1. 19 Jan, 2018 1 commit
  2. 20 Aug, 2017 1 commit
  3. 24 Jul, 2017 3 commits
  4. 01 Jul, 2017 1 commit
  5. 10 Jun, 2017 1 commit
    • Krzysztof Kozlowski's avatar
      ARM: defconfig: Cleanup from old Kconfig options · bd5f6260
      Krzysztof Kozlowski authored
      Remove old, dead Kconfig options (in order appearing in this commit):
       - EXPERIMENTAL is gone since v3.9;
       - INET_LRO: commit 7bbf3cae ("ipv4: Remove inet_lro library");
       - MTD_CONCAT: commit f53fdebc ("mtd: drop MTD_CONCAT from Kconfig entirely");
       - MTD_PARTITIONS: commit 6a8a98b2 ("mtd: kill CONFIG_MTD_PARTITIONS");
       - MTD_CHAR: commit 660685d9 ("mtd: merge mtdchar module with mtdcore");
       - NETDEV_1000 and NETDEV_10000: commit f860b052 ("drivers/net:
         Kconfig and Makefile cleanup"); NET_ETHERNET should be replaced with
         just ETHERNET but that is separate change;
       - INOTIFY: commit 2dfc1cae ("inotify: remove inotify in kernel interface");
       - MISC_DEVICES: commit 7c5763b8 ("drivers: misc: Remove
         MISC_DEVICES config option");
       - HID_SUPPORT: commit 1f41a6a9 ("HID: Fix the generic Kconfig options");
       - BT_L2CAP and BT_SCO: commit f1e91e16 ("Bluetooth: Always compile
         SCO and L2CAP in Bluetooth Core");
       - DEBUG_ERRORS: commit b025a3f8 ("ARM: 6876/1: Kconfig.debug:
         Remove unused CONFIG_DEBUG_ERRORS");
       - USB_DEVICE_CLASS: commit 007bab91 ("USB: remove CONFIG_USB_DEVICE_CLASS");
       - RCU_CPU_STALL_DETECTOR: commit a00e0d71 ("rcu: Remove conditional
         compilation for RCU CPU stall warnings");
       - SYSCTL_SYSCALL_CHECK: commit 7c60c48f ("sysctl: Improve the
         sysctl sanity checks");
       - IP_NF_QUEUE: commit 3dd6664f ("netfilter: remove unused "config IP_NF_QUEUE"");
       - IP_NF_TARGET_ULOG: commit d4da843e ("netfilter: kill remnants of ulog targets");
       - IP6_NF_QUEUE: commit d16cf20e ("netfilter: remove ip_queue support");
       - IP6_NF_TARGET_LOG: commit 6939c33a ("netfilter: merge ipt_LOG and
         ip6_LOG into xt_LOG");
       - USB_LED: commit a335aaf3 ("usb: misc: remove outdated USB LED driver");
       - MMC_UNSAFE_RESUME: commit 2501c917 ("mmc: core: Use
         MMC_UNSAFE_RESUME as default behavior");
       - AUTOFS_FS: commit 561c5cf9 ("staging: Remove autofs3");
       - DISPLAY_SUPPORT: commit 5a6b5e02 ("fbdev: remove display subsystem");
       - CFG80211_REG_DEBUG: commit c799ba6e ("cfg80211: remove
         CFG80211_REG_DEBUG");
       - VIDEO_OUTPUT_CONTROL: commit f167a64e ("video / output: Drop
         display output class support");
       - USB_LIBUSUAL: commit f61870ee ("usb: remove libusual");
       - CRYPTO_ZLIB: commit 11049218 ("crypto: compress - remove unused
         pcomp interface");
       - BLK_DEV_UB: commit 68a5059e
      
       ("block: remove the deprecated ub driver");
      Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
      [for vexpress]
      Acked-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
      Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
      bd5f6260
  6. 01 Jun, 2017 1 commit
  7. 06 Mar, 2017 1 commit
  8. 02 Jan, 2017 1 commit
    • Quentin Schulz's avatar
      ARM: sunxi: Add CONFIG_THERMAL_OF · 11937f69
      Quentin Schulz authored
      
      
      This enables CONFIG_THERMAL_OF by default for sunxi_defconfig. It is
      required to get Allwinner SoCs' temperature from the GPADC driver.
      
      The Allwinner SoCs all have an ADC that can also act as a touchscreen
      controller and a thermal sensor. The first four channels can be used
      either for the ADC or the touchscreen and the fifth channel is used for
      the thermal sensor.
      
      The thermal sensor requires the IP to be in touchscreen mode to return
      correct values. Therefore, if the user is continuously reading the ADC
      channel(s), the thermal framework in which the thermal sensor is
      registered will switch the IP in touchscreen mode to get a temperature
      value and requires a delay of 100ms (because of the mode switching),
      then the ADC will switch back to ADC mode and requires also a delay of
      100ms. If the ADC readings are critical to user and the SoC temperature
      is not, the GPADC driver is capable of not registering the thermal
      sensor in the thermal framework and thus, "quicken" the ADC readings. In
      most use cases, the SoC temperature is more critical (for cpu throttling
      for example or activating cooling devices) than ADC readings, thus it is
      now enabled by default.
      Signed-off-by: default avatarQuentin Schulz <quentin.schulz@free-electrons.com>
      Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
      11937f69
  9. 16 Oct, 2016 1 commit
  10. 30 May, 2016 1 commit
  11. 09 Feb, 2016 4 commits
  12. 31 Dec, 2015 1 commit
  13. 20 Nov, 2015 4 commits
  14. 21 Sep, 2015 1 commit
  15. 17 Sep, 2015 1 commit
  16. 16 Sep, 2015 1 commit
  17. 31 Jul, 2015 1 commit
  18. 05 Jul, 2015 2 commits
  19. 04 Mar, 2015 1 commit
    • Tyler Baker's avatar
      ARM: sunxi_defconfig: increase the number of maximum number of CPUs to 8 · afc1ad7e
      Tyler Baker authored
      The a80 optimus has 8 CPUs. I propose we increase the maximum number of CPUs to 8 to avoid the following warning identified during automated boot testing [1].
      
      ------------[ cut here ]------------
      WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x110/0x1e0()
      DT /cpu 5 nodes greater than max cores 4, capping them
      CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4ed #1
      Hardware name: Allwinner sun9i Family
      [] (unwind_backtrace) from [] (show_stack+0x10/0x14)
      [] (show_stack) from [] (dump_stack+0x74/0x90)
      [] (dump_stack) from [] (warn_slowpath_common+0x70/0xac)
      [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40)
      [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x110/0x1e0)
      [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x634/0x8d4)
      [] (setup_arch) from [] (start_kernel+0x88/0x3ac)
      [] (start_kernel) from [<20008074>] (0x20008074)
      ---[ end trace cb88537fdc8fa200 ]---
      
      [1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-sunxi_defconfig/lab-tbaker/boot-sun9i-a80-optimus.html
      
      
      
      Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
      Cc: Olof Johansson <olof@lixom.net>
      Cc: Kevin Hilman <khilman@kernel.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarTyler Baker <tyler.baker@linaro.org>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      afc1ad7e
  20. 23 Feb, 2015 2 commits
  21. 06 Jan, 2015 2 commits
  22. 19 Dec, 2014 1 commit
  23. 24 Oct, 2014 1 commit
  24. 15 Oct, 2014 1 commit
    • Olof Johansson's avatar
      ARM: sunxi_defconfig: enable CONFIG_REGULATOR · 9a2ad529
      Olof Johansson authored
      Commit 97a13e52
      
       ('net: phy: mdio-sun4i: don't select REGULATOR') removed
      the select of REGULATOR, which means that it now has to be explicitly
      enabled in the defconfig or things won't work very well.
      
      In particular, this fixes a problem with SD/MMC not probing on my A31-based
      board.
      
      Cc: Beniamino Galvani <b.galvani@gmail.com>
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      9a2ad529
  25. 04 Sep, 2014 1 commit
  26. 18 Aug, 2014 2 commits
  27. 29 May, 2014 1 commit
  28. 23 May, 2014 1 commit