Commit 93da9cc1 authored by colin@cozybit.com's avatar colin@cozybit.com Committed by John W. Linville
Browse files

Add nl80211 commands to get and set o11s mesh networking parameters



The two new commands are NL80211_CMD_GET_MESH_PARAMS and
NL80211_CMD_SET_MESH_PARAMS. There is a new attribute enum,
NL80211_ATTR_MESH_PARAMS, which enumerates the various mesh configuration
parameters.

Moved struct mesh_config from mac80211/ieee80211_i.h to net/cfg80211.h.
nl80211_get_mesh_params and nl80211_set_mesh_params unpack the netlink messages
and ask the driver to get or set the configuration.  This is done via two new
function stubs, get_mesh_params and set_mesh_params, in struct cfg80211_ops.
Signed-off-by: default avatarColin McCabe <colin@cozybit.com>
Acked-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 4a68ec53
......@@ -106,6 +106,12 @@
* to the the specified ISO/IEC 3166-1 alpha2 country code. The core will
* store this as a valid request and then query userspace for it.
*
* @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the
* interface identified by %NL80211_ATTR_IFINDEX
*
* @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
* interface identified by %NL80211_ATTR_IFINDEX
*
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
......@@ -148,6 +154,9 @@ enum nl80211_commands {
NL80211_CMD_SET_REG,
NL80211_CMD_REQ_SET_REG,
NL80211_CMD_GET_MESH_PARAMS,
NL80211_CMD_SET_MESH_PARAMS,
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
......@@ -296,6 +305,8 @@ enum nl80211_attrs {
NL80211_ATTR_REG_ALPHA2,
NL80211_ATTR_REG_RULES,
NL80211_ATTR_MESH_PARAMS,
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
......@@ -606,4 +617,79 @@ enum nl80211_mntr_flags {
NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
};
/**
* enum nl80211_meshconf_params - mesh configuration parameters
*
* Mesh configuration parameters
*
* @__NL80211_MESHCONF_INVALID: internal use
*
* @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
* millisecond units, used by the Peer Link Open message
*
* @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in
* millisecond units, used by the peer link management to close a peer link
*
* @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
* millisecond units
*
* @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
* on this mesh interface
*
* @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
* open retries that can be sent to establish a new peer link instance in a
* mesh
*
* @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
* point.
*
* @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
* open peer links when we detect compatible mesh peers.
*
* @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
* containing a PREQ that an MP can send to a particular destination (path
* target)
*
* @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
* (in milliseconds)
*
* @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
* until giving up on a path discovery (in milliseconds)
*
* @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
* points receiving a PREQ shall consider the forwarding information from the
* root to be valid. (TU = time unit)
*
* @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
* TUs) during which an MP can send only one action frame containing a PREQ
* reference element
*
* @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
* that it takes for an HWMP information element to propagate across the mesh
*
* @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
*
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
*/
enum nl80211_meshconf_params {
__NL80211_MESHCONF_INVALID,
NL80211_MESHCONF_RETRY_TIMEOUT,
NL80211_MESHCONF_CONFIRM_TIMEOUT,
NL80211_MESHCONF_HOLDING_TIMEOUT,
NL80211_MESHCONF_MAX_PEER_LINKS,
NL80211_MESHCONF_MAX_RETRIES,
NL80211_MESHCONF_TTL,
NL80211_MESHCONF_AUTO_OPEN_PLINKS,
NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
NL80211_MESHCONF_PATH_REFRESH_TIME,
NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
/* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST,
NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
};
#endif /* __LINUX_NL80211_H */
......@@ -347,6 +347,25 @@ struct ieee80211_regdomain {
.flags = reg_flags, \
}
struct mesh_config {
/* Timeouts in ms */
/* Mesh plink management parameters */
u16 dot11MeshRetryTimeout;
u16 dot11MeshConfirmTimeout;
u16 dot11MeshHoldingTimeout;
u16 dot11MeshMaxPeerLinks;
u8 dot11MeshMaxRetries;
u8 dot11MeshTTL;
bool auto_open_plinks;
/* HWMP parameters */
u8 dot11MeshHWMPmaxPREQretries;
u32 path_refresh_time;
u16 min_discovery_timeout;
u32 dot11MeshHWMPactivePathTimeout;
u16 dot11MeshHWMPpreqMinInterval;
u16 dot11MeshHWMPnetDiameterTraversalTime;
};
/* from net/wireless.h */
struct wiphy;
......@@ -397,6 +416,12 @@ struct wiphy;
*
* @change_station: Modify a given station.
*
* @get_mesh_params: Put the current mesh parameters into *params
*
* @set_mesh_params: Set mesh parameters.
* The mask is a bitfield which tells us which parameters to
* set, and which to leave alone.
*
* @set_mesh_cfg: set mesh parameters (by now, just mesh id)
*
* @change_bss: Modify parameters for a given BSS.
......@@ -452,7 +477,12 @@ struct cfg80211_ops {
int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *dst, u8 *next_hop,
struct mpath_info *pinfo);
int (*get_mesh_params)(struct wiphy *wiphy,
struct net_device *dev,
struct mesh_config *conf);
int (*set_mesh_params)(struct wiphy *wiphy,
struct net_device *dev,
const struct mesh_config *nconf, u32 mask);
int (*change_bss)(struct wiphy *wiphy, struct net_device *dev,
struct bss_parameters *params);
};
......
......@@ -951,6 +951,72 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
rcu_read_unlock();
return 0;
}
static int ieee80211_get_mesh_params(struct wiphy *wiphy,
struct net_device *dev,
struct mesh_config *conf)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
return -ENOTSUPP;
memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config));
return 0;
}
static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask)
{
return (mask >> (parm-1)) & 0x1;
}
static int ieee80211_set_mesh_params(struct wiphy *wiphy,
struct net_device *dev,
const struct mesh_config *nconf, u32 mask)
{
struct mesh_config *conf;
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
return -ENOTSUPP;
/* Set the config options which we are interested in setting */
conf = &(sdata->u.mesh.mshcfg);
if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask))
conf->dot11MeshRetryTimeout = nconf->dot11MeshRetryTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_CONFIRM_TIMEOUT, mask))
conf->dot11MeshConfirmTimeout = nconf->dot11MeshConfirmTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HOLDING_TIMEOUT, mask))
conf->dot11MeshHoldingTimeout = nconf->dot11MeshHoldingTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_MAX_PEER_LINKS, mask))
conf->dot11MeshMaxPeerLinks = nconf->dot11MeshMaxPeerLinks;
if (_chg_mesh_attr(NL80211_MESHCONF_MAX_RETRIES, mask))
conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries;
if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask))
conf->dot11MeshTTL = nconf->dot11MeshTTL;
if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask))
conf->auto_open_plinks = nconf->auto_open_plinks;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask))
conf->dot11MeshHWMPmaxPREQretries =
nconf->dot11MeshHWMPmaxPREQretries;
if (_chg_mesh_attr(NL80211_MESHCONF_PATH_REFRESH_TIME, mask))
conf->path_refresh_time = nconf->path_refresh_time;
if (_chg_mesh_attr(NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, mask))
conf->min_discovery_timeout = nconf->min_discovery_timeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, mask))
conf->dot11MeshHWMPactivePathTimeout =
nconf->dot11MeshHWMPactivePathTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, mask))
conf->dot11MeshHWMPpreqMinInterval =
nconf->dot11MeshHWMPpreqMinInterval;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
mask))
conf->dot11MeshHWMPnetDiameterTraversalTime =
nconf->dot11MeshHWMPnetDiameterTraversalTime;
return 0;
}
#endif
static int ieee80211_change_bss(struct wiphy *wiphy,
......@@ -1007,6 +1073,8 @@ struct cfg80211_ops mac80211_config_ops = {
.change_mpath = ieee80211_change_mpath,
.get_mpath = ieee80211_get_mpath,
.dump_mpath = ieee80211_dump_mpath,
.set_mesh_params = ieee80211_set_mesh_params,
.get_mesh_params = ieee80211_get_mesh_params,
#endif
.change_bss = ieee80211_change_bss,
};
......@@ -23,6 +23,7 @@
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/etherdevice.h>
#include <net/cfg80211.h>
#include <net/wireless.h>
#include <net/iw_handler.h>
#include <net/mac80211.h>
......@@ -247,26 +248,6 @@ struct mesh_preq_queue {
u8 flags;
};
struct mesh_config {
/* Timeouts in ms */
/* Mesh plink management parameters */
u16 dot11MeshRetryTimeout;
u16 dot11MeshConfirmTimeout;
u16 dot11MeshHoldingTimeout;
u16 dot11MeshMaxPeerLinks;
u8 dot11MeshMaxRetries;
u8 dot11MeshTTL;
bool auto_open_plinks;
/* HWMP parameters */
u8 dot11MeshHWMPmaxPREQretries;
u32 path_refresh_time;
u16 min_discovery_timeout;
u32 dot11MeshHWMPactivePathTimeout;
u16 dot11MeshHWMPpreqMinInterval;
u16 dot11MeshHWMPnetDiameterTraversalTime;
};
/* flags used in struct ieee80211_if_sta.flags */
#define IEEE80211_STA_SSID_SET BIT(0)
#define IEEE80211_STA_BSSID_SET BIT(1)
......
......@@ -96,6 +96,8 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
[NL80211_ATTR_BSS_SHORT_PREAMBLE] = { .type = NLA_U8 },
[NL80211_ATTR_BSS_SHORT_SLOT_TIME] = { .type = NLA_U8 },
[NL80211_ATTR_MESH_PARAMS] = { .type = NLA_NESTED },
[NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
.len = NL80211_HT_CAPABILITY_LEN },
};
......@@ -1698,6 +1700,183 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
return r;
}
static int nl80211_get_mesh_params(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *drv;
struct mesh_config cur_params;
int err;
struct net_device *dev;
void *hdr;
struct nlattr *pinfoattr;
struct sk_buff *msg;
/* Look up our device */
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
/* Get the mesh params */
rtnl_lock();
err = drv->ops->get_mesh_params(&drv->wiphy, dev, &cur_params);
rtnl_unlock();
if (err)
goto out;
/* Draw up a netlink message to send back */
msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
if (!msg) {
err = -ENOBUFS;
goto out;
}
hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
NL80211_CMD_GET_MESH_PARAMS);
if (!hdr)
goto nla_put_failure;
pinfoattr = nla_nest_start(msg, NL80211_ATTR_MESH_PARAMS);
if (!pinfoattr)
goto nla_put_failure;
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
NLA_PUT_U16(msg, NL80211_MESHCONF_RETRY_TIMEOUT,
cur_params.dot11MeshRetryTimeout);
NLA_PUT_U16(msg, NL80211_MESHCONF_CONFIRM_TIMEOUT,
cur_params.dot11MeshConfirmTimeout);
NLA_PUT_U16(msg, NL80211_MESHCONF_HOLDING_TIMEOUT,
cur_params.dot11MeshHoldingTimeout);
NLA_PUT_U16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
cur_params.dot11MeshMaxPeerLinks);
NLA_PUT_U8(msg, NL80211_MESHCONF_MAX_RETRIES,
cur_params.dot11MeshMaxRetries);
NLA_PUT_U8(msg, NL80211_MESHCONF_TTL,
cur_params.dot11MeshTTL);
NLA_PUT_U8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
cur_params.auto_open_plinks);
NLA_PUT_U8(msg, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
cur_params.dot11MeshHWMPmaxPREQretries);
NLA_PUT_U32(msg, NL80211_MESHCONF_PATH_REFRESH_TIME,
cur_params.path_refresh_time);
NLA_PUT_U16(msg, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
cur_params.min_discovery_timeout);
NLA_PUT_U32(msg, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
cur_params.dot11MeshHWMPactivePathTimeout);
NLA_PUT_U16(msg, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
cur_params.dot11MeshHWMPpreqMinInterval);
NLA_PUT_U16(msg, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
cur_params.dot11MeshHWMPnetDiameterTraversalTime);
nla_nest_end(msg, pinfoattr);
genlmsg_end(msg, hdr);
err = genlmsg_unicast(msg, info->snd_pid);
goto out;
nla_put_failure:
genlmsg_cancel(msg, hdr);
err = -EMSGSIZE;
out:
/* Cleanup */
cfg80211_put_dev(drv);
dev_put(dev);
return err;
}
#define FILL_IN_MESH_PARAM_IF_SET(table, cfg, param, mask, attr_num, nla_fn) \
do {\
if (table[attr_num]) {\
cfg.param = nla_fn(table[attr_num]); \
mask |= (1 << (attr_num - 1)); \
} \
} while (0);\
static struct nla_policy
nl80211_meshconf_params_policy[NL80211_MESHCONF_ATTR_MAX+1] __read_mostly = {
[NL80211_MESHCONF_RETRY_TIMEOUT] = { .type = NLA_U16 },
[NL80211_MESHCONF_CONFIRM_TIMEOUT] = { .type = NLA_U16 },
[NL80211_MESHCONF_HOLDING_TIMEOUT] = { .type = NLA_U16 },
[NL80211_MESHCONF_MAX_PEER_LINKS] = { .type = NLA_U16 },
[NL80211_MESHCONF_MAX_RETRIES] = { .type = NLA_U8 },
[NL80211_MESHCONF_TTL] = { .type = NLA_U8 },
[NL80211_MESHCONF_AUTO_OPEN_PLINKS] = { .type = NLA_U8 },
[NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES] = { .type = NLA_U8 },
[NL80211_MESHCONF_PATH_REFRESH_TIME] = { .type = NLA_U32 },
[NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT] = { .type = NLA_U32 },
[NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME] = { .type = NLA_U16 },
};
static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
{
int err;
u32 mask;
struct cfg80211_registered_device *drv;
struct net_device *dev;
struct mesh_config cfg;
struct nlattr *tb[NL80211_MESHCONF_ATTR_MAX + 1];
struct nlattr *parent_attr;
parent_attr = info->attrs[NL80211_ATTR_MESH_PARAMS];
if (!parent_attr)
return -EINVAL;
if (nla_parse_nested(tb, NL80211_MESHCONF_ATTR_MAX,
parent_attr, nl80211_meshconf_params_policy))
return -EINVAL;
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
/* This makes sure that there aren't more than 32 mesh config
* parameters (otherwise our bitfield scheme would not work.) */
BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32);
/* Fill in the params struct */
mask = 0;
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout,
mask, NL80211_MESHCONF_RETRY_TIMEOUT, nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout,
mask, NL80211_MESHCONF_CONFIRM_TIMEOUT, nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHoldingTimeout,
mask, NL80211_MESHCONF_HOLDING_TIMEOUT, nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxPeerLinks,
mask, NL80211_MESHCONF_MAX_PEER_LINKS, nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxRetries,
mask, NL80211_MESHCONF_MAX_RETRIES, nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL,
mask, NL80211_MESHCONF_TTL, nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks,
mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS, nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries,
mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, path_refresh_time,
mask, NL80211_MESHCONF_PATH_REFRESH_TIME, nla_get_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, min_discovery_timeout,
mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout,
mask, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
nla_get_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPpreqMinInterval,
mask, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
dot11MeshHWMPnetDiameterTraversalTime,
mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
nla_get_u16);
/* Apply changes */
rtnl_lock();
err = drv->ops->set_mesh_params(&drv->wiphy, dev, &cfg, mask);
rtnl_unlock();
/* cleanup */
cfg80211_put_dev(drv);
dev_put(dev);
return err;
}
#undef FILL_IN_MESH_PARAM_IF_SET
static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
{
struct nlattr *tb[NL80211_REG_RULE_ATTR_MAX + 1];
......@@ -1915,6 +2094,18 @@ static struct genl_ops nl80211_ops[] = {
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_GET_MESH_PARAMS,
.doit = nl80211_get_mesh_params,
.policy = nl80211_policy,
/* can be retrieved by unprivileged users */
},
{
.cmd = NL80211_CMD_SET_MESH_PARAMS,
.doit = nl80211_set_mesh_params,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
};
/* multicast groups */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment