With multipath enabled, nvme_scan_work() can read from the device
(through nvme_mpath_add_disk()) and hang [1]. However, with fabrics,
once ctrl->state is set to NVME_CTRL_DELETING, the reads will hang
(see nvmf_check_ready()) and the mpath stack device make_request
will block if head->list is not empty. However, when the head->list
consistst of only DELETING/DEAD controllers, we should actually not
block, but rather fail immediately.

In addition, before we go ahead and remove the namespaces, make sure
to clear the current path and kick the requeue list so that the
request will fast fail upon requeuing.

[1]:
--
  INFO: task kworker/u4:3:166 blocked for more than 120 seconds.
        Not tainted 5.2.0-rc6-vmlocalyes-00005-g808c8c2dc0cf #316
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  kworker/u4:3    D    0   166      2 0x80004000
  Workqueue: nvme-wq nvme_scan_work
  Call Trace:
   __schedule+0x851/0x1400
   schedule+0x99/0x210
   io_schedule+0x21/0x70
   do_read_cache_page+0xa57/0x1330
   read_cache_page+0x4a/0x70
   read_dev_sector+0xbf/0x380
   amiga_partition+0xc4/0x1230
   check_partition+0x30f/0x630
   rescan_partitions+0x19a/0x980
   __blkdev_get+0x85a/0x12f0
   blkdev_get+0x2a5/0x790
   __device_add_disk+0xe25/0x1250
   device_add_disk+0x13/0x20
   nvme_mpath_set_live+0x172/0x2b0
   nvme_update_ns_ana_state+0x130/0x180
   nvme_set_ns_ana_state+0x9a/0xb0
   nvme_parse_ana_log+0x1c3/0x4a0
   nvme_mpath_add_disk+0x157/0x290
   nvme_validate_ns+0x1017/0x1bd0
   nvme_scan_work+0x44d/0x6a0
   process_one_work+0x7d7/0x1240
   worker_thread+0x8e/0xff0
   kthread+0x2c3/0x3b0
   ret_from_fork+0x35/0x40

   INFO: task kworker/u4:1:1034 blocked for more than 120 seconds.
        Not tainted 5.2.0-rc6-vmlocalyes-00005-g808c8c2dc0cf #316
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  kworker/u4:1    D    0  1034      2 0x80004000
  Workqueue: nvme-delete-wq nvme_delete_ctrl_work
  Call Trace:
   __schedule+0x851/0x1400
   schedule+0x99/0x210
   schedule_timeout+0x390/0x830
   wait_for_completion+0x1a7/0x310
   __flush_work+0x241/0x5d0
   flush_work+0x10/0x20
   nvme_remove_namespaces+0x85/0x3d0
   nvme_do_delete_ctrl+0xb4/0x1e0
   nvme_delete_ctrl_work+0x15/0x20
   process_one_work+0x7d7/0x1240
   worker_thread+0x8e/0xff0
   kthread+0x2c3/0x3b0
   ret_from_fork+0x35/0x40
--

Reported-by: Logan Gunthorpe <logang@deltatee.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>