Commit 85f90cf6 authored by Andres Salomon's avatar Andres Salomon
Browse files

x86: OLPC: switch over to using new EC driver on x86



This uses the new EC driver framework in drivers/platform/olpc.  The
XO-1 and XO-1.5-specific code is still in arch/x86, but the generic stuff
(including a new workqueue; no more running EC commands with IRQs disabled!)
can be shared with other architectures.
Signed-off-by: default avatarAndres Salomon <dilinger@queued.net>
Acked-by: default avatarPaul Fox <pgf@laptop.org>
Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent d278b7a2
......@@ -100,11 +100,6 @@ extern void olpc_xo1_pm_wakeup_clear(u16 value);
extern int pci_olpc_init(void);
/* EC related functions */
extern int olpc_ec_cmd_x86(unsigned char cmd, unsigned char *inbuf,
size_t inlen, unsigned char *outbuf, size_t outlen);
/* SCI source values */
#define EC_SCI_SRC_EMPTY 0x00
......
......@@ -14,7 +14,6 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/string.h>
#include <linux/platform_device.h>
......@@ -32,8 +31,6 @@
struct olpc_platform_t olpc_platform_info;
EXPORT_SYMBOL_GPL(olpc_platform_info);
static DEFINE_SPINLOCK(ec_lock);
/* debugfs interface to EC commands */
#define EC_MAX_CMD_ARGS (5 + 1) /* cmd byte + 5 args */
#define EC_MAX_CMD_REPLY (8)
......@@ -126,16 +123,13 @@ static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
* <http://wiki.laptop.org/go/Ec_specification>. Unfortunately, while
* OpenFirmware's source is available, the EC's is not.
*/
int olpc_ec_cmd_x86(unsigned char cmd, unsigned char *inbuf, size_t inlen,
unsigned char *outbuf, size_t outlen)
static int olpc_xo1_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf,
size_t outlen, void *arg)
{
unsigned long flags;
int ret = -EIO;
int i;
int restarts = 0;
spin_lock_irqsave(&ec_lock, flags);
/* Clear OBF */
for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++)
inb(0x68);
......@@ -199,10 +193,8 @@ int olpc_ec_cmd_x86(unsigned char cmd, unsigned char *inbuf, size_t inlen,
ret = 0;
err:
spin_unlock_irqrestore(&ec_lock, flags);
return ret;
}
EXPORT_SYMBOL_GPL(olpc_ec_cmd_x86);
void olpc_ec_wakeup_set(u16 value)
{
......@@ -366,7 +358,7 @@ static void setup_debugfs(void)
&ec_debugfs_genops);
}
static int olpc_ec_suspend(void)
static int olpc_ec_suspend(struct platform_device *pdev)
{
return olpc_ec_mask_write(ec_wakeup_mask);
}
......@@ -425,8 +417,28 @@ static int __init add_xo1_platform_devices(void)
return 0;
}
static struct syscore_ops olpc_syscore_ops = {
static int olpc_xo1_ec_probe(struct platform_device *pdev)
{
/* get the EC revision */
olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
(unsigned char *) &olpc_platform_info.ecver, 1);
/* EC version 0x5f adds support for wide SCI mask */
if (olpc_platform_info.ecver >= 0x5f)
olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI;
pr_info("OLPC board revision %s%X (EC=%x)\n",
((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
olpc_platform_info.boardrev >> 4,
olpc_platform_info.ecver);
return 0;
}
static struct olpc_ec_driver ec_xo1_driver = {
.suspend = olpc_ec_suspend,
.probe = olpc_xo1_ec_probe,
.ec_cmd = olpc_xo1_ec_cmd,
};
static int __init olpc_init(void)
......@@ -436,16 +448,14 @@ static int __init olpc_init(void)
if (!olpc_ofw_present() || !platform_detect())
return 0;
spin_lock_init(&ec_lock);
/* register the XO-1 and 1.5-specific EC handler */
olpc_ec_driver_register(&ec_xo1_driver, NULL);
platform_device_register_simple("olpc-ec", -1, NULL, 0);
/* assume B1 and above models always have a DCON */
if (olpc_board_at_least(olpc_board(0xb1)))
olpc_platform_info.flags |= OLPC_F_DCON;
/* get the EC revision */
olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
(unsigned char *) &olpc_platform_info.ecver, 1);
#ifdef CONFIG_PCI_OLPC
/* If the VSA exists let it emulate PCI, if not emulate in kernel.
* XO-1 only. */
......@@ -453,14 +463,6 @@ static int __init olpc_init(void)
!cs5535_has_vsa2())
x86_init.pci.arch_init = pci_olpc_init;
#endif
/* EC version 0x5f adds support for wide SCI mask */
if (olpc_platform_info.ecver >= 0x5f)
olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI;
printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
olpc_platform_info.boardrev >> 4,
olpc_platform_info.ecver);
if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) { /* XO-1 */
r = add_xo1_platform_devices();
......@@ -468,7 +470,6 @@ static int __init olpc_init(void)
return r;
}
register_syscore_ops(&olpc_syscore_ops);
setup_debugfs();
return 0;
......
......@@ -113,11 +113,6 @@ int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf, size_t outlen)
struct olpc_ec_priv *ec = ec_priv;
struct ec_cmd_desc desc;
/* XXX: this will be removed in later patches */
/* Are we using old-style callers? */
if (!ec_driver || !ec_driver->ec_cmd)
return olpc_ec_cmd_x86(cmd, inbuf, inlen, outbuf, outlen);
/* Ensure a driver and ec hook have been registered */
if (WARN_ON(!ec_driver || !ec_driver->ec_cmd))
return -ENODEV;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment