media: dt-bindings: Convert Cadence CSI2RX binding to YAML

Convert the Cadence CSI2RX binding to use YAML schema.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Documentation/devicetree/bindings/media/cdns,csi2rx.txt

-Cadence MIPI-CSI2 RX controller
-===============================
-
-The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
-lanes in input, and 4 different pixel streams in output.
-
-Required properties:
-  - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible
-  - reg: base address and size of the memory mapped region
-  - clocks: phandles to the clocks driving the controller
-  - clock-names: must contain:
-    * sys_clk: main clock
-    * p_clk: register bank clock
-    * pixel_if[0-3]_clk: pixel stream output clock, one for each stream
-                         implemented in hardware, between 0 and 3
-
-Optional properties:
-  - phys: phandle to the external D-PHY, phy-names must be provided
-  - phy-names: must contain "dphy", if the implementation uses an
-               external D-PHY
-
-Required subnodes:
-  - ports: A ports node with one port child node per device input and output
-           port, in accordance with the video interface bindings defined in
-           Documentation/devicetree/bindings/media/video-interfaces.txt. The
-           port nodes are numbered as follows:
-
-           Port Description
-           -----------------------------
-           0    CSI-2 input
-           1    Stream 0 output
-           2    Stream 1 output
-           3    Stream 2 output
-           4    Stream 3 output
-
-           The stream output port nodes are optional if they are not
-           connected to anything at the hardware level or implemented
-           in the design.Since there is only one endpoint per port,
-           the endpoints are not numbered.
-
-
-Example:
-
-csi2rx: csi-bridge@0d060000 {
-	compatible = "cdns,csi2rx";
-	reg = <0x0d060000 0x1000>;
-	clocks = <&byteclock>, <&byteclock>
-		 <&coreclock>, <&coreclock>,
-		 <&coreclock>, <&coreclock>;
-	clock-names = "sys_clk", "p_clk",
-		      "pixel_if0_clk", "pixel_if1_clk",
-		      "pixel_if2_clk", "pixel_if3_clk";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			csi2rx_in_sensor: endpoint {
-				remote-endpoint = <&sensor_out_csi2rx>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			csi2rx_out_grabber0: endpoint {
-				remote-endpoint = <&grabber0_in_csi2rx>;
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			csi2rx_out_grabber1: endpoint {
-				remote-endpoint = <&grabber1_in_csi2rx>;
-			};
-		};
-
-		port@3 {
-			reg = <3>;
-
-			csi2rx_out_grabber2: endpoint {
-				remote-endpoint = <&grabber2_in_csi2rx>;
-			};
-		};
-
-		port@4 {
-			reg = <4>;
-
-			csi2rx_out_grabber3: endpoint {
-				remote-endpoint = <&grabber3_in_csi2rx>;
-			};
-		};
-	};
-};

Documentation/devicetree/bindings/media/cdns,csi2rx.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MIPI-CSI2 RX controller
+
+description: |
+  The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
+  lanes in input, and 4 different pixel streams in output.
+
+maintainers:
+  - Pratyush Yadav <p.yadav@ti.com>
+
+properties:
+  compatible:
+    contains:
+      const: cdns,csi2rx
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Main clock
+      - description: Register bank clock
+      - description: Pixel stream 0 output clock
+      - description: Pixel stream 1 output clock
+      - description: Pixel stream 2 output clock
+      - description: Pixel stream 3 output clock
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: sys_clk
+      - const: p_clk
+      - const: pixel_if0_clk
+      - const: pixel_if1_clk
+      - const: pixel_if2_clk
+      - const: pixel_if3_clk
+
+  phys:
+    maxItems: 1
+    description: phandle to the external D-PHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 input
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Stream 0 output
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Stream 1 output
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Stream 2 output
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Stream 3 output
+
+    required:
+      - port@0
+
+
+dependencies:
+  phys: [ 'phy-names' ]
+  phy-names: [ 'phys' ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    csi2rx: csi-bridge@d060000 {
+      compatible = "cdns,csi2rx";
+      reg = <0x0d060000 0x1000>;
+      clocks = <&byteclock>, <&byteclock>,
+        <&coreclock>, <&coreclock>,
+        <&coreclock>, <&coreclock>;
+      clock-names = "sys_clk", "p_clk",
+              "pixel_if0_clk", "pixel_if1_clk",
+              "pixel_if2_clk", "pixel_if3_clk";
+      phys = <&dphy0>;
+      phy-names = "dphy";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+
+          csi2rx_in_sensor: endpoint {
+            remote-endpoint = <&sensor_out_csi2rx>;
+            clock-lanes = <0>;
+            data-lanes = <1 2>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+
+          csi2rx_out_grabber0: endpoint {
+            remote-endpoint = <&grabber0_in_csi2rx>;
+          };
+        };
+
+        port@2 {
+          reg = <2>;
+
+          csi2rx_out_grabber1: endpoint {
+            remote-endpoint = <&grabber1_in_csi2rx>;
+          };
+        };
+
+        port@3 {
+          reg = <3>;
+
+          csi2rx_out_grabber2: endpoint {
+            remote-endpoint = <&grabber2_in_csi2rx>;
+          };
+        };
+
+        port@4 {
+          reg = <4>;
+
+          csi2rx_out_grabber3: endpoint {
+            remote-endpoint = <&grabber3_in_csi2rx>;
+          };
+        };
+      };
+    };