diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
index 055227cb3d43c4bb6f51f2611aa57d5fc9b9936a..67b8817995c047b791c638da6e1131f9f967f222 100644
--- a/drivers/iio/accel/adxl372.c
+++ b/drivers/iio/accel/adxl372.c
@@ -474,12 +474,17 @@ static int adxl372_configure_fifo(struct adxl372_state *st)
if (ret < 0)
return ret;
- fifo_samples = st->watermark & 0xFF;
+ /*
+ * watermark stores the number of sets; we need to write the FIFO
+ * registers with the number of samples
+ */
+ fifo_samples = (st->watermark * st->fifo_set_size);
fifo_ctl = ADXL372_FIFO_CTL_FORMAT_MODE(st->fifo_format) |
ADXL372_FIFO_CTL_MODE_MODE(st->fifo_mode) |
- ADXL372_FIFO_CTL_SAMPLES_MODE(st->watermark);
+ ADXL372_FIFO_CTL_SAMPLES_MODE(fifo_samples);
- ret = regmap_write(st->regmap, ADXL372_FIFO_SAMPLES, fifo_samples);
+ ret = regmap_write(st->regmap,
+ ADXL372_FIFO_SAMPLES, fifo_samples & 0xFF);
if (ret < 0)
return ret;
@@ -548,8 +553,7 @@ static irqreturn_t adxl372_trigger_handler(int irq, void *p)
goto err;
/* Each sample is 2 bytes */
- for (i = 0; i < fifo_entries * sizeof(u16);
- i += st->fifo_set_size * sizeof(u16))
+ for (i = 0; i < fifo_entries; i += st->fifo_set_size)
iio_push_to_buffers(indio_dev, &st->fifo_buf[i]);
}
err:
@@ -571,6 +575,14 @@ static int adxl372_setup(struct adxl372_state *st)
return -ENODEV;
}
+ /*
+ * Perform a software reset to make sure the device is in a consistent
+ * state after start up.
+ */
+ ret = regmap_write(st->regmap, ADXL372_RESET, ADXL372_RESET_CODE);
+ if (ret < 0)
+ return ret;
+
ret = adxl372_set_op_mode(st, ADXL372_STANDBY);
if (ret < 0)
return ret;
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index cf6c0e3a83d381db42c202da4897cbf4a620e717..121b4e89f038c7782d86d8aaee0fd6ba0043721a 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -117,7 +117,7 @@
#define BMC150_ACCEL_SLEEP_1_SEC 0x0F
#define BMC150_ACCEL_REG_TEMP 0x08
-#define BMC150_ACCEL_TEMP_CENTER_VAL 24
+#define BMC150_ACCEL_TEMP_CENTER_VAL 23
#define BMC150_ACCEL_AXIS_TO_REG(axis) (BMC150_ACCEL_REG_XOUT_L + (axis * 2))
#define BMC150_AUTO_SUSPEND_DELAY_MS 2000
diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index 5a3ca5904dedc421d501548cf656775a22ca4853..f658012baad88d11fd148306e152cc73b8ea5d6d 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -810,10 +810,10 @@ static int ad799x_probe(struct i2c_client *client,
ret = ad799x_write_config(st, st->chip_config->default_config);
if (ret < 0)
- goto error_disable_reg;
+ goto error_disable_vref;
ret = ad799x_read_config(st);
if (ret < 0)
- goto error_disable_reg;
+ goto error_disable_vref;
st->config = ret;
ret = iio_triggered_buffer_setup(indio_dev, NULL,
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index adc9cf7a075d200702cc34665e271a0e174d241a..8ea2aed6d6f5a2179f5d6b0cc51abf4f42fa93ad 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -7,6 +7,7 @@
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
+#include <linux/dmi.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
@@ -25,6 +26,11 @@
#define AXP288_ADC_EN_MASK 0xF0
#define AXP288_ADC_TS_ENABLE 0x01
+#define AXP288_ADC_TS_BIAS_MASK GENMASK(5, 4)
+#define AXP288_ADC_TS_BIAS_20UA (0 << 4)
+#define AXP288_ADC_TS_BIAS_40UA (1 << 4)
+#define AXP288_ADC_TS_BIAS_60UA (2 << 4)
+#define AXP288_ADC_TS_BIAS_80UA (3 << 4)
#define AXP288_ADC_TS_CURRENT_ON_OFF_MASK GENMASK(1, 0)
#define AXP288_ADC_TS_CURRENT_OFF (0 << 0)
#define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING (1 << 0)
@@ -177,10 +183,36 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
return ret;
}
+/*
+ * We rely on the machine's firmware to correctly setup the TS pin bias current
+ * at boot. This lists systems with broken fw where we need to set it ourselves.
+ */
+static const struct dmi_system_id axp288_adc_ts_bias_override[] = {
+ {
+ /* Lenovo Ideapad 100S (11 inch) */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 100S-11IBY"),
+ },
+ .driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA,
+ },
+ {}
+};
+
static int axp288_adc_initialize(struct axp288_adc_info *info)
{
+ const struct dmi_system_id *bias_override;
int ret, adc_enable_val;
+ bias_override = dmi_first_match(axp288_adc_ts_bias_override);
+ if (bias_override) {
+ ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+ AXP288_ADC_TS_BIAS_MASK,
+ (uintptr_t)bias_override->driver_data);
+ if (ret)
+ return ret;
+ }
+
/*
* Determine if the TS pin is enabled and set the TS current-source
* accordingly.
diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
index 88c7fe15003b7179d8c4e565fcd7bb3415289baa..62e6c8badd22a8d645c9edb1e0d10784157a5b61 100644
--- a/drivers/iio/adc/hx711.c
+++ b/drivers/iio/adc/hx711.c
@@ -100,14 +100,14 @@ struct hx711_data {
static int hx711_cycle(struct hx711_data *hx711_data)
{
- int val;
+ unsigned long flags;
/*
* if preempted for more then 60us while PD_SCK is high:
* hx711 is going in reset
* ==> measuring is false
*/
- preempt_disable();
+ local_irq_save(flags);
gpiod_set_value(hx711_data->gpiod_pd_sck, 1);
/*
@@ -117,7 +117,6 @@ static int hx711_cycle(struct hx711_data *hx711_data)
*/
ndelay(hx711_data->data_ready_delay_ns);
- val = gpiod_get_value(hx711_data->gpiod_dout);
/*
* here we are not waiting for 0.2 us as suggested by the datasheet,
* because the oscilloscope showed in a test scenario
@@ -125,7 +124,7 @@ static int hx711_cycle(struct hx711_data *hx711_data)
* and 0.56 us for PD_SCK low on TI Sitara with 800 MHz
*/
gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
- preempt_enable();
+ local_irq_restore(flags);
/*
* make it a square wave for addressing cases with capacitance on
@@ -133,7 +132,8 @@ static int hx711_cycle(struct hx711_data *hx711_data)
*/
ndelay(hx711_data->data_ready_delay_ns);
- return val;
+ /* sample as late as possible */
+ return gpiod_get_value(hx711_data->gpiod_dout);
}
static int hx711_read(struct hx711_data *hx711_data)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 7b28d045d2719f3e3a710eaa2ffce0e3183d561e..7b27306330a351f2edbee70f202d7110a79100b3 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -1219,6 +1219,11 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
if (IS_ERR(base))
return PTR_ERR(base);
+ priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+ priv->param->regmap_config);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
if (!irq)
return -EINVAL;
@@ -1228,11 +1233,6 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
if (ret)
return ret;
- priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
- priv->param->regmap_config);
- if (IS_ERR(priv->regmap))
- return PTR_ERR(priv->regmap);
-
priv->clkin = devm_clk_get(&pdev->dev, "clkin");
if (IS_ERR(priv->clkin)) {
dev_err(&pdev->dev, "failed to get clkin\n");
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 9b85fefc0a963f382a0365f6aefec33770a187e1..93a096a91f8c42f7f49cfab43531cdb2fd134cb9 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -24,33 +24,6 @@
#include "stm32-adc-core.h"
-/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
-#define STM32F4_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00)
-#define STM32F4_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x04)
-
-/* STM32F4_ADC_CSR - bit fields */
-#define STM32F4_EOC3 BIT(17)
-#define STM32F4_EOC2 BIT(9)
-#define STM32F4_EOC1 BIT(1)
-
-/* STM32F4_ADC_CCR - bit fields */
-#define STM32F4_ADC_ADCPRE_SHIFT 16
-#define STM32F4_ADC_ADCPRE_MASK GENMASK(17, 16)
-
-/* STM32H7 - common registers for all ADC instances */
-#define STM32H7_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00)
-#define STM32H7_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x08)
-
-/* STM32H7_ADC_CSR - bit fields */
-#define STM32H7_EOC_SLV BIT(18)
-#define STM32H7_EOC_MST BIT(2)
-
-/* STM32H7_ADC_CCR - bit fields */
-#define STM32H7_PRESC_SHIFT 18
-#define STM32H7_PRESC_MASK GENMASK(21, 18)
-#define STM32H7_CKMODE_SHIFT 16
-#define STM32H7_CKMODE_MASK GENMASK(17, 16)
-
#define STM32_ADC_CORE_SLEEP_DELAY_MS 2000
/* SYSCFG registers */
@@ -71,6 +44,8 @@
* @eoc1: adc1 end of conversion flag in @csr
* @eoc2: adc2 end of conversion flag in @csr
* @eoc3: adc3 end of conversion flag in @csr
+ * @ier: interrupt enable register offset for each adc
+ * @eocie_msk: end of conversion interrupt enable mask in @ier
*/
struct stm32_adc_common_regs {
u32 csr;
@@ -78,6 +53,8 @@ struct stm32_adc_common_regs {
u32 eoc1_msk;
u32 eoc2_msk;
u32 eoc3_msk;
+ u32 ier;
+ u32 eocie_msk;
};
struct stm32_adc_priv;
@@ -303,6 +280,8 @@ static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
.eoc1_msk = STM32F4_EOC1,
.eoc2_msk = STM32F4_EOC2,
.eoc3_msk = STM32F4_EOC3,
+ .ier = STM32F4_ADC_CR1,
+ .eocie_msk = STM32F4_EOCIE,
};
/* STM32H7 common registers definitions */
@@ -311,8 +290,24 @@ static const struct stm32_adc_common_regs stm32h7_adc_common_regs = {
.ccr = STM32H7_ADC_CCR,
.eoc1_msk = STM32H7_EOC_MST,
.eoc2_msk = STM32H7_EOC_SLV,
+ .ier = STM32H7_ADC_IER,
+ .eocie_msk = STM32H7_EOCIE,
+};
+
+static const unsigned int stm32_adc_offset[STM32_ADC_MAX_ADCS] = {
+ 0, STM32_ADC_OFFSET, STM32_ADC_OFFSET * 2,
};
+static unsigned int stm32_adc_eoc_enabled(struct stm32_adc_priv *priv,
+ unsigned int adc)
+{
+ u32 ier, offset = stm32_adc_offset[adc];
+
+ ier = readl_relaxed(priv->common.base + offset + priv->cfg->regs->ier);
+
+ return ier & priv->cfg->regs->eocie_msk;
+}
+
/* ADC common interrupt for all instances */
static void stm32_adc_irq_handler(struct irq_desc *desc)
{
@@ -323,13 +318,28 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
chained_irq_enter(chip, desc);
status = readl_relaxed(priv->common.base + priv->cfg->regs->csr);
- if (status & priv->cfg->regs->eoc1_msk)
+ /*
+ * End of conversion may be handled by using IRQ or DMA. There may be a
+ * race here when two conversions complete at the same time on several
+ * ADCs. EOC may be read 'set' for several ADCs, with:
+ * - an ADC configured to use DMA (EOC triggers the DMA request, and
+ * is then automatically cleared by DR read in hardware)
+ * - an ADC configured to use IRQs (EOCIE bit is set. The handler must
+ * be called in this case)
+ * So both EOC status bit in CSR and EOCIE control bit must be checked
+ * before invoking the interrupt handler (e.g. call ISR only for
+ * IRQ-enabled ADCs).
+ */
+ if (status & priv->cfg->regs->eoc1_msk &&
+ stm32_adc_eoc_enabled(priv, 0))
generic_handle_irq(irq_find_mapping(priv->domain, 0));
- if (status & priv->cfg->regs->eoc2_msk)
+ if (status & priv->cfg->regs->eoc2_msk &&
+ stm32_adc_eoc_enabled(priv, 1))
generic_handle_irq(irq_find_mapping(priv->domain, 1));
- if (status & priv->cfg->regs->eoc3_msk)
+ if (status & priv->cfg->regs->eoc3_msk &&
+ stm32_adc_eoc_enabled(priv, 2))
generic_handle_irq(irq_find_mapping(priv->domain, 2));
chained_irq_exit(chip, desc);
diff --git a/drivers/iio/adc/stm32-adc-core.h b/drivers/iio/adc/stm32-adc-core.h
index 8af507b3f32d914d70307bfff7e8819b4284581d..2579d514c2a3448cbd877ec8f3567e8103fc1399 100644
--- a/drivers/iio/adc/stm32-adc-core.h
+++ b/drivers/iio/adc/stm32-adc-core.h
@@ -25,8 +25,145 @@
* --------------------------------------------------------
*/
#define STM32_ADC_MAX_ADCS 3
+#define STM32_ADC_OFFSET 0x100
#define STM32_ADCX_COMN_OFFSET 0x300
+/* STM32F4 - Registers for each ADC instance */
+#define STM32F4_ADC_SR 0x00
+#define STM32F4_ADC_CR1 0x04
+#define STM32F4_ADC_CR2 0x08
+#define STM32F4_ADC_SMPR1 0x0C
+#define STM32F4_ADC_SMPR2 0x10
+#define STM32F4_ADC_HTR 0x24
+#define STM32F4_ADC_LTR 0x28
+#define STM32F4_ADC_SQR1 0x2C
+#define STM32F4_ADC_SQR2 0x30
+#define STM32F4_ADC_SQR3 0x34
+#define STM32F4_ADC_JSQR 0x38
+#define STM32F4_ADC_JDR1 0x3C
+#define STM32F4_ADC_JDR2 0x40
+#define STM32F4_ADC_JDR3 0x44
+#define STM32F4_ADC_JDR4 0x48
+#define STM32F4_ADC_DR 0x4C
+
+/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
+#define STM32F4_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00)
+#define STM32F4_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x04)
+
+/* STM32F4_ADC_SR - bit fields */
+#define STM32F4_STRT BIT(4)
+#define STM32F4_EOC BIT(1)
+
+/* STM32F4_ADC_CR1 - bit fields */
+#define STM32F4_RES_SHIFT 24
+#define STM32F4_RES_MASK GENMASK(25, 24)
+#define STM32F4_SCAN BIT(8)
+#define STM32F4_EOCIE BIT(5)
+
+/* STM32F4_ADC_CR2 - bit fields */
+#define STM32F4_SWSTART BIT(30)
+#define STM32F4_EXTEN_SHIFT 28
+#define STM32F4_EXTEN_MASK GENMASK(29, 28)
+#define STM32F4_EXTSEL_SHIFT 24
+#define STM32F4_EXTSEL_MASK GENMASK(27, 24)
+#define STM32F4_EOCS BIT(10)
+#define STM32F4_DDS BIT(9)
+#define STM32F4_DMA BIT(8)
+#define STM32F4_ADON BIT(0)
+
+/* STM32F4_ADC_CSR - bit fields */
+#define STM32F4_EOC3 BIT(17)
+#define STM32F4_EOC2 BIT(9)
+#define STM32F4_EOC1 BIT(1)
+
+/* STM32F4_ADC_CCR - bit fields */
+#define STM32F4_ADC_ADCPRE_SHIFT 16
+#define STM32F4_ADC_ADCPRE_MASK GENMASK(17, 16)
+
+/* STM32H7 - Registers for each ADC instance */
+#define STM32H7_ADC_ISR 0x00
+#define STM32H7_ADC_IER 0x04
+#define STM32H7_ADC_CR 0x08
+#define STM32H7_ADC_CFGR 0x0C
+#define STM32H7_ADC_SMPR1 0x14
+#define STM32H7_ADC_SMPR2 0x18
+#define STM32H7_ADC_PCSEL 0x1C
+#define STM32H7_ADC_SQR1 0x30
+#define STM32H7_ADC_SQR2 0x34
+#define STM32H7_ADC_SQR3 0x38
+#define STM32H7_ADC_SQR4 0x3C
+#define STM32H7_ADC_DR 0x40
+#define STM32H7_ADC_DIFSEL 0xC0
+#define STM32H7_ADC_CALFACT 0xC4
+#define STM32H7_ADC_CALFACT2 0xC8
+
+/* STM32H7 - common registers for all ADC instances */
+#define STM32H7_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00)
+#define STM32H7_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x08)
+
+/* STM32H7_ADC_ISR - bit fields */
+#define STM32MP1_VREGREADY BIT(12)
+#define STM32H7_EOC BIT(2)
+#define STM32H7_ADRDY BIT(0)
+
+/* STM32H7_ADC_IER - bit fields */
+#define STM32H7_EOCIE STM32H7_EOC
+
+/* STM32H7_ADC_CR - bit fields */
+#define STM32H7_ADCAL BIT(31)
+#define STM32H7_ADCALDIF BIT(30)
+#define STM32H7_DEEPPWD BIT(29)
+#define STM32H7_ADVREGEN BIT(28)
+#define STM32H7_LINCALRDYW6 BIT(27)
+#define STM32H7_LINCALRDYW5 BIT(26)
+#define STM32H7_LINCALRDYW4 BIT(25)
+#define STM32H7_LINCALRDYW3 BIT(24)
+#define STM32H7_LINCALRDYW2 BIT(23)
+#define STM32H7_LINCALRDYW1 BIT(22)
+#define STM32H7_ADCALLIN BIT(16)
+#define STM32H7_BOOST BIT(8)
+#define STM32H7_ADSTP BIT(4)
+#define STM32H7_ADSTART BIT(2)
+#define STM32H7_ADDIS BIT(1)
+#define STM32H7_ADEN BIT(0)
+
+/* STM32H7_ADC_CFGR bit fields */
+#define STM32H7_EXTEN_SHIFT 10
+#define STM32H7_EXTEN_MASK GENMASK(11, 10)
+#define STM32H7_EXTSEL_SHIFT 5
+#define STM32H7_EXTSEL_MASK GENMASK(9, 5)
+#define STM32H7_RES_SHIFT 2
+#define STM32H7_RES_MASK GENMASK(4, 2)
+#define STM32H7_DMNGT_SHIFT 0
+#define STM32H7_DMNGT_MASK GENMASK(1, 0)
+
+enum stm32h7_adc_dmngt {
+ STM32H7_DMNGT_DR_ONLY, /* Regular data in DR only */
+ STM32H7_DMNGT_DMA_ONESHOT, /* DMA one shot mode */
+ STM32H7_DMNGT_DFSDM, /* DFSDM mode */
+ STM32H7_DMNGT_DMA_CIRC, /* DMA circular mode */
+};
+
+/* STM32H7_ADC_CALFACT - bit fields */
+#define STM32H7_CALFACT_D_SHIFT 16
+#define STM32H7_CALFACT_D_MASK GENMASK(26, 16)
+#define STM32H7_CALFACT_S_SHIFT 0
+#define STM32H7_CALFACT_S_MASK GENMASK(10, 0)
+
+/* STM32H7_ADC_CALFACT2 - bit fields */
+#define STM32H7_LINCALFACT_SHIFT 0
+#define STM32H7_LINCALFACT_MASK GENMASK(29, 0)
+
+/* STM32H7_ADC_CSR - bit fields */
+#define STM32H7_EOC_SLV BIT(18)
+#define STM32H7_EOC_MST BIT(2)
+
+/* STM32H7_ADC_CCR - bit fields */
+#define STM32H7_PRESC_SHIFT 18
+#define STM32H7_PRESC_MASK GENMASK(21, 18)
+#define STM32H7_CKMODE_SHIFT 16
+#define STM32H7_CKMODE_MASK GENMASK(17, 16)
+
/**
* struct stm32_adc_common - stm32 ADC driver common data (for all instances)
* @base: control registers base cpu addr
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 6a7dd08b1e0b1fde1fbf361135228b969b7597fe..663f8a5012d64123b06a646887c4c75a5f9860e1 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -28,115 +28,6 @@
#include "stm32-adc-core.h"
-/* STM32F4 - Registers for each ADC instance */
-#define STM32F4_ADC_SR 0x00
-#define STM32F4_ADC_CR1 0x04
-#define STM32F4_ADC_CR2 0x08
-#define STM32F4_ADC_SMPR1 0x0C
-#define STM32F4_ADC_SMPR2 0x10
-#define STM32F4_ADC_HTR 0x24
-#define STM32F4_ADC_LTR 0x28
-#define STM32F4_ADC_SQR1 0x2C
-#define STM32F4_ADC_SQR2 0x30
-#define STM32F4_ADC_SQR3 0x34
-#define STM32F4_ADC_JSQR 0x38
-#define STM32F4_ADC_JDR1 0x3C
-#define STM32F4_ADC_JDR2 0x40
-#define STM32F4_ADC_JDR3 0x44
-#define STM32F4_ADC_JDR4 0x48
-#define STM32F4_ADC_DR 0x4C
-
-/* STM32F4_ADC_SR - bit fields */
-#define STM32F4_STRT BIT(4)
-#define STM32F4_EOC BIT(1)
-
-/* STM32F4_ADC_CR1 - bit fields */
-#define STM32F4_RES_SHIFT 24
-#define STM32F4_RES_MASK GENMASK(25, 24)
-#define STM32F4_SCAN BIT(8)
-#define STM32F4_EOCIE BIT(5)
-
-/* STM32F4_ADC_CR2 - bit fields */
-#define STM32F4_SWSTART BIT(30)
-#define STM32F4_EXTEN_SHIFT 28
-#define STM32F4_EXTEN_MASK GENMASK(29, 28)
-#define STM32F4_EXTSEL_SHIFT 24
-#define STM32F4_EXTSEL_MASK GENMASK(27, 24)
-#define STM32F4_EOCS BIT(10)
-#define STM32F4_DDS BIT(9)
-#define STM32F4_DMA BIT(8)
-#define STM32F4_ADON BIT(0)
-
-/* STM32H7 - Registers for each ADC instance */
-#define STM32H7_ADC_ISR 0x00
-#define STM32H7_ADC_IER 0x04
-#define STM32H7_ADC_CR 0x08
-#define STM32H7_ADC_CFGR 0x0C
-#define STM32H7_ADC_SMPR1 0x14
-#define STM32H7_ADC_SMPR2 0x18
-#define STM32H7_ADC_PCSEL 0x1C
-#define STM32H7_ADC_SQR1 0x30
-#define STM32H7_ADC_SQR2 0x34
-#define STM32H7_ADC_SQR3 0x38
-#define STM32H7_ADC_SQR4 0x3C
-#define STM32H7_ADC_DR 0x40
-#define STM32H7_ADC_DIFSEL 0xC0
-#define STM32H7_ADC_CALFACT 0xC4
-#define STM32H7_ADC_CALFACT2 0xC8
-
-/* STM32H7_ADC_ISR - bit fields */
-#define STM32MP1_VREGREADY BIT(12)
-#define STM32H7_EOC BIT(2)
-#define STM32H7_ADRDY BIT(0)
-
-/* STM32H7_ADC_IER - bit fields */
-#define STM32H7_EOCIE STM32H7_EOC
-
-/* STM32H7_ADC_CR - bit fields */
-#define STM32H7_ADCAL BIT(31)
-#define STM32H7_ADCALDIF BIT(30)
-#define STM32H7_DEEPPWD BIT(29)
-#define STM32H7_ADVREGEN BIT(28)
-#define STM32H7_LINCALRDYW6 BIT(27)
-#define STM32H7_LINCALRDYW5 BIT(26)
-#define STM32H7_LINCALRDYW4 BIT(25)
-#define STM32H7_LINCALRDYW3 BIT(24)
-#define STM32H7_LINCALRDYW2 BIT(23)
-#define STM32H7_LINCALRDYW1 BIT(22)
-#define STM32H7_ADCALLIN BIT(16)
-#define STM32H7_BOOST BIT(8)
-#define STM32H7_ADSTP BIT(4)
-#define STM32H7_ADSTART BIT(2)
-#define STM32H7_ADDIS BIT(1)
-#define STM32H7_ADEN BIT(0)
-
-/* STM32H7_ADC_CFGR bit fields */
-#define STM32H7_EXTEN_SHIFT 10
-#define STM32H7_EXTEN_MASK GENMASK(11, 10)
-#define STM32H7_EXTSEL_SHIFT 5
-#define STM32H7_EXTSEL_MASK GENMASK(9, 5)
-#define STM32H7_RES_SHIFT 2
-#define STM32H7_RES_MASK GENMASK(4, 2)
-#define STM32H7_DMNGT_SHIFT 0
-#define STM32H7_DMNGT_MASK GENMASK(1, 0)
-
-enum stm32h7_adc_dmngt {
- STM32H7_DMNGT_DR_ONLY, /* Regular data in DR only */
- STM32H7_DMNGT_DMA_ONESHOT, /* DMA one shot mode */
- STM32H7_DMNGT_DFSDM, /* DFSDM mode */
- STM32H7_DMNGT_DMA_CIRC, /* DMA circular mode */
-};
-
-/* STM32H7_ADC_CALFACT - bit fields */
-#define STM32H7_CALFACT_D_SHIFT 16
-#define STM32H7_CALFACT_D_MASK GENMASK(26, 16)
-#define STM32H7_CALFACT_S_SHIFT 0
-#define STM32H7_CALFACT_S_MASK GENMASK(10, 0)
-
-/* STM32H7_ADC_CALFACT2 - bit fields */
-#define STM32H7_LINCALFACT_SHIFT 0
-#define STM32H7_LINCALFACT_MASK GENMASK(29, 0)
-
/* Number of linear calibration shadow registers / LINCALRDYW control bits */
#define STM32H7_LINCALFACT_NUM 6
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
index 9ac8356d9a954b0189dbdf38627c8b48d086d9a6..4998a89d083d54d4b6dafd2ccb9b3d825d2447e9 100644
--- a/drivers/iio/imu/adis_buffer.c
+++ b/drivers/iio/imu/adis_buffer.c
@@ -35,8 +35,11 @@ static int adis_update_scan_mode_burst(struct iio_dev *indio_dev,
return -ENOMEM;
adis->buffer = kzalloc(burst_length + sizeof(u16), GFP_KERNEL);
- if (!adis->buffer)
+ if (!adis->buffer) {
+ kfree(adis->xfer);
+ adis->xfer = NULL;
return -ENOMEM;
+ }
tx = adis->buffer + burst_length;
tx[0] = ADIS_READ_REG(adis->burst->reg_cmd);
@@ -78,8 +81,11 @@ int adis_update_scan_mode(struct iio_dev *indio_dev,
return -ENOMEM;
adis->buffer = kcalloc(indio_dev->scan_bytes, 2, GFP_KERNEL);
- if (!adis->buffer)
+ if (!adis->buffer) {
+ kfree(adis->xfer);
+ adis->xfer = NULL;
return -ENOMEM;
+ }
rx = adis->buffer;
tx = rx + scan_count;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 80e42c7dbcbe63039f4d23ed363799c75a1d9698..0fe6999b825714c5725d9a3cea3769a8a11e5b05 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -99,7 +99,9 @@ struct st_lsm6dsx_fs {
#define ST_LSM6DSX_FS_LIST_SIZE 4
struct st_lsm6dsx_fs_table_entry {
struct st_lsm6dsx_reg reg;
+
struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE];
+ int fs_len;
};
/**
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 2d34955601368870cb8ee931600a67146c5bb3e7..fd5ebe1e1594f3a396e858026f2baa3b55808aa3 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -145,6 +145,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
.fs_avl[3] = { IIO_G_TO_M_S_2(732), 0x1 },
+ .fs_len = 4,
},
[ST_LSM6DSX_ID_GYRO] = {
.reg = {
@@ -154,6 +155,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[0] = { IIO_DEGREE_TO_RAD(245), 0x0 },
.fs_avl[1] = { IIO_DEGREE_TO_RAD(500), 0x1 },
.fs_avl[2] = { IIO_DEGREE_TO_RAD(2000), 0x3 },
+ .fs_len = 3,
},
},
},
@@ -215,6 +217,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+ .fs_len = 4,
},
[ST_LSM6DSX_ID_GYRO] = {
.reg = {
@@ -225,6 +228,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+ .fs_len = 4,
},
},
.decimator = {
@@ -327,6 +331,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+ .fs_len = 4,
},
[ST_LSM6DSX_ID_GYRO] = {
.reg = {
@@ -337,6 +342,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+ .fs_len = 4,
},
},
.decimator = {
@@ -448,6 +454,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+ .fs_len = 4,
},
[ST_LSM6DSX_ID_GYRO] = {
.reg = {
@@ -458,6 +465,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+ .fs_len = 4,
},
},
.decimator = {
@@ -563,6 +571,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+ .fs_len = 4,
},
[ST_LSM6DSX_ID_GYRO] = {
.reg = {
@@ -573,6 +582,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+ .fs_len = 4,
},
},
.batch = {
@@ -693,6 +703,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+ .fs_len = 4,
},
[ST_LSM6DSX_ID_GYRO] = {
.reg = {
@@ -703,6 +714,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+ .fs_len = 4,
},
},
.batch = {
@@ -800,6 +812,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+ .fs_len = 4,
},
[ST_LSM6DSX_ID_GYRO] = {
.reg = {
@@ -810,6 +823,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+ .fs_len = 4,
},
},
.batch = {
@@ -933,11 +947,12 @@ static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor,
int i, err;
fs_table = &sensor->hw->settings->fs_table[sensor->id];
- for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++)
+ for (i = 0; i < fs_table->fs_len; i++) {
if (fs_table->fs_avl[i].gain == gain)
break;
+ }
- if (i == ST_LSM6DSX_FS_LIST_SIZE)
+ if (i == fs_table->fs_len)
return -EINVAL;
data = ST_LSM6DSX_SHIFT_VAL(fs_table->fs_avl[i].val,
@@ -1196,18 +1211,13 @@ static ssize_t st_lsm6dsx_sysfs_scale_avail(struct device *dev,
{
struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
const struct st_lsm6dsx_fs_table_entry *fs_table;
- enum st_lsm6dsx_sensor_id id = sensor->id;
struct st_lsm6dsx_hw *hw = sensor->hw;
int i, len = 0;
- fs_table = &hw->settings->fs_table[id];
- for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) {
- if (!fs_table->fs_avl[i].gain)
- break;
-
+ fs_table = &hw->settings->fs_table[sensor->id];
+ for (i = 0; i < fs_table->fs_len; i++)
len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
fs_table->fs_avl[i].gain);
- }
buf[len - 1] = '\n';
return len;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
index 66fbcd94642d42237476d537e2c5e563556be004..ea472cf6db7ba53ff180c01e338790764c70c91a 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -61,6 +61,7 @@ static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
.gain = 1500,
.val = 0x0,
}, /* 1500 uG/LSB */
+ .fs_len = 1,
},
.temp_comp = {
.addr = 0x60,
@@ -92,9 +93,11 @@ static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
{
struct st_lsm6dsx_sensor *sensor;
+ u16 odr;
sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
- msleep((2000U / sensor->odr) + 1);
+ odr = (hw->enable_mask & BIT(ST_LSM6DSX_ID_ACC)) ? sensor->odr : 13;
+ msleep((2000U / odr) + 1);
}
/**
@@ -555,13 +558,9 @@ static ssize_t st_lsm6dsx_shub_scale_avail(struct device *dev,
int i, len = 0;
settings = sensor->ext_info.settings;
- for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) {
- u16 val = settings->fs_table.fs_avl[i].gain;
-
- if (val > 0)
- len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
- val);
- }
+ for (i = 0; i < settings->fs_table.fs_len; i++)
+ len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
+ settings->fs_table.fs_avl[i].gain);
buf[len - 1] = '\n';
return len;
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 08d7e1ef21861b56ff3415b86da7ab762f42dd1e..4a1a883dc0612b7c18493e7d79dcb2759c2155d2 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -314,6 +314,7 @@ config MAX44009
config NOA1305
tristate "ON Semiconductor NOA1305 ambient light sensor"
depends on I2C
+ select REGMAP_I2C
help
Say Y here if you want to build support for the ON Semiconductor
NOA1305 ambient light sensor.
diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index e666879007d2c9180bfb076dee01e36cd58b9329..92004a2563ea80b910733b657bf10b9be206537f 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -686,6 +686,7 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
struct iio_dev *iio = _iio;
struct opt3001 *opt = iio_priv(iio);
int ret;
+ bool wake_result_ready_queue = false;
if (!opt->ok_to_ignore_lock)
mutex_lock(&opt->lock);
@@ -720,13 +721,16 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
}
opt->result = ret;
opt->result_ready = true;
- wake_up(&opt->result_ready_queue);
+ wake_result_ready_queue = true;
}
out:
if (!opt->ok_to_ignore_lock)
mutex_unlock(&opt->lock);
+ if (wake_result_ready_queue)
+ wake_up(&opt->result_ready_queue);
+
return IRQ_HANDLED;
}
diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 51421ac3251771b3f46ebdd1af3c06967f26cc81..16dacea9eadfa540afd57c7889339fc03384f639 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -398,19 +398,23 @@ static int vcnl4000_probe(struct i2c_client *client,
static const struct of_device_id vcnl_4000_of_match[] = {
{
.compatible = "vishay,vcnl4000",
- .data = "VCNL4000",
+ .data = (void *)VCNL4000,
},
{
.compatible = "vishay,vcnl4010",
- .data = "VCNL4010",
+ .data = (void *)VCNL4010,
},
{
- .compatible = "vishay,vcnl4010",
- .data = "VCNL4020",
+ .compatible = "vishay,vcnl4020",
+ .data = (void *)VCNL4010,
+ },
+ {
+ .compatible = "vishay,vcnl4040",
+ .data = (void *)VCNL4040,
},
{
.compatible = "vishay,vcnl4200",
- .data = "VCNL4200",
+ .data = (void *)VCNL4200,
},
{},
};
diff --git a/drivers/staging/exfat/Kconfig b/drivers/staging/exfat/Kconfig
index 290dbfc7ace1a03d76ac866117c578b90d5261a7..ce32dfe33becdd7f2ab890d9814de09255ff1216 100644
--- a/drivers/staging/exfat/Kconfig
+++ b/drivers/staging/exfat/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
config EXFAT_FS
tristate "exFAT fs support"
depends on BLOCK
@@ -6,7 +7,7 @@ config EXFAT_FS
This adds support for the exFAT file system.
config EXFAT_DONT_MOUNT_VFAT
- bool "Prohibit mounting of fat/vfat filesysems by exFAT"
+ bool "Prohibit mounting of fat/vfat filesystems by exFAT"
depends on EXFAT_FS
default y
help
diff --git a/drivers/staging/exfat/Makefile b/drivers/staging/exfat/Makefile
index 84944dfbae28d4f61c7478f19bc82d9466196e6f..6c90aec83febfd538f69d66d8cd77a0ab120f011 100644
--- a/drivers/staging/exfat/Makefile
+++ b/drivers/staging/exfat/Makefile
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: GPL-2.0-or-later
obj-$(CONFIG_EXFAT_FS) += exfat.o
diff --git a/drivers/staging/exfat/exfat.h b/drivers/staging/exfat/exfat.h
index 6c12f2d79f4d310c0e09a386e7f0fa9423d9e0a0..3abab33e932c0c48b08d9f27f1f7a780c2457faf 100644
--- a/drivers/staging/exfat/exfat.h
+++ b/drivers/staging/exfat/exfat.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
*/
diff --git a/drivers/staging/exfat/exfat_blkdev.c b/drivers/staging/exfat/exfat_blkdev.c
index f086c75e7076fb1c1c0a65dad778d558a67368ba..81d20e6241c65619dda4900ac7a9f3ce5ff6bdf1 100644
--- a/drivers/staging/exfat/exfat_blkdev.c
+++ b/drivers/staging/exfat/exfat_blkdev.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
*/
diff --git a/drivers/staging/exfat/exfat_cache.c b/drivers/staging/exfat/exfat_cache.c
index 1565ce65d39f42bbedd341cc184c2ba2cd8828ef..e1b001718709088d62fcaaaad78c17ca214bd690 100644
--- a/drivers/staging/exfat/exfat_cache.c
+++ b/drivers/staging/exfat/exfat_cache.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
*/
diff --git a/drivers/staging/exfat/exfat_core.c b/drivers/staging/exfat/exfat_core.c
index b3e9cf725cf57c28579599bea45e75909fba8661..79174e5c4145f397f18e781b51fe6378727859a3 100644
--- a/drivers/staging/exfat/exfat_core.c
+++ b/drivers/staging/exfat/exfat_core.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
*/
diff --git a/drivers/staging/exfat/exfat_nls.c b/drivers/staging/exfat/exfat_nls.c
index 03cb8290b5d261d5c8df5a1a61c511f3f20df905..a5c4b68925fba64299c9f7d6455d951cb1beca1a 100644
--- a/drivers/staging/exfat/exfat_nls.c
+++ b/drivers/staging/exfat/exfat_nls.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
*/
diff --git a/drivers/staging/exfat/exfat_super.c b/drivers/staging/exfat/exfat_super.c
index 5f6caee819a6b26d2397e54645fa16144b749f26..3b2b0ceb7297a0bcd932306d64f2189de486eaef 100644
--- a/drivers/staging/exfat/exfat_super.c
+++ b/drivers/staging/exfat/exfat_super.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
*/
@@ -7,6 +7,7 @@
#include <linux/init.h>
#include <linux/time.h>
#include <linux/slab.h>
+#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/pagemap.h>
#include <linux/mpage.h>
@@ -3450,7 +3451,7 @@ static void exfat_free_super(struct exfat_sb_info *sbi)
kfree(sbi->options.iocharset);
/* mutex_init is in exfat_fill_super function. only for 3.7+ */
mutex_destroy(&sbi->s_lock);
- kfree(sbi);
+ kvfree(sbi);
}
static void exfat_put_super(struct super_block *sb)
@@ -3845,7 +3846,7 @@ static int exfat_fill_super(struct super_block *sb, void *data, int silent)
* the filesystem, since we're only just about to mount
* it and have no inodes etc active!
*/
- sbi = kzalloc(sizeof(struct exfat_sb_info), GFP_KERNEL);
+ sbi = kvzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
mutex_init(&sbi->s_lock);
diff --git a/drivers/staging/exfat/exfat_upcase.c b/drivers/staging/exfat/exfat_upcase.c
index 366082fb3dabc8c1ff5263fd246275921a7f8a74..b91a1faa0e503ada734fd51c50ece4be4c611a73 100644
--- a/drivers/staging/exfat/exfat_upcase.c
+++ b/drivers/staging/exfat/exfat_upcase.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2012-2013 Samsung Electronics Co., Ltd.
*/
diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig
index 8ec524a95ec8f6f2ec7c227408c4e0e1eef5074a..cb61c2a772bdd8dc0240cb59d634842ad87d3a20 100644
--- a/drivers/staging/fbtft/Kconfig
+++ b/drivers/staging/fbtft/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
menuconfig FB_TFT
tristate "Support for small TFT LCD display modules"
- depends on FB && SPI
+ depends on FB && SPI && OF
depends on GPIOLIB || COMPILE_TEST
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
@@ -199,13 +199,3 @@ config FB_TFT_WATTEROTT
depends on FB_TFT
help
Generic Framebuffer support for WATTEROTT
-
-config FB_FLEX
- tristate "Generic FB driver for TFT LCD displays"
- depends on FB_TFT
- help
- Generic Framebuffer support for TFT LCD displays.
-
-config FB_TFT_FBTFT_DEVICE
- tristate "Module to for adding FBTFT devices"
- depends on FB_TFT
diff --git a/drivers/staging/fbtft/Makefile b/drivers/staging/fbtft/Makefile
index 6bc03311c9c7e63d929dc5a287f9c7bee89d2737..27af43f32f81e198bc24e108c30c45b451909d28 100644
--- a/drivers/staging/fbtft/Makefile
+++ b/drivers/staging/fbtft/Makefile
@@ -36,7 +36,3 @@ obj-$(CONFIG_FB_TFT_UC1611) += fb_uc1611.o
obj-$(CONFIG_FB_TFT_UC1701) += fb_uc1701.o
obj-$(CONFIG_FB_TFT_UPD161704) += fb_upd161704.o
obj-$(CONFIG_FB_TFT_WATTEROTT) += fb_watterott.o
-obj-$(CONFIG_FB_FLEX) += flexfb.o
-
-# Device modules
-obj-$(CONFIG_FB_TFT_FBTFT_DEVICE) += fbtft_device.o
diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index cf5700a2ea6688d6e73e07151fe40b5d4e6af7e8..a0a67aa517f0e483ce3e75745c11c75ecb5c1d3a 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -714,7 +714,7 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
if (par->gamma.curves && gamma) {
if (fbtft_gamma_parse_str(par, par->gamma.curves, gamma,
strlen(gamma)))
- goto alloc_fail;
+ goto release_framebuf;
}
/* Transmit buffer */
@@ -731,7 +731,7 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
if (txbuflen > 0) {
txbuf = devm_kzalloc(par->info->device, txbuflen, GFP_KERNEL);
if (!txbuf)
- goto alloc_fail;
+ goto release_framebuf;
par->txbuf.buf = txbuf;
par->txbuf.len = txbuflen;
}
@@ -753,6 +753,9 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
return info;
+release_framebuf:
+ framebuffer_release(info);
+
alloc_fail:
vfree(vmem);
diff --git a/drivers/staging/fbtft/fbtft_device.c b/drivers/staging/fbtft/fbtft_device.c
deleted file mode 100644
index 44e1410eb3fea46830585c0c545e956504bb25f4..0000000000000000000000000000000000000000
--- a/drivers/staging/fbtft/fbtft_device.c
+++ /dev/null
@@ -1,1261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * Copyright (C) 2013, Noralf Tronnes
- */
-
-#define pr_fmt(fmt) "fbtft_device: " fmt
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio/consumer.h>
-#include <linux/spi/spi.h>
-#include <video/mipi_display.h>
-
-#include "fbtft.h"
-
-#define MAX_GPIOS 32
-
-static struct spi_device *spi_device;
-static struct platform_device *p_device;
-
-static char *name;
-module_param(name, charp, 0000);
-MODULE_PARM_DESC(name,
- "Devicename (required). name=list => list all supported devices.");
-
-static unsigned int rotate;
-module_param(rotate, uint, 0000);
-MODULE_PARM_DESC(rotate,
- "Angle to rotate display counter clockwise: 0, 90, 180, 270");
-
-static unsigned int busnum;
-module_param(busnum, uint, 0000);
-MODULE_PARM_DESC(busnum, "SPI bus number (default=0)");
-
-static unsigned int cs;
-module_param(cs, uint, 0000);
-MODULE_PARM_DESC(cs, "SPI chip select (default=0)");
-
-static unsigned int speed;
-module_param(speed, uint, 0000);
-MODULE_PARM_DESC(speed, "SPI speed (override device default)");
-
-static int mode = -1;
-module_param(mode, int, 0000);
-MODULE_PARM_DESC(mode, "SPI mode (override device default)");
-
-static unsigned int fps;
-module_param(fps, uint, 0000);
-MODULE_PARM_DESC(fps, "Frames per second (override driver default)");
-
-static char *gamma;
-module_param(gamma, charp, 0000);
-MODULE_PARM_DESC(gamma,
- "String representation of Gamma Curve(s). Driver specific.");
-
-static int txbuflen;
-module_param(txbuflen, int, 0000);
-MODULE_PARM_DESC(txbuflen, "txbuflen (override driver default)");
-
-static int bgr = -1;
-module_param(bgr, int, 0000);
-MODULE_PARM_DESC(bgr,
- "BGR bit (supported by some drivers).");
-
-static unsigned int startbyte;
-module_param(startbyte, uint, 0000);
-MODULE_PARM_DESC(startbyte, "Sets the Start byte used by some SPI displays.");
-
-static bool custom;
-module_param(custom, bool, 0000);
-MODULE_PARM_DESC(custom, "Add a custom display device. Use speed= argument to make it a SPI device, else platform_device");
-
-static unsigned int width;
-module_param(width, uint, 0000);
-MODULE_PARM_DESC(width, "Display width, used with the custom argument");
-
-static unsigned int height;
-module_param(height, uint, 0000);
-MODULE_PARM_DESC(height, "Display height, used with the custom argument");
-
-static unsigned int buswidth = 8;
-module_param(buswidth, uint, 0000);
-MODULE_PARM_DESC(buswidth, "Display bus width, used with the custom argument");
-
-static s16 init[FBTFT_MAX_INIT_SEQUENCE];
-static int init_num;
-module_param_array(init, short, &init_num, 0000);
-MODULE_PARM_DESC(init, "Init sequence, used with the custom argument");
-
-static unsigned long debug;
-module_param(debug, ulong, 0000);
-MODULE_PARM_DESC(debug,
- "level: 0-7 (the remaining 29 bits is for advanced usage)");
-
-static unsigned int verbose = 3;
-module_param(verbose, uint, 0000);
-MODULE_PARM_DESC(verbose,
- "0 silent, >1 show devices, >2 show devices before (default=3)");
-
-struct fbtft_device_display {
- char *name;
- struct spi_board_info *spi;
- struct platform_device *pdev;
-};
-
-static void fbtft_device_pdev_release(struct device *dev);
-
-static int write_gpio16_wr_slow(struct fbtft_par *par, void *buf, size_t len);
-static void adafruit18_green_tab_set_addr_win(struct fbtft_par *par,
- int xs, int ys, int xe, int ye);
-
-#define ADAFRUIT18_GAMMA \
- "02 1c 07 12 37 32 29 2d 29 25 2B 39 00 01 03 10\n" \
- "03 1d 07 06 2E 2C 29 2D 2E 2E 37 3F 00 00 02 10"
-
-#define CBERRY28_GAMMA \
- "D0 00 14 15 13 2C 42 43 4E 09 16 14 18 21\n" \
- "D0 00 14 15 13 0B 43 55 53 0C 17 14 23 20"
-
-static const s16 cberry28_init_sequence[] = {
- /* turn off sleep mode */
- -1, MIPI_DCS_EXIT_SLEEP_MODE,
- -2, 120,
-
- /* set pixel format to RGB-565 */
- -1, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT,
-
- -1, 0xB2, 0x0C, 0x0C, 0x00, 0x33, 0x33,
-
- /*
- * VGH = 13.26V
- * VGL = -10.43V
- */
- -1, 0xB7, 0x35,
-
- /*
- * VDV and VRH register values come from command write
- * (instead of NVM)
- */
- -1, 0xC2, 0x01, 0xFF,
-
- /*
- * VAP = 4.7V + (VCOM + VCOM offset + 0.5 * VDV)
- * VAN = -4.7V + (VCOM + VCOM offset + 0.5 * VDV)
- */
- -1, 0xC3, 0x17,
-
- /* VDV = 0V */
- -1, 0xC4, 0x20,
-
- /* VCOM = 0.675V */
- -1, 0xBB, 0x17,
-
- /* VCOM offset = 0V */
- -1, 0xC5, 0x20,
-
- /*
- * AVDD = 6.8V
- * AVCL = -4.8V
- * VDS = 2.3V
- */
- -1, 0xD0, 0xA4, 0xA1,
-
- -1, MIPI_DCS_SET_DISPLAY_ON,
-
- -3,
-};
-
-static const s16 hy28b_init_sequence[] = {
- -1, 0x00e7, 0x0010, -1, 0x0000, 0x0001,
- -1, 0x0001, 0x0100, -1, 0x0002, 0x0700,
- -1, 0x0003, 0x1030, -1, 0x0004, 0x0000,
- -1, 0x0008, 0x0207, -1, 0x0009, 0x0000,
- -1, 0x000a, 0x0000, -1, 0x000c, 0x0001,
- -1, 0x000d, 0x0000, -1, 0x000f, 0x0000,
- -1, 0x0010, 0x0000, -1, 0x0011, 0x0007,
- -1, 0x0012, 0x0000, -1, 0x0013, 0x0000,
- -2, 50, -1, 0x0010, 0x1590, -1, 0x0011,
- 0x0227, -2, 50, -1, 0x0012, 0x009c, -2, 50,
- -1, 0x0013, 0x1900, -1, 0x0029, 0x0023,
- -1, 0x002b, 0x000e, -2, 50,
- -1, 0x0020, 0x0000, -1, 0x0021, 0x0000,
- -2, 50, -1, 0x0050, 0x0000,
- -1, 0x0051, 0x00ef, -1, 0x0052, 0x0000,
- -1, 0x0053, 0x013f, -1, 0x0060, 0xa700,
- -1, 0x0061, 0x0001, -1, 0x006a, 0x0000,
- -1, 0x0080, 0x0000, -1, 0x0081, 0x0000,
- -1, 0x0082, 0x0000, -1, 0x0083, 0x0000,
- -1, 0x0084, 0x0000, -1, 0x0085, 0x0000,
- -1, 0x0090, 0x0010, -1, 0x0092, 0x0000,
- -1, 0x0093, 0x0003, -1, 0x0095, 0x0110,
- -1, 0x0097, 0x0000, -1, 0x0098, 0x0000,
- -1, 0x0007, 0x0133, -1, 0x0020, 0x0000,
- -1, 0x0021, 0x0000, -2, 100, -3 };
-
-#define HY28B_GAMMA \
- "04 1F 4 7 7 0 7 7 6 0\n" \
- "0F 00 1 7 4 0 0 0 6 7"
-
-static const s16 pitft_init_sequence[] = {
- -1, MIPI_DCS_SOFT_RESET,
- -2, 5,
- -1, MIPI_DCS_SET_DISPLAY_OFF,
- -1, 0xEF, 0x03, 0x80, 0x02,
- -1, 0xCF, 0x00, 0xC1, 0x30,
- -1, 0xED, 0x64, 0x03, 0x12, 0x81,
- -1, 0xE8, 0x85, 0x00, 0x78,
- -1, 0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02,
- -1, 0xF7, 0x20,
- -1, 0xEA, 0x00, 0x00,
- -1, 0xC0, 0x23,
- -1, 0xC1, 0x10,
- -1, 0xC5, 0x3E, 0x28,
- -1, 0xC7, 0x86,
- -1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55,
- -1, 0xB1, 0x00, 0x18,
- -1, 0xB6, 0x08, 0x82, 0x27,
- -1, 0xF2, 0x00,
- -1, MIPI_DCS_SET_GAMMA_CURVE, 0x01,
- -1, 0xE0, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E,
- 0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
- -1, 0xE1, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31,
- 0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
- -1, MIPI_DCS_EXIT_SLEEP_MODE,
- -2, 100,
- -1, MIPI_DCS_SET_DISPLAY_ON,
- -2, 20,
- -3
-};
-
-static const s16 waveshare32b_init_sequence[] = {
- -1, 0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02,
- -1, 0xCF, 0x00, 0xC1, 0x30,
- -1, 0xE8, 0x85, 0x00, 0x78,
- -1, 0xEA, 0x00, 0x00,
- -1, 0xED, 0x64, 0x03, 0x12, 0x81,
- -1, 0xF7, 0x20,
- -1, 0xC0, 0x23,
- -1, 0xC1, 0x10,
- -1, 0xC5, 0x3E, 0x28,
- -1, 0xC7, 0x86,
- -1, MIPI_DCS_SET_ADDRESS_MODE, 0x28,
- -1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55,
- -1, 0xB1, 0x00, 0x18,
- -1, 0xB6, 0x08, 0x82, 0x27,
- -1, 0xF2, 0x00,
- -1, MIPI_DCS_SET_GAMMA_CURVE, 0x01,
- -1, 0xE0, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E,
- 0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
- -1, 0xE1, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31,
- 0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
- -1, MIPI_DCS_EXIT_SLEEP_MODE,
- -2, 120,
- -1, MIPI_DCS_SET_DISPLAY_ON,
- -1, MIPI_DCS_WRITE_MEMORY_START,
- -3
-};
-
-#define PIOLED_GAMMA "0 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 " \
- "2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 " \
- "3 3 3 4 4 4 4 4 4 4 4 4 4 4 4"
-
-/* Supported displays in alphabetical order */
-static struct fbtft_device_display displays[] = {
- {
- .name = "adafruit18",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_st7735r",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .gamma = ADAFRUIT18_GAMMA,
- }
- }
- }, {
- .name = "adafruit18_green",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_st7735r",
- .max_speed_hz = 4000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- .fbtftops.set_addr_win =
- adafruit18_green_tab_set_addr_win,
- },
- .bgr = true,
- .gamma = ADAFRUIT18_GAMMA,
- }
- }
- }, {
- .name = "adafruit22",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_hx8340bn",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 9,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "adafruit22a",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9340",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "adafruit28",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9341",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "adafruit13m",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ssd1306",
- .max_speed_hz = 16000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- },
- }
- }
- }, {
- .name = "admatec_c-berry28",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_st7789v",
- .max_speed_hz = 48000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- .init_sequence = cberry28_init_sequence,
- },
- .gamma = CBERRY28_GAMMA,
- }
- }
- }, {
- .name = "agm1264k-fl",
- .pdev = &(struct platform_device) {
- .name = "fb_agm1264k-fl",
- .id = 0,
- .dev = {
- .release = fbtft_device_pdev_release,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = FBTFT_ONBOARD_BACKLIGHT,
- },
- },
- }
- }
- }, {
- .name = "dogs102",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_uc1701",
- .max_speed_hz = 8000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "er_tftm050_2",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ra8875",
- .max_speed_hz = 5000000,
- .mode = SPI_MODE_3,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- .width = 480,
- .height = 272,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "er_tftm070_5",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ra8875",
- .max_speed_hz = 5000000,
- .mode = SPI_MODE_3,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- .width = 800,
- .height = 480,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "ew24ha0",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_uc1611",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_3,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- },
- }
- }
- }, {
- .name = "ew24ha0_9bit",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_uc1611",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_3,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 9,
- },
- }
- }
- }, {
- .name = "flexfb",
- .spi = &(struct spi_board_info) {
- .modalias = "flexfb",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- }
- }, {
- .name = "flexpfb",
- .pdev = &(struct platform_device) {
- .name = "flexpfb",
- .id = 0,
- .dev = {
- .release = fbtft_device_pdev_release,
- }
- }
- }, {
- .name = "freetronicsoled128",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ssd1351",
- .max_speed_hz = 20000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = FBTFT_ONBOARD_BACKLIGHT,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "hx8353d",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_hx8353d",
- .max_speed_hz = 16000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- }
- }
- }, {
- .name = "hy28a",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9320",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_3,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .startbyte = 0x70,
- .bgr = true,
- }
- }
- }, {
- .name = "hy28b",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9325",
- .max_speed_hz = 48000000,
- .mode = SPI_MODE_3,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- .init_sequence = hy28b_init_sequence,
- },
- .startbyte = 0x70,
- .bgr = true,
- .fps = 50,
- .gamma = HY28B_GAMMA,
- }
- }
- }, {
- .name = "ili9481",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9481",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .regwidth = 16,
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "itdb24",
- .pdev = &(struct platform_device) {
- .name = "fb_s6d1121",
- .id = 0,
- .dev = {
- .release = fbtft_device_pdev_release,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = false,
- },
- }
- }
- }, {
- .name = "itdb28",
- .pdev = &(struct platform_device) {
- .name = "fb_ili9325",
- .id = 0,
- .dev = {
- .release = fbtft_device_pdev_release,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- },
- }
- }
- }, {
- .name = "itdb28_spi",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9325",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "mi0283qt-2",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_hx8347d",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .startbyte = 0x70,
- .bgr = true,
- }
- }
- }, {
- .name = "mi0283qt-9a",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9341",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 9,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "mi0283qt-v2",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_watterott",
- .max_speed_hz = 4000000,
- .mode = SPI_MODE_3,
- .platform_data = &(struct fbtft_platform_data) {
- }
- }
- }, {
- .name = "nokia3310",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_pcd8544",
- .max_speed_hz = 400000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- },
- }
- }
- }, {
- .name = "nokia3310a",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_tls8204",
- .max_speed_hz = 1000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- },
- }
- }
- }, {
- .name = "nokia5110",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9163",
- .max_speed_hz = 12000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "piscreen",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9486",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .regwidth = 16,
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "pitft",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9340",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .chip_select = 0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- .init_sequence = pitft_init_sequence,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "pioled",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ssd1351",
- .max_speed_hz = 20000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- },
- .bgr = true,
- .gamma = PIOLED_GAMMA
- }
- }
- }, {
- .name = "rpi-display",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9341",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "s6d02a1",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_s6d02a1",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "sainsmart18",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_st7735r",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- },
- }
- }
- }, {
- .name = "sainsmart32",
- .pdev = &(struct platform_device) {
- .name = "fb_ssd1289",
- .id = 0,
- .dev = {
- .release = fbtft_device_pdev_release,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 16,
- .txbuflen = -2, /* disable buffer */
- .backlight = 1,
- .fbtftops.write = write_gpio16_wr_slow,
- },
- .bgr = true,
- },
- },
- }
- }, {
- .name = "sainsmart32_fast",
- .pdev = &(struct platform_device) {
- .name = "fb_ssd1289",
- .id = 0,
- .dev = {
- .release = fbtft_device_pdev_release,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 16,
- .txbuflen = -2, /* disable buffer */
- .backlight = 1,
- },
- .bgr = true,
- },
- },
- }
- }, {
- .name = "sainsmart32_latched",
- .pdev = &(struct platform_device) {
- .name = "fb_ssd1289",
- .id = 0,
- .dev = {
- .release = fbtft_device_pdev_release,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 16,
- .txbuflen = -2, /* disable buffer */
- .backlight = 1,
- .fbtftops.write =
- fbtft_write_gpio16_wr_latched,
- },
- .bgr = true,
- },
- },
- }
- }, {
- .name = "sainsmart32_spi",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ssd1289",
- .max_speed_hz = 16000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "spidev",
- .spi = &(struct spi_board_info) {
- .modalias = "spidev",
- .max_speed_hz = 500000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- }
- }
- }, {
- .name = "ssd1331",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ssd1331",
- .max_speed_hz = 20000000,
- .mode = SPI_MODE_3,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- },
- }
- }
- }, {
- .name = "tinylcd35",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_tinylcd",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "tm022hdh26",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9341",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "tontec35_9481", /* boards before 02 July 2014 */
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9481",
- .max_speed_hz = 128000000,
- .mode = SPI_MODE_3,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "tontec35_9486", /* boards after 02 July 2014 */
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9486",
- .max_speed_hz = 128000000,
- .mode = SPI_MODE_3,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "upd161704",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_upd161704",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- },
- }
- }
- }, {
- .name = "waveshare32b",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_ili9340",
- .max_speed_hz = 48000000,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- .backlight = 1,
- .init_sequence =
- waveshare32b_init_sequence,
- },
- .bgr = true,
- }
- }
- }, {
- .name = "waveshare22",
- .spi = &(struct spi_board_info) {
- .modalias = "fb_bd663474",
- .max_speed_hz = 32000000,
- .mode = SPI_MODE_3,
- .platform_data = &(struct fbtft_platform_data) {
- .display = {
- .buswidth = 8,
- },
- }
- }
- }, {
- /* This should be the last item.
- * Used with the custom argument
- */
- .name = "",
- .spi = &(struct spi_board_info) {
- .modalias = "",
- .max_speed_hz = 0,
- .mode = SPI_MODE_0,
- .platform_data = &(struct fbtft_platform_data) {
- }
- },
- .pdev = &(struct platform_device) {
- .name = "",
- .id = 0,
- .dev = {
- .release = fbtft_device_pdev_release,
- .platform_data = &(struct fbtft_platform_data) {
- },
- },
- },
- }
-};
-
-static int write_gpio16_wr_slow(struct fbtft_par *par, void *buf, size_t len)
-{
- u16 data;
- int i;
-#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
- static u16 prev_data;
-#endif
-
- fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
- "%s(len=%zu): ", __func__, len);
-
- while (len) {
- data = *(u16 *)buf;
-
- /* Start writing by pulling down /WR */
- gpiod_set_value(par->gpio.wr, 0);
-
- /* Set data */
-#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
- if (data == prev_data) {
- gpiod_set_value(par->gpio.wr, 0); /* used as delay */
- } else {
- for (i = 0; i < 16; i++) {
- if ((data & 1) != (prev_data & 1))
- gpiod_set_value(par->gpio.db[i],
- data & 1);
- data >>= 1;
- prev_data >>= 1;
- }
- }
-#else
- for (i = 0; i < 16; i++) {
- gpiod_set_value(par->gpio.db[i], data & 1);
- data >>= 1;
- }
-#endif
-
- /* Pullup /WR */
- gpiod_set_value(par->gpio.wr, 1);
-
-#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
- prev_data = *(u16 *)buf;
-#endif
- buf += 2;
- len -= 2;
- }
-
- return 0;
-}
-
-static void adafruit18_green_tab_set_addr_win(struct fbtft_par *par,
- int xs, int ys, int xe, int ye)
-{
- write_reg(par, 0x2A, 0, xs + 2, 0, xe + 2);
- write_reg(par, 0x2B, 0, ys + 1, 0, ye + 1);
- write_reg(par, 0x2C);
-}
-
-static void fbtft_device_pdev_release(struct device *dev)
-{
-/* Needed to silence this message:
- * Device 'xxx' does not have a release() function,
- * it is broken and must be fixed
- */
-}
-
-static int spi_device_found(struct device *dev, void *data)
-{
- struct spi_device *spi = to_spi_device(dev);
-
- dev_info(dev, "%s %s %dkHz %d bits mode=0x%02X\n", spi->modalias,
- dev_name(dev), spi->max_speed_hz / 1000, spi->bits_per_word,
- spi->mode);
-
- return 0;
-}
-
-static void pr_spi_devices(void)
-{
- pr_debug("SPI devices registered:\n");
- bus_for_each_dev(&spi_bus_type, NULL, NULL, spi_device_found);
-}
-
-static int p_device_found(struct device *dev, void *data)
-{
- struct platform_device
- *pdev = to_platform_device(dev);
-
- if (strstr(pdev->name, "fb"))
- dev_info(dev, "%s id=%d pdata? %s\n", pdev->name, pdev->id,
- pdev->dev.platform_data ? "yes" : "no");
-
- return 0;
-}
-
-static void pr_p_devices(void)
-{
- pr_debug("'fb' Platform devices registered:\n");
- bus_for_each_dev(&platform_bus_type, NULL, NULL, p_device_found);
-}
-
-#ifdef MODULE
-static void fbtft_device_spi_delete(struct spi_master *master, unsigned int cs)
-{
- struct device *dev;
- char str[32];
-
- snprintf(str, sizeof(str), "%s.%u", dev_name(&master->dev), cs);
-
- dev = bus_find_device_by_name(&spi_bus_type, NULL, str);
- if (dev) {
- if (verbose)
- dev_info(dev, "Deleting %s\n", str);
- device_del(dev);
- }
-}
-
-static int fbtft_device_spi_device_register(struct spi_board_info *spi)
-{
- struct spi_master *master;
-
- master = spi_busnum_to_master(spi->bus_num);
- if (!master) {
- pr_err("spi_busnum_to_master(%d) returned NULL\n",
- spi->bus_num);
- return -EINVAL;
- }
- /* make sure it's available */
- fbtft_device_spi_delete(master, spi->chip_select);
- spi_device = spi_new_device(master, spi);
- put_device(&master->dev);
- if (!spi_device) {
- dev_err(&master->dev, "spi_new_device() returned NULL\n");
- return -EPERM;
- }
- return 0;
-}
-#else
-static int fbtft_device_spi_device_register(struct spi_board_info *spi)
-{
- return spi_register_board_info(spi, 1);
-}
-#endif
-
-static int __init fbtft_device_init(void)
-{
- struct spi_board_info *spi = NULL;
- struct fbtft_platform_data *pdata;
- bool found = false;
- int i = 0;
- int ret = 0;
-
- if (!name) {
-#ifdef MODULE
- pr_err("missing module parameter: 'name'\n");
- return -EINVAL;
-#else
- return 0;
-#endif
- }
-
- if (init_num > FBTFT_MAX_INIT_SEQUENCE) {
- pr_err("init parameter: exceeded max array size: %d\n",
- FBTFT_MAX_INIT_SEQUENCE);
- return -EINVAL;
- }
-
- if (verbose > 2) {
- pr_spi_devices(); /* print list of registered SPI devices */
- pr_p_devices(); /* print list of 'fb' platform devices */
- }
-
- pr_debug("name='%s', busnum=%d, cs=%d\n", name, busnum, cs);
-
- if (rotate > 0 && rotate < 4) {
- rotate = (4 - rotate) * 90;
- pr_warn("argument 'rotate' should be an angle. Values 1-3 is deprecated. Setting it to %d.\n",
- rotate);
- }
- if (rotate != 0 && rotate != 90 && rotate != 180 && rotate != 270) {
- pr_warn("argument 'rotate' illegal value: %d. Setting it to 0.\n",
- rotate);
- rotate = 0;
- }
-
- /* name=list lists all supported displays */
- if (strcmp(name, "list") == 0) {
- pr_info("Supported displays:\n");
-
- for (i = 0; i < ARRAY_SIZE(displays); i++)
- pr_info("%s\n", displays[i].name);
- return -ECANCELED;
- }
-
- if (custom) {
- i = ARRAY_SIZE(displays) - 1;
- displays[i].name = name;
- if (speed == 0) {
- displays[i].pdev->name = name;
- displays[i].spi = NULL;
- } else {
- size_t len;
-
- len = strlcpy(displays[i].spi->modalias, name,
- SPI_NAME_SIZE);
- if (len >= SPI_NAME_SIZE)
- pr_warn("modalias (name) truncated to: %s\n",
- displays[i].spi->modalias);
- displays[i].pdev = NULL;
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(displays); i++) {
- if (strncmp(name, displays[i].name, SPI_NAME_SIZE) == 0) {
- if (displays[i].spi) {
- spi = displays[i].spi;
- spi->chip_select = cs;
- spi->bus_num = busnum;
- if (speed)
- spi->max_speed_hz = speed;
- if (mode != -1)
- spi->mode = mode;
- pdata = (void *)spi->platform_data;
- } else if (displays[i].pdev) {
- p_device = displays[i].pdev;
- pdata = p_device->dev.platform_data;
- } else {
- pr_err("broken displays array\n");
- return -EINVAL;
- }
-
- pdata->rotate = rotate;
- if (bgr == 0)
- pdata->bgr = false;
- else if (bgr == 1)
- pdata->bgr = true;
- if (startbyte)
- pdata->startbyte = startbyte;
- if (gamma)
- pdata->gamma = gamma;
- pdata->display.debug = debug;
- if (fps)
- pdata->fps = fps;
- if (txbuflen)
- pdata->txbuflen = txbuflen;
- if (init_num)
- pdata->display.init_sequence = init;
- if (custom) {
- pdata->display.width = width;
- pdata->display.height = height;
- pdata->display.buswidth = buswidth;
- pdata->display.backlight = 1;
- }
-
- if (displays[i].spi) {
- ret = fbtft_device_spi_device_register(spi);
- if (ret) {
- pr_err("failed to register SPI device\n");
- return ret;
- }
- } else {
- ret = platform_device_register(p_device);
- if (ret < 0) {
- pr_err("platform_device_register() returned %d\n",
- ret);
- return ret;
- }
- }
- found = true;
- break;
- }
- }
-
- if (!found) {
- pr_err("display not supported: '%s'\n", name);
- return -EINVAL;
- }
-
- if (spi_device && (verbose > 1))
- pr_spi_devices();
- if (p_device && (verbose > 1))
- pr_p_devices();
-
- return 0;
-}
-
-static void __exit fbtft_device_exit(void)
-{
- if (spi_device) {
- device_del(&spi_device->dev);
- kfree(spi_device);
- }
-
- if (p_device)
- platform_device_unregister(p_device);
-}
-
-arch_initcall(fbtft_device_init);
-module_exit(fbtft_device_exit);
-
-MODULE_DESCRIPTION("Add a FBTFT device.");
-MODULE_AUTHOR("Noralf Tronnes");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/fbtft/flexfb.c b/drivers/staging/fbtft/flexfb.c
deleted file mode 100644
index 3747321011fa6f8ba259c01a028b5c5bc45baf94..0000000000000000000000000000000000000000
--- a/drivers/staging/fbtft/flexfb.c
+++ /dev/null
@@ -1,851 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Generic FB driver for TFT LCD displays
- *
- * Copyright (C) 2013 Noralf Tronnes
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/gpio/consumer.h>
-#include <linux/spi/spi.h>
-#include <linux/delay.h>
-
-#include "fbtft.h"
-
-#define DRVNAME "flexfb"
-
-static char *chip;
-module_param(chip, charp, 0000);
-MODULE_PARM_DESC(chip, "LCD controller");
-
-static unsigned int width;
-module_param(width, uint, 0000);
-MODULE_PARM_DESC(width, "Display width");
-
-static unsigned int height;
-module_param(height, uint, 0000);
-MODULE_PARM_DESC(height, "Display height");
-
-static s16 init[512];
-static int init_num;
-module_param_array(init, short, &init_num, 0000);
-MODULE_PARM_DESC(init, "Init sequence");
-
-static unsigned int setaddrwin;
-module_param(setaddrwin, uint, 0000);
-MODULE_PARM_DESC(setaddrwin, "Which set_addr_win() implementation to use");
-
-static unsigned int buswidth = 8;
-module_param(buswidth, uint, 0000);
-MODULE_PARM_DESC(buswidth, "Width of databus (default: 8)");
-
-static unsigned int regwidth = 8;
-module_param(regwidth, uint, 0000);
-MODULE_PARM_DESC(regwidth, "Width of controller register (default: 8)");
-
-static bool nobacklight;
-module_param(nobacklight, bool, 0000);
-MODULE_PARM_DESC(nobacklight, "Turn off backlight functionality.");
-
-static bool latched;
-module_param(latched, bool, 0000);
-MODULE_PARM_DESC(latched, "Use with latched 16-bit databus");
-
-static const s16 *initp;
-static int initp_num;
-
-/* default init sequences */
-static const s16 st7735r_init[] = {
- -1, 0x01,
- -2, 150,
- -1, 0x11,
- -2, 500,
- -1, 0xB1, 0x01, 0x2C, 0x2D,
- -1, 0xB2, 0x01, 0x2C, 0x2D,
- -1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D,
- -1, 0xB4, 0x07,
- -1, 0xC0, 0xA2, 0x02, 0x84,
- -1, 0xC1, 0xC5,
- -1, 0xC2, 0x0A, 0x00,
- -1, 0xC3, 0x8A, 0x2A,
- -1, 0xC4, 0x8A, 0xEE,
- -1, 0xC5, 0x0E,
- -1, 0x20,
- -1, 0x36, 0xC0,
- -1, 0x3A, 0x05,
- -1, 0xE0, 0x0f, 0x1a, 0x0f, 0x18, 0x2f, 0x28, 0x20, 0x22,
- 0x1f, 0x1b, 0x23, 0x37, 0x00, 0x07, 0x02, 0x10,
- -1, 0xE1, 0x0f, 0x1b, 0x0f, 0x17, 0x33, 0x2c, 0x29, 0x2e,
- 0x30, 0x30, 0x39, 0x3f, 0x00, 0x07, 0x03, 0x10,
- -1, 0x29,
- -2, 100,
- -1, 0x13,
- -2, 10,
- -3
-};
-
-static const s16 ssd1289_init[] = {
- -1, 0x00, 0x0001,
- -1, 0x03, 0xA8A4,
- -1, 0x0C, 0x0000,
- -1, 0x0D, 0x080C,
- -1, 0x0E, 0x2B00,
- -1, 0x1E, 0x00B7,
- -1, 0x01, 0x2B3F,
- -1, 0x02, 0x0600,
- -1, 0x10, 0x0000,
- -1, 0x11, 0x6070,
- -1, 0x05, 0x0000,
- -1, 0x06, 0x0000,
- -1, 0x16, 0xEF1C,
- -1, 0x17, 0x0003,
- -1, 0x07, 0x0233,
- -1, 0x0B, 0x0000,
- -1, 0x0F, 0x0000,
- -1, 0x41, 0x0000,
- -1, 0x42, 0x0000,
- -1, 0x48, 0x0000,
- -1, 0x49, 0x013F,
- -1, 0x4A, 0x0000,
- -1, 0x4B, 0x0000,
- -1, 0x44, 0xEF00,
- -1, 0x45, 0x0000,
- -1, 0x46, 0x013F,
- -1, 0x30, 0x0707,
- -1, 0x31, 0x0204,
- -1, 0x32, 0x0204,
- -1, 0x33, 0x0502,
- -1, 0x34, 0x0507,
- -1, 0x35, 0x0204,
- -1, 0x36, 0x0204,
- -1, 0x37, 0x0502,
- -1, 0x3A, 0x0302,
- -1, 0x3B, 0x0302,
- -1, 0x23, 0x0000,
- -1, 0x24, 0x0000,
- -1, 0x25, 0x8000,
- -1, 0x4f, 0x0000,
- -1, 0x4e, 0x0000,
- -1, 0x22,
- -3
-};
-
-static const s16 hx8340bn_init[] = {
- -1, 0xC1, 0xFF, 0x83, 0x40,
- -1, 0x11,
- -2, 150,
- -1, 0xCA, 0x70, 0x00, 0xD9,
- -1, 0xB0, 0x01, 0x11,
- -1, 0xC9, 0x90, 0x49, 0x10, 0x28, 0x28, 0x10, 0x00, 0x06,
- -2, 20,
- -1, 0xC2, 0x60, 0x71, 0x01, 0x0E, 0x05, 0x02, 0x09, 0x31, 0x0A,
- -1, 0xC3, 0x67, 0x30, 0x61, 0x17, 0x48, 0x07, 0x05, 0x33,
- -2, 10,
- -1, 0xB5, 0x35, 0x20, 0x45,
- -1, 0xB4, 0x33, 0x25, 0x4C,
- -2, 10,
- -1, 0x3A, 0x05,
- -1, 0x29,
- -2, 10,
- -3
-};
-
-static const s16 ili9225_init[] = {
- -1, 0x0001, 0x011C,
- -1, 0x0002, 0x0100,
- -1, 0x0003, 0x1030,
- -1, 0x0008, 0x0808,
- -1, 0x000C, 0x0000,
- -1, 0x000F, 0x0A01,
- -1, 0x0020, 0x0000,
- -1, 0x0021, 0x0000,
- -2, 50,
- -1, 0x0010, 0x0A00,
- -1, 0x0011, 0x1038,
- -2, 50,
- -1, 0x0012, 0x1121,
- -1, 0x0013, 0x004E,
- -1, 0x0014, 0x676F,
- -1, 0x0030, 0x0000,
- -1, 0x0031, 0x00DB,
- -1, 0x0032, 0x0000,
- -1, 0x0033, 0x0000,
- -1, 0x0034, 0x00DB,
- -1, 0x0035, 0x0000,
- -1, 0x0036, 0x00AF,
- -1, 0x0037, 0x0000,
- -1, 0x0038, 0x00DB,
- -1, 0x0039, 0x0000,
- -1, 0x0050, 0x0000,
- -1, 0x0051, 0x060A,
- -1, 0x0052, 0x0D0A,
- -1, 0x0053, 0x0303,
- -1, 0x0054, 0x0A0D,
- -1, 0x0055, 0x0A06,
- -1, 0x0056, 0x0000,
- -1, 0x0057, 0x0303,
- -1, 0x0058, 0x0000,
- -1, 0x0059, 0x0000,
- -2, 50,
- -1, 0x0007, 0x1017,
- -2, 50,
- -3
-};
-
-static const s16 ili9320_init[] = {
- -1, 0x00E5, 0x8000,
- -1, 0x0000, 0x0001,
- -1, 0x0001, 0x0100,
- -1, 0x0002, 0x0700,
- -1, 0x0003, 0x1030,
- -1, 0x0004, 0x0000,
- -1, 0x0008, 0x0202,
- -1, 0x0009, 0x0000,
- -1, 0x000A, 0x0000,
- -1, 0x000C, 0x0000,
- -1, 0x000D, 0x0000,
- -1, 0x000F, 0x0000,
- -1, 0x0010, 0x0000,
- -1, 0x0011, 0x0007,
- -1, 0x0012, 0x0000,
- -1, 0x0013, 0x0000,
- -2, 200,
- -1, 0x0010, 0x17B0,
- -1, 0x0011, 0x0031,
- -2, 50,
- -1, 0x0012, 0x0138,
- -2, 50,
- -1, 0x0013, 0x1800,
- -1, 0x0029, 0x0008,
- -2, 50,
- -1, 0x0020, 0x0000,
- -1, 0x0021, 0x0000,
- -1, 0x0030, 0x0000,
- -1, 0x0031, 0x0505,
- -1, 0x0032, 0x0004,
- -1, 0x0035, 0x0006,
- -1, 0x0036, 0x0707,
- -1, 0x0037, 0x0105,
- -1, 0x0038, 0x0002,
- -1, 0x0039, 0x0707,
- -1, 0x003C, 0x0704,
- -1, 0x003D, 0x0807,
- -1, 0x0050, 0x0000,
- -1, 0x0051, 0x00EF,
- -1, 0x0052, 0x0000,
- -1, 0x0053, 0x013F,
- -1, 0x0060, 0x2700,
- -1, 0x0061, 0x0001,
- -1, 0x006A, 0x0000,
- -1, 0x0080, 0x0000,
- -1, 0x0081, 0x0000,
- -1, 0x0082, 0x0000,
- -1, 0x0083, 0x0000,
- -1, 0x0084, 0x0000,
- -1, 0x0085, 0x0000,
- -1, 0x0090, 0x0010,
- -1, 0x0092, 0x0000,
- -1, 0x0093, 0x0003,
- -1, 0x0095, 0x0110,
- -1, 0x0097, 0x0000,
- -1, 0x0098, 0x0000,
- -1, 0x0007, 0x0173,
- -3
-};
-
-static const s16 ili9325_init[] = {
- -1, 0x00E3, 0x3008,
- -1, 0x00E7, 0x0012,
- -1, 0x00EF, 0x1231,
- -1, 0x0001, 0x0100,
- -1, 0x0002, 0x0700,
- -1, 0x0003, 0x1030,
- -1, 0x0004, 0x0000,
- -1, 0x0008, 0x0207,
- -1, 0x0009, 0x0000,
- -1, 0x000A, 0x0000,
- -1, 0x000C, 0x0000,
- -1, 0x000D, 0x0000,
- -1, 0x000F, 0x0000,
- -1, 0x0010, 0x0000,
- -1, 0x0011, 0x0007,
- -1, 0x0012, 0x0000,
- -1, 0x0013, 0x0000,
- -2, 200,
- -1, 0x0010, 0x1690,
- -1, 0x0011, 0x0223,
- -2, 50,
- -1, 0x0012, 0x000D,
- -2, 50,
- -1, 0x0013, 0x1200,
- -1, 0x0029, 0x000A,
- -1, 0x002B, 0x000C,
- -2, 50,
- -1, 0x0020, 0x0000,
- -1, 0x0021, 0x0000,
- -1, 0x0030, 0x0000,
- -1, 0x0031, 0x0506,
- -1, 0x0032, 0x0104,
- -1, 0x0035, 0x0207,
- -1, 0x0036, 0x000F,
- -1, 0x0037, 0x0306,
- -1, 0x0038, 0x0102,
- -1, 0x0039, 0x0707,
- -1, 0x003C, 0x0702,
- -1, 0x003D, 0x1604,
- -1, 0x0050, 0x0000,
- -1, 0x0051, 0x00EF,
- -1, 0x0052, 0x0000,
- -1, 0x0053, 0x013F,
- -1, 0x0060, 0xA700,
- -1, 0x0061, 0x0001,
- -1, 0x006A, 0x0000,
- -1, 0x0080, 0x0000,
- -1, 0x0081, 0x0000,
- -1, 0x0082, 0x0000,
- -1, 0x0083, 0x0000,
- -1, 0x0084, 0x0000,
- -1, 0x0085, 0x0000,
- -1, 0x0090, 0x0010,
- -1, 0x0092, 0x0600,
- -1, 0x0007, 0x0133,
- -3
-};
-
-static const s16 ili9341_init[] = {
- -1, 0x28,
- -2, 20,
- -1, 0xCF, 0x00, 0x83, 0x30,
- -1, 0xED, 0x64, 0x03, 0x12, 0x81,
- -1, 0xE8, 0x85, 0x01, 0x79,
- -1, 0xCB, 0x39, 0x2c, 0x00, 0x34, 0x02,
- -1, 0xF7, 0x20,
- -1, 0xEA, 0x00, 0x00,
- -1, 0xC0, 0x26,
- -1, 0xC1, 0x11,
- -1, 0xC5, 0x35, 0x3E,
- -1, 0xC7, 0xBE,
- -1, 0xB1, 0x00, 0x1B,
- -1, 0xB6, 0x0a, 0x82, 0x27, 0x00,
- -1, 0xB7, 0x07,
- -1, 0x3A, 0x55,
- -1, 0x36, 0x48,
- -1, 0x11,
- -2, 120,
- -1, 0x29,
- -2, 20,
- -3
-};
-
-static const s16 ssd1351_init[] = {
- -1, 0xfd, 0x12,
- -1, 0xfd, 0xb1,
- -1, 0xae,
- -1, 0xb3, 0xf1,
- -1, 0xca, 0x7f,
- -1, 0xa0, 0x74,
- -1, 0x15, 0x00, 0x7f,
- -1, 0x75, 0x00, 0x7f,
- -1, 0xa1, 0x00,
- -1, 0xa2, 0x00,
- -1, 0xb5, 0x00,
- -1, 0xab, 0x01,
- -1, 0xb1, 0x32,
- -1, 0xb4, 0xa0, 0xb5, 0x55,
- -1, 0xbb, 0x17,
- -1, 0xbe, 0x05,
- -1, 0xc1, 0xc8, 0x80, 0xc8,
- -1, 0xc7, 0x0f,
- -1, 0xb6, 0x01,
- -1, 0xa6,
- -1, 0xaf,
- -3
-};
-
-/**
- * struct flexfb_lcd_controller - Describes the LCD controller properties
- * @name: Model name of the chip
- * @width: Width of display in pixels
- * @height: Height of display in pixels
- * @setaddrwin: Which set_addr_win() implementation to use
- * @regwidth: LCD Controller Register width in bits
- * @init_seq: LCD initialization sequence
- * @init_seq_sz: Size of LCD initialization sequence
- */
-struct flexfb_lcd_controller {
- const char *name;
- unsigned int width;
- unsigned int height;
- unsigned int setaddrwin;
- unsigned int regwidth;
- const s16 *init_seq;
- int init_seq_sz;
-};
-
-static const struct flexfb_lcd_controller flexfb_chip_table[] = {
- {
- .name = "st7735r",
- .width = 120,
- .height = 160,
- .init_seq = st7735r_init,
- .init_seq_sz = ARRAY_SIZE(st7735r_init),
- },
- {
- .name = "hx8340bn",
- .width = 176,
- .height = 220,
- .init_seq = hx8340bn_init,
- .init_seq_sz = ARRAY_SIZE(hx8340bn_init),
- },
- {
- .name = "ili9225",
- .width = 176,
- .height = 220,
- .regwidth = 16,
- .init_seq = ili9225_init,
- .init_seq_sz = ARRAY_SIZE(ili9225_init),
- },
- {
- .name = "ili9320",
- .width = 240,
- .height = 320,
- .setaddrwin = 1,
- .regwidth = 16,
- .init_seq = ili9320_init,
- .init_seq_sz = ARRAY_SIZE(ili9320_init),
- },
- {
- .name = "ili9325",
- .width = 240,
- .height = 320,
- .setaddrwin = 1,
- .regwidth = 16,
- .init_seq = ili9325_init,
- .init_seq_sz = ARRAY_SIZE(ili9325_init),
- },
- {
- .name = "ili9341",
- .width = 240,
- .height = 320,
- .init_seq = ili9341_init,
- .init_seq_sz = ARRAY_SIZE(ili9341_init),
- },
- {
- .name = "ssd1289",
- .width = 240,
- .height = 320,
- .setaddrwin = 2,
- .regwidth = 16,
- .init_seq = ssd1289_init,
- .init_seq_sz = ARRAY_SIZE(ssd1289_init),
- },
- {
- .name = "ssd1351",
- .width = 128,
- .height = 128,
- .setaddrwin = 3,
- .init_seq = ssd1351_init,
- .init_seq_sz = ARRAY_SIZE(ssd1351_init),
- },
-};
-
-/* ili9320, ili9325 */
-static void flexfb_set_addr_win_1(struct fbtft_par *par,
- int xs, int ys, int xe, int ye)
-{
- switch (par->info->var.rotate) {
- /* R20h = Horizontal GRAM Start Address */
- /* R21h = Vertical GRAM Start Address */
- case 0:
- write_reg(par, 0x0020, xs);
- write_reg(par, 0x0021, ys);
- break;
- case 180:
- write_reg(par, 0x0020, width - 1 - xs);
- write_reg(par, 0x0021, height - 1 - ys);
- break;
- case 270:
- write_reg(par, 0x0020, width - 1 - ys);
- write_reg(par, 0x0021, xs);
- break;
- case 90:
- write_reg(par, 0x0020, ys);
- write_reg(par, 0x0021, height - 1 - xs);
- break;
- }
- write_reg(par, 0x0022); /* Write Data to GRAM */
-}
-
-/* ssd1289 */
-static void flexfb_set_addr_win_2(struct fbtft_par *par,
- int xs, int ys, int xe, int ye)
-{
- switch (par->info->var.rotate) {
- /* R4Eh - Set GDDRAM X address counter */
- /* R4Fh - Set GDDRAM Y address counter */
- case 0:
- write_reg(par, 0x4e, xs);
- write_reg(par, 0x4f, ys);
- break;
- case 180:
- write_reg(par, 0x4e, par->info->var.xres - 1 - xs);
- write_reg(par, 0x4f, par->info->var.yres - 1 - ys);
- break;
- case 270:
- write_reg(par, 0x4e, par->info->var.yres - 1 - ys);
- write_reg(par, 0x4f, xs);
- break;
- case 90:
- write_reg(par, 0x4e, ys);
- write_reg(par, 0x4f, par->info->var.xres - 1 - xs);
- break;
- }
-
- /* R22h - RAM data write */
- write_reg(par, 0x22, 0);
-}
-
-/* ssd1351 */
-static void set_addr_win_3(struct fbtft_par *par,
- int xs, int ys, int xe, int ye)
-{
- write_reg(par, 0x15, xs, xe);
- write_reg(par, 0x75, ys, ye);
- write_reg(par, 0x5C);
-}
-
-static int flexfb_verify_gpios_dc(struct fbtft_par *par)
-{
- fbtft_par_dbg(DEBUG_VERIFY_GPIOS, par, "%s()\n", __func__);
-
- if (!par->gpio.dc) {
- dev_err(par->info->device,
- "Missing info about 'dc' gpio. Aborting.\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int flexfb_verify_gpios_db(struct fbtft_par *par)
-{
- int i;
- int num_db = buswidth;
-
- fbtft_par_dbg(DEBUG_VERIFY_GPIOS, par, "%s()\n", __func__);
-
- if (!par->gpio.dc) {
- dev_err(par->info->device, "Missing info about 'dc' gpio. Aborting.\n");
- return -EINVAL;
- }
- if (!par->gpio.wr) {
- dev_err(par->info->device, "Missing info about 'wr' gpio. Aborting.\n");
- return -EINVAL;
- }
- if (latched && !par->gpio.latch) {
- dev_err(par->info->device, "Missing info about 'latch' gpio. Aborting.\n");
- return -EINVAL;
- }
- if (latched)
- num_db = buswidth / 2;
- for (i = 0; i < num_db; i++) {
- if (!par->gpio.db[i]) {
- dev_err(par->info->device,
- "Missing info about 'db%02d' gpio. Aborting.\n",
- i);
- return -EINVAL;
- }
- }
-
- return 0;
-}
-
-static void flexfb_chip_load_param(const struct flexfb_lcd_controller *chip)
-{
- if (!width)
- width = chip->width;
- if (!height)
- height = chip->height;
- setaddrwin = chip->setaddrwin;
- if (chip->regwidth)
- regwidth = chip->regwidth;
- if (!init_num) {
- initp = chip->init_seq;
- initp_num = chip->init_seq_sz;
- }
-}
-
-static struct fbtft_display flex_display = { };
-
-static int flexfb_chip_init(const struct device *dev)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(flexfb_chip_table); i++)
- if (!strcmp(chip, flexfb_chip_table[i].name)) {
- flexfb_chip_load_param(&flexfb_chip_table[i]);
- return 0;
- }
-
- dev_err(dev, "chip=%s is not supported\n", chip);
-
- return -EINVAL;
-}
-
-static int flexfb_probe_common(struct spi_device *sdev,
- struct platform_device *pdev)
-{
- struct device *dev;
- struct fb_info *info;
- struct fbtft_par *par;
- int ret;
-
- initp = init;
- initp_num = init_num;
-
- if (sdev)
- dev = &sdev->dev;
- else
- dev = &pdev->dev;
-
- fbtft_init_dbg(dev, "%s(%s)\n", __func__,
- sdev ? "'SPI device'" : "'Platform device'");
-
- if (chip) {
- ret = flexfb_chip_init(dev);
- if (ret)
- return ret;
- }
-
- if (width == 0 || height == 0) {
- dev_err(dev, "argument(s) missing: width and height has to be set.\n");
- return -EINVAL;
- }
- flex_display.width = width;
- flex_display.height = height;
- fbtft_init_dbg(dev, "Display resolution: %dx%d\n", width, height);
- fbtft_init_dbg(dev, "chip = %s\n", chip ? chip : "not set");
- fbtft_init_dbg(dev, "setaddrwin = %d\n", setaddrwin);
- fbtft_init_dbg(dev, "regwidth = %d\n", regwidth);
- fbtft_init_dbg(dev, "buswidth = %d\n", buswidth);
-
- info = fbtft_framebuffer_alloc(&flex_display, dev, dev->platform_data);
- if (!info)
- return -ENOMEM;
-
- par = info->par;
- if (sdev)
- par->spi = sdev;
- else
- par->pdev = pdev;
- if (!par->init_sequence)
- par->init_sequence = initp;
- par->fbtftops.init_display = fbtft_init_display;
-
- /* registerwrite functions */
- switch (regwidth) {
- case 8:
- par->fbtftops.write_register = fbtft_write_reg8_bus8;
- break;
- case 16:
- par->fbtftops.write_register = fbtft_write_reg16_bus8;
- break;
- default:
- dev_err(dev,
- "argument 'regwidth': %d is not supported.\n",
- regwidth);
- return -EINVAL;
- }
-
- /* bus functions */
- if (sdev) {
- par->fbtftops.write = fbtft_write_spi;
- switch (buswidth) {
- case 8:
- par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
- if (!par->startbyte)
- par->fbtftops.verify_gpios = flexfb_verify_gpios_dc;
- break;
- case 9:
- if (regwidth == 16) {
- dev_err(dev, "argument 'regwidth': %d is not supported with buswidth=%d and SPI.\n",
- regwidth, buswidth);
- return -EINVAL;
- }
- par->fbtftops.write_register = fbtft_write_reg8_bus9;
- par->fbtftops.write_vmem = fbtft_write_vmem16_bus9;
- if (par->spi->master->bits_per_word_mask
- & SPI_BPW_MASK(9)) {
- par->spi->bits_per_word = 9;
- break;
- }
-
- dev_warn(dev,
- "9-bit SPI not available, emulating using 8-bit.\n");
- /* allocate buffer with room for dc bits */
- par->extra = devm_kzalloc(par->info->device,
- par->txbuf.len
- + (par->txbuf.len / 8) + 8,
- GFP_KERNEL);
- if (!par->extra) {
- ret = -ENOMEM;
- goto out_release;
- }
- par->fbtftops.write = fbtft_write_spi_emulate_9;
-
- break;
- default:
- dev_err(dev,
- "argument 'buswidth': %d is not supported with SPI.\n",
- buswidth);
- return -EINVAL;
- }
- } else {
- par->fbtftops.verify_gpios = flexfb_verify_gpios_db;
- switch (buswidth) {
- case 8:
- par->fbtftops.write = fbtft_write_gpio8_wr;
- par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
- break;
- case 16:
- par->fbtftops.write_register = fbtft_write_reg16_bus16;
- if (latched)
- par->fbtftops.write = fbtft_write_gpio16_wr_latched;
- else
- par->fbtftops.write = fbtft_write_gpio16_wr;
- par->fbtftops.write_vmem = fbtft_write_vmem16_bus16;
- break;
- default:
- dev_err(dev,
- "argument 'buswidth': %d is not supported with parallel.\n",
- buswidth);
- return -EINVAL;
- }
- }
-
- /* set_addr_win function */
- switch (setaddrwin) {
- case 0:
- /* use default */
- break;
- case 1:
- par->fbtftops.set_addr_win = flexfb_set_addr_win_1;
- break;
- case 2:
- par->fbtftops.set_addr_win = flexfb_set_addr_win_2;
- break;
- case 3:
- par->fbtftops.set_addr_win = set_addr_win_3;
- break;
- default:
- dev_err(dev, "argument 'setaddrwin': unknown value %d.\n",
- setaddrwin);
- return -EINVAL;
- }
-
- if (!nobacklight)
- par->fbtftops.register_backlight = fbtft_register_backlight;
-
- ret = fbtft_register_framebuffer(info);
- if (ret < 0)
- goto out_release;
-
- return 0;
-
-out_release:
- fbtft_framebuffer_release(info);
-
- return ret;
-}
-
-static int flexfb_remove_common(struct device *dev, struct fb_info *info)
-{
- struct fbtft_par *par;
-
- if (!info)
- return -EINVAL;
- par = info->par;
- if (par)
- fbtft_par_dbg(DEBUG_DRIVER_INIT_FUNCTIONS, par, "%s()\n",
- __func__);
- fbtft_unregister_framebuffer(info);
- fbtft_framebuffer_release(info);
-
- return 0;
-}
-
-static int flexfb_probe_spi(struct spi_device *spi)
-{
- return flexfb_probe_common(spi, NULL);
-}
-
-static int flexfb_remove_spi(struct spi_device *spi)
-{
- struct fb_info *info = spi_get_drvdata(spi);
-
- return flexfb_remove_common(&spi->dev, info);
-}
-
-static int flexfb_probe_pdev(struct platform_device *pdev)
-{
- return flexfb_probe_common(NULL, pdev);
-}
-
-static int flexfb_remove_pdev(struct platform_device *pdev)
-{
- struct fb_info *info = platform_get_drvdata(pdev);
-
- return flexfb_remove_common(&pdev->dev, info);
-}
-
-static struct spi_driver flexfb_spi_driver = {
- .driver = {
- .name = DRVNAME,
- },
- .probe = flexfb_probe_spi,
- .remove = flexfb_remove_spi,
-};
-
-static const struct platform_device_id flexfb_platform_ids[] = {
- { "flexpfb", 0 },
- { },
-};
-MODULE_DEVICE_TABLE(platform, flexfb_platform_ids);
-
-static struct platform_driver flexfb_platform_driver = {
- .driver = {
- .name = DRVNAME,
- },
- .id_table = flexfb_platform_ids,
- .probe = flexfb_probe_pdev,
- .remove = flexfb_remove_pdev,
-};
-
-static int __init flexfb_init(void)
-{
- int ret, ret2;
-
- ret = spi_register_driver(&flexfb_spi_driver);
- ret2 = platform_driver_register(&flexfb_platform_driver);
- if (ret < 0)
- return ret;
- return ret2;
-}
-
-static void __exit flexfb_exit(void)
-{
- spi_unregister_driver(&flexfb_spi_driver);
- platform_driver_unregister(&flexfb_platform_driver);
-}
-
-/* ------------------------------------------------------------------------- */
-
-module_init(flexfb_init);
-module_exit(flexfb_exit);
-
-MODULE_DESCRIPTION("Generic FB driver for TFT LCD displays");
-MODULE_AUTHOR("Noralf Tronnes");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index a62057555d1b6af01d4b430c73a9aa955f2b74b1..83469061a542648aafc5b150969c55ab222261de 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -261,11 +261,11 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
/* Build the PKO buffer pointer */
hw_buffer.u64 = 0;
if (skb_shinfo(skb)->nr_frags == 0) {
- hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((uintptr_t)skb->data);
hw_buffer.s.pool = 0;
hw_buffer.s.size = skb->len;
} else {
- hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((uintptr_t)skb->data);
hw_buffer.s.pool = 0;
hw_buffer.s.size = skb_headlen(skb);
CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
@@ -273,11 +273,12 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
skb_frag_t *fs = skb_shinfo(skb)->frags + i;
hw_buffer.s.addr =
- XKPHYS_TO_PHYS((u64)skb_frag_address(fs));
+ XKPHYS_TO_PHYS((uintptr_t)skb_frag_address(fs));
hw_buffer.s.size = skb_frag_size(fs);
CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
}
- hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)CVM_OCT_SKB_CB(skb));
+ hw_buffer.s.addr =
+ XKPHYS_TO_PHYS((uintptr_t)CVM_OCT_SKB_CB(skb));
hw_buffer.s.size = skb_shinfo(skb)->nr_frags + 1;
pko_command.s.segs = skb_shinfo(skb)->nr_frags + 1;
pko_command.s.gather = 1;
diff --git a/drivers/staging/octeon/octeon-stubs.h b/drivers/staging/octeon/octeon-stubs.h
index a4ac3bfb62a85e6536545831408778038b3373c6..b78ce9eaab85d310225e1864da4a89a71a3f2f05 100644
--- a/drivers/staging/octeon/octeon-stubs.h
+++ b/drivers/staging/octeon/octeon-stubs.h
@@ -1202,7 +1202,7 @@ static inline int cvmx_wqe_get_grp(cvmx_wqe_t *work)
static inline void *cvmx_phys_to_ptr(uint64_t physical_address)
{
- return (void *)(physical_address);
+ return (void *)(uintptr_t)(physical_address);
}
static inline uint64_t cvmx_ptr_to_phys(void *ptr)
diff --git a/drivers/staging/rtl8188eu/hal/hal8188e_rate_adaptive.c b/drivers/staging/rtl8188eu/hal/hal8188e_rate_adaptive.c
index 9ddd51685063d50e4aa1eaad42d1e255ec6881fd..5792f491b59acb58fd9aafd8f292a427c11066a4 100644
--- a/drivers/staging/rtl8188eu/hal/hal8188e_rate_adaptive.c
+++ b/drivers/staging/rtl8188eu/hal/hal8188e_rate_adaptive.c
@@ -409,7 +409,7 @@ static int odm_ARFBRefresh_8188E(struct odm_dm_struct *dm_odm, struct odm_ra_inf
pRaInfo->PTModeSS = 3;
else if (pRaInfo->HighestRate > 0x0b)
pRaInfo->PTModeSS = 2;
- else if (pRaInfo->HighestRate > 0x0b)
+ else if (pRaInfo->HighestRate > 0x03)
pRaInfo->PTModeSS = 1;
else
pRaInfo->PTModeSS = 0;
diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
index 664d93a7f90dff9709580437feab404d46af4dff..4fac9dca798e812d8f4315baff14193fb6fcf13f 100644
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -348,8 +348,10 @@ static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
}
padapter->HalData = kzalloc(sizeof(struct hal_data_8188e), GFP_KERNEL);
- if (!padapter->HalData)
- DBG_88E("cant not alloc memory for HAL DATA\n");
+ if (!padapter->HalData) {
+ DBG_88E("Failed to allocate memory for HAL data\n");
+ goto free_adapter;
+ }
/* step read_chip_version */
rtw_hal_read_chip_version(padapter);
diff --git a/drivers/staging/speakup/sysfs-driver-speakup b/drivers/staging/speakup/sysfs-driver-speakup
new file mode 100644
index 0000000000000000000000000000000000000000..be3f5d6962e90c639d056700e4947510aff94216
--- /dev/null
+++ b/drivers/staging/speakup/sysfs-driver-speakup
@@ -0,0 +1,369 @@
+What: /sys/accessibility/speakup/attrib_bleep
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Beeps the PC speaker when there is an attribute change such as
+ foreground or background color when using speakup review
+ commands. One = on, zero = off.
+
+What: /sys/accessibility/speakup/bell_pos
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This works much like a typewriter bell. If for example 72 is
+ echoed to bell_pos, it will beep the PC speaker when typing on
+ a line past character 72.
+
+What: /sys/accessibility/speakup/bleeps
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This controls whether one hears beeps through the PC speaker
+ when using speakup's review commands.
+ TODO: what values does it accept?
+
+What: /sys/accessibility/speakup/bleep_time
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This controls the duration of the PC speaker beeps speakup
+ produces.
+ TODO: What are the units? Jiffies?
+
+What: /sys/accessibility/speakup/cursor_time
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This controls cursor delay when using arrow keys. When a
+ connection is very slow, with the default setting, when moving
+ with the arrows, or backspacing etc. speakup says the incorrect
+ characters. Set this to a higher value to adjust for the delay
+ and better synchronisation between cursor position and speech.
+
+What: /sys/accessibility/speakup/delimiters
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Delimit a word from speakup.
+ TODO: add more info
+
+What: /sys/accessibility/speakup/ex_num
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO:
+
+What: /sys/accessibility/speakup/key_echo
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Controls if speakup speaks keys when they are typed. One = on,
+ zero = off or don't echo keys.
+
+What: /sys/accessibility/speakup/keymap
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Speakup keymap remaps keys to Speakup functions.
+ It uses a binary
+ format. A special program called genmap is needed to compile a
+ textual keymap into the binary format which is then loaded into
+ /sys/accessibility/speakup/keymap.
+
+What: /sys/accessibility/speakup/no_interrupt
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Controls if typing interrupts output from speakup. With
+ no_interrupt set to zero, typing on the keyboard will interrupt
+ speakup if for example
+ the say screen command is used before the
+ entire screen is read.
+ With no_interrupt set to one, if the say
+ screen command is used, and one then types on the keyboard,
+ speakup will continue to say the whole screen regardless until
+ it finishes.
+
+What: /sys/accessibility/speakup/punc_all
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This is a list of all the punctuation speakup should speak when
+ punc_level is set to four.
+
+What: /sys/accessibility/speakup/punc_level
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Controls the level of punctuation spoken as the screen is
+ displayed, not reviewed. Levels range from zero no punctuation,
+ to four, all punctuation. One corresponds to punc_some, two
+ corresponds to punc_most, and three as well as four both
+ correspond to punc_all. Some hardware synthesizers may have
+ different levels each corresponding to three and four for
+ punc_level. Also note that if punc_level is set to zero, and
+ key_echo is set to one, typed punctuation is still spoken as it
+ is typed.
+
+What: /sys/accessibility/speakup/punc_most
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This is a list of all the punctuation speakup should speak when
+ punc_level is set to two.
+
+What: /sys/accessibility/speakup/punc_some
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This is a list of all the punctuation speakup should speak when
+ punc_level is set to one.
+
+What: /sys/accessibility/speakup/reading_punc
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Almost the same as punc_level, the differences being that
+ reading_punc controls the level of punctuation when reviewing
+ the screen with speakup's screen review commands. The other
+ difference is that reading_punc set to three speaks punc_all,
+ and reading_punc set to four speaks all punctuation, including
+ spaces.
+
+What: /sys/accessibility/speakup/repeats
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: A list of characters speakup repeats. Normally, when there are
+ more than three characters in a row, speakup
+ just reads three of
+ those characters. For example, "......" would be read as dot,
+ dot, dot. If a . is added to the list of characters in repeats,
+ "......" would be read as dot, dot, dot, times six.
+
+What: /sys/accessibility/speakup/say_control
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: If set to one, speakup speaks shift, alt and control when those
+ keys are pressed. If say_control is set to zero, shift, ctrl,
+ and alt are not spoken when they are pressed.
+
+What: /sys/accessibility/speakup/say_word_ctl
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO:
+
+What: /sys/accessibility/speakup/silent
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO:
+
+What: /sys/accessibility/speakup/spell_delay
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This controls how fast a word is spelled
+ when speakup's say word
+ review command is pressed twice quickly to speak the current
+ word being reviewed. Zero just speaks the letters one after
+ another, while values one through four
+ seem to introduce more of
+ a pause between the spelling of each letter by speakup.
+
+What: /sys/accessibility/speakup/synth
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the synthesizer driver currently in use. Reading
+ synth returns the synthesizer driver currently in use. Writing
+ synth switches to the given synthesizer driver, provided it is
+ either built into the kernel, or already loaded as a module.
+
+What: /sys/accessibility/speakup/synth_direct
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Sends whatever is written to synth_direct
+ directly to the speech synthesizer in use, bypassing speakup.
+ This could be used to make the synthesizer speak
+ a string, or to
+ send control sequences to the synthesizer to change how the
+ synthesizer behaves.
+
+What: /sys/accessibility/speakup/version
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Reading version returns the version of speakup, and the version
+ of the synthesizer driver currently in use.
+
+What: /sys/accessibility/speakup/i18n/announcements
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This file contains various general announcements, most of which
+ cannot be categorized. You will find messages such as "You
+ killed Speakup", "I'm alive", "leaving help", "parked",
+ "unparked", and others. You will also find the names of the
+ screen edges and cursor tracking modes here.
+
+What: /sys/accessibility/speakup/i18n/chartab
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO
+
+What: /sys/accessibility/speakup/i18n/ctl_keys
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Here, you will find names of control keys. These are used with
+ Speakup's say_control feature.
+
+What: /sys/accessibility/speakup/i18n/function_names
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Here, you will find a list of names for Speakup functions.
+ These are used by the help system. For example, suppose that
+ you have activated help mode, and you pressed
+ keypad 3. Speakup
+ says: "keypad 3 is character, say next."
+ The message "character, say next" names a Speakup function, and
+ it comes from this function_names file.
+
+What: /sys/accessibility/speakup/i18n/states
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This file contains names for key states.
+ Again, these are part of the help system. For instance, if you
+ had pressed speakup + keypad 3, you would hear:
+ "speakup keypad 3 is go to bottom edge."
+ The speakup key is depressed, so the name of the key state is
+ speakup.
+ This part of the message comes from the states collection.
+
+What: /sys/accessibility/speakup/i18n/characters
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Through this sys entry, Speakup gives you the ability to change
+ how Speakup pronounces a given character. You could, for
+ example, change how some punctuation characters are spoken. You
+ can even change how Speakup will pronounce certain letters. For
+ further details see '12. Changing the Pronunciation of
+ Characters' in Speakup User's Guide (file spkguide.txt in
+ source).
+
+What: /sys/accessibility/speakup/i18n/colors
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: When you use the "say attributes" function, Speakup says the
+ name of the foreground and background colors. These names come
+ from the i18n/colors file.
+
+What: /sys/accessibility/speakup/i18n/formatted
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This group of messages contains embedded formatting codes, to
+ specify the type and width of displayed data. If you change
+ these, you must preserve all of the formatting codes, and they
+ must appear in the order used by the default messages.
+
+What: /sys/accessibility/speakup/i18n/key_names
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Again, key_names is used by Speakup's help system. In the
+ previous example, Speakup said that you pressed "keypad 3."
+ This name came from the key_names file.
+
+What: /sys/accessibility/speakup/<synth-name>/
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: In `/sys/accessibility/speakup` is a directory corresponding to
+ the synthesizer driver currently in use (E.G) `soft` for the
+ soft driver. This directory contains files which control the
+ speech synthesizer itself,
+ as opposed to controlling the speakup
+ screen reader. The parameters in this directory have the same
+ names and functions across all
+ supported synthesizers. The range
+ of values for freq, pitch, rate, and vol is the same for all
+ supported synthesizers, with the given range being internally
+ mapped by the driver to more or less fit the range of values
+ supported for a given parameter by the individual synthesizer.
+ Below is a description of values and parameters for soft
+ synthesizer, which is currently the most commonly used.
+
+What: /sys/accessibility/speakup/soft/caps_start
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This is the string that is sent to the synthesizer to cause it
+ to start speaking uppercase letters. For the soft synthesizer
+ and most others, this causes the pitch of the voice to rise
+ above the currently set pitch.
+
+What: /sys/accessibility/speakup/soft/caps_stop
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This is the string sent to the synthesizer to cause it to stop
+ speaking uppercase letters. In the case of the soft synthesizer
+ and most others, this returns the pitch of the voice
+ down to the
+ currently set pitch.
+
+What: /sys/accessibility/speakup/soft/delay_time
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO:
+
+What: /sys/accessibility/speakup/soft/direct
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Controls if punctuation is spoken by speakup, or by the
+ synthesizer.
+ For example, speakup speaks ">" as "greater", while
+ the espeak synthesizer used by the soft driver speaks "greater
+ than". Zero lets speakup speak the punctuation. One lets the
+ synthesizer itself speak punctuation.
+
+What: /sys/accessibility/speakup/soft/freq
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the frequency of the speech synthesizer. Range is
+ 0-9.
+
+What: /sys/accessibility/speakup/soft/full_time
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO:
+
+What: /sys/accessibility/speakup/soft/jiffy_delta
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This controls how many jiffys the kernel gives to the
+ synthesizer. Setting this too high can make a system unstable,
+ or even crash it.
+
+What: /sys/accessibility/speakup/soft/pitch
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the pitch of the synthesizer. The range is 0-9.
+
+What: /sys/accessibility/speakup/soft/punct
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the amount of punctuation spoken by the
+ synthesizer. The range for the soft driver seems to be 0-2.
+ TODO: How is this related to speakup's punc_level, or
+ reading_punc.
+
+What: /sys/accessibility/speakup/soft/rate
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the rate of the synthesizer. Range is from zero
+ slowest, to nine fastest.
+
+What: /sys/accessibility/speakup/soft/tone
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the tone of the speech synthesizer. The range for
+ the soft driver seems to be 0-2. This seems to make no
+ difference if using espeak and the espeakup connector.
+ TODO: does espeakup support different tonalities?
+
+What: /sys/accessibility/speakup/soft/trigger_time
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO:
+
+What: /sys/accessibility/speakup/soft/voice
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the voice used by the synthesizer if the
+ synthesizer can speak in more than one voice. The range for the
+ soft driver is 0-7. Note that while espeak supports multiple
+ voices, this parameter will not set the voice when the espeakup
+ connector is used between speakup and espeak.
+
+What: /sys/accessibility/speakup/soft/vol
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the volume of the speech synthesizer. Range is 0-9,
+ with zero being the softest, and nine being the loudest.
+
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
index bc1eaa3a07731797e10186b6ec60b73e9c608310..826016c3431a102d8e4a57ab7dbb4ad9c250d6dd 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
@@ -12,7 +12,7 @@
static const struct snd_pcm_hardware snd_bcm2835_playback_hw = {
.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_DRAIN_TRIGGER | SNDRV_PCM_INFO_SYNC_APPLPTR),
+ SNDRV_PCM_INFO_SYNC_APPLPTR),
.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000,
.rate_min = 8000,
@@ -29,7 +29,7 @@ static const struct snd_pcm_hardware snd_bcm2835_playback_hw = {
static const struct snd_pcm_hardware snd_bcm2835_playback_spdif_hw = {
.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_DRAIN_TRIGGER | SNDRV_PCM_INFO_SYNC_APPLPTR),
+ SNDRV_PCM_INFO_SYNC_APPLPTR),
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000,
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
index 23fba01107b9fff39253b3f7877a85ceb37a2d2a..c6f9cf1913d20e90cb5e8d2f0e9d8ee5ce68765c 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
@@ -289,6 +289,7 @@ int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream)
VC_AUDIO_MSG_TYPE_STOP, false);
}
+/* FIXME: this doesn't seem working as expected for "draining" */
int bcm2835_audio_drain(struct bcm2835_alsa_stream *alsa_stream)
{
struct vc_audio_msg m = {
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index c6bb4aaf9bd02fc18b6ca9e1bbc7a37e5724c805..082302944c374d7f4053313fa46d7ff97cd298ec 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -1748,8 +1748,10 @@ vt6655_probe(struct pci_dev *pcid, const struct pci_device_id *ent)
priv->hw->max_signal = 100;
- if (vnt_init(priv))
+ if (vnt_init(priv)) {
+ device_free_info(priv);
return -ENODEV;
+ }
device_print_info(priv);
pci_set_drvdata(pcid, priv);