Commit e5720648 authored by Kuldeep Singh's avatar Kuldeep Singh Committed by Priyanka Jain

arm: dts: lx2160a: Add FSPI node properties

Align flexspi node properties with linux device-tree properties
Tested on LX2160A-RDB
Signed-off-by: default avatarKuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: default avatarPriyanka Jain <priyanka.jain@nxp.com>
parent 5e2fb3ea
......@@ -16,7 +16,9 @@
/ {
model = "NXP Layerscape LX2160ARDB Board";
compatible = "fsl,lx2160ardb", "fsl,lx2160a";
aliases {
spi0 = &fspi;
};
};
&esdhc0 {
......@@ -28,6 +30,26 @@
mmc-hs200-1_8v;
};
&fspi {
status = "okay";
mt35xu512aba0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
};
mt35xu512aba1: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <1>;
};
};
&i2c0 {
status = "okay";
u-boot,dm-pre-reloc;
......
......@@ -6,6 +6,8 @@
*
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "fsl,lx2160a";
interrupt-parent = <&gic>;
......@@ -49,6 +51,19 @@
<1 10 0x8>; /* Hypervisor PPI, active-low */
};
fspi: flexspi@20c0000 {
compatible = "nxp,lx2160a-fspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x20c0000 0x0 0x10000>,
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "fspi_en", "fspi";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
i2c0: i2c@2000000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment