- Nov 12, 2018
-
-
To reflect the (backward compatible) changes in the uabi we are bumping the driver's version. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> -
Robert Foss authoredWhen the execbuf call receives an in-fence it will get the dma_fence related to that fence fd and wait on it before submitting the draw call. On the out-fence side we get fence returned by the submitted draw call and attach it to a sync_file and send the sync_file fd to userspace. On error -1 is returned to userspace. VIRTGPU_EXECBUF_FENCE_FD_IN & VIRTGPU_EXECBUF_FENCE_FD_OUT are supported at the simultaneously and can be flagged for simultaneously. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Suggested-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
-
- Nov 05, 2018
-
-
Robert Foss authored
Add a new field called fence_fd that will be used by userspace to send in-fences to the kernel and receive out-fences created by the kernel. This uapi enables virtio to take advantage of explicit synchronization of dma-bufs. There are two new flags: * VIRTGPU_EXECBUF_FENCE_FD_IN to be used when passing an in-fence fd. * VIRTGPU_EXECBUF_FENCE_FD_OUT to be used when requesting an out-fence fd The execbuffer IOCTL is now read-write to allow the userspace to read the out-fence. On error -1 should be returned in the fence_fd field. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> -
Robert Foss authored
Refactor fence creation, add fences to relevant GPU operations and add cursor helper functions. This removes the potential for allocation failures from the cmd_submit and atomic_commit paths. Now a fence will be allocated first and only after that will we proceed with the rest of the execution. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Suggested-by: Rob Herring <robh@kernel.org> -
Signed-off-by:Gustavo Padovan <gustavo.padovan@collabora.co.uk> -
-
I'm observing random crashes in multi-vCPU L2 guests running on KVM on Hyper-V. I bisected the issue to the commit 877ad952 ("KVM: vmx: Add tlb_remote_flush callback support"). Hyper-V TLFS states: "AddressSpace specifies an address space ID (an EPT PML4 table pointer)" So apparently, Hyper-V doesn't expect us to pass naked EPTP, only PML4 pointer should be used. Strip off EPT configuration information before calling into vmx_hv_remote_flush_tlb(). Fixes: 877ad952 ("KVM: vmx: Add tlb_remote_flush callback support") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> -
ubifs_assert() is not WARN_ON(), so we have to invert the checks. Randy faced this warning with UBIFS being a module, since most users use UBIFS as builtin because UBIFS is the rootfs nobody noticed so far. :-( Including me. Reported-by:
Randy Dunlap <rdunlap@infradead.org>
Fixes: 54169ddd ("ubifs: Turn two ubifs_assert() into a WARN_ON()")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
On non-preempt kernels this loop can take a long time (more than 50 ticks) processing through entries. Link: http://lkml.kernel.org/r/20181010172623.57033-1-khazhy@google.com Signed-off-by:
Khazhismel Kumykov <khazhy@google.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Inside set_pmd_migration_entry() we are holding page table locks and thus we can not sleep so we can not call invalidate_range_start/end() So remove call to mmu_notifier_invalidate_range_start/end() because they are call inside the function calling set_pmd_migration_entry() (see try_to_unmap_one()). Link: http://lkml.kernel.org/r/20181012181056.7864-1-jglisse@redhat.com Signed-off-by:
Jérôme Glisse <jglisse@redhat.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Daniel Micay reports that attempting to use MAP_FIXED_NOREPLACE in an application causes that application to randomly crash. The existing check for handling MAP_FIXED_NOREPLACE looks up the first VMA that either overlaps or follows the requested region, and then bails out if that VMA overlaps *the start* of the requested region. It does not bail out if the VMA only overlaps another part of the requested region. Fix it by checking that the found VMA only starts at or after the end of the requested region, in which case there is no overlap. Test case: user@debian:~$ cat mmap_fixed_simple.c #include <sys/mman.h> #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #ifndef MAP_FIXED_NOREPLACE #define MAP_FIXED_NOREPLACE 0x100000 #endif int main(void) { char *p; errno = 0; p = mmap((void*)0x10001000, 0x4000, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0); printf("p1=%p err=%m\n", p); errno = 0; p = mmap((void*)0x10000000, 0x2000, PROT_READ, MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0); printf("p2=%p err=%m\n", p); char cmd[100]; sprintf(cmd, "cat /proc/%d/maps", getpid()); system(cmd); return 0; } user@debian:~$ gcc -o mmap_fixed_simple mmap_fixed_simple.c user@debian:~$ ./mmap_fixed_simple p1=0x10001000 err=Success p2=0x10000000 err=Success 10000000-10002000 r--p 00000000 00:00 0 10002000-10005000 ---p 00000000 00:00 0 564a9a06f000-564a9a070000 r-xp 00000000 fe:01 264004 /home/user/mmap_fixed_simple 564a9a26f000-564a9a270000 r--p 00000000 fe:01 264004 /home/user/mmap_fixed_simple 564a9a270000-564a9a271000 rw-p 00001000 fe:01 264004 /home/user/mmap_fixed_simple 564a9a54a000-564a9a56b000 rw-p 00000000 00:00 0 [heap] 7f8eba447000-7f8eba5dc000 r-xp 00000000 fe:01 405885 /lib/x86_64-linux-gnu/libc-2.24.so 7f8eba5dc000-7f8eba7dc000 ---p 00195000 fe:01 405885 /lib/x86_64-linux-gnu/libc-2.24.so 7f8eba7dc000-7f8eba7e0000 r--p 00195000 fe:01 405885 /lib/x86_64-linux-gnu/libc-2.24.so 7f8eba7e0000-7f8eba7e2000 rw-p 00199000 fe:01 405885 /lib/x86_64-linux-gnu/libc-2.24.so 7f8eba7e2000-7f8eba7e6000 rw-p 00000000 00:00 0 7f8eba7e6000-7f8eba809000 r-xp 00000000 fe:01 405876 /lib/x86_64-linux-gnu/ld-2.24.so 7f8eba9e9000-7f8eba9eb000 rw-p 00000000 00:00 0 7f8ebaa06000-7f8ebaa09000 rw-p 00000000 00:00 0 7f8ebaa09000-7f8ebaa0a000 r--p 00023000 fe:01 405876 /lib/x86_64-linux-gnu/ld-2.24.so 7f8ebaa0a000-7f8ebaa0b000 rw-p 00024000 fe:01 405876 /lib/x86_64-linux-gnu/ld-2.24.so 7f8ebaa0b000-7f8ebaa0c000 rw-p 00000000 00:00 0 7ffcc99fa000-7ffcc9a1b000 rw-p 00000000 00:00 0 [stack] 7ffcc9b44000-7ffcc9b47000 r--p 00000000 00:00 0 [vvar] 7ffcc9b47000-7ffcc9b49000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] user@debian:~$ uname -a Linux debian 4.19.0-rc6+ #181 SMP Wed Oct 3 23:43:42 CEST 2018 x86_64 GNU/Linux user@debian:~$ As you can see, the first page of the mapping at 0x10001000 was clobbered. Link: http://lkml.kernel.org/r/20181010152736.99475-1-jannh@google.com Fixes: a4ff8e86 ("mm: introduce MAP_FIXED_NOREPLACE") Signed-off-by:Jann Horn <jannh@google.com>
Reported-by: Daniel Micay <danielmicay@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Fix the following compile warning: fs/ocfs2/dlmglue.c:99:30: warning: lockdep_keys defined but not used [-Wunused-variable] static struct lock_class_key lockdep_keys[OCFS2_NUM_LOCK_TYPES]; Link: http://lkml.kernel.org/r/1536938148-32110-1-git-send-email-zhongjiang@huawei.com Signed-off-by:
zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Fix a leak of afs_server structs. The routine that installs them in the various lookup lists and trees gets a ref on leaving the function, whether it added the server or a server already exists. It shouldn't increment the refcount if it added the server. The effect of this that "rmmod kafs" will hang waiting for the leaked server to become unused. Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by:
David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Just drop the "linux" part of the path, it was never correct. Reported-by:
Joe Perches <joe@perches.com>
Fixes: 256ac037 ("dt-bindings: document devicetree bindings for mux-controllers and gpio-mux")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
The file is GPL v2 or later. Acked-by:
Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
It turns out that the fix in commit 6636c3cc56 is bad; the assertion that the iomap code no longer creates buffer heads is incorrect for filesystems that set the IOMAP_F_BUFFER_HEAD flag. Instead, what's happening is that gfs2_iomap_begin_write treats all files that have the jdata flag set as journaled files, which is incorrect as long as those files are inline ("stuffed"). We're handling stuffed files directly via the page cache, which is why we ended up with pages without buffer heads in gfs2_page_add_databufs. Fix this by handling stuffed journaled files correctly in gfs2_iomap_begin_write. This reverts commit 6636c3cc5690c11631e6366cf9a28fb99c8b25bb. Signed-off-by:Andreas Gruenbacher <agruenba@redhat.com> -
It doesn't make sense for a perf event to be configured as a CHAIN event in isolation, so extend the arm_pmu structure with a ->filter_match() function to allow the backend PMU implementation to reject CHAIN events early. Cc: <stable@vger.kernel.org> Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com> -
We describe ranges of 'reserved' memory to userspace via /proc/iomem. Commit 50d7ba36 ("arm64: export memblock_reserve()d regions via /proc/iomem") updated the logic to export regions that were reserved because their contents should be preserved. This allowed kexec-tools to tell the difference between 'reserved' memory that must be preserved and not overwritten, (e.g. the ACPI tables), and 'nomap' memory that must not be touched without knowing the memory-attributes (e.g. RAS CPER regions). The above commit wrongly assumed that memblock_reserve() would not be used to reserve regions that aren't memory. It turns out this is exactly what early_init_dt_reserve_memory_arch() will do if it finds a DT reserved-memory that was also carved out of the memory node, which results in a WARN_ON_ONCE() and the region being reserved instead of ignored. The ramoops description on hikey and dragonboard-410c both do this, so we can't simply write this configuration off as "buggy firmware". Avoid this issue by rewriting reserve_memblock_reserved_regions() so that only the portions of reserved regions which overlap with mapped memory are actually reserved. Fixes: 50d7ba36 ("arm64: export memblock_reserve()d regions via /proc/iomem") Reported-by:
John Stultz <john.stultz@linaro.org>
Reported-by: Paolo Pisati <p.pisati@gmail.com>
CC: Akashi Takahiro <takahiro.akashi@linaro.org>
CC: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com> -
Access to the list of cells by /proc/net/afs/cells has a couple of problems: (1) It should be checking against SEQ_START_TOKEN for the keying the header line. (2) It's only holding the RCU read lock, so it can't just walk over the list without following the proper RCU methods. Fix these by using an hlist instead of an ordinary list and using the appropriate accessor functions to follow it with RCU. Since the code that adds a cell to the list must also necessarily change, sort the list on insertion whilst we're at it. Fixes: 989782dc ("afs: Overhaul cell database management") Signed-off-by:David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
The previous patch introduced very large kernel stack usage and a Makefile change to hide the warning about it. From what I can tell, a number of things went wrong here: - The BCH_MAX_T constant was set to the maximum value for 'n', not the maximum for 't', which is much smaller. - The stack usage is actually larger than the entire kernel stack on some architectures that can use 4KB stacks (m68k, sh, c6x), which leads to an immediate overrun. - The justification in the patch description claimed that nothing changed, however that is not the case even without the two points above: the configuration is machine specific, and most boards never use the maximum BCH_ECC_WORDS() length but instead have something much smaller. That maximum would only apply to machines that use both the maximum block size and the maximum ECC strength. The largest value for 't' that I could find is '32', which in turn leads to a 60 byte array instead of 2048 bytes. Making it '64' for future extension seems also worthwhile, with 120 bytes for the array. Anything larger won't fit into the OOB area on NAND flash. With that changed, the warning can be enabled again. Only linux-4.19+ contains the breakage, so this is only needed as a stable backport if it does not make it into the release. Fixes: 02361bc7 ("lib/bch: Remove VLA usage") Reported-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> -
There is no reason to open code what the switch setup function does, in fact, because we just issued a switch reset, we would make all the register get their default values, including for instance, having unused port be enabled again and wasting power and leading to an inappropriate switch core clock being selected. Fixes: 8cfa9498 ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net> -
The order in which we release resources is unfortunately leading to bus errors while dismantling the port. This is because we set priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now permissible to clock gate the switch. Later on, when dsa_slave_destroy() comes in from dsa_unregister_switch() and calls dsa_switch_ops::port_disable, we perform the same dismantling again, and this time we hit registers that are clock gated. Make sure that dsa_unregister_switch() is the first thing that happens, which takes care of releasing all user visible resources, then proceed with clock gating hardware. We still need to set priv->wol_ports_mask to 0 to make sure that an enabled port properly gets disabled in case it was previously used as part of Wake-on-LAN. Fixes: d9338023 ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net> -
Enabling both CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y and CONFIG_GCOV_PROFILE_ALL=y results in linker warnings: warning: orphan section `.data..LPBX1' being placed in section `.data..LPBX1'. LD_DEAD_CODE_DATA_ELIMINATION adds compiler flag -fdata-sections. This option causes GCC to create separate data sections for data objects, including those generated by GCC internally for gcov profiling. The names of these objects start with a dot (.LPBX0, .LPBX1), resulting in section names starting with 'data..'. As section names starting with 'data..' are used for specific purposes in the Linux kernel, the linker script does not automatically include them in the output data section, resulting in the "orphan section" linker warnings. Fix this by specifically including sections named "data..LPBX*" in the data section. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> -
Enabling CONFIG_GCOV_PROFILE_ALL=y causes linker errors on ARM: `.text.exit' referenced in section `.ARM.exidx.text.exit': defined in discarded section `.text.exit' `.text.exit' referenced in section `.fini_array.00100': defined in discarded section `.text.exit' And related errors on NDS32: `.text.exit' referenced in section `.dtors.65435': defined in discarded section `.text.exit' The gcov compiler flags cause certain compiler versions to generate additional destructor-related sections that are not yet handled by the linker script, resulting in references between discarded and non-discarded sections. Since destructors are not used in the Linux kernel, fix this by discarding these additional sections. Reported-by:
Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Greentime Hu <green.hu@gmail.com>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> -
This function was renamed in commit 82fe39a6 ("i2c: refactor function to release a DMA safe buffer") but this kernel doc wasn't updated to point at the new function. Rename it. Fixes: 82fe39a6 ("i2c: refactor function to release a DMA safe buffer") Signed-off-by:
Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de> -
Tetsuo brought to my attention that I screwed up the scale_up/scale_down helpers when I factored out the rq-qos code. We need to wake up all the waiters when we add slots for requests to make, not when we shrink the slots. Otherwise we'll end up things waiting forever. This was a mistake and simply puts everything back the way it was. cc: stable@vger.kernel.org Fixes: a7905043 ("blk-rq-qos: refactor out common elements of blk-wbt") eported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
The sfp_mutex variable is defined but never used in this file. Not even in the commit that introduced that variable. Remove sfp_mutex, it has no purpose. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net> -
It has been reported that since commit 05212ba8 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices") at least RTL_GIGA_MAC_VER_38 NICs work erratically after a resume from suspend. The problem has been traced to a missing RX_MULTI_EN bit in the RxConfig register. We already set this bit for RTL_GIGA_MAC_VER_35 NICs of the same 8168F chip family so let's do it also for its other siblings: RTL_GIGA_MAC_VER_36 and RTL_GIGA_MAC_VER_38. Curiously, the NIC seems to work fine after a system boot without having this bit set as long as the system isn't suspended and resumed. Fixes: 05212ba8 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices") Reported-by:
Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net> -
commit 63ae7949 ("net: socionext: Use descriptor info instead of MMIO reads on Rx") removed constant mmio reads from the driver and started using a descriptor field to check if packet should be processed. This lead the napi rx handler being constantly called while no packets needed processing and ksoftirq getting 100% cpu usage. Issue one mmio read to clear the irq correcty after processing packets Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net> -
During boot, mlx4_core sets the driverinit configuration parameters and updates the devlink module on the initial values calling devlink_param_driverinit_value_set(). If devlink_param_driverinit_value_set() returns an error mlx4_core reports kernel module warning. This caused false alarm during boot in case kernel was compiled with CONFIG_NET_DEVLINK off. Fix by removing warning reported in case devlink_param_driverinit_value_set() fails. This actually makes the function mlx4_devlink_set_init_value() redundant to using directly devlink_param_driverinit_value_set() and so removed. It fixes the following kernel trace: mlx4_core 0000:00:06.0: devlink set parameter 0 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 1 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 4 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 5 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 3 value failed (err = -95) Fixes: bd1b51dc ("mlx4: Add mlx4 initial parameters table and register it") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net> -
When booting kernel with LOCKDEP option, below warning info was found: WARNING: possible recursive locking detected 4.19.0-rc7+ #14 Not tainted -------------------------------------------- swapper/0/1 is trying to acquire lock: 00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] 00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at: tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850 but task is already holding lock: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&list->lock)->rlock#4); lock(&(&list->lock)->rlock#4); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by swapper/0/1: #0: 00000000f7539d34 (pernet_ops_rwsem){+.+.}, at: register_pernet_subsys+0x19/0x40 net/core/net_namespace.c:1051 #1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] #1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849 stack backtrace: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc7+ #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1af/0x295 lib/dump_stack.c:113 print_deadlock_bug kernel/locking/lockdep.c:1759 [inline] check_deadlock kernel/locking/lockdep.c:1803 [inline] validate_chain kernel/locking/lockdep.c:2399 [inline] __lock_acquire+0xf1e/0x3c60 kernel/locking/lockdep.c:3411 lock_acquire+0x1db/0x520 kernel/locking/lockdep.c:3900 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850 tipc_link_bc_create+0xb5/0x1f0 net/tipc/link.c:526 tipc_bcast_init+0x59b/0xab0 net/tipc/bcast.c:521 tipc_init_net+0x472/0x610 net/tipc/core.c:82 ops_init+0xf7/0x520 net/core/net_namespace.c:129 __register_pernet_operations net/core/net_namespace.c:940 [inline] register_pernet_operations+0x453/0xac0 net/core/net_namespace.c:1011 register_pernet_subsys+0x28/0x40 net/core/net_namespace.c:1052 tipc_init+0x83/0x104 net/tipc/core.c:140 do_one_initcall+0x109/0x70a init/main.c:885 do_initcall_level init/main.c:953 [inline] do_initcalls init/main.c:961 [inline] do_basic_setup init/main.c:979 [inline] kernel_init_freeable+0x4bd/0x57f init/main.c:1144 kernel_init+0x13/0x180 init/main.c:1063 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413 The reason why the noise above was complained by LOCKDEP is because we nested to hold l->wakeupq.lock and l->inputq->lock in tipc_link_reset function. In fact it's unnecessary to move skb buffer from l->wakeupq queue to l->inputq queue while holding the two locks at the same time. Instead, we can move skb buffers in l->wakeupq queue to a temporary list first and then move the buffers of the temporary list to l->inputq queue, which is also safe for us. Fixes: 3f32d0be ("tipc: lock wakeup & inputq at tipc_link_reset()") Reported-by:Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net> -
The udpgso_bench.sh script requires several bash-only features. This may cause random failures if the default shell is not bash. Address the above explicitly requiring bash as the script interpreter Fixes: 3a687bef ("selftests: udp gso benchmark") Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net> -
the script rtnetlink.sh requires a bash-only features (sleep with sub-second precision). This may cause random test failure if the default shell is not bash. Address the above explicitly requiring bash as the script interpreter. Fixes: 33b01b7b ("selftests: add rtnetlink test script") Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net> -
Added support for Gemalto's Cinterion ALASxx WWAN interfaces by adding QMI_FIXED_INTF with Cinterion's VID and PID. Signed-off-by:
Giacinto Cifelli <gciofono@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net> -
In tipc_sk_filter_rcv(), when we detect protocol messages with error we call tipc_sk_conn_proto_rcv() and let it reset the connection and notify the socket by calling sk->sk_state_change(). However, tipc_sk_filter_rcv() may have been called from the function tipc_backlog_rcv(), in which case the socket lock is held and the socket already awake. This means that the sk_state_change() call is ignored and the error notification lost. Now the receive queue will remain empty and the socket sleeps forever. In this commit, we convert the protocol message into a connection abort message and enqueue it into the socket's receive queue. By this addition to the above state change we cover all conditions. Acked-by:
Ying Xue <ying.xue@windriver.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net> -
In the patch referred to below we added link tolerance as an additional criteria for declaring broadcast transmission "stale" and resetting the affected links. However, the 'tolerance' field of the broadcast link is never set, and remains at zero. This renders the whole commit without the intended improving effect, but luckily also with no negative effect. In this commit we add the missing initialization. Fixes: a4dc70d4 ("tipc: extend link reset criteria for stale packet retransmission") Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net> -
When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is received, we must clamp its value. However, we can receive a PMTU exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an increase in PMTU. To fix this, take the smallest of the old MTU and ip_rt_min_pmtu. Before this patch, in case of an update, the exception's MTU would always change. Now, an exception can have only its lock flag updated, but not the MTU, so we need to add a check on locking to the following "is this exception getting updated, or close to expiring?" test. Fixes: d52e5a7e ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net> -
Since commit 5aad1de5 ("ipv4: use separate genid for next hop exceptions"), exceptions get deprecated separately from cached routes. In particular, administrative changes don't clear PMTU anymore. As Stefano described in commit e9fa1495 ("ipv6: Reflect MTU changes on PMTU of exceptions for MTU-less routes"), the PMTU discovered before the local MTU change can become stale: - if the local MTU is now lower than the PMTU, that PMTU is now incorrect - if the local MTU was the lowest value in the path, and is increased, we might discover a higher PMTU Similarly to what commit e9fa1495 did for IPv6, update PMTU in those cases. If the exception was locked, the discovered PMTU was smaller than the minimal accepted PMTU. In that case, if the new local MTU is smaller than the current PMTU, let PMTU discovery figure out if locking of the exception is still needed. To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU notifier. By the time the notifier is called, dev->mtu has been changed. This patch adds the old MTU as additional information in the notifier structure, and a new call_netdevice_notifiers_u32() function. Fixes: 5aad1de5 ("ipv4: use separate genid for next hop exceptions") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net> -
The fib6_info_alloc() function allocates percpu memory to hold per CPU pointers to rt6_info, but this memory is never freed. Fix it. Fixes: a64efe14 ("net/ipv6: introduce fib6_info struct and helpers") Signed-off-by:
Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net> -
In rds_send_mprds_hash(), if the calculated hash value is non-zero and the MPRDS connections are not yet up, it will wait. But it should not wait if the send is non-blocking. In this case, it should just use the base c_path for sending the message. Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-