Fix the following CallTrace:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 71 PID: 1 Comm: swapper/0 Not tainted 4.8.8-WR9.0.0.1_standard #11
Hardware name: Intel Corporation S2600WTT/S2600WTT,
BIOS GRNDSDP1.86B.0036.R05.1407140519 07/14/2014
 00200086 00200086 eb5e1ab8 c144dd70 00000000 00000000 eb5e1af8 c10af89a
 c1d23de4 eb5e1af8 00000009 eb5d8600 eb5d8638 eb5e1af8 c10b14d8 00000009
 0000000a c1d32911 00000000 00000000 e44c826c eb5d8000 eb5e1b74 c10b214e
Call Trace:
 [<c144dd70>] dump_stack+0x5f/0x8f
 [<c10af89a>] register_lock_class+0x25a/0x4c0
 [<c10b14d8>] ? check_irq_usage+0x88/0xc0
 [<c10b214e>] __lock_acquire+0x5e/0x17a0
 [<c1abdb9b>] ? _raw_spin_unlock_irqrestore+0x3b/0x70
 [<c10cf14a>] ? rcu_read_lock_sched_held+0x8a/0x90
 [<c10b3c5f>] lock_acquire+0x9f/0x1f0
 [<c1922dcf>] ? dev_get_stats+0x5f/0x110
 [<c176e6b3>] ixgbe_get_stats64+0x113/0x320
 [<c1922dcf>] ? dev_get_stats+0x5f/0x110
 [<c1922dcf>] dev_get_stats+0x5f/0x110
 [<c1ab5415>] rtnl_fill_stats+0x40/0x105
 [<c193dd45>] rtnl_fill_ifinfo+0x4c5/0xd20
 [<c11c5115>] ? __kmalloc_node_track_caller+0x1a5/0x410
 [<c1917487>] ? __kmalloc_reserve.isra.42+0x27/0x80
 [<c191754f>] ? __alloc_skb+0x6f/0x270
 [<c1942291>] rtmsg_ifinfo_build_skb+0x71/0xd0
 [<c194230a>] rtmsg_ifinfo.part.23+0x1a/0x50
 [<c1923dad>] ? call_netdevice_notifiers_info+0x2d/0x60
 [<c194236b>] rtmsg_ifinfo+0x2b/0x40
 [<c192f997>] register_netdevice+0x3d7/0x4d0
 [<c192faa7>] register_netdev+0x17/0x30
 [<c177b83d>] ixgbe_probe+0x118d/0x1610
 [<c1498202>] local_pci_probe+0x32/0x80
 [<c1498172>] ? pci_match_device+0xd2/0x100
 [<c14991e0>] pci_device_probe+0xc0/0x110
 [<c1652cc5>] driver_probe_device+0x1c5/0x280
 [<c1498172>] ? pci_match_device+0xd2/0x100
 [<c1652e09>] __driver_attach+0x89/0x90
 [<c1652d80>] ? driver_probe_device+0x280/0x280
 [<c165114f>] bus_for_each_dev+0x4f/0x80
 [<c165269e>] driver_attach+0x1e/0x20
 [<c1652d80>] ? driver_probe_device+0x280/0x280
 [<c1652317>] bus_add_driver+0x1a7/0x220
 [<c1653a79>] driver_register+0x59/0xe0
 [<c1f897b8>] ? igb_init_module+0x49/0x49
 [<c1497b2a>] __pci_register_driver+0x4a/0x50
 [<c1f8985d>] ixgbe_init_module+0xa5/0xc4
 [<c1000485>] do_one_initcall+0x35/0x150
 [<c107e818>] ? parameq+0x18/0x70
 [<c1f395d8>] ? repair_env_string+0x12/0x51
 [<c107ead0>] ? parse_args+0x260/0x3b0
 [<c1074f73>] ? __usermodehelper_set_disable_depth+0x43/0x50
 [<c1f39e90>] kernel_init_freeable+0x19b/0x267
 [<c1f395c6>] ? set_debug_rodata+0xf/0xf
 [<c10b1e7b>] ? trace_hardirqs_on+0xb/0x10
 [<c1abdc02>] ? _raw_spin_unlock_irq+0x32/0x50
 [<c1085f0b>] ? finish_task_switch+0xab/0x1f0
 [<c1085ec9>] ? finish_task_switch+0x69/0x1f0
 [<c1ab6a30>] kernel_init+0x10/0x110
 [<c108bd65>] ? schedule_tail+0x25/0x80
 [<c1abe422>] ret_from_kernel_thread+0xe/0x24
 [<c1ab6a20>] ? rest_init+0x130/0x130

This CallTrace occurred on 32-bit kernel with CONFIG_PROVE_LOCKING
enabled.

This happens at ixgbe driver probe hardware stage, when comes to
ixgbe_get_stats64, the seqcount/seqlock still not initialize, although
this was initialize in TX/RX resources setup routin, but it was too late,
then lockdep give this Warning.

To fix this, move the u64_stats_init function to driver probe stage,
which before we get the status of seqcount and after the RX/TX ring
was finished init.

Signed-off-by: Liwei Song <liwei.song@windriver.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>