Commit b544dbac authored by Jeff Kirsher's avatar Jeff Kirsher
Browse files

davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers



Move the Texas Instruments drivers to drivers/net/ethernet/ti/ and
make the necessary Kconfig and Makefile changes.

CC: Sriram <srk@ti.com>
CC: Vinay Hegde <vinay.hegde@ti.com>
CC: Cyril Chemparathy <cyril@ti.com>
CC: Samuel Chessman <chessman@tux.org>
CC: <torben.mathiasen@compaq.com>
CC: Eugene Konev <ejka@imfi.kspu.ru>
CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent de69a4f2
......@@ -1908,7 +1908,7 @@ CPMAC ETHERNET DRIVER
M: Florian Fainelli <florian@openwrt.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/cpmac.c
F: drivers/net/ethernet/ti/cpmac.c
CPU FREQUENCY DRIVERS
M: Dave Jones <davej@redhat.com>
......@@ -6420,7 +6420,7 @@ L: tlan-devel@lists.sourceforge.net (subscribers-only)
W: http://sourceforge.net/projects/tlan/
S: Maintained
F: Documentation/networking/tlan.txt
F: drivers/net/tlan.*
F: drivers/net/ethernet/ti/tlan.*
TOMOYO SECURITY MODULE
M: Kentaro Takeda <takedakn@nttdata.co.jp>
......
......@@ -323,37 +323,6 @@ config NET_NETX
To compile this driver as a module, choose M here. The module
will be called netx-eth.
config TI_DAVINCI_EMAC
tristate "TI DaVinci EMAC Support"
depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
select TI_DAVINCI_MDIO
select TI_DAVINCI_CPDMA
select PHYLIB
help
This driver supports TI's DaVinci Ethernet .
To compile this driver as a module, choose M here: the module
will be called davinci_emac_driver. This is recommended.
config TI_DAVINCI_MDIO
tristate "TI DaVinci MDIO Support"
depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
select PHYLIB
help
This driver supports TI's DaVinci MDIO module.
To compile this driver as a module, choose M here: the module
will be called davinci_mdio. This is recommended.
config TI_DAVINCI_CPDMA
tristate "TI DaVinci CPDMA Support"
depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
help
This driver supports TI's DaVinci CPDMA dma engine.
To compile this driver as a module, choose M here: the module
will be called davinci_cpdma. This is recommended.
config DM9000
tristate "DM9000 support"
depends on ARM || BLACKFIN || MIPS
......@@ -500,31 +469,6 @@ config R6040
To compile this driver as a module, choose M here: the module
will be called r6040. This is recommended.
config TLAN
tristate "TI ThunderLAN support"
depends on NET_PCI && (PCI || EISA)
---help---
If you have a PCI Ethernet network card based on the ThunderLAN chip
which is supported by this driver, say Y and read the
Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Devices currently supported by this driver are Compaq Netelligent,
Compaq NetFlex and Olicom cards. Please read the file
<file:Documentation/networking/tlan.txt> for more details.
To compile this driver as a module, choose M here. The module
will be called tlan.
Please email feedback to <torben.mathiasen@compaq.com>.
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
depends on NET_ETHERNET && EXPERIMENTAL && AR7
select PHYLIB
help
TI AR7 CPMAC Ethernet support
config NET_POCKET
bool "Pocket and portable adapters"
depends on PARPORT
......
......@@ -5,11 +5,6 @@
obj-$(CONFIG_MII) += mii.o
obj-$(CONFIG_MDIO) += mdio.o
obj-$(CONFIG_PHYLIB) += phy/
obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
......@@ -23,7 +18,6 @@ obj-$(CONFIG_PLIP) += plip.o
obj-$(CONFIG_ROADRUNNER) += rrunner.o
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_FEALNX) += fealnx.o
......@@ -67,7 +61,6 @@ obj-$(CONFIG_IFB) += ifb.o
obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_CPMAC) += cpmac.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
......
......@@ -63,6 +63,7 @@ source "drivers/net/ethernet/smsc/Kconfig"
source "drivers/net/ethernet/stmicro/Kconfig"
source "drivers/net/ethernet/sun/Kconfig"
source "drivers/net/ethernet/tehuti/Kconfig"
source "drivers/net/ethernet/ti/Kconfig"
source "drivers/net/ethernet/toshiba/Kconfig"
source "drivers/net/ethernet/tundra/Kconfig"
source "drivers/net/ethernet/via/Kconfig"
......
......@@ -43,6 +43,7 @@ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
obj-$(CONFIG_NET_VENDOR_SUN) += sun/
obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
obj-$(CONFIG_NET_VENDOR_TI) += ti/
obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
obj-$(CONFIG_NET_VENDOR_VIA) += via/
#
# TI device configuration
#
config NET_VENDOR_TI
bool "Texas Instruments (TI) devices"
depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3))
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about TI devices. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_TI
config TI_DAVINCI_EMAC
tristate "TI DaVinci EMAC Support"
depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
select TI_DAVINCI_MDIO
select TI_DAVINCI_CPDMA
select PHYLIB
---help---
This driver supports TI's DaVinci Ethernet .
To compile this driver as a module, choose M here: the module
will be called davinci_emac_driver. This is recommended.
config TI_DAVINCI_MDIO
tristate "TI DaVinci MDIO Support"
depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
select PHYLIB
---help---
This driver supports TI's DaVinci MDIO module.
To compile this driver as a module, choose M here: the module
will be called davinci_mdio. This is recommended.
config TI_DAVINCI_CPDMA
tristate "TI DaVinci CPDMA Support"
depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
---help---
This driver supports TI's DaVinci CPDMA dma engine.
To compile this driver as a module, choose M here: the module
will be called davinci_cpdma. This is recommended.
config TLAN
tristate "TI ThunderLAN support"
depends on (PCI || EISA)
---help---
If you have a PCI Ethernet network card based on the ThunderLAN chip
which is supported by this driver, say Y and read the
Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Devices currently supported by this driver are Compaq Netelligent,
Compaq NetFlex and Olicom cards. Please read the file
<file:Documentation/networking/tlan.txt> for more details.
To compile this driver as a module, choose M here. The module
will be called tlan.
Please email feedback to <torben.mathiasen@compaq.com>.
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
depends on EXPERIMENTAL && AR7
select PHYLIB
---help---
TI AR7 CPMAC Ethernet support
endif # NET_VENDOR_TI
#
# Makefile for the TI network device drivers.
#
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_CPMAC) += cpmac.o
obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment