From bf64dd262eaaece2ff560e86fabf94c6725f3b5c Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 3 Aug 2015 09:26:41 +0200
Subject: [PATCH] ARM: ux500: add an SMP enablement type and move cpu nodes
The "cpus" node cannot be inside the "soc" node, while this
works for the CoreSight blocks, the early boot code will look
for "cpus" directly under the root node, so this is a hard
convention. So move the CPU nodes.
Augment the "reg" property to match what is actually in the
hardware: 0x300 and 0x301 respectively.
Then add an SMP enablement type to be used by the SMP init
code, "ste,dbx500-smp".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
.../devicetree/bindings/arm/cpus.txt | 1 +
arch/arm/boot/dts/ste-dbx5x0.dtsi | 53 ++++++++++---------
2 files changed, 28 insertions(+), 26 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index d6b794cef0b8b..91e6e5c478d00 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -199,6 +199,7 @@ nodes to be present and contain the properties described below.
"qcom,kpss-acc-v1"
"qcom,kpss-acc-v2"
"rockchip,rk3066-smp"
+ "ste,dbx500-smp"
- cpu-release-addr
Usage: required for systems that have an "enable-method"
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index a75f3289e653a..b8f81fb418ce6 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -15,6 +15,33 @@
#include "skeleton.dtsi"
/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "ste,dbx500-smp";
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+ };
+ CPU0: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x300>;
+ };
+ CPU1: cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x301>;
+ };
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -22,32 +49,6 @@
interrupt-parent = <&intc>;
ranges;
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&CPU0>;
- };
- core1 {
- cpu = <&CPU1>;
- };
- };
- };
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- };
- CPU1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- };
- };
-
ptm@801ae000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x801ae000 0x1000>;
--
GitLab