diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 3a52f570328662da90413eafdb750002d87d9575..49ea02c467bf1c9757dd477af9596e4a68437bb6 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -94,6 +94,7 @@ config MMC_SDHCI_PCI
depends on MMC_SDHCI && PCI
select MMC_CQHCI
select IOSF_MBI if X86
+ select MMC_SDHCI_IO_ACCESSORS
help
This selects the PCI Secure Digital Host Controller Interface.
Most controllers found today are PCI devices.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 390ee162fe7159b0e9e2086e304d7cffd7318280..11c4598e91d9343c26c06cb9bc96332a0ebced47 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \
- sdhci-pci-dwc-mshc.o
+ sdhci-pci-dwc-mshc.o sdhci-pci-gli.o
obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 3271c2d766296c28b4174a1981b95dd83e08f382..1d1953dfc54b12136082a9c59bf242665526cfd4 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -495,7 +495,12 @@ static int esdhc_of_enable_dma(struct sdhci_host *host)
dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
- value |= ESDHC_DMA_SNOOP;
+
+ if (of_dma_is_coherent(dev->of_node))
+ value |= ESDHC_DMA_SNOOP;
+ else
+ value &= ~ESDHC_DMA_SNOOP;
+
sdhci_writel(host, value, ESDHC_DMA_SYSCTL);
return 0;
}
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index e1ca185d732876f8653a93a0eddb52330b18b84d..eaffa85bc7285d1f74b30d95a2d11e6efb09b561 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -1685,6 +1685,8 @@ static const struct pci_device_id pci_ids[] = {
SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
+ SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
+ SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
/* Generic SD host controller */
{PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
new file mode 100644
index 0000000000000000000000000000000000000000..5eea8d70a85d7ba9ecf2a9b3217581e59f552f08
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Genesys Logic, Inc.
+ *
+ * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
+ *
+ * Version: v0.9.0 (2019-08-08)
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/pci.h>
+#include <linux/mmc/mmc.h>
+#include <linux/delay.h>
+#include "sdhci.h"
+#include "sdhci-pci.h"
+
+/* Genesys Logic extra registers */
+#define SDHCI_GLI_9750_WT 0x800
+#define SDHCI_GLI_9750_WT_EN BIT(0)
+#define GLI_9750_WT_EN_ON 0x1
+#define GLI_9750_WT_EN_OFF 0x0
+
+#define SDHCI_GLI_9750_DRIVING 0x860
+#define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0)
+#define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26)
+#define GLI_9750_DRIVING_1_VALUE 0xFFF
+#define GLI_9750_DRIVING_2_VALUE 0x3
+
+#define SDHCI_GLI_9750_PLL 0x864
+#define SDHCI_GLI_9750_PLL_TX2_INV BIT(23)
+#define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20)
+#define GLI_9750_PLL_TX2_INV_VALUE 0x1
+#define GLI_9750_PLL_TX2_DLY_VALUE 0x0
+
+#define SDHCI_GLI_9750_SW_CTRL 0x874
+#define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6)
+#define GLI_9750_SW_CTRL_4_VALUE 0x3
+
+#define SDHCI_GLI_9750_MISC 0x878
+#define SDHCI_GLI_9750_MISC_TX1_INV BIT(2)
+#define SDHCI_GLI_9750_MISC_RX_INV BIT(3)
+#define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4)
+#define GLI_9750_MISC_TX1_INV_VALUE 0x0
+#define GLI_9750_MISC_RX_INV_ON 0x1
+#define GLI_9750_MISC_RX_INV_OFF 0x0
+#define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF
+#define GLI_9750_MISC_TX1_DLY_VALUE 0x5
+
+#define SDHCI_GLI_9750_TUNING_CONTROL 0x540
+#define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4)
+#define GLI_9750_TUNING_CONTROL_EN_ON 0x1
+#define GLI_9750_TUNING_CONTROL_EN_OFF 0x0
+#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16)
+#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19)
+#define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1
+#define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2
+
+#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544
+#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0)
+#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1
+
+#define GLI_MAX_TUNING_LOOP 40
+
+/* Genesys Logic chipset */
+static inline void gl9750_wt_on(struct sdhci_host *host)
+{
+ u32 wt_value;
+ u32 wt_enable;
+
+ wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
+ wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
+
+ if (wt_enable == GLI_9750_WT_EN_ON)
+ return;
+
+ wt_value &= ~SDHCI_GLI_9750_WT_EN;
+ wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON);
+
+ sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
+}
+
+static inline void gl9750_wt_off(struct sdhci_host *host)
+{
+ u32 wt_value;
+ u32 wt_enable;
+
+ wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
+ wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
+
+ if (wt_enable == GLI_9750_WT_EN_OFF)
+ return;
+
+ wt_value &= ~SDHCI_GLI_9750_WT_EN;
+ wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF);
+
+ sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
+}
+
+static void gli_set_9750(struct sdhci_host *host)
+{
+ u32 driving_value;
+ u32 pll_value;
+ u32 sw_ctrl_value;
+ u32 misc_value;
+ u32 parameter_value;
+ u32 control_value;
+ u16 ctrl2;
+
+ gl9750_wt_on(host);
+
+ driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
+ pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
+ sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
+ misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
+ parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
+ control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
+
+ driving_value &= ~(SDHCI_GLI_9750_DRIVING_1);
+ driving_value &= ~(SDHCI_GLI_9750_DRIVING_2);
+ driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1,
+ GLI_9750_DRIVING_1_VALUE);
+ driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2,
+ GLI_9750_DRIVING_2_VALUE);
+ sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
+
+ sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4;
+ sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4,
+ GLI_9750_SW_CTRL_4_VALUE);
+ sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
+
+ /* reset the tuning flow after reinit and before starting tuning */
+ pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV;
+ pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY;
+ pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV,
+ GLI_9750_PLL_TX2_INV_VALUE);
+ pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY,
+ GLI_9750_PLL_TX2_DLY_VALUE);
+
+ misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV;
+ misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
+ misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY;
+ misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV,
+ GLI_9750_MISC_TX1_INV_VALUE);
+ misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
+ GLI_9750_MISC_RX_INV_VALUE);
+ misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY,
+ GLI_9750_MISC_TX1_DLY_VALUE);
+
+ parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY;
+ parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY,
+ GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE);
+
+ control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1;
+ control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2;
+ control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1,
+ GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE);
+ control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2,
+ GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE);
+
+ sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
+ sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
+
+ /* disable tuned clk */
+ ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
+ sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
+
+ /* enable tuning parameters control */
+ control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
+ control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
+ GLI_9750_TUNING_CONTROL_EN_ON);
+ sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
+
+ /* write tuning parameters */
+ sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
+
+ /* disable tuning parameters control */
+ control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
+ control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
+ GLI_9750_TUNING_CONTROL_EN_OFF);
+ sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
+
+ /* clear tuned clk */
+ ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
+ sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
+
+ gl9750_wt_off(host);
+}
+
+static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
+{
+ u32 misc_value;
+
+ gl9750_wt_on(host);
+
+ misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
+ misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
+ if (b) {
+ misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
+ GLI_9750_MISC_RX_INV_ON);
+ } else {
+ misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
+ GLI_9750_MISC_RX_INV_OFF);
+ }
+ sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
+
+ gl9750_wt_off(host);
+}
+
+static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
+{
+ int i;
+ int rx_inv;
+
+ for (rx_inv = 0; rx_inv < 2; rx_inv++) {
+ gli_set_9750_rx_inv(host, !!rx_inv);
+ sdhci_start_tuning(host);
+
+ for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
+ u16 ctrl;
+
+ sdhci_send_tuning(host, opcode);
+
+ if (!host->tuning_done) {
+ sdhci_abort_tuning(host, opcode);
+ break;
+ }
+
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
+ if (ctrl & SDHCI_CTRL_TUNED_CLK)
+ return 0; /* Success! */
+ break;
+ }
+ }
+ }
+ if (!host->tuning_done) {
+ pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
+ mmc_hostname(host->mmc));
+ return -ETIMEDOUT;
+ }
+
+ pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
+ mmc_hostname(host->mmc));
+ sdhci_reset_tuning(host);
+
+ return -EAGAIN;
+}
+
+static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+ host->mmc->retune_period = 0;
+ if (host->tuning_mode == SDHCI_TUNING_MODE_1)
+ host->mmc->retune_period = host->tuning_count;
+
+ gli_set_9750(host);
+ host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
+ sdhci_end_tuning(host);
+
+ return 0;
+}
+
+static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
+{
+ struct sdhci_host *host = slot->host;
+
+ slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ sdhci_enable_v4_mode(host);
+
+ return 0;
+}
+
+static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
+{
+ struct sdhci_host *host = slot->host;
+
+ slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ sdhci_enable_v4_mode(host);
+
+ return 0;
+}
+
+static void sdhci_gli_voltage_switch(struct sdhci_host *host)
+{
+ /*
+ * According to Section 3.6.1 signal voltage switch procedure in
+ * SD Host Controller Simplified Spec. 4.20, steps 6~8 are as
+ * follows:
+ * (6) Set 1.8V Signal Enable in the Host Control 2 register.
+ * (7) Wait 5ms. 1.8V voltage regulator shall be stable within this
+ * period.
+ * (8) If 1.8V Signal Enable is cleared by Host Controller, go to
+ * step (12).
+ *
+ * Wait 5ms after set 1.8V signal enable in Host Control 2 register
+ * to ensure 1.8V signal enable bit is set by GL9750/GL9755.
+ */
+ usleep_range(5000, 5500);
+}
+
+static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
+{
+ sdhci_reset(host, mask);
+ gli_set_9750(host);
+}
+
+static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
+{
+ u32 value;
+
+ value = readl(host->ioaddr + reg);
+ if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff)))
+ value |= 0xc8;
+
+ return value;
+}
+
+static const struct sdhci_ops sdhci_gl9755_ops = {
+ .set_clock = sdhci_set_clock,
+ .enable_dma = sdhci_pci_enable_dma,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .voltage_switch = sdhci_gli_voltage_switch,
+};
+
+const struct sdhci_pci_fixes sdhci_gl9755 = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
+ .probe_slot = gli_probe_slot_gl9755,
+ .ops = &sdhci_gl9755_ops,
+};
+
+static const struct sdhci_ops sdhci_gl9750_ops = {
+ .read_l = sdhci_gl9750_readl,
+ .set_clock = sdhci_set_clock,
+ .enable_dma = sdhci_pci_enable_dma,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_gl9750_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .voltage_switch = sdhci_gli_voltage_switch,
+ .platform_execute_tuning = gl9750_execute_tuning,
+};
+
+const struct sdhci_pci_fixes sdhci_gl9750 = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
+ .probe_slot = gli_probe_slot_gl9750,
+ .ops = &sdhci_gl9750_ops,
+};
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index 1abc9d47a4c03e58a88769102914e02acbbb0bcd..558202fe64c6719bd4651a9dfe1f71e3f7d0d13f 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -68,6 +68,9 @@
#define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202
+#define PCI_DEVICE_ID_GLI_9755 0x9755
+#define PCI_DEVICE_ID_GLI_9750 0x9750
+
/*
* PCI device class and mask
*/
@@ -188,5 +191,7 @@ int sdhci_pci_enable_dma(struct sdhci_host *host);
extern const struct sdhci_pci_fixes sdhci_arasan;
extern const struct sdhci_pci_fixes sdhci_snps;
extern const struct sdhci_pci_fixes sdhci_o2;
+extern const struct sdhci_pci_fixes sdhci_gl9750;
+extern const struct sdhci_pci_fixes sdhci_gl9755;
#endif /* __SDHCI_PCI_H */
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 02d8f524bb9e6fc9b181d3d9616040ce3bb94dc9..7bc950520fd9525752f3801067d11fc7b77e9b31 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -4,6 +4,7 @@
*/
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -104,6 +105,7 @@
struct sdhci_tegra_soc_data {
const struct sdhci_pltfm_data *pdata;
+ u64 dma_mask;
u32 nvquirks;
u8 min_tap_delay;
u8 max_tap_delay;
@@ -1233,11 +1235,25 @@ static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = {
.update_dcmd_desc = sdhci_tegra_update_dcmd_desc,
};
+static int tegra_sdhci_set_dma_mask(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *platform = sdhci_priv(host);
+ struct sdhci_tegra *tegra = sdhci_pltfm_priv(platform);
+ const struct sdhci_tegra_soc_data *soc = tegra->soc_data;
+ struct device *dev = mmc_dev(host->mmc);
+
+ if (soc->dma_mask)
+ return dma_set_mask_and_coherent(dev, soc->dma_mask);
+
+ return 0;
+}
+
static const struct sdhci_ops tegra_sdhci_ops = {
.get_ro = tegra_sdhci_get_ro,
.read_w = tegra_sdhci_readw,
.write_l = tegra_sdhci_writel,
.set_clock = tegra_sdhci_set_clock,
+ .set_dma_mask = tegra_sdhci_set_dma_mask,
.set_bus_width = sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
.platform_execute_tuning = tegra_sdhci_execute_tuning,
@@ -1257,6 +1273,7 @@ static const struct sdhci_pltfm_data sdhci_tegra20_pdata = {
static const struct sdhci_tegra_soc_data soc_data_tegra20 = {
.pdata = &sdhci_tegra20_pdata,
+ .dma_mask = DMA_BIT_MASK(32),
.nvquirks = NVQUIRK_FORCE_SDHCI_SPEC_200 |
NVQUIRK_ENABLE_BLOCK_GAP_DET,
};
@@ -1283,6 +1300,7 @@ static const struct sdhci_pltfm_data sdhci_tegra30_pdata = {
static const struct sdhci_tegra_soc_data soc_data_tegra30 = {
.pdata = &sdhci_tegra30_pdata,
+ .dma_mask = DMA_BIT_MASK(32),
.nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300 |
NVQUIRK_ENABLE_SDR50 |
NVQUIRK_ENABLE_SDR104 |
@@ -1295,6 +1313,7 @@ static const struct sdhci_ops tegra114_sdhci_ops = {
.write_w = tegra_sdhci_writew,
.write_l = tegra_sdhci_writel,
.set_clock = tegra_sdhci_set_clock,
+ .set_dma_mask = tegra_sdhci_set_dma_mask,
.set_bus_width = sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
.platform_execute_tuning = tegra_sdhci_execute_tuning,
@@ -1316,6 +1335,7 @@ static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
static const struct sdhci_tegra_soc_data soc_data_tegra114 = {
.pdata = &sdhci_tegra114_pdata,
+ .dma_mask = DMA_BIT_MASK(32),
};
static const struct sdhci_pltfm_data sdhci_tegra124_pdata = {
@@ -1325,22 +1345,13 @@ static const struct sdhci_pltfm_data sdhci_tegra124_pdata = {
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
- .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
- /*
- * The TRM states that the SD/MMC controller found on
- * Tegra124 can address 34 bits (the maximum supported by
- * the Tegra memory controller), but tests show that DMA
- * to or from above 4 GiB doesn't work. This is possibly
- * caused by missing programming, though it's not obvious
- * what sequence is required. Mark 64-bit DMA broken for
- * now to fix this for existing users (e.g. Nyan boards).
- */
- SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.ops = &tegra114_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra124 = {
.pdata = &sdhci_tegra124_pdata,
+ .dma_mask = DMA_BIT_MASK(34),
};
static const struct sdhci_ops tegra210_sdhci_ops = {
@@ -1349,6 +1360,7 @@ static const struct sdhci_ops tegra210_sdhci_ops = {
.write_w = tegra210_sdhci_writew,
.write_l = tegra_sdhci_writel,
.set_clock = tegra_sdhci_set_clock,
+ .set_dma_mask = tegra_sdhci_set_dma_mask,
.set_bus_width = sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
@@ -1369,6 +1381,7 @@ static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {
static const struct sdhci_tegra_soc_data soc_data_tegra210 = {
.pdata = &sdhci_tegra210_pdata,
+ .dma_mask = DMA_BIT_MASK(34),
.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
NVQUIRK_HAS_PADCALIB |
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
@@ -1383,6 +1396,7 @@ static const struct sdhci_ops tegra186_sdhci_ops = {
.read_w = tegra_sdhci_readw,
.write_l = tegra_sdhci_writel,
.set_clock = tegra_sdhci_set_clock,
+ .set_dma_mask = tegra_sdhci_set_dma_mask,
.set_bus_width = sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
@@ -1398,20 +1412,13 @@ static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
- .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
- /* SDHCI controllers on Tegra186 support 40-bit addressing.
- * IOVA addresses are 48-bit wide on Tegra186.
- * With 64-bit dma mask used for SDHCI, accesses can
- * be broken. Disable 64-bit dma, which would fall back
- * to 32-bit dma mask. Ideally 40-bit dma mask would work,
- * But it is not supported as of now.
- */
- SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.ops = &tegra186_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra186 = {
.pdata = &sdhci_tegra186_pdata,
+ .dma_mask = DMA_BIT_MASK(40),
.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
NVQUIRK_HAS_PADCALIB |
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
@@ -1424,6 +1431,7 @@ static const struct sdhci_tegra_soc_data soc_data_tegra186 = {
static const struct sdhci_tegra_soc_data soc_data_tegra194 = {
.pdata = &sdhci_tegra186_pdata,
+ .dma_mask = DMA_BIT_MASK(39),
.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
NVQUIRK_HAS_PADCALIB |
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 4b297f397326c6e6ea1d3a9f5dbe7c6aeef2c30d..b056400e34b14d5ba0eba44b6c72556c7d273592 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2874,6 +2874,7 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p)
static void sdhci_adma_show_error(struct sdhci_host *host)
{
void *desc = host->adma_table;
+ dma_addr_t dma = host->adma_addr;
sdhci_dumpregs(host);
@@ -2881,18 +2882,21 @@ static void sdhci_adma_show_error(struct sdhci_host *host)
struct sdhci_adma2_64_desc *dma_desc = desc;
if (host->flags & SDHCI_USE_64_BIT_DMA)
- DBG("%p: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n",
- desc, le32_to_cpu(dma_desc->addr_hi),
+ SDHCI_DUMP("%08llx: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ (unsigned long long)dma,
+ le32_to_cpu(dma_desc->addr_hi),
le32_to_cpu(dma_desc->addr_lo),
le16_to_cpu(dma_desc->len),
le16_to_cpu(dma_desc->cmd));
else
- DBG("%p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
- desc, le32_to_cpu(dma_desc->addr_lo),
+ SDHCI_DUMP("%08llx: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ (unsigned long long)dma,
+ le32_to_cpu(dma_desc->addr_lo),
le16_to_cpu(dma_desc->len),
le16_to_cpu(dma_desc->cmd));
desc += host->desc_sz;
+ dma += host->desc_sz;
if (dma_desc->cmd & cpu_to_le16(ADMA2_END))
break;
@@ -2968,7 +2972,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
!= MMC_BUS_TEST_R)
host->data->error = -EILSEQ;
else if (intmask & SDHCI_INT_ADMA_ERROR) {
- pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
+ pr_err("%s: ADMA error: 0x%08x\n", mmc_hostname(host->mmc),
+ intmask);
sdhci_adma_show_error(host);
host->data->error = -EIO;
if (host->ops->adma_workaround)
@@ -3776,18 +3781,14 @@ int sdhci_setup_host(struct sdhci_host *host)
host->flags &= ~SDHCI_USE_ADMA;
}
- /*
- * It is assumed that a 64-bit capable device has set a 64-bit DMA mask
- * and *must* do 64-bit DMA. A driver has the opportunity to change
- * that during the first call to ->enable_dma(). Similarly
- * SDHCI_QUIRK2_BROKEN_64_BIT_DMA must be left to the drivers to
- * implement.
- */
if (sdhci_can_64bit_dma(host))
host->flags |= SDHCI_USE_64_BIT_DMA;
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
- ret = sdhci_set_dma_mask(host);
+ if (host->ops->set_dma_mask)
+ ret = host->ops->set_dma_mask(host);
+ else
+ ret = sdhci_set_dma_mask(host);
if (!ret && host->ops->enable_dma)
ret = host->ops->enable_dma(host);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index a29c4cd2d92e56a0b919b12c6623ba7e47a5baf9..0ed3e0eaef5f99e09ac1e299264983d9925a38dc 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -622,6 +622,7 @@ struct sdhci_ops {
u32 (*irq)(struct sdhci_host *host, u32 intmask);
+ int (*set_dma_mask)(struct sdhci_host *host);
int (*enable_dma)(struct sdhci_host *host);
unsigned int (*get_max_clock)(struct sdhci_host *host);
unsigned int (*get_min_clock)(struct sdhci_host *host);