mesh.c 7.42 KB
Newer Older
1
#include <linux/ieee80211.h>
2
#include <linux/export.h>
3
#include <net/cfg80211.h>
4
#include "nl80211.h"
5
#include "core.h"
6
#include "rdev-ops.h"
7
8
9
10
11
12
13
14
15
16

/* Default values, timeouts in ms */
#define MESH_TTL 		31
#define MESH_DEFAULT_ELEMENT_TTL 31
#define MESH_MAX_RETR	 	3
#define MESH_RET_T 		100
#define MESH_CONF_T 		100
#define MESH_HOLD_T 		100

#define MESH_PATH_TIMEOUT	5000
17
#define MESH_RANN_INTERVAL      5000
18
19
#define MESH_PATH_TO_ROOT_TIMEOUT      6000
#define MESH_ROOT_INTERVAL     5000
20
#define MESH_ROOT_CONFIRMATION_INTERVAL 2000
21
22
23
24
25
26

/*
 * Minimum interval between two consecutive PREQs originated by the same
 * interface
 */
#define MESH_PREQ_MIN_INT	10
27
#define MESH_PERR_MIN_INT	100
28
29
#define MESH_DIAM_TRAVERSAL_TIME 50

30
31
#define MESH_RSSI_THRESHOLD	0

32
33
34
35
36
37
38
39
40
41
42
43
44
/*
 * A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds
 * before timing out.  This way it will remain ACTIVE and no data frames
 * will be unnecessarily held in the pending queue.
 */
#define MESH_PATH_REFRESH_TIME			1000
#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME)

/* Default maximum number of established plinks per interface */
#define MESH_MAX_ESTAB_PLINKS	32

#define MESH_MAX_PREQ_RETRIES	4

45
#define MESH_SYNC_NEIGHBOR_OFFSET_MAX 50
46
47
48
49
50
51
52
53
54
55

const struct mesh_config default_mesh_config = {
	.dot11MeshRetryTimeout = MESH_RET_T,
	.dot11MeshConfirmTimeout = MESH_CONF_T,
	.dot11MeshHoldingTimeout = MESH_HOLD_T,
	.dot11MeshMaxRetries = MESH_MAX_RETR,
	.dot11MeshTTL = MESH_TTL,
	.element_ttl = MESH_DEFAULT_ELEMENT_TTL,
	.auto_open_plinks = true,
	.dot11MeshMaxPeerLinks = MESH_MAX_ESTAB_PLINKS,
56
	.dot11MeshNbrOffsetMaxNeighbor = MESH_SYNC_NEIGHBOR_OFFSET_MAX,
57
58
	.dot11MeshHWMPactivePathTimeout = MESH_PATH_TIMEOUT,
	.dot11MeshHWMPpreqMinInterval = MESH_PREQ_MIN_INT,
59
	.dot11MeshHWMPperrMinInterval = MESH_PERR_MIN_INT,
60
61
62
63
	.dot11MeshHWMPnetDiameterTraversalTime = MESH_DIAM_TRAVERSAL_TIME,
	.dot11MeshHWMPmaxPREQretries = MESH_MAX_PREQ_RETRIES,
	.path_refresh_time = MESH_PATH_REFRESH_TIME,
	.min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT,
64
	.dot11MeshHWMPRannInterval = MESH_RANN_INTERVAL,
65
	.dot11MeshGateAnnouncementProtocol = false,
66
	.dot11MeshForwarding = true,
67
	.rssi_threshold = MESH_RSSI_THRESHOLD,
68
	.ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
69
70
	.dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT,
	.dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL,
71
	.dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL,
72
73
};

74
const struct mesh_setup default_mesh_setup = {
75
76
77
	/* cfg80211_join_mesh() will pick a channel if needed */
	.channel = NULL,
	.channel_type = NL80211_CHAN_NO_HT,
78
	.sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
79
80
	.path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP,
	.path_metric = IEEE80211_PATH_METRIC_AIRTIME,
81
82
	.ie = NULL,
	.ie_len = 0,
83
	.is_secure = false,
84
};
85
86
87

int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
			 struct net_device *dev,
88
			 struct mesh_setup *setup,
89
90
91
92
93
94
95
96
97
98
99
100
			 const struct mesh_config *conf)
{
	struct wireless_dev *wdev = dev->ieee80211_ptr;
	int err;

	BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN);

	ASSERT_WDEV_LOCK(wdev);

	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
		return -EOPNOTSUPP;

101
102
103
104
	if (!(rdev->wiphy.flags & WIPHY_FLAG_MESH_AUTH) &&
	      setup->is_secure)
		return -EOPNOTSUPP;

105
106
107
	if (wdev->mesh_id_len)
		return -EALREADY;

108
	if (!setup->mesh_id_len)
109
110
111
112
113
		return -EINVAL;

	if (!rdev->ops->join_mesh)
		return -EOPNOTSUPP;

114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
	if (!setup->channel) {
		/* if no channel explicitly given, use preset channel */
		setup->channel = wdev->preset_chan;
		setup->channel_type = wdev->preset_chantype;
	}

	if (!setup->channel) {
		/* if we don't have that either, use the first usable channel */
		enum ieee80211_band band;

		for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
			struct ieee80211_supported_band *sband;
			struct ieee80211_channel *chan;
			int i;

			sband = rdev->wiphy.bands[band];
			if (!sband)
				continue;

			for (i = 0; i < sband->n_channels; i++) {
				chan = &sband->channels[i];
				if (chan->flags & (IEEE80211_CHAN_NO_IBSS |
						   IEEE80211_CHAN_PASSIVE_SCAN |
						   IEEE80211_CHAN_DISABLED |
						   IEEE80211_CHAN_RADAR))
					continue;
				setup->channel = chan;
				break;
			}

			if (setup->channel)
				break;
		}

		/* no usable channel ... */
		if (!setup->channel)
			return -EINVAL;

		setup->channel_type = NL80211_CHAN_NO_HT;
	}

	if (!cfg80211_can_beacon_sec_chan(&rdev->wiphy, setup->channel,
					  setup->channel_type))
		return -EINVAL;

159
160
161
162
163
	err = cfg80211_can_use_chan(rdev, wdev, setup->channel,
				    CHAN_MODE_SHARED);
	if (err)
		return err;

164
	err = rdev_join_mesh(rdev, dev, conf, setup);
165
	if (!err) {
166
167
		memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
		wdev->mesh_id_len = setup->mesh_id_len;
168
		wdev->channel = setup->channel;
169
170
171
172
173
174
175
	}

	return err;
}

int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
		       struct net_device *dev,
176
		       struct mesh_setup *setup,
177
178
179
180
181
		       const struct mesh_config *conf)
{
	struct wireless_dev *wdev = dev->ieee80211_ptr;
	int err;

182
	mutex_lock(&rdev->devlist_mtx);
183
	wdev_lock(wdev);
184
	err = __cfg80211_join_mesh(rdev, dev, setup, conf);
185
	wdev_unlock(wdev);
186
	mutex_unlock(&rdev->devlist_mtx);
187
188
189
190

	return err;
}

191
192
193
194
195
int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
			   struct wireless_dev *wdev, int freq,
			   enum nl80211_channel_type channel_type)
{
	struct ieee80211_channel *channel;
196
	int err;
197

198
199
200
201
202
203
204
	channel = rdev_freq_to_chan(rdev, freq, channel_type);
	if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy,
						      channel,
						      channel_type)) {
		return -EINVAL;
	}

205
206
207
208
209
210
211
	/*
	 * Workaround for libertas (only!), it puts the interface
	 * into mesh mode but doesn't implement join_mesh. Instead,
	 * it is configured via sysfs and then joins the mesh when
	 * you set the channel. Note that the libertas mesh isn't
	 * compatible with 802.11 mesh.
	 */
212
213
214
	if (rdev->ops->libertas_set_mesh_channel) {
		if (channel_type != NL80211_CHAN_NO_HT)
			return -EINVAL;
215
216
217

		if (!netif_running(wdev->netdev))
			return -ENETDOWN;
218

219
220
221
222
223
		err = cfg80211_can_use_chan(rdev, wdev, channel,
					    CHAN_MODE_SHARED);
		if (err)
			return err;

224
225
		err = rdev_libertas_set_mesh_channel(rdev, wdev->netdev,
						     channel);
226
227
228
229
		if (!err)
			wdev->channel = channel;

		return err;
230
231
232
233
234
235
236
237
238
239
	}

	if (wdev->mesh_id_len)
		return -EBUSY;

	wdev->preset_chan = channel;
	wdev->preset_chantype = channel_type;
	return 0;
}

240
241
242
243
244
245
246
247
248
249
250
251
252
void cfg80211_notify_new_peer_candidate(struct net_device *dev,
		const u8 *macaddr, const u8* ie, u8 ie_len, gfp_t gfp)
{
	struct wireless_dev *wdev = dev->ieee80211_ptr;

	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_MESH_POINT))
		return;

	nl80211_send_new_peer_candidate(wiphy_to_dev(wdev->wiphy), dev,
			macaddr, ie, ie_len, gfp);
}
EXPORT_SYMBOL(cfg80211_notify_new_peer_candidate);

253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
				 struct net_device *dev)
{
	struct wireless_dev *wdev = dev->ieee80211_ptr;
	int err;

	ASSERT_WDEV_LOCK(wdev);

	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
		return -EOPNOTSUPP;

	if (!rdev->ops->leave_mesh)
		return -EOPNOTSUPP;

	if (!wdev->mesh_id_len)
		return -ENOTCONN;

270
	err = rdev_leave_mesh(rdev, dev);
271
	if (!err) {
272
		wdev->mesh_id_len = 0;
273
274
275
		wdev->channel = NULL;
	}

276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
	return err;
}

int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
			struct net_device *dev)
{
	struct wireless_dev *wdev = dev->ieee80211_ptr;
	int err;

	wdev_lock(wdev);
	err = __cfg80211_leave_mesh(rdev, dev);
	wdev_unlock(wdev);

	return err;
}