "disabled";
};
};
@@ -48,12 +46,10 @@ Example device nodes:
#address-cells = <2>;
#size-cells = <2>;
ranges;
- status = "disabled";
usbdrd_dwc3_1: dwc3@fe900000 {
compatible = "snps,dwc3";
reg = <0x0 0xfe900000 0x0 0x100000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "otg";
- status = "disabled";
};
};
diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
index 1c35e7b665e1f8e9eb64dc6495f029a3d7c3ff64..ce02cebac26afdc80d99600725b3aaec24cb01e9 100644
--- a/Documentation/devicetree/bindings/usb/usb-device.txt
+++ b/Documentation/devicetree/bindings/usb/usb-device.txt
@@ -2,7 +2,7 @@ Generic USB Device Properties
Usually, we only use device tree for hard wired USB device.
The reference binding doc is from:
-http://www.firmware.org/1275/bindings/usb/usb-1_0.ps
+http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
Required properties:
- compatible: usbVID,PID. The textual representation of VID, PID shall
@@ -16,7 +16,6 @@ Required properties:
Example:
&usb1 {
- status = "okay";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index f58c9323b92bba75eb528dcfae552c16c6aadcbd..401ed98cab1829f867b9be45af898e0f385308bc 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -9,6 +9,7 @@ actions Actions Semiconductor Co., Ltd.
active-semi Active-Semi International Inc
ad Avionic Design GmbH
adapteva Adapteva, Inc.
+adaptrum Adaptrum, Inc.
adh AD Holdings Plc.
adi Analog Devices, Inc.
advantech Advantech Corporation
@@ -197,6 +198,7 @@ mediatek MediaTek Inc.
megachips MegaChips
melexis Melexis N.V.
melfas MELFAS Inc.
+mellanox Mellanox Technologies
memsic MEMSIC Inc.
merrii Merrii Technology Co., Ltd.
micrel Micrel Inc.
@@ -208,7 +210,7 @@ miramems MiraMEMS Sensing Technology Co., Ltd.
mitsubishi Mitsubishi Electric Corporation
mosaixtech Mosaix Technologies, Inc.
motorola Motorola, Inc.
-moxa Moxa
+moxa Moxa Inc.
mpl MPL AG
mqmaker mqmaker Inc.
msi Micro-Star International Co. Ltd.
@@ -344,6 +346,7 @@ tpo TPO
tronfy Tronfy
tronsmart Tronsmart
truly Truly Semiconductors Limited
+tsd Theobroma Systems Design und Consulting GmbH
tyan Tyan Computer Corporation
ucrobotics uCRobotics
udoo Udoo
diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt b/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt
index ecf42c07684d15e5374466a5c30e3aaad4f12dc2..cbaa6467ab2cc3f0892d0958cc87fb25739837da 100644
--- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt
+++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt
@@ -15,5 +15,4 @@ owire: owire@63fa4000 {
compatible = "fsl,imx53-owire", "fsl,imx21-owire";
reg = <0x63fa4000 0x4000>;
clocks = <&clks 159>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
index f7cc7c0609107d6f94de076af38f84590f175896..4fec1e3725b44c1d3e9731a9040e884abe1df5c2 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
@@ -31,5 +31,4 @@ Example:
atmel,watchdog-type = "hardware";
atmel,dbg-halt;
atmel,idle-halt;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
index 86fa6de1019bdbfba3675efd6b4b02244c783809..711a880b3d3bf46ed5b5e67dc98ceed3f10d80b0 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -48,5 +48,4 @@ Example:
atmel,idle-halt;
atmel,max-heartbeat-sec = <16>;
atmel,min-heartbeat-sec = <0>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
index 858ed9221ac4d65d77ddc8537c2761995527af52..c1b67a78f00c770109bdf0b80059e401413b80ef 100644
--- a/Documentation/devicetree/bindings/watchdog/marvel.txt
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -41,6 +41,5 @@ Example:
reg = <0x20300 0x28>, <0x20108 0x4>;
interrupts = <3>;
timeout-sec = <10>;
- status = "okay";
clocks = <&gate_clk 7>;
};
diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
index fb740445199fabc1227d6d3e6512c7e24f9f4e41..417f9111001042bcf5348decba7dc933016257b2 100644
--- a/Documentation/devicetree/booting-without-of.txt
+++ b/Documentation/devicetree/booting-without-of.txt
@@ -1282,7 +1282,7 @@ hierarchy and routing of interrupts in the hardware.
The interrupt tree model is fully described in the
document "Open Firmware Recommended Practice: Interrupt
Mapping Version 0.9". The document is available at:
-<http://www.openfirmware.org/ofwg/practice/>
+<http://www.devicetree.org/open-firmware/practice/>
1) interrupts property
----------------------
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index ea2d83f1f4bb3a7bb7af9247488f8f7679aa918c..7de941cbbd940fb7ca72840e3bf6422993c6eb94 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -293,7 +293,7 @@ static int __init xilinx_timer_init(struct device_node *timer)
return -EINVAL;
}
- pr_info("%s: irq=%d\n", timer->full_name, irq);
+ pr_info("%pOF: irq=%d\n", timer, irq);
clk = of_clk_get(timer, 0);
if (IS_ERR(clk)) {
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 404fb38d06b7627525998909ebfeac5653996401..180f4755ca66a64a703cd8a3f7f1457f812faa5b 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -508,8 +508,8 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
struct of_pci_range range;
struct of_pci_range_parser parser;
- pr_info("PCI host bridge %s %s ranges:\n",
- dev->full_name, primary ? "(primary)" : "");
+ pr_info("PCI host bridge %pOF %s ranges:\n",
+ dev, primary ? "(primary)" : "");
/* Check for ranges property */
if (of_pci_range_parser_init(&parser, dev))
@@ -1219,8 +1219,8 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
if (!res->flags) {
pr_warn("PCI: I/O resource not set for host ");
- pr_cont("bridge %s (domain %d)\n",
- hose->dn->full_name, hose->global_number);
+ pr_cont("bridge %pOF (domain %d)\n",
+ hose->dn, hose->global_number);
/* Workaround for lack of IO resource only on 32-bit */
res->start = (unsigned long)hose->io_base_virt - isa_io_base;
res->end = res->start + IO_SPACE_LIMIT;
@@ -1241,8 +1241,8 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
if (i > 0)
continue;
pr_err("PCI: Memory resource 0 not set for ");
- pr_cont("host bridge %s (domain %d)\n",
- hose->dn->full_name, hose->global_number);
+ pr_cont("host bridge %pOF (domain %d)\n",
+ hose->dn, hose->global_number);
/* Workaround for lack of MEM resource only on 32-bit */
res->start = hose->pci_mem_offset;
@@ -1270,7 +1270,7 @@ static void pcibios_scan_phb(struct pci_controller *hose)
struct pci_bus *bus;
struct device_node *node = hose->dn;
- pr_debug("PCI: Scanning PHB %s\n", of_node_full_name(node));
+ pr_debug("PCI: Scanning PHB %pOF\n", node);
pcibios_setup_phb_resources(hose, &resources);
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 580bbf6ca2b112707b7f2ed00fdda0bf0506d782..792722e7d45884add844d9931ddef7dc5e816f0f 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -274,10 +274,9 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
/* Now consume following elements while they are contiguous */
while (parser->range + parser->np <= parser->end) {
- u32 flags, pci_space;
+ u32 flags;
u64 pci_addr, cpu_addr, size;
- pci_space = be32_to_cpup(parser->range);
flags = of_bus_pci_get_flags(parser->range);
pci_addr = of_read_number(parser->range + 1, ns);
cpu_addr = of_translate_address(parser->node,
@@ -559,7 +558,7 @@ static u64 __of_translate_address(struct device_node *dev,
int na, ns, pna, pns;
u64 result = OF_BAD_ADDR;
- pr_debug("** translation for device %s **\n", of_node_full_name(dev));
+ pr_debug("** translation for device %pOF **\n", dev);
/* Increase refcount at current level */
of_node_get(dev);
@@ -573,13 +572,13 @@ static u64 __of_translate_address(struct device_node *dev,
/* Count address cells & copy address locally */
bus->count_cells(dev, &na, &ns);
if (!OF_CHECK_COUNTS(na, ns)) {
- pr_debug("Bad cell count for %s\n", of_node_full_name(dev));
+ pr_debug("Bad cell count for %pOF\n", dev);
goto bail;
}
memcpy(addr, in_addr, na * 4);
- pr_debug("bus is %s (na=%d, ns=%d) on %s\n",
- bus->name, na, ns, of_node_full_name(parent));
+ pr_debug("bus is %s (na=%d, ns=%d) on %pOF\n",
+ bus->name, na, ns, parent);
of_dump_addr("translating address:", addr, na);
/* Translate */
@@ -600,13 +599,12 @@ static u64 __of_translate_address(struct device_node *dev,
pbus = of_match_bus(parent);
pbus->count_cells(dev, &pna, &pns);
if (!OF_CHECK_COUNTS(pna, pns)) {
- pr_err("Bad cell count for %s\n",
- of_node_full_name(dev));
+ pr_err("Bad cell count for %pOF\n", dev);
break;
}
- pr_debug("parent bus is %s (na=%d, ns=%d) on %s\n",
- pbus->name, pna, pns, of_node_full_name(parent));
+ pr_debug("parent bus is %s (na=%d, ns=%d) on %pOF\n",
+ pbus->name, pna, pns, parent);
/* Apply bus translation */
if (of_translate_one(dev, bus, pbus, addr, na, ns, pna, rprop))
@@ -855,7 +853,7 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
}
if (!ranges) {
- pr_debug("no dma-ranges found for node(%s)\n", np->full_name);
+ pr_debug("no dma-ranges found for node(%pOF)\n", np);
ret = -ENODEV;
goto out;
}
@@ -872,8 +870,8 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
dmaaddr = of_read_number(ranges, naddr);
*paddr = of_translate_dma_address(np, ranges);
if (*paddr == OF_BAD_ADDR) {
- pr_err("translation of DMA address(%pad) to CPU address failed node(%s)\n",
- dma_addr, np->full_name);
+ pr_err("translation of DMA address(%pad) to CPU address failed node(%pOF)\n",
+ dma_addr, np);
ret = -EINVAL;
goto out;
}
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 686628d1dfa67813f1dbe197704a4b0761ba6bae..260d33c0f26c9b290ec2c7f2d03237ebbad7da02 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -60,14 +60,13 @@ DEFINE_RAW_SPINLOCK(devtree_lock);
int of_n_addr_cells(struct device_node *np)
{
- const __be32 *ip;
+ u32 cells;
do {
if (np->parent)
np = np->parent;
- ip = of_get_property(np, "#address-cells", NULL);
- if (ip)
- return be32_to_cpup(ip);
+ if (!of_property_read_u32(np, "#address-cells", &cells))
+ return cells;
} while (np->parent);
/* No #address-cells property for the root node */
return OF_ROOT_NODE_ADDR_CELLS_DEFAULT;
@@ -76,14 +75,13 @@ EXPORT_SYMBOL(of_n_addr_cells);
int of_n_size_cells(struct device_node *np)
{
- const __be32 *ip;
+ u32 cells;
do {
if (np->parent)
np = np->parent;
- ip = of_get_property(np, "#size-cells", NULL);
- if (ip)
- return be32_to_cpup(ip);
+ if (!of_property_read_u32(np, "#size-cells", &cells))
+ return cells;
} while (np->parent);
/* No #size-cells property for the root node */
return OF_ROOT_NODE_SIZE_CELLS_DEFAULT;
@@ -160,7 +158,7 @@ int __of_add_property_sysfs(struct device_node *np, struct property *pp)
pp->attr.read = of_node_property_read;
rc = sysfs_create_bin_file(&np->kobj, &pp->attr);
- WARN(rc, "error adding attribute %s to node %s\n", pp->name, np->full_name);
+ WARN(rc, "error adding attribute %s to node %pOF\n", pp->name, np);
return rc;
}
@@ -1122,7 +1120,7 @@ EXPORT_SYMBOL(of_find_node_by_phandle);
void of_print_phandle_args(const char *msg, const struct of_phandle_args *args)
{
int i;
- printk("%s %s", msg, of_node_full_name(args->np));
+ printk("%s %pOF", msg, args->np);
for (i = 0; i < args->args_count; i++) {
const char delim = i ? ',' : ':';
@@ -1184,17 +1182,17 @@ int of_phandle_iterator_next(struct of_phandle_iterator *it)
if (it->cells_name) {
if (!it->node) {
- pr_err("%s: could not find phandle\n",
- it->parent->full_name);
+ pr_err("%pOF: could not find phandle\n",
+ it->parent);
goto err;
}
if (of_property_read_u32(it->node, it->cells_name,
&count)) {
- pr_err("%s: could not get %s for %s\n",
- it->parent->full_name,
+ pr_err("%pOF: could not get %s for %pOF\n",
+ it->parent,
it->cells_name,
- it->node->full_name);
+ it->node);
goto err;
}
} else {
@@ -1206,8 +1204,8 @@ int of_phandle_iterator_next(struct of_phandle_iterator *it)
* property data length
*/
if (it->cur + count > it->list_end) {
- pr_err("%s: arguments longer than property\n",
- it->parent->full_name);
+ pr_err("%pOF: arguments longer than property\n",
+ it->parent);
goto err;
}
}
@@ -1639,8 +1637,8 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
strncpy(ap->stem, stem, stem_len);
ap->stem[stem_len] = 0;
list_add_tail(&ap->link, &aliases_lookup);
- pr_debug("adding DT alias:%s: stem=%s id=%i node=%s\n",
- ap->alias, ap->stem, ap->id, of_node_full_name(np));
+ pr_debug("adding DT alias:%s: stem=%s id=%i node=%pOF\n",
+ ap->alias, ap->stem, ap->id, np);
}
/**
@@ -1664,11 +1662,13 @@ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align))
if (of_chosen) {
/* linux,stdout-path and /aliases/stdout are for legacy compatibility */
- const char *name = of_get_property(of_chosen, "stdout-path", NULL);
- if (!name)
- name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+ const char *name = NULL;
+
+ if (of_property_read_string(of_chosen, "stdout-path", &name))
+ of_property_read_string(of_chosen, "linux,stdout-path",
+ &name);
if (IS_ENABLED(CONFIG_PPC) && !name)
- name = of_get_property(of_aliases, "stdout", NULL);
+ of_property_read_string(of_aliases, "stdout", &name);
if (name)
of_stdout = of_find_node_opts_by_path(name, &of_stdout_options);
}
diff --git a/drivers/of/device.c b/drivers/of/device.c
index e0a28ea341fe95e84a866559dad8e317c8056401..17b66e9715d2d6fed228205702d552197ad98296 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -58,7 +58,7 @@ int of_device_add(struct platform_device *ofdev)
/* name and id have to be set so that the platform bus doesn't get
* confused on matching */
ofdev->name = dev_name(&ofdev->dev);
- ofdev->id = -1;
+ ofdev->id = PLATFORM_DEVID_NONE;
/*
* If this device has not binding numa node in devicetree, that is
@@ -196,8 +196,10 @@ EXPORT_SYMBOL(of_device_get_match_data);
static ssize_t of_device_get_modalias(struct device *dev, char *str, ssize_t len)
{
const char *compat;
- int cplen, i;
- ssize_t tsize, csize, repend;
+ char *c;
+ struct property *p;
+ ssize_t csize;
+ ssize_t tsize;
if ((!dev) || (!dev->of_node))
return -ENODEV;
@@ -205,42 +207,28 @@ static ssize_t of_device_get_modalias(struct device *dev, char *str, ssize_t len
/* Name & Type */
csize = snprintf(str, len, "of:N%sT%s", dev->of_node->name,
dev->of_node->type);
-
- /* Get compatible property if any */
- compat = of_get_property(dev->of_node, "compatible", &cplen);
- if (!compat)
- return csize;
-
- /* Find true end (we tolerate multiple \0 at the end */
- for (i = (cplen - 1); i >= 0 && !compat[i]; i--)
- cplen--;
- if (!cplen)
- return csize;
- cplen++;
-
- /* Check space (need cplen+1 chars including final \0) */
- tsize = csize + cplen;
- repend = tsize;
-
- if (csize >= len) /* @ the limit, all is already filled */
- return tsize;
-
- if (tsize >= len) { /* limit compat list */
- cplen = len - csize - 1;
- repend = len;
- }
-
- /* Copy and do char replacement */
- memcpy(&str[csize + 1], compat, cplen);
- for (i = csize; i < repend; i++) {
- char c = str[i];
- if (c == '\0')
- str[i] = 'C';
- else if (c == ' ')
- str[i] = '_';
+ tsize = csize;
+ len -= csize;
+ if (str)
+ str += csize;
+
+ of_property_for_each_string(dev->of_node, "compatible", p, compat) {
+ csize = strlen(compat) + 1;
+ tsize += csize;
+ if (csize > len)
+ continue;
+
+ csize = snprintf(str, len, "C%s", compat);
+ for (c = str; c; ) {
+ c = strchr(c, ' ');
+ if (c)
+ *c++ = '_';
+ }
+ len -= csize;
+ str += csize;
}
- return repend;
+ return tsize;
}
int of_device_request_module(struct device *dev)
@@ -274,6 +262,8 @@ ssize_t of_device_modalias(struct device *dev, char *str, ssize_t len)
ssize_t sl = of_device_get_modalias(dev, str, len - 2);
if (sl < 0)
return sl;
+ if (sl > len - 2)
+ return -ENOMEM;
str[sl++] = '\n';
str[sl] = 0;
@@ -288,25 +278,22 @@ void of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
{
const char *compat;
struct alias_prop *app;
- int seen = 0, cplen, sl;
+ struct property *p;
+ int seen = 0;
if ((!dev) || (!dev->of_node))
return;
add_uevent_var(env, "OF_NAME=%s", dev->of_node->name);
- add_uevent_var(env, "OF_FULLNAME=%s", dev->of_node->full_name);
+ add_uevent_var(env, "OF_FULLNAME=%pOF", dev->of_node);
if (dev->of_node->type && strcmp("<NULL>", dev->of_node->type) != 0)
add_uevent_var(env, "OF_TYPE=%s", dev->of_node->type);
/* Since the compatible field can contain pretty much anything
* it's not really legal to split it out with commas. We split it
* up using a number of environment variables instead. */
- compat = of_get_property(dev->of_node, "compatible", &cplen);
- while (compat && *compat && cplen > 0) {
+ of_property_for_each_string(dev->of_node, "compatible", p, compat) {
add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat);
- sl = strlen(compat) + 1;
- compat += sl;
- cplen -= sl;
seen++;
}
add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen);
diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index 0542cf8b6e3dcbab3cc8160f85b00ecfeb463e08..301b6db2b48db7d5826add0fff76721fdf125b3f 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -98,14 +98,14 @@ int of_reconfig_notify(unsigned long action, struct of_reconfig_data *p)
switch (action) {
case OF_RECONFIG_ATTACH_NODE:
case OF_RECONFIG_DETACH_NODE:
- pr_debug("notify %-15s %s\n", action_names[action],
- pr->dn->full_name);
+ pr_debug("notify %-15s %pOF\n", action_names[action],
+ pr->dn);
break;
case OF_RECONFIG_ADD_PROPERTY:
case OF_RECONFIG_REMOVE_PROPERTY:
case OF_RECONFIG_UPDATE_PROPERTY:
- pr_debug("notify %-15s %s:%s\n", action_names[action],
- pr->dn->full_name, pr->prop->name);
+ pr_debug("notify %-15s %pOF:%s\n", action_names[action],
+ pr->dn, pr->prop->name);
break;
}
@@ -328,11 +328,10 @@ void of_node_release(struct kobject *kobj)
/* We should never be releasing nodes that haven't been detached. */
if (!of_node_check_flag(node, OF_DETACHED)) {
- pr_err("ERROR: Bad of_node_put() on %s\n", node->full_name);
+ pr_err("ERROR: Bad of_node_put() on %pOF\n", node);
dump_stack();
return;
}
-
if (!of_node_check_flag(node, OF_DYNAMIC))
return;
@@ -462,13 +461,13 @@ static void __of_changeset_entry_dump(struct of_changeset_entry *ce)
case OF_RECONFIG_ADD_PROPERTY:
case OF_RECONFIG_REMOVE_PROPERTY:
case OF_RECONFIG_UPDATE_PROPERTY:
- pr_debug("cset<%p> %-15s %s/%s\n", ce, action_names[ce->action],
- ce->np->full_name, ce->prop->name);
+ pr_debug("cset<%p> %-15s %pOF/%s\n", ce, action_names[ce->action],
+ ce->np, ce->prop->name);
break;
case OF_RECONFIG_ATTACH_NODE:
case OF_RECONFIG_DETACH_NODE:
- pr_debug("cset<%p> %-15s %s\n", ce, action_names[ce->action],
- ce->np->full_name);
+ pr_debug("cset<%p> %-15s %pOF\n", ce, action_names[ce->action],
+ ce->np);
break;
}
}
@@ -539,7 +538,7 @@ static void __of_changeset_entry_notify(struct of_changeset_entry *ce, bool reve
}
if (ret)
- pr_err("changeset notifier error @%s\n", ce->np->full_name);
+ pr_err("changeset notifier error @%pOF\n", ce->np);
}
static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
@@ -570,8 +569,8 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
ret = __of_add_property(ce->np, ce->prop);
if (ret) {
- pr_err("changeset: add_property failed @%s/%s\n",
- ce->np->full_name,
+ pr_err("changeset: add_property failed @%pOF/%s\n",
+ ce->np,
ce->prop->name);
break;
}
@@ -579,8 +578,8 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
case OF_RECONFIG_REMOVE_PROPERTY:
ret = __of_remove_property(ce->np, ce->prop);
if (ret) {
- pr_err("changeset: remove_property failed @%s/%s\n",
- ce->np->full_name,
+ pr_err("changeset: remove_property failed @%pOF/%s\n",
+ ce->np,
ce->prop->name);
break;
}
@@ -598,8 +597,8 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
ret = __of_update_property(ce->np, ce->prop, &old_prop);
if (ret) {
- pr_err("changeset: update_property failed @%s/%s\n",
- ce->np->full_name,
+ pr_err("changeset: update_property failed @%pOF/%s\n",
+ ce->np,
ce->prop->name);
break;
}
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index ab21c846eb273b515da3723b443bd6bbdfcb2c10..ec00ae7384c237eca360b5e7dd4e8f1eb5785b95 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -59,20 +59,19 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
struct device_node *of_irq_find_parent(struct device_node *child)
{
struct device_node *p;
- const __be32 *parp;
+ phandle parent;
if (!of_node_get(child))
return NULL;
do {
- parp = of_get_property(child, "interrupt-parent", NULL);
- if (parp == NULL)
+ if (of_property_read_u32(child, "interrupt-parent", &parent)) {
p = of_get_parent(child);
- else {
+ } else {
if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
p = of_node_get(of_irq_dflt_pic);
else
- p = of_find_node_by_phandle(be32_to_cpup(parp));
+ p = of_find_node_by_phandle(parent);
}
of_node_put(child);
child = p;
@@ -117,11 +116,8 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
* is none, we are nice and just walk up the tree
*/
do {
- tmp = of_get_property(ipar, "#interrupt-cells", NULL);
- if (tmp != NULL) {
- intsize = be32_to_cpu(*tmp);
+ if (!of_property_read_u32(ipar, "#interrupt-cells", &intsize))
break;
- }
tnode = ipar;
ipar = of_irq_find_parent(ipar);
of_node_put(tnode);
@@ -131,7 +127,7 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
goto fail;
}
- pr_debug("of_irq_parse_raw: ipar=%s, size=%d\n", of_node_full_name(ipar), intsize);
+ pr_debug("of_irq_parse_raw: ipar=%pOF, size=%d\n", ipar, intsize);
if (out_irq->args_count != intsize)
goto fail;
@@ -169,8 +165,7 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
/* Now check if cursor is an interrupt-controller and if it is
* then we are done
*/
- if (of_get_property(ipar, "interrupt-controller", NULL) !=
- NULL) {
+ if (of_property_read_bool(ipar, "interrupt-controller")) {
pr_debug(" -> got it !\n");
return 0;
}
@@ -229,14 +224,14 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
/* Get #interrupt-cells and #address-cells of new
* parent
*/
- tmp = of_get_property(newpar, "#interrupt-cells", NULL);
- if (tmp == NULL) {
+ if (of_property_read_u32(newpar, "#interrupt-cells",
+ &newintsize)) {
pr_debug(" -> parent lacks #interrupt-cells!\n");
goto fail;
}
- newintsize = be32_to_cpu(*tmp);
- tmp = of_get_property(newpar, "#address-cells", NULL);
- newaddrsize = (tmp == NULL) ? 0 : be32_to_cpu(*tmp);
+ if (of_property_read_u32(newpar, "#address-cells",
+ &newaddrsize))
+ newaddrsize = 0;
pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
newintsize, newaddrsize);
@@ -269,7 +264,7 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
skiplevel:
/* Iterate again with new parent */
out_irq->np = newpar;
- pr_debug(" -> new parent: %s\n", of_node_full_name(newpar));
+ pr_debug(" -> new parent: %pOF\n", newpar);
of_node_put(ipar);
ipar = newpar;
newpar = NULL;
@@ -297,11 +292,11 @@ EXPORT_SYMBOL_GPL(of_irq_parse_raw);
int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_args *out_irq)
{
struct device_node *p;
- const __be32 *intspec, *tmp, *addr;
- u32 intsize, intlen;
+ const __be32 *addr;
+ u32 intsize;
int i, res;
- pr_debug("of_irq_parse_one: dev=%s, index=%d\n", of_node_full_name(device), index);
+ pr_debug("of_irq_parse_one: dev=%pOF, index=%d\n", device, index);
/* OldWorld mac stuff is "special", handle out of line */
if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
@@ -316,42 +311,32 @@ int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_ar
if (!res)
return of_irq_parse_raw(addr, out_irq);
- /* Get the interrupts property */
- intspec = of_get_property(device, "interrupts", &intlen);
- if (intspec == NULL)
- return -EINVAL;
-
- intlen /= sizeof(*intspec);
-
- pr_debug(" intspec=%d intlen=%d\n", be32_to_cpup(intspec), intlen);
-
/* Look for the interrupt parent. */
p = of_irq_find_parent(device);
if (p == NULL)
return -EINVAL;
/* Get size of interrupt specifier */
- tmp = of_get_property(p, "#interrupt-cells", NULL);
- if (tmp == NULL) {
+ if (of_property_read_u32(p, "#interrupt-cells", &intsize)) {
res = -EINVAL;
goto out;
}
- intsize = be32_to_cpu(*tmp);
- pr_debug(" intsize=%d intlen=%d\n", intsize, intlen);
-
- /* Check index */
- if ((index + 1) * intsize > intlen) {
- res = -EINVAL;
- goto out;
- }
+ pr_debug(" parent=%pOF, intsize=%d\n", p, intsize);
/* Copy intspec into irq structure */
- intspec += index * intsize;
out_irq->np = p;
out_irq->args_count = intsize;
- for (i = 0; i < intsize; i++)
- out_irq->args[i] = be32_to_cpup(intspec++);
+ for (i = 0; i < intsize; i++) {
+ res = of_property_read_u32_index(device, "interrupts",
+ (index * intsize) + i,
+ out_irq->args + i);
+ if (res)
+ goto out;
+ }
+
+ pr_debug(" intspec=%d\n", *out_irq->args);
+
/* Check if there are any interrupt-map translations to process */
res = of_irq_parse_raw(addr, out_irq);
@@ -508,7 +493,7 @@ void __init of_irq_init(const struct of_device_id *matches)
INIT_LIST_HEAD(&intc_parent_list);
for_each_matching_node_and_match(np, matches, &match) {
- if (!of_find_property(np, "interrupt-controller", NULL) ||
+ if (!of_property_read_bool(np, "interrupt-controller") ||
!of_device_is_available(np))
continue;
@@ -555,8 +540,8 @@ void __init of_irq_init(const struct of_device_id *matches)
of_node_set_flag(desc->dev, OF_POPULATED);
- pr_debug("of_irq_init: init %s (%p), parent %p\n",
- desc->dev->full_name,
+ pr_debug("of_irq_init: init %pOF (%p), parent %p\n",
+ desc->dev,
desc->dev, desc->interrupt_parent);
ret = desc->irq_init_cb(desc->dev,
desc->interrupt_parent);
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index b14a00034fb12a1b493e5f7afeceb7c094532e2b..d94dd8b77abd5140d52c6dfbdff249409225cbec 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -166,8 +166,8 @@ static bool of_mdiobus_child_is_phy(struct device_node *child)
if (of_match_node(whitelist_phys, child)) {
pr_warn(FW_WARN
- "%s: Whitelisted compatible string. Please remove\n",
- child->full_name);
+ "%pOF: Whitelisted compatible string. Please remove\n",
+ child);
return true;
}
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index c9d4d3a7b0fecba0d73cb5642b7be789b6f035ad..e9ec931f5b9a565c7963dc8f3cf1b1c686effa23 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -57,15 +57,14 @@ EXPORT_SYMBOL_GPL(of_pci_find_child_device);
*/
int of_pci_get_devfn(struct device_node *np)
{
- unsigned int size;
- const __be32 *reg;
+ u32 reg[5];
+ int error;
- reg = of_get_property(np, "reg", &size);
+ error = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg));
+ if (error)
+ return error;
- if (!reg || size < 5 * sizeof(__be32))
- return -EINVAL;
-
- return (be32_to_cpup(reg) >> 8) & 0xff;
+ return (reg[0] >> 8) & 0xff;
}
EXPORT_SYMBOL_GPL(of_pci_get_devfn);
@@ -78,16 +77,17 @@ EXPORT_SYMBOL_GPL(of_pci_get_devfn);
*/
int of_pci_parse_bus_range(struct device_node *node, struct resource *res)
{
- const __be32 *values;
- int len;
+ u32 bus_range[2];
+ int error;
- values = of_get_property(node, "bus-range", &len);
- if (!values || len < sizeof(*values) * 2)
- return -EINVAL;
+ error = of_property_read_u32_array(node, "bus-range", bus_range,
+ ARRAY_SIZE(bus_range));
+ if (error)
+ return error;
res->name = node->name;
- res->start = be32_to_cpup(values++);
- res->end = be32_to_cpup(values);
+ res->start = bus_range[0];
+ res->end = bus_range[1];
res->flags = IORESOURCE_BUS;
return 0;
@@ -105,17 +105,14 @@ EXPORT_SYMBOL_GPL(of_pci_parse_bus_range);
*/
int of_get_pci_domain_nr(struct device_node *node)
{
- const __be32 *value;
- int len;
- u16 domain;
-
- value = of_get_property(node, "linux,pci-domain", &len);
- if (!value || len < sizeof(*value))
- return -EINVAL;
+ u32 domain;
+ int error;
- domain = (u16)be32_to_cpup(value);
+ error = of_property_read_u32(node, "linux,pci-domain", &domain);
+ if (error)
+ return error;
- return domain;
+ return (u16)domain;
}
EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
@@ -204,15 +201,15 @@ int of_pci_get_host_bridge_resources(struct device_node *dev,
if (!bus_range)
return -ENOMEM;
- pr_info("host bridge %s ranges:\n", dev->full_name);
+ pr_info("host bridge %pOF ranges:\n", dev);
err = of_pci_parse_bus_range(dev, bus_range);
if (err) {
bus_range->start = busno;
bus_range->end = bus_max;
bus_range->flags = IORESOURCE_BUS;
- pr_info(" No bus range found for %s, using %pR\n",
- dev->full_name, bus_range);
+ pr_info(" No bus range found for %pOF, using %pR\n",
+ dev, bus_range);
} else {
if (bus_range->end > bus_range->start + bus_max)
bus_range->end = bus_range->start + bus_max;
@@ -258,14 +255,14 @@ int of_pci_get_host_bridge_resources(struct device_node *dev,
if (resource_type(res) == IORESOURCE_IO) {
if (!io_base) {
- pr_err("I/O range found for %s. Please provide an io_base pointer to save CPU base address\n",
- dev->full_name);
+ pr_err("I/O range found for %pOF. Please provide an io_base pointer to save CPU base address\n",
+ dev);
err = -EINVAL;
goto conversion_failed;
}
if (*io_base != (resource_size_t)OF_BAD_ADDR)
- pr_warn("More than one I/O resource converted for %s. CPU base address for old range lost!\n",
- dev->full_name);
+ pr_warn("More than one I/O resource converted for %pOF. CPU base address for old range lost!\n",
+ dev);
*io_base = range.cpu_addr;
}
@@ -325,7 +322,7 @@ int of_pci_map_rid(struct device_node *np, u32 rid,
}
if (!map_len || map_len % (4 * sizeof(*map))) {
- pr_err("%s: Error: Bad %s length: %d\n", np->full_name,
+ pr_err("%pOF: Error: Bad %s length: %d\n", np,
map_name, map_len);
return -EINVAL;
}
@@ -349,8 +346,8 @@ int of_pci_map_rid(struct device_node *np, u32 rid,
u32 rid_len = be32_to_cpup(map + 3);
if (rid_base & ~map_mask) {
- pr_err("%s: Invalid %s translation - %s-mask (0x%x) ignores rid-base (0x%x)\n",
- np->full_name, map_name, map_name,
+ pr_err("%pOF: Invalid %s translation - %s-mask (0x%x) ignores rid-base (0x%x)\n",
+ np, map_name, map_name,
map_mask, rid_base);
return -EFAULT;
}
@@ -375,14 +372,13 @@ int of_pci_map_rid(struct device_node *np, u32 rid,
if (id_out)
*id_out = masked_rid - rid_base + out_base;
- pr_debug("%s: %s, using mask %08x, rid-base: %08x, out-base: %08x, length: %08x, rid: %08x -> %08x\n",
- np->full_name, map_name, map_mask, rid_base, out_base,
+ pr_debug("%pOF: %s, using mask %08x, rid-base: %08x, out-base: %08x, length: %08x, rid: %08x -> %08x\n",
+ np, map_name, map_mask, rid_base, out_base,
rid_len, rid, *id_out);
return 0;
}
- pr_err("%s: Invalid %s translation - no match for rid 0x%x on %s\n",
- np->full_name, map_name, rid,
- target && *target ? (*target)->full_name : "any target");
+ pr_err("%pOF: Invalid %s translation - no match for rid 0x%x on %pOF\n",
+ np, map_name, rid, target && *target ? *target : NULL);
return -EFAULT;
}
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index c0e4ee1cd1bad5a57bf8ecb13edbfcdfe7bc2d47..8ecfee31ab6d3874602f9346cf077f985c2d484f 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -35,6 +35,7 @@
struct of_overlay_info {
struct device_node *target;
struct device_node *overlay;
+ bool is_symbols_node;
};
/**
@@ -55,7 +56,8 @@ struct of_overlay {
};
static int of_overlay_apply_one(struct of_overlay *ov,
- struct device_node *target, const struct device_node *overlay);
+ struct device_node *target, const struct device_node *overlay,
+ bool is_symbols_node);
static BLOCKING_NOTIFIER_HEAD(of_overlay_chain);
@@ -92,10 +94,74 @@ static int of_overlay_notify(struct of_overlay *ov,
return 0;
}
+static struct property *dup_and_fixup_symbol_prop(struct of_overlay *ov,
+ const struct property *prop)
+{
+ struct of_overlay_info *ovinfo;
+ struct property *new;
+ const char *overlay_name;
+ char *label_path;
+ char *symbol_path;
+ const char *target_path;
+ int k;
+ int label_path_len;
+ int overlay_name_len;
+ int target_path_len;
+
+ if (!prop->value)
+ return NULL;
+ symbol_path = prop->value;
+
+ new = kzalloc(sizeof(*new), GFP_KERNEL);
+ if (!new)
+ return NULL;
+
+ for (k = 0; k < ov->count; k++) {
+ ovinfo = &ov->ovinfo_tab[k];
+ overlay_name = ovinfo->overlay->full_name;
+ overlay_name_len = strlen(overlay_name);
+ if (!strncasecmp(symbol_path, overlay_name, overlay_name_len))
+ break;
+ }
+
+ if (k >= ov->count)
+ goto err_free;
+
+ target_path = ovinfo->target->full_name;
+ target_path_len = strlen(target_path);
+
+ label_path = symbol_path + overlay_name_len;
+ label_path_len = strlen(label_path);
+
+ new->name = kstrdup(prop->name, GFP_KERNEL);
+ new->length = target_path_len + label_path_len + 1;
+ new->value = kzalloc(new->length, GFP_KERNEL);
+
+ if (!new->name || !new->value)
+ goto err_free;
+
+ strcpy(new->value, target_path);
+ strcpy(new->value + target_path_len, label_path);
+
+ /* mark the property as dynamic */
+ of_property_set_flag(new, OF_DYNAMIC);
+
+ return new;
+
+ err_free:
+ kfree(new->name);
+ kfree(new->value);
+ kfree(new);
+ return NULL;
+
+
+}
+
static int of_overlay_apply_single_property(struct of_overlay *ov,
- struct device_node *target, struct property *prop)
+ struct device_node *target, struct property *prop,
+ bool is_symbols_node)
{
- struct property *propn, *tprop;
+ struct property *propn = NULL, *tprop;
/* NOTE: Multiple changes of single properties not supported */
tprop = of_find_property(target, prop->name, NULL);
@@ -106,7 +172,15 @@ static int of_overlay_apply_single_property(struct of_overlay *ov,
of_prop_cmp(prop->name, "linux,phandle") == 0)
return 0;
- propn = __of_prop_dup(prop, GFP_KERNEL);
+ if (is_symbols_node) {
+ /* changing a property in __symbols__ node not allowed */
+ if (tprop)
+ return -EINVAL;
+ propn = dup_and_fixup_symbol_prop(ov, prop);
+ } else {
+ propn = __of_prop_dup(prop, GFP_KERNEL);
+ }
+
if (propn == NULL)
return -ENOMEM;
@@ -130,18 +204,21 @@ static int of_overlay_apply_single_device_node(struct of_overlay *ov,
return -ENOMEM;
/* NOTE: Multiple mods of created nodes not supported */
- tchild = of_get_child_by_name(target, cname);
+ for_each_child_of_node(target, tchild)
+ if (!of_node_cmp(cname, kbasename(tchild->full_name)))
+ break;
+
if (tchild != NULL) {
/* new overlay phandle value conflicts with existing value */
if (child->phandle)
return -EINVAL;
/* apply overlay recursively */
- ret = of_overlay_apply_one(ov, tchild, child);
+ ret = of_overlay_apply_one(ov, tchild, child, 0);
of_node_put(tchild);
} else {
/* create empty tree as a target */
- tchild = __of_node_dup(child, "%s/%s", target->full_name, cname);
+ tchild = __of_node_dup(child, "%pOF/%s", target, cname);
if (!tchild)
return -ENOMEM;
@@ -152,7 +229,7 @@ static int of_overlay_apply_single_device_node(struct of_overlay *ov,
if (ret)
return ret;
- ret = of_overlay_apply_one(ov, tchild, child);
+ ret = of_overlay_apply_one(ov, tchild, child, 0);
if (ret)
return ret;
}
@@ -168,26 +245,32 @@ static int of_overlay_apply_single_device_node(struct of_overlay *ov,
* by using the changeset.
*/
static int of_overlay_apply_one(struct of_overlay *ov,
- struct device_node *target, const struct device_node *overlay)
+ struct device_node *target, const struct device_node *overlay,
+ bool is_symbols_node)
{
struct device_node *child;
struct property *prop;
int ret;
for_each_property_of_node(overlay, prop) {
- ret = of_overlay_apply_single_property(ov, target, prop);
+ ret = of_overlay_apply_single_property(ov, target, prop,
+ is_symbols_node);
if (ret) {
- pr_err("Failed to apply prop @%s/%s\n",
- target->full_name, prop->name);
+ pr_err("Failed to apply prop @%pOF/%s\n",
+ target, prop->name);
return ret;
}
}
+ /* do not allow symbols node to have any children */
+ if (is_symbols_node)
+ return 0;
+
for_each_child_of_node(overlay, child) {
ret = of_overlay_apply_single_device_node(ov, target, child);
if (ret != 0) {
- pr_err("Failed to apply single node @%s/%s\n",
- target->full_name, child->name);
+ pr_err("Failed to apply single node @%pOF/%s\n",
+ target, child->name);
of_node_put(child);
return ret;
}
@@ -213,9 +296,10 @@ static int of_overlay_apply(struct of_overlay *ov)
for (i = 0; i < ov->count; i++) {
struct of_overlay_info *ovinfo = &ov->ovinfo_tab[i];
- err = of_overlay_apply_one(ov, ovinfo->target, ovinfo->overlay);
+ err = of_overlay_apply_one(ov, ovinfo->target, ovinfo->overlay,
+ ovinfo->is_symbols_node);
if (err != 0) {
- pr_err("apply failed '%s'\n", ovinfo->target->full_name);
+ pr_err("apply failed '%pOF'\n", ovinfo->target);
return err;
}
}
@@ -311,6 +395,9 @@ static int of_build_overlay_info(struct of_overlay *ov,
for_each_child_of_node(tree, node)
cnt++;
+ if (of_get_child_by_name(tree, "__symbols__"))
+ cnt++;
+
ovinfo = kcalloc(cnt, sizeof(*ovinfo), GFP_KERNEL);
if (ovinfo == NULL)
return -ENOMEM;
@@ -322,6 +409,20 @@ static int of_build_overlay_info(struct of_overlay *ov,
cnt++;
}
+ node = of_get_child_by_name(tree, "__symbols__");
+ if (node) {
+ ovinfo[cnt].overlay = node;
+ ovinfo[cnt].target = of_find_node_by_path("/__symbols__");
+ ovinfo[cnt].is_symbols_node = 1;
+
+ if (!ovinfo[cnt].target) {
+ pr_err("no symbols in root of device tree.\n");
+ return -EINVAL;
+ }
+
+ cnt++;
+ }
+
/* if nothing filled, return error */
if (cnt == 0) {
kfree(ovinfo);
@@ -400,8 +501,8 @@ int of_overlay_create(struct device_node *tree)
/* build the overlay info structures */
err = of_build_overlay_info(ov, tree);
if (err) {
- pr_err("of_build_overlay_info() failed for tree@%s\n",
- tree->full_name);
+ pr_err("of_build_overlay_info() failed for tree@%pOF\n",
+ tree);
goto err_free_idr;
}
@@ -480,9 +581,8 @@ static int overlay_is_topmost(struct of_overlay *ov, struct device_node *dn)
/* check against each subtree affected by this overlay */
list_for_each_entry(ce, &ovt->cset.entries, node) {
if (overlay_subtree_check(ce->np, dn)) {
- pr_err("%s: #%d clashes #%d @%s\n",
- __func__, ov->id, ovt->id,
- dn->full_name);
+ pr_err("%s: #%d clashes #%d @%pOF\n",
+ __func__, ov->id, ovt->id, dn);
return 0;
}
}
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index b195246234989d3f7cb8e9cce3a90efd7f811bd9..ac15d0e3d27d3b16794f427d72d0b89890909ec2 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -118,7 +118,7 @@ struct platform_device *of_device_alloc(struct device_node *np,
int rc, i, num_reg = 0, num_irq;
struct resource *res, temp_res;
- dev = platform_device_alloc("", -1);
+ dev = platform_device_alloc("", PLATFORM_DEVID_NONE);
if (!dev)
return NULL;
@@ -228,7 +228,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
const void *prop;
int i, ret;
- pr_debug("Creating amba device %s\n", node->full_name);
+ pr_debug("Creating amba device %pOF\n", node);
if (!of_device_is_available(node) ||
of_node_test_and_set_flag(node, OF_POPULATED))
@@ -259,15 +259,15 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
ret = of_address_to_resource(node, 0, &dev->res);
if (ret) {
- pr_err("amba: of_address_to_resource() failed (%d) for %s\n",
- ret, node->full_name);
+ pr_err("amba: of_address_to_resource() failed (%d) for %pOF\n",
+ ret, node);
goto err_free;
}
ret = amba_device_add(dev, &iomem_resource);
if (ret) {
- pr_err("amba_device_add() failed (%d) for %s\n",
- ret, node->full_name);
+ pr_err("amba_device_add() failed (%d) for %pOF\n",
+ ret, node);
goto err_free;
}
@@ -310,7 +310,7 @@ static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *l
if (!of_address_to_resource(np, 0, &res))
if (res.start != auxdata->phys_addr)
continue;
- pr_debug("%s: devname=%s\n", np->full_name, auxdata->name);
+ pr_debug("%pOF: devname=%s\n", np, auxdata->name);
return auxdata;
}
@@ -323,7 +323,7 @@ static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *l
if (!of_device_is_compatible(np, auxdata->compatible))
continue;
if (!auxdata->phys_addr && !auxdata->name) {
- pr_debug("%s: compatible match\n", np->full_name);
+ pr_debug("%pOF: compatible match\n", np);
return auxdata;
}
}
@@ -356,14 +356,14 @@ static int of_platform_bus_create(struct device_node *bus,
/* Make sure it has a compatible property */
if (strict && (!of_get_property(bus, "compatible", NULL))) {
- pr_debug("%s() - skipping %s, no compatible prop\n",
- __func__, bus->full_name);
+ pr_debug("%s() - skipping %pOF, no compatible prop\n",
+ __func__, bus);
return 0;
}
if (of_node_check_flag(bus, OF_POPULATED_BUS)) {
- pr_debug("%s() - skipping %s, already populated\n",
- __func__, bus->full_name);
+ pr_debug("%s() - skipping %pOF, already populated\n",
+ __func__, bus);
return 0;
}
@@ -387,7 +387,7 @@ static int of_platform_bus_create(struct device_node *bus,
return 0;
for_each_child_of_node(bus, child) {
- pr_debug(" create child: %s\n", child->full_name);
+ pr_debug(" create child: %pOF\n", child);
rc = of_platform_bus_create(child, matches, lookup, &dev->dev, strict);
if (rc) {
of_node_put(child);
@@ -419,7 +419,7 @@ int of_platform_bus_probe(struct device_node *root,
return -EINVAL;
pr_debug("%s()\n", __func__);
- pr_debug(" starting at: %s\n", root->full_name);
+ pr_debug(" starting at: %pOF\n", root);
/* Do a self check of bus type, if there's a match, create children */
if (of_match_node(matches, root)) {
@@ -471,7 +471,7 @@ int of_platform_populate(struct device_node *root,
return -EINVAL;
pr_debug("%s()\n", __func__);
- pr_debug(" starting at: %s\n", root->full_name);
+ pr_debug(" starting at: %pOF\n", root);
for_each_child_of_node(root, child) {
rc = of_platform_bus_create(child, matches, lookup, parent, true);
@@ -660,8 +660,8 @@ static int of_platform_notify(struct notifier_block *nb,
of_dev_put(pdev_parent);
if (pdev == NULL) {
- pr_err("%s: failed to create for '%s'\n",
- __func__, rd->dn->full_name);
+ pr_err("%s: failed to create for '%pOF'\n",
+ __func__, rd->dn);
/* of_platform_device_create tosses the error code */
return notifier_from_errno(-EINVAL);
}
diff --git a/drivers/of/property.c b/drivers/of/property.c
index ed9c3827fad2c32d0ebccb34943177f7c0189ec6..fbb72116e9d456b8a08672391de9e2cc144ed171 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -55,8 +55,8 @@ int of_property_count_elems_of_size(const struct device_node *np,
return -ENODATA;
if (prop->length % elem_size != 0) {
- pr_err("size of %s in node %s is not a multiple of %d\n",
- propname, np->full_name, elem_size);
+ pr_err("size of %s in node %pOF is not a multiple of %d\n",
+ propname, np, elem_size);
return -EINVAL;
}
@@ -537,8 +537,8 @@ int of_graph_parse_endpoint(const struct device_node *node,
{
struct device_node *port_node = of_get_parent(node);
- WARN_ONCE(!port_node, "%s(): endpoint %s has no parent node\n",
- __func__, node->full_name);
+ WARN_ONCE(!port_node, "%s(): endpoint %pOF has no parent node\n",
+ __func__, node);
memset(endpoint, 0, sizeof(*endpoint));
@@ -621,14 +621,13 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
of_node_put(node);
if (!port) {
- pr_err("graph: no port node found in %s\n",
- parent->full_name);
+ pr_err("graph: no port node found in %pOF\n", parent);
return NULL;
}
} else {
port = of_get_parent(prev);
- if (WARN_ONCE(!port, "%s(): endpoint %s has no parent node\n",
- __func__, prev->full_name))
+ if (WARN_ONCE(!port, "%s(): endpoint %pOF has no parent node\n",
+ __func__, prev))
return NULL;
}
@@ -797,8 +796,8 @@ struct device_node *of_graph_get_remote_node(const struct device_node *node,
endpoint_node = of_graph_get_endpoint_by_regs(node, port, endpoint);
if (!endpoint_node) {
- pr_debug("no valid endpoint (%d, %d) for node %s\n",
- port, endpoint, node->full_name);
+ pr_debug("no valid endpoint (%d, %d) for node %pOF\n",
+ port, endpoint, node);
return NULL;
}
@@ -945,8 +944,8 @@ of_fwnode_graph_get_next_endpoint(const struct fwnode_handle *fwnode,
static struct fwnode_handle *
of_fwnode_graph_get_remote_endpoint(const struct fwnode_handle *fwnode)
{
- return of_fwnode_handle(of_parse_phandle(to_of_node(fwnode),
- "remote-endpoint", 0));
+ return of_fwnode_handle(
+ of_graph_get_remote_endpoint(to_of_node(fwnode)));
}
static struct fwnode_handle *
diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index 6e00a9c69e584bf5ee9067b6a662f0ed0b2ca0db..2d135fba94c16191fb70eb8146dc4d188e9a4add 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -1,18 +1,27 @@
obj-y += testcases.dtb.o
+
+targets += testcases.dtb testcases.dtb.S
+
+ifdef CONFIG_OF_OVERLAY
+
obj-y += overlay.dtb.o
obj-y += overlay_bad_phandle.dtb.o
+obj-y += overlay_bad_symbol.dtb.o
obj-y += overlay_base.dtb.o
-targets += testcases.dtb testcases.dtb.S
targets += overlay.dtb overlay.dtb.S
targets += overlay_bad_phandle.dtb overlay_bad_phandle.dtb.S
+targets += overlay_bad_symbol.dtb overlay_bad_symbol.dtb.S
targets += overlay_base.dtb overlay_base.dtb.S
-.PRECIOUS: \
- $(obj)/%.dtb.S \
- $(obj)/%.dtb
-
# enable creation of __symbols__ node
DTC_FLAGS_overlay := -@
DTC_FLAGS_overlay_bad_phandle := -@
+DTC_FLAGS_overlay_bad_symbol := -@
DTC_FLAGS_overlay_base := -@
+
+endif
+
+.PRECIOUS: \
+ $(obj)/%.dtb.S \
+ $(obj)/%.dtb
diff --git a/drivers/of/unittest-data/overlay.dts b/drivers/of/unittest-data/overlay.dts
index 6cd7e6a0c13ea2eff0791b8c68bc1476cb529099..9e791fcf05ddb1f4a173f5a2054d321136085068 100644
--- a/drivers/of/unittest-data/overlay.dts
+++ b/drivers/of/unittest-data/overlay.dts
@@ -7,7 +7,7 @@
target = <&electric_1>;
__overlay__ {
- status = "ok";
+ status = "okay";
hvac_2: hvac-large-1 {
compatible = "ot,hvac-large";
@@ -23,9 +23,24 @@
__overlay__ {
#address-cells = <1>;
#size-cells = <1>;
- status = "ok";
+ status = "okay";
- ride@200 {
+ ride@100 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ track@30 {
+ incline-up = < 48 32 16 >;
+ };
+
+ track@40 {
+ incline-up = < 47 31 15 >;
+ };
+ };
+
+ ride_200: ride@200 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "ot,ferris-wheel";
reg = < 0x00000200 0x100 >;
hvac-provider = < &hvac_2 >;
@@ -36,6 +51,14 @@
spin-rph = < 30 >;
gondolas = < 16 >;
gondola-capacity = < 6 >;
+
+ ride_200_left: track@10 {
+ reg = < 0x00000010 0x10 >;
+ };
+
+ ride_200_right: track@20 {
+ reg = < 0x00000020 0x10 >;
+ };
};
};
};
@@ -44,7 +67,7 @@
target = <&lights_2>;
__overlay__ {
- status = "ok";
+ status = "okay";
color = "purple", "white", "red", "green";
rate = < 3 256 >;
};
diff --git a/drivers/of/unittest-data/overlay_bad_symbol.dts b/drivers/of/unittest-data/overlay_bad_symbol.dts
new file mode 100644
index 0000000000000000000000000000000000000000..09261cb9a67ee9f308480dfc0c0ea092b430a7bf
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_bad_symbol.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+/plugin/;
+
+/ {
+
+ fragment@0 {
+ target = <&electric_1>;
+
+ __overlay__ {
+
+ // This label should cause an error when the overlay
+ // is applied. There is already a symbol hvac_1
+ // in the base tree
+ hvac_1: hvac-medium-2 {
+ compatible = "ot,hvac-medium";
+ heat-range = < 50 75 >;
+ cool-range = < 60 80 >;
+ };
+
+ };
+ };
+};
diff --git a/drivers/of/unittest-data/overlay_base.dts b/drivers/of/unittest-data/overlay_base.dts
index 5566b27fb61a36c712af96633f716ada76f4cc46..453d0bd83320bc4c6a2fde500273349807b009c8 100644
--- a/drivers/of/unittest-data/overlay_base.dts
+++ b/drivers/of/unittest-data/overlay_base.dts
@@ -44,6 +44,8 @@
orientation = < 127 >;
ride@100 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "ot,roller-coaster";
reg = < 0x00000100 0x100 >;
hvac-provider = < &hvac_1 >;
@@ -53,6 +55,15 @@
spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
spin-controller-names = "track_1", "track_2";
queues = < 2 >;
+
+ track@30 {
+ reg = < 0x00000030 0x10 >;
+ };
+
+ track@40 {
+ reg = < 0x00000040 0x10 >;
+ };
+
};
};
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 0107fc68033501bd6002ab8fe35b200a2c9c32dd..29a35cb1da64c070ff1b6a96a76ad54d7c4cb636 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -46,46 +46,54 @@ static struct unittest_results {
static void __init of_unittest_find_node_by_name(void)
{
struct device_node *np;
- const char *options;
+ const char *options, *name;
np = of_find_node_by_path("/testcase-data");
- unittest(np && !strcmp("/testcase-data", np->full_name),
+ name = kasprintf(GFP_KERNEL, "%pOF", np);
+ unittest(np && !strcmp("/testcase-data", name),
"find /testcase-data failed\n");
of_node_put(np);
+ kfree(name);
/* Test if trailing '/' works */
np = of_find_node_by_path("/testcase-data/");
unittest(!np, "trailing '/' on /testcase-data/ should fail\n");
np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a");
- unittest(np && !strcmp("/testcase-data/phandle-tests/consumer-a", np->full_name),
+ name = kasprintf(GFP_KERNEL, "%pOF", np);
+ unittest(np && !strcmp("/testcase-data/phandle-tests/consumer-a", name),
"find /testcase-data/phandle-tests/consumer-a failed\n");
of_node_put(np);
+ kfree(name);
np = of_find_node_by_path("testcase-alias");
- unittest(np && !strcmp("/testcase-data", np->full_name),
+ name = kasprintf(GFP_KERNEL, "%pOF", np);
+ unittest(np && !strcmp("/testcase-data", name),
"find testcase-alias failed\n");
of_node_put(np);
+ kfree(name);
/* Test if trailing '/' works on aliases */
np = of_find_node_by_path("testcase-alias/");
unittest(!np, "trailing '/' on testcase-alias/ should fail\n");
np = of_find_node_by_path("testcase-alias/phandle-tests/consumer-a");
- unittest(np && !strcmp("/testcase-data/phandle-tests/consumer-a", np->full_name),
+ name = kasprintf(GFP_KERNEL, "%pOF", np);
+ unittest(np && !strcmp("/testcase-data/phandle-tests/consumer-a", name),
"find testcase-alias/phandle-tests/consumer-a failed\n");
of_node_put(np);
+ kfree(name);
np = of_find_node_by_path("/testcase-data/missing-path");
- unittest(!np, "non-existent path returned node %s\n", np->full_name);
+ unittest(!np, "non-existent path returned node %pOF\n", np);
of_node_put(np);
np = of_find_node_by_path("missing-alias");
- unittest(!np, "non-existent alias returned node %s\n", np->full_name);
+ unittest(!np, "non-existent alias returned node %pOF\n", np);
of_node_put(np);
np = of_find_node_by_path("testcase-alias/missing-path");
- unittest(!np, "non-existent alias with relative path returned node %s\n", np->full_name);
+ unittest(!np, "non-existent alias with relative path returned node %pOF\n", np);
of_node_put(np);
np = of_find_node_opts_by_path("/testcase-data:testoption", &options);
@@ -315,8 +323,8 @@ static void __init of_unittest_check_phandles(void)
hash_for_each_possible(phandle_ht, nh, node, np->phandle) {
if (nh->np->phandle == np->phandle) {
- pr_info("Duplicate phandle! %i used by %s and %s\n",
- np->phandle, nh->np->full_name, np->full_name);
+ pr_info("Duplicate phandle! %i used by %pOF and %pOF\n",
+ np->phandle, nh->np, np);
dup_count++;
break;
}
@@ -406,8 +414,8 @@ static void __init of_unittest_parse_phandle_with_args(void)
passed = false;
}
- unittest(passed, "index %i - data error on node %s rc=%i\n",
- i, args.np->full_name, rc);
+ unittest(passed, "index %i - data error on node %pOF rc=%i\n",
+ i, args.np, rc);
}
/* Check for missing list property */
@@ -590,7 +598,7 @@ static void __init of_unittest_changeset(void)
/* Make sure node names are constructed correctly */
unittest((np = of_find_node_by_path("/testcase-data/changeset/n2/n21")),
- "'%s' not added\n", n21->full_name);
+ "'%pOF' not added\n", n21);
of_node_put(np);
unittest(!of_changeset_revert(&chgset), "revert failed\n");
@@ -621,8 +629,8 @@ static void __init of_unittest_parse_interrupts(void)
passed &= (args.args_count == 1);
passed &= (args.args[0] == (i + 1));
- unittest(passed, "index %i - data error on node %s rc=%i\n",
- i, args.np->full_name, rc);
+ unittest(passed, "index %i - data error on node %pOF rc=%i\n",
+ i, args.np, rc);
}
of_node_put(np);
@@ -667,8 +675,8 @@ static void __init of_unittest_parse_interrupts(void)
default:
passed = false;
}
- unittest(passed, "index %i - data error on node %s rc=%i\n",
- i, args.np->full_name, rc);
+ unittest(passed, "index %i - data error on node %pOF rc=%i\n",
+ i, args.np, rc);
}
of_node_put(np);
}
@@ -737,8 +745,8 @@ static void __init of_unittest_parse_interrupts_extended(void)
passed = false;
}
- unittest(passed, "index %i - data error on node %s rc=%i\n",
- i, args.np->full_name, rc);
+ unittest(passed, "index %i - data error on node %pOF rc=%i\n",
+ i, args.np, rc);
}
of_node_put(np);
}
@@ -917,8 +925,11 @@ static int attach_node_and_children(struct device_node *np)
{
struct device_node *next, *dup, *child;
unsigned long flags;
+ const char *full_name;
- dup = of_find_node_by_path(np->full_name);
+ full_name = kasprintf(GFP_KERNEL, "%pOF", np);
+ dup = of_find_node_by_path(full_name);
+ kfree(full_name);
if (dup) {
update_node_properties(np, dup);
return 0;
@@ -1023,7 +1034,7 @@ static int unittest_probe(struct platform_device *pdev)
}
- dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name);
+ dev_dbg(dev, "%s for node @%pOF\n", __func__, np);
of_platform_populate(np, NULL, NULL, &pdev->dev);
@@ -1035,7 +1046,7 @@ static int unittest_remove(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
- dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name);
+ dev_dbg(dev, "%s for node @%pOF\n", __func__, np);
return 0;
}
@@ -1649,7 +1660,7 @@ static int unittest_i2c_bus_probe(struct platform_device *pdev)
}
- dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name);
+ dev_dbg(dev, "%s for node @%pOF\n", __func__, np);
std = devm_kzalloc(dev, sizeof(*std), GFP_KERNEL);
if (!std) {
@@ -1687,7 +1698,7 @@ static int unittest_i2c_bus_remove(struct platform_device *pdev)
struct device_node *np = dev->of_node;
struct unittest_i2c_bus_data *std = platform_get_drvdata(pdev);
- dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name);
+ dev_dbg(dev, "%s for node @%pOF\n", __func__, np);
i2c_del_adapter(&std->adap);
return 0;
@@ -1718,7 +1729,7 @@ static int unittest_i2c_dev_probe(struct i2c_client *client,
return -EINVAL;
}
- dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name);
+ dev_dbg(dev, "%s for node @%pOF\n", __func__, np);
return 0;
};
@@ -1728,7 +1739,7 @@ static int unittest_i2c_dev_remove(struct i2c_client *client)
struct device *dev = &client->dev;
struct device_node *np = client->dev.of_node;
- dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name);
+ dev_dbg(dev, "%s for node @%pOF\n", __func__, np);
return 0;
}
@@ -1763,7 +1774,7 @@ static int unittest_i2c_mux_probe(struct i2c_client *client,
struct i2c_mux_core *muxc;
u32 reg, max_reg;
- dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name);
+ dev_dbg(dev, "%s for node @%pOF\n", __func__, np);
if (!np) {
dev_err(dev, "No OF node\n");
@@ -1808,7 +1819,7 @@ static int unittest_i2c_mux_remove(struct i2c_client *client)
struct device_node *np = client->dev.of_node;
struct i2c_mux_core *muxc = i2c_get_clientdata(client);
- dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name);
+ dev_dbg(dev, "%s for node @%pOF\n", __func__, np);
i2c_mux_del_adapters(muxc);
return 0;
}
@@ -1983,6 +1994,8 @@ static void __init of_unittest_overlay(void)
static inline void __init of_unittest_overlay(void) { }
#endif
+#ifdef CONFIG_OF_OVERLAY
+
/*
* __dtb_ot_begin[] and __dtb_ot_end[] are created by cmd_dt_S_dtb
* in scripts/Makefile.lib
@@ -2010,14 +2023,14 @@ struct overlay_info {
OVERLAY_INFO_EXTERN(overlay_base);
OVERLAY_INFO_EXTERN(overlay);
OVERLAY_INFO_EXTERN(overlay_bad_phandle);
-
-#ifdef CONFIG_OF_OVERLAY
+OVERLAY_INFO_EXTERN(overlay_bad_symbol);
/* order of entries is hard-coded into users of overlays[] */
static struct overlay_info overlays[] = {
OVERLAY_INFO(overlay_base, -9999),
OVERLAY_INFO(overlay, 0),
OVERLAY_INFO(overlay_bad_phandle, -EINVAL),
+ OVERLAY_INFO(overlay_bad_symbol, -EINVAL),
{}
};
@@ -2289,6 +2302,10 @@ static __init void of_unittest_overlay_high_level(void)
unittest(overlay_data_add(2),
"Adding overlay 'overlay_bad_phandle' failed\n");
+
+ unittest(overlay_data_add(3),
+ "Adding overlay 'overlay_bad_symbol' failed\n");
+
return;
err_unlock:
diff --git a/drivers/virt/fsl_hypervisor.c b/drivers/virt/fsl_hypervisor.c
index d3eca879a0a85474f858e79b759d8b4920ba9709..d993df5586c00262d5f3be583e53baf27b26573a 100644
--- a/drivers/virt/fsl_hypervisor.c
+++ b/drivers/virt/fsl_hypervisor.c
@@ -841,8 +841,8 @@ static int __init fsl_hypervisor_init(void)
handle = of_get_property(np, "interrupts", NULL);
irq = irq_of_parse_and_map(np, 0);
if (!handle || (irq == NO_IRQ)) {
- pr_err("fsl-hv: no 'interrupts' property in %s node\n",
- np->full_name);
+ pr_err("fsl-hv: no 'interrupts' property in %pOF node\n",
+ np);
continue;
}
@@ -869,8 +869,8 @@ static int __init fsl_hypervisor_init(void)
*/
dbisr->partition = ret = get_parent_handle(np);
if (ret < 0) {
- pr_err("fsl-hv: node %s has missing or "
- "malformed parent\n", np->full_name);
+ pr_err("fsl-hv: node %pOF has missing or "
+ "malformed parent\n", np);
kfree(dbisr);
continue;
}
@@ -881,8 +881,8 @@ static int __init fsl_hypervisor_init(void)
ret = request_irq(irq, fsl_hv_isr, 0, np->name, dbisr);
if (ret < 0) {
- pr_err("fsl-hv: could not request irq %u for node %s\n",
- irq, np->full_name);
+ pr_err("fsl-hv: could not request irq %u for node %pOF\n",
+ irq, np);
kfree(dbisr);
continue;
}
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index b4ad8b4f85065dae43ab10be81ac27851b4802e7..611502524425c8d7a57753efe693b3317c0a9726 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -50,7 +50,7 @@ static inline struct device_node *of_cpu_device_node_get(int cpu)
struct device *cpu_dev;
cpu_dev = get_cpu_device(cpu);
if (!cpu_dev)
- return NULL;
+ return of_get_cpu_node(cpu, NULL);
return of_node_get(cpu_dev->of_node);
}
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 58c05e5d9870b6c18a72da7dc44ff3112994946d..dcc0d5fdf5a26728981ba8c7ac22318f1c406b67 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -173,10 +173,10 @@ cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
ld_flags = $(LDFLAGS) $(ldflags-y)
+DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes
+
dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \
- -I$(srctree)/arch/$(SRCARCH)/boot/dts \
- -I$(srctree)/scripts/dtc/include-prefixes \
- -I$(srctree)/drivers/of/testcase-data \
+ $(addprefix -I,$(DTC_INCLUDE)) \
-undef -D__DTS__
# Finds the multi-part object the current object will be linked into
@@ -317,7 +317,7 @@ quiet_cmd_dtc = DTC $@
cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
$(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
$(DTC) -O dtb -o $@ -b 0 \
- -i $(dir $<) $(DTC_FLAGS) \
+ $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
-d $(depfile).dtc.tmp $(dtc-tmp) ; \
cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)