From c28f8a1f2b5ed24d48ca6827d0ae499c2e48e8c9 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marex@denx.de>
Date: Thu, 12 Dec 2013 22:49:58 +0100
Subject: [PATCH] PCI: imx6: Make reset-gpio optional
Some boards do not have a PCIe reset GPIO. To avoid probe failure on these
boards, make the reset GPIO optional as well.
[bhelgaas: whitespace fixes]
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Frank Li <lznuaa@gmail.com>
Cc: Harro Haan <hrhaan@gmail.com>
Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
Cc: Pratyush Anand <pratyush.anand@st.com>
Cc: Richard Zhu <r65037@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sean Cross <xobs@kosagi.com>
Cc: Siva Reddy Kallam <siva.kallam@samsung.com>
Cc: Srikanth T Shivanand <ts.srikanth@samsung.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Yinghai Lu <yinghai@kernel.org>
---
.../bindings/pci/designware-pcie.txt | 2 ++
drivers/pci/host/pci-imx6.c | 27 +++++++++----------
2 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index d5d26d443693c..d6fae13ff0628 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -19,6 +19,8 @@ Required properties:
to define the mapping of the PCIe interface to interrupt
numbers.
- num-lanes: number of lanes to use
+
+Optional properties:
- reset-gpio: gpio pin number of power good signal
Optional properties for fsl,imx6q-pcie
diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index 9fc1cb66c64e9..1176bddee1cc0 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -214,9 +214,12 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
- gpio_set_value(imx6_pcie->reset_gpio, 0);
- msleep(100);
- gpio_set_value(imx6_pcie->reset_gpio, 1);
+ /* Some boards don't have PCIe reset GPIO. */
+ if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+ gpio_set_value(imx6_pcie->reset_gpio, 0);
+ msleep(100);
+ gpio_set_value(imx6_pcie->reset_gpio, 1);
+ }
return 0;
}
@@ -432,17 +435,13 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
/* Fetch GPIOs */
imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
- if (!gpio_is_valid(imx6_pcie->reset_gpio)) {
- dev_err(&pdev->dev, "no reset-gpio defined\n");
- ret = -ENODEV;
- }
- ret = devm_gpio_request_one(&pdev->dev,
- imx6_pcie->reset_gpio,
- GPIOF_OUT_INIT_LOW,
- "PCIe reset");
- if (ret) {
- dev_err(&pdev->dev, "unable to get reset gpio\n");
- return ret;
+ if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+ ret = devm_gpio_request_one(&pdev->dev, imx6_pcie->reset_gpio,
+ GPIOF_OUT_INIT_LOW, "PCIe reset");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to get reset gpio\n");
+ return ret;
+ }
}
imx6_pcie->power_on_gpio = of_get_named_gpio(np, "power-on-gpio", 0);
--
GitLab