hello

hello (2.10-2) unstable; urgency=medium
.
  * Fix version skew. Closes: #928887.
  * Drop debian/compat and use new syntax to specify compat level.
  * Standards-Version: 4.3.0 (no changes for this).
  * Rules-Requires-Root: no
.
hello (2.10-1) unstable; urgency=low
.
  * New upstream release.
  * debian/patches: Drop 01-fix-i18n-of-default-message, no longer needed.
  * debian/patches: Drop 99-config-guess-config-sub, no longer needed.
  * debian/rules: Drop override_dh_auto_build hack, no longer needed.
  * Standards-Version: 3.9.6 (no changes for this).
.
hello (2.9-2) unstable; urgency=low
.
  * Apply patch from Reuben Thomas to fix i18n of default message.
    This is upstream commit c4aed00. Closes: #767172.
  * The previous change in src/hello.c trigger a rebuild of man/hello.1
    that we don't need. Add a "touch man/hello.1" to avoid it.
  * Use Breaks: hello-debhelper (<< 2.9), not Conflicts,
    as hello-debhelper is deprecated.
  * Restore simple watch file from old hello package that was lost
    when the packages were renamed.
  * Update 99-config-guess-config-sub patch.
.
hello (2.9-1) unstable; urgency=low
.
  * New upstream release. Closes: #744195.
  * Source now contains README-dev. Closes: #621716.
  * Reworded short description.
  * Renamed source and binary from "hello-debhelper" to "hello".
  * The hello package will be renamed to "hello-traditional".
  * The file debian/rules is now the one using dh.
  * Added appropriate Conflicts/Replaces.
  * Raised priority to "optional".
  * Standards-Version: 3.9.5.
.
hello-debhelper (2.8-1) unstable; urgency=low
.
  * New upstream release.
  * Increase debhelper compatibility level to 9.
  * Dropped CFLAGS stuff, debhelper already takes care of that.
  * Dropped dh_auto_clean as it does no longer work. Just make distclean
    if there is a Makefile. Added override_dh_auto_clean to dh version.
  * Dropped patch 01-no-usr-share-info-dir-gz. No longer needed
    when using debhelper >= 9.20120311 with a source package created
    with a recent automake which supports AM_UPDATE_INFO_DIR.
  * Updated Build-Depends accordingly.
.
hello-debhelper (2.7-3) unstable; urgency=low
.
  * Get CFLAGS from dpkg-buildflags.
  * Drop -g as it's provided by dpkg-buildflags. Add -Wall as it's not.
  * Drop noopt handling, dpkg-buildflags already takes care of that.
  * Added "dh_installdocs NEWS" to dh version to sync with non-dh one.
.
hello-debhelper (2.7-2) unstable; urgency=low
.
  * Added recommended targets build-arch and build-indep.
  * Standards-Version: 3.9.2.
.
hello-debhelper (2.7-1) unstable; urgency=low
.
  * New upstream release.
.
hello-debhelper (2.6-2) unstable; urgency=medium
.
  * Use debhelper compatibility level 8, the new recommended mode.
.
hello-debhelper (2.6-1) unstable; urgency=low
.
  * New upstream release.
  * Switch to 3.0 (quilt) source format. Closes: #574878.
  * Added a note to debian/rules about the new dh syntax.
  * Standards-Version: 3.9.1 (no special changes for this).
.
hello-debhelper (2.5-1) unstable; urgency=low
.
  * New upstream release.
  * Added homepage field to control file.
  * Added cross-compilation support, using the new dh_auto_* commands
    from debhelper 7. Thanks a lot to Colin Watson. Closes: #550328.
  * Standards-Version: 3.8.4 (no special changes for this).
.
hello-debhelper (2.4-3) unstable; urgency=low
.
  * Modified doc/Makefile.in to avoid /usr/share/info/dir.gz.
.
hello-debhelper (2.4-2) unstable; urgency=low
.
  * Handle info files using dh_installinfo and ${misc:Depends}.
  * Removed debian/prerm and debian/postinst, no longer needed.
  * Standards-Version: 3.8.3.
.
hello-debhelper (2.4-1) unstable; urgency=low
.
  * New upstream release. Manual is back.
  * Standards-Version: 3.8.2 (no changes for this).
.
hello-debhelper (2.2-3) unstable; urgency=low
.
  * Run "make distclean" only if Makefile exists, but do not ignore errors.
  * Use debhelper compatibility level 7, as that's the level newly
    created packages are supposed to use.
.
hello-debhelper (2.2-2) unstable; urgency=low
.
  * Removed dh_testroot call, as it's not debian/rules job.
.
hello-debhelper (2.2-1) unstable; urgency=low
.
  * New upstream release.
  * Repackaged source taken from hello package.
  * Removed prerm and postinst, as info files are missing now.
.
hello-debhelper (2.1.1-4) unstable; urgency=low
.
  * Removed dh_testdir from debian/rules, as it is not very useful.
  * Standards-Version: 3.7.2 (no changes for this).
  * Updated config.guess and config.sub.
  * Use debhelper compatibility level 5, as that's the level newly
    created packages are supposed to use.
.
hello-debhelper (2.1.1-3) unstable; urgency=low
.
  * Created debian/compat with "4" as contents.
  * Build-Depends: debhelper (>= 4) accordingly.
  * Things are now installed in debian/hello-debhelper, not debian/tmp.
  * Updated config.guess and config.sub for GNU/K*BSD.
.
hello-debhelper (2.1.1-2) unstable; urgency=low
.
  * The "Ockham's Razor" release.
  * Modified Makefile.in to make sure that install-info is never called
    during the build. This is a workaroud for an automake bug which makes
    packages to contain /usr/share/info/dir.gz.
  * Removed misleading comment at the top of debian/rules, this one is
    a complete rewrite, not a modification, from the hello debian/rules.
  * Removed debian/rules commented out calls to dh_* tools. Some of them
    (like dh_suidregister) were deprecated, others (like dh_dirsizes)
    do not even exist now. Use dh_make (from the dh-make package) if you
    want a debian/rules full of comments.
  * Removed build-arch and build-indep targets, there was a circular
    dependency between them and the build target and IMHO this should not be
    a full tutorial on writing debian/rules but a simple example instead.
  * Removed install-arch and install-indep targets, for the same reason.
  * Made install target to depend on the build target, as it should be.
  * Standards-Version: 3.6.1 (no changes required for this).
.
hello-debhelper (2.1.1-1) unstable; urgency=low
.
  * New upstream release. GNU hello now says `Hello, world!' in a lot of
    different languages, using gettext. See the NEWS file for details.
  * Fixed spelling error in extended description (Closes: #124734).
  * The upstream source now contains install-sh (Closes: #59162).
  * The info file is now installed under the "Development" section.
  * It already has a description, so --description isn't used anymore.
  * Removed deprecated emacs stuff from the Debian changelog.
  * Removed debian/hello.1, since there is now an upstream manpage.
  * Downgraded priority to extra, since it conflicts with hello which
    is optional. In fact, this package is only useful to be apt-get sourced.
  * Standards-Version: 3.5.7:
  - Added support for noopt in DEB_BUILD_OPTIONS
    (dh_strip already cares about nostrip).
  - Removed #DEBHELPER# from prerm and postinst since it was only useful
    for the doc symlinks, which we don't want to manage anymore.
  - Build-Depends: debhelper.
  * New maintainer (thanks, Adam).
.
hello-debhelper (1.3-18) unstable; urgency=low
.
  * Made all binary targets depend eventually on build.  Closes: #57650.
.
hello-debhelper (1.3-17) frozen unstable; urgency=low
.
  * Changed description, so that it described the differences
    between the normal version of hello and this.  Closes: #50590.
  * Changed the location of the gpl in the copyright.
.
hello-debhelper (1.3-16) unstable; urgency=low
.
  * Added build depends.
  * Added #DEBHELPER# to postinst and prerm(blush).
  * Now, thanks to debhelper, the /usr/doc -> ../share/doc symlinks
    are created.
.
hello-debhelper (1.3-15) unstable; urgency=low
.
  * Updated to standards version 3.0.1.0, and now FHS compliant.
.
hello-debhelper (1.3-14.3) unstable; urgency=low
.
  * Split and ported to debhelper, so that it can be a learning
    experience by comparing the normal and enhanced way of doing
    things.
  * This version parallels hello 1.3-14.3.
.
hello (1.3-14.2) unstable; urgency=low
.
  * Yet another non-maintainer release
  * Removed source and diff targets (#14601). I'm not removing the comment
    (which would fix #14602) as it's harmless and slightly interesting IMO.
  * Fixed calling of make install; I ignored this bug last time as I didn't
    understand it. Having realised what it meant, I agree that it needed
    changing (#4967)
.
hello (1.3-14.1) unstable; urgency=low
.
  * Non-maintainer release
  * Remove section and priority lines for binary, i.e. undoing the
    "fix" for the non-bug #4816
  * Yes, I do know that the previous release should have been numbered
    1.3-13.1
.
hello (1.3-14) unstable; urgency=low
.
  * Non-maintainer release
  * Add section and priority lines for binary (#4816)
  * Change comment in debian/rules (#4968)
  * Remove debian/substvars on clean (#4371)
  * Fix hang when looking for mailbox (#4375)
  * Search FSSTND and FHS locations for mail
  * Compile for libc6
.
hello (1.3-13) unstable; urgency=low
.
  * Updated to Standards-Version 2.1.1.0 (no changes required).
  * Changed maintainer email address.
.
hello (1.3-12) unstable; urgency=low
.
  * Added Debian and upstream changelogs to binary package.
  * Updated to Standards-Version 2.1.0.0.
.
hello (1.3-11) unstable; urgency=low
.
  * Maintainer scripts now `set -e' (even though only 1 command in each).
  * debian/rules has separate binary, binary-arch, binary-indep targets.
.
hello (1.3-10) experimental; urgency=low
.
  * Use new shared library dependencies and dpkg-gencontrol scheme.
  * `source' and `diff' removed from .PHONY and now print message.
.
hello (1.3-9) experimental; urgency=LOW
.
  * changelog specifies `debian-changelog-mode', not `dpkg-...'.
  * Comment in debian/rules re missing (obsolete) `source', `diff' &c.
.
hello (1.3-8) experimental; urgency=LOW
.
  * debian/changelog has local variables section to set Emacs mode.
  * debian/rules mkdir replaced with install -d for consistency.
  * debian/rules INSTALL setting to use -s changed to INSTALL_PROGRAM.
.
hello (1.3-7) experimental; urgency=LOW
.
  * Changed to new source packing scheme.