From c408a3794d6222ab43ab26648385f850a82f0803 Mon Sep 17 00:00:00 2001
From: Kristen Accardi <kristen.c.accardi@intel.com>
Date: Tue, 17 Jan 2006 16:57:04 -0800
Subject: [PATCH] [PATCH] PCI: quirk for IBM Dock II cardbus controllers
The IBM Dock II cardbus bridges require some extra configuration
before Yenta is loaded in order to setup the Interrupts to be
routed properly.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/pci/quirks.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index dda6099903c18..7ec9fc9a9a427 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1242,6 +1242,33 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pc
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
+/*
+ * Fixup the cardbus bridges on the IBM Dock II docking station
+ */
+static void __devinit quirk_ibm_dock2_cardbus(struct pci_dev *dev)
+{
+ u32 val;
+
+ /*
+ * tie the 2 interrupt pins to INTA, and configure the
+ * multifunction routing register to handle this.
+ */
+ if ((dev->subsystem_vendor == PCI_VENDOR_ID_IBM) &&
+ (dev->subsystem_device == 0x0148)) {
+ printk(KERN_INFO "PCI: Found IBM Dock II Cardbus Bridge "
+ "applying quirk\n");
+ pci_read_config_dword(dev, 0x8c, &val);
+ val = ((val & 0xffffff00) | 0x1002);
+ pci_write_config_dword(dev, 0x8c, val);
+ pci_read_config_dword(dev, 0x80, &val);
+ val = ((val & 0x00ffff00) | 0x2864c077);
+ pci_write_config_dword(dev, 0x80, val);
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420,
+ quirk_ibm_dock2_cardbus);
+
static void __devinit quirk_netmos(struct pci_dev *dev)
{
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
--
GitLab