Commit 15445dcd authored by Richard Henderson's avatar Richard Henderson
Browse files

* config/tc-alpha.c (cpu_types): Enable EV6 PALcode with -m21264.

        (emit_insn): Look for pc-relative and no-overflow specifiers on
        internal relocation types.
parent 287169e5
Sat Feb 13 14:10:10 1999 Richard Henderson <rth@cygnus.com>
* config/tc-alpha.c (cpu_types): Enable EV6 PALcode with -m21264.
(emit_insn): Look for pc-relative and no-overflow specifiers on
internal relocation types.
1999-02-13 Jim Blandy <jimb@zwingli.cygnus.com>
* doc/c-mips.texi (MIPS Opts): Updated list of -mNNNN and
......
/* tc-alpha.c - Processor-specific code for the DEC Alpha AXP CPU.
Copyright (C) 1989, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc.
Copyright (C) 1989, 93-98, 1999 Free Software Foundation, Inc.
Contributed by Carnegie Mellon University, 1993.
Written by Alessandro Forin, based on earlier gas-1.38 target CPU files.
Modified by Ken Raeburn for gas-2.x and ECOFF support.
......@@ -451,14 +451,11 @@ static const struct cpu_type
{ "21066", AXP_OPCODE_BASE|AXP_OPCODE_EV4 },
{ "21068", AXP_OPCODE_BASE|AXP_OPCODE_EV4 },
{ "21164", AXP_OPCODE_BASE|AXP_OPCODE_EV5 },
/* Do we have CIX extension here? */
{ "21164a", AXP_OPCODE_BASE|AXP_OPCODE_EV5|AXP_OPCODE_BWX },
/* Still same PALcodes? */
{ "21164pc", (AXP_OPCODE_BASE|AXP_OPCODE_EV5|AXP_OPCODE_BWX
|AXP_OPCODE_MAX) },
/* All new PALcodes? Extras? */
{ "21264", (AXP_OPCODE_BASE|AXP_OPCODE_BWX
|AXP_OPCODE_CIX|AXP_OPCODE_MAX) },
{ "21264", (AXP_OPCODE_BASE|AXP_OPCODE_EV6|AXP_OPCODE_BWX
|AXP_OPCODE_MAX|AXP_OPCODE_CIX) },
{ "ev4", AXP_OPCODE_BASE },
{ "ev45", AXP_OPCODE_BASE },
......@@ -466,7 +463,7 @@ static const struct cpu_type
{ "ev5", AXP_OPCODE_BASE },
{ "ev56", AXP_OPCODE_BASE|AXP_OPCODE_BWX },
{ "pca56", AXP_OPCODE_BASE|AXP_OPCODE_BWX|AXP_OPCODE_MAX },
{ "ev6", AXP_OPCODE_BASE|AXP_OPCODE_BWX|AXP_OPCODE_CIX|AXP_OPCODE_MAX },
{ "ev6", AXP_OPCODE_BASE|AXP_OPCODE_BWX|AXP_OPCODE_MAX|AXP_OPCODE_CIX },
{ "all", AXP_OPCODE_BASE },
{ 0 }
......@@ -1003,9 +1000,10 @@ md_show_usage (stream)
Alpha options:\n\
-32addr treat addresses as 32-bit values\n\
-F lack floating point instructions support\n\
-m21064 | -m21066 | -m21164 | -m21164a\n\
-mev4 | -mev45 | -mev5 | -mev56 | -mall\n\
specify variant of Alpha architecture\n"),
-mev4 | -mev45 | -mev5 | -mev56 | -mpca56 | -mev6 | -mall\n\
specify variant of Alpha architecture\n
-m21064 | -m21066 | -m21164 | -m21164a | -m21164pc | -m21264\n\
these variants include PALcode opcodes\n"),
stream);
#ifdef OBJ_EVAX
fputs (_("\
......@@ -1435,7 +1433,8 @@ tc_gen_reloc (sec, fixp)
* at assembly time. bfd_perform_reloc doesn't know about this sort
* of thing, and as a result we need to fake it out here.
*/
if (S_IS_EXTERN (fixp->fx_addsy) && !S_IS_COMMON(fixp->fx_addsy))
if ((S_IS_EXTERN (fixp->fx_addsy) || S_IS_WEAK (fixp->fx_addsy))
&& !S_IS_COMMON(fixp->fx_addsy))
reloc->addend -= fixp->fx_addsy->bsym->value;
#endif
}
......@@ -1921,13 +1920,18 @@ emit_insn (insn)
/* Apply the fixups in order */
for (i = 0; i < insn->nfixups; ++i)
{
const struct alpha_operand *operand;
struct alpha_fixup *fixup = &insn->fixups[i];
int size, pcrel;
fixS *fixP;
/* Some fixups are only used internally and so have no howto */
if ((int)fixup->reloc < 0)
size = 4, pcrel = 0;
{
operand = &alpha_operands[-(int)fixup->reloc];
size = 4;
pcrel = ((operand->flags & AXP_OPERAND_RELATIVE) != 0);
}
#ifdef OBJ_ELF
/* These relocation types are only used internally. */
else if (fixup->reloc == BFD_RELOC_ALPHA_GPDISP_HI16
......@@ -1963,7 +1967,13 @@ emit_insn (insn)
case BFD_RELOC_GPREL32:
fixP->fx_no_overflow = 1;
break;
default:
if ((int)fixup->reloc < 0)
{
if (operand->flags & AXP_OPERAND_NOOVERFLOW)
fixP->fx_no_overflow = 1;
}
break;
}
}
......@@ -2110,7 +2120,8 @@ FIXME
addend = tok[1];
#ifdef OBJ_ECOFF
assert (addend.X_op == O_constant);
if (addend.X_op != O_constant)
as_bad (_("can not resolve expression"));
addend.X_op = O_symbol;
addend.X_add_symbol = alpha_gp_symbol;
#endif
......@@ -3613,7 +3624,7 @@ s_alpha_mask (fp)
ecoff_directive_mask (0);
}
else
ignore_rest_of_line ();
discard_rest_of_line ();
}
static void
......@@ -3623,7 +3634,7 @@ s_alpha_frame (dummy)
if (ECOFF_DEBUGGING)
ecoff_directive_frame (0);
else
ignore_rest_of_line ();
discard_rest_of_line ();
}
static void
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment