Commit f568f6f5 authored by Rob Herring's avatar Rob Herring Committed by Tony Lindgren

ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv

"usb-nop-xceiv" is using the phy binding, but is missing #phy-cells
property. This is probably because the binding was the precursor to the phy
binding.

Fixes the following warning in OMAP dts files:

Warning (phys_property): Missing property '#phy-cells' in node ...
Signed-off-by: default avatarRob Herring <robh@kernel.org>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: linux-omap@vger.kernel.org
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 1ff516a4
......@@ -33,6 +33,7 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
#phy-cells = <0>;
};
};
......
......@@ -90,6 +90,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
};
tfp410: encoder0 {
......
......@@ -64,6 +64,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
};
sound {
......
......@@ -42,12 +42,14 @@
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&hsusb1_power>;
#phy-cells = <0>;
};
/* HS USB Host PHY on PORT 2 */
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
};
ads7846reg: ads7846-reg {
......
......@@ -28,6 +28,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
};
leds {
......
......@@ -120,6 +120,7 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
#phy-cells = <0>;
};
tv0: connector {
......
......@@ -58,6 +58,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
vcc-supply = <&hsusb1_power>;
#phy-cells = <0>;
};
tfp410: encoder {
......
......@@ -37,6 +37,7 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
#phy-cells = <0>;
};
};
......
......@@ -51,6 +51,7 @@
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_vcc3>;
#phy-cells = <0>;
};
};
......
......@@ -51,6 +51,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; /* gpio_183 */
vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
};
/* Regulator to trigger the nPoweron signal of the Wifi module */
......
......@@ -205,6 +205,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
vcc-supply = <&vaux2>;
#phy-cells = <0>;
};
/* HS USB Host VBUS supply
......
......@@ -46,6 +46,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */
vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
};
sound {
......
......@@ -73,6 +73,7 @@
/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
/* LCD regulator from sw5 source */
......
......@@ -43,6 +43,7 @@
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
#phy-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&hsusb1phy_pins>;
......
......@@ -85,6 +85,7 @@
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
#phy-cells = <0>;
vcc-supply = <&hsusb1_power>;
clocks = <&auxclk3_ck>;
clock-names = "main_clk";
......
......@@ -44,6 +44,7 @@
reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
vcc-supply = <&vbat>;
#phy-cells = <0>;
clocks = <&auxclk3_ck>;
clock-names = "main_clk";
......
......@@ -69,12 +69,14 @@
clocks = <&auxclk1_ck>;
clock-names = "main_clk";
clock-frequency = <19200000>;
#phy-cells = <0>;
};
/* HS USB Host PHY on PORT 3 */
hsusb3_phy: hsusb3_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
#phy-cells = <0>;
};
tpd12s015: encoder {
......
......@@ -62,12 +62,14 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
#phy-cells = <0>;
};
/* HS USB Host PHY on PORT 3 */
hsusb3_phy: hsusb3_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
#phy-cells = <0>;
};
leds {
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment