Add support for the Acer Chromebook 514 CP514-2H, powered by MediaTek
Kompanio 820 (MT8192). This machine uses a MT6359 PMIC, with RT1015P as
speaker codec and RT5682 as headphone codec.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

BugLink: https://github.com/alsa-project/alsa-ucm-conf/issues/214


Signed-off-by: Jaroslav Kysela <perex@perex.cz>

LENOVO YOGA C630 has MultiMedia1 dai setup as primary Playback so add required
HiFi configuration as well.

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/88


Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/187


Signed-off-by: Christophe Henry <contact@c-henry.fr>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Add support for the Acer Chromebook Spin 513 CP513-2H, powered
by MediaTek Kompanio 1380 (MT8195) with a HiFi 4 Audio DSP running
SoundOpenFirmware.
This machine uses MT6359 PMIC, with RT1019 and RT5682 as headphones
and speaker codecs/amps.

This configuration has been successfully tested on Debian 11
with PipeWire 0.3.56 + wireplumber.

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/213


Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Fixes: https://github.com/alsa-project/alsa-ucm-conf/issues/212


Signed-off-by: Jaroslav Kysela <perex@perex.cz>

BugLink: https://github.com/alsa-project/alsa-ucm-conf/issues/172


Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Fixes: https://github.com/alsa-project/alsa-ucm-conf/issues/147


Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

USB 0db0:1feb - MSI Edge Wifi Z690

BugLink: https://github.com/alsa-project/alsa-ucm-conf/issues/210


Signed-off-by: Jaroslav Kysela <perex@perex.cz>

BugLink: https://github.com/alsa-project/alsa-ucm-conf/issues/210


Signed-off-by: Jaroslav Kysela <perex@perex.cz>

BugLink: https://github.com/alsa-project/alsa-ucm-conf/issues/210


Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

BugLink: https://github.com/alsa-project/alsa-ucm-conf/issues/189


Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Speaker and headphone work.
Headset mic works.

Automatic detection of headset/headphone work with additional kernel
changes to remap jack pins, queued for review at

https://github.com/thesofproject/linux/pull/3681

DMIC doesn't seem to work, but this could be because of the 4ch
capture. We need the ability to extract 2ch as done by CRAS with

CaptureChannelMap "0 0 -1 -1 -1 -1 -1 -1 -1 -1 -1"

BugLink: https://github.com/alsa-project/alsa-ucm-conf/pull/150


Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/207


Signed-off-by: Kacper Michajłow <kasper93@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/188


From: Eiseiche <108142668+Eiseiche@users.noreply.github.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/203


Signed-off-by: Patrick Lang <patrick.lang@sdf.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Fix for ALC4080 (ASUS ROG Strix B660-F Gaming WiFi)

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/206


From: Roman Averin <124546+RomanAverin@users.noreply.github.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Very similar to c710aa0e, but
this board only has 3 devices, Mic, Line-Out and Line-In. Thus
we are using the same conf. Mainly enabling the Mic by default,
but we also need to disable the unused devices from the MSI
MPG X570S Max WiFi.

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/196


Signed-off-by: 13r0ck <bnr@tuta.io>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Based on alsa-info.sh output, this is a complete cleanup for the ALC4080
codecs. The simple mixer controls names are fixed based on the amixer
output contents. Because I cannot test those changes directly with hardware,
please, create an issue or pull request to fix the possible regressions.

PCM playback devices: 0,1,2,3
PCM capture devices: 0,1,2
Simple playback mixer controls: 'PCM',0  8ch
                                'PCM',1  2ch
                                'PCM',2  mono
Simple capture mixer controls: 'Line',0  2ch
                               'Mic',0   2ch
                               'Analog In',0   2ch
Jacks: 'Speaker - Output Jack'
       'Headphone - Output Jack'
       'Mic - Input Jack'
       'Line - Input Jack'
       'Analog In - Input Jack'

Alsa-info: https://launchpadlibrarian.net/573795872/AlsaInfo.txt
	   MAG X570S TORPEDO MAX (MS-7D54) USB0db0:a073
Alsa-info: https://github.com/alsa-project/alsa-ucm-conf/files/9078972/alsa-info.txt
	   MAG X570S TOMAHAWK MAX WIFI (MS-7D54) USB0db0:a073
Alsa-info: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/uploads/8fb28cc3c7f98c642d0d1f0e8521dc49/alsa-info.txt
	   MPG Z690 EDGE WIFI DDR4 (MS-7D31) USB0db0:1feb
Alsa-info: http://alsa-project.org/db/?f=131d4da535c4ec4545c74616f83f393f1c9152dd


	   ROG STRIX Z590-F GAMING WIFI USB0b05:1996

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

There was missing bracket.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

BugLink: https://github.com/alsa-project/alsa-ucm-conf/issues/192


Signed-off-by: Jaroslav Kysela <perex@perex.cz>

The value of 124 used for FU02 is way too much, with saturation even in low-volume cases. The 0dB value (47) is a much better initialization value.

BugLink: https://github.com/thesofproject/linux/issues/3766
Resolves: https://github.com/alsa-project/alsa-ucm-conf/pull/193


Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

MOTU M2 and M4 has similiar USB ID. Use the long card name to
identify the M4 variant.

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/191
Fixes: https://github.com/alsa-project/alsa-ucm-conf/issues/190


Signed-off-by: Thomas Weisshaar <thomas.weisshaar@proton.me>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

- add "all switches (devices) off" to the verb's enable sequence
- reshuffle positions of device enable/disable sequences in HiFi.conf
- add missing newline to the end of file

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/173


Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/173


Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/173


Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/173


Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/173


Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

We already use

		CaptureSwitch "rt711 FU0F Capture Switch"
		CaptureVolume "rt711 FU0F Capture Volume"

but the enable/disable sequences used the SOF 'PGA2.0 2 Master Capture
Switch'

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/180


Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

When possible, it's better to use the codec volume and switch. The
firmware PGA is provided mostly for testing.

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/180


Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

This is a small DJ mixer with a main output and a monitor output.
The outputs appear as a single subdevice, we use the SplitPCM macros to
present separate outputs.

Link: https://www.native-instruments.com/en/products/traktor/dj-controllers/traktor-kontrol-z1/specifications/
Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/176


Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Allow DirectCaptureChannels or DirectPlaybackChannels to be left
undefined.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

I recently added support for these to Linux, see
https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git/commit/?id=4b8ea38fabab45ad911a32a336416062553dfe9c

Fixes: https://github.com/alsa-project/alsa-ucm-conf/pull/185


Signed-off-by: Jan Schär <jan@jschaer.ch>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Set the period time to 20ms and buffer time to 500ms by default.
For USB devices, use the period time 10ms for the better latency.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

The USB driver has two variants for the PCM control
names:

  UMC204HD 192k Output Playback Switch / Volume
    and
  PCM Playback Switch / Volume

BugLink: https://github.com/alsa-project/alsa-ucm-conf/issues/177


Signed-off-by: Jaroslav Kysela <perex@perex.cz>