Commit 5c26072a authored by Andrew Cagney's avatar Andrew Cagney
Browse files

2004-11-08 Andrew Cagney <cagney@gnu.org>

	* README: Refer to 6.3, not 6.2, update directory listing droppng
	references to intl/ and mmalloc/.
	* PROBLEMS: Refer to 6.3 not 6.2.
parent 3c8fa307
2004-11-08 Andrew Cagney <cagney@gnu.org>
 
* README: Refer to 6.3, not 6.2, update directory listing droppng
references to intl/ and mmalloc/.
* PROBLEMS: Refer to 6.3 not 6.2.
* PROBLEMS: Delete no-longer applicable problems.
 
2004-11-07 Andrew Cagney <cagney@redhat.com>
......
Known problems in GDB 6.2
Known problems in GDB 6.3
See also: http://www.gnu.org/software/gdb/bugs/
......
README for gdb-6.2 release
Updated 17 July, 2004 by Andrew Cagney
README for gdb-6.3 release
Updated 8, November, 2004 by Andrew Cagney
This is GDB, the GNU source-level debugger.
......@@ -20,7 +20,7 @@ Unpacking and Installation -- quick overview
In this release, the GDB debugger sources, the generic GNU include
files, the BFD ("binary file description") library, the readline
library, and other libraries all have directories of their own
underneath the gdb-6.2 directory. The idea is that a variety of GNU
underneath the gdb-6.3 directory. The idea is that a variety of GNU
tools can share a common copy of these things. Be aware of variation
over time--for example don't try to build gdb with a copy of bfd from
a release other than the gdb release (such as a binutils release),
......@@ -29,22 +29,21 @@ Configuration scripts and makefiles exist to cruise up and down this
directory tree and automatically build all the pieces in the right
order.
When you unpack the gdb-6.2.tar.gz file, you'll find a directory
called `gdb-6.2', which contains:
When you unpack the gdb-6.3.tar.gz file, you'll find a directory
called `gdb-6.3', which contains:
COPYING config.sub intl missing opcodes
COPYING.LIB configure libiberty mkinstalldirs readline
Makefile.in configure.in libtool.m4 mmalloc sim
README djunpack.bat ltcf-c.sh move-if-change symlink-tree
bfd etc ltcf-cxx.sh mpw-README texinfo
config gdb ltcf-gcj.sh mpw-build.in utils
config-ml.in gettext.m4 ltconfig mpw-config.in ylwrap
config.guess include ltmain.sh mpw-configure
config.if install-sh md5.sum mpw-install
COPYING config-ml.in gdb ltcf-gcj.sh readline
COPYING.LIB config.guess gettext.m4 ltconfig sim
Makefile.def config.if include ltmain.sh src-release
Makefile.in config.sub install-sh md5.sum symlink-tree
Makefile.tpl configure libiberty missing texinfo
README configure.in libtool.m4 mkinstalldirs ylwrap
bfd djunpack.bat ltcf-c.sh move-if-change
config etc ltcf-cxx.sh opcodes
You can build GDB right in the source directory:
cd gdb-6.2
cd gdb-6.3
./configure
make
cp gdb/gdb /usr/local/bin/gdb (or wherever you want)
......@@ -58,25 +57,25 @@ You can build GDB in any empty build directory:
mkdir build
cd build
<full path to your sources>/gdb-6.2/configure
<full path to your sources>/gdb-6.3/configure
make
cp gdb/gdb /usr/local/bin/gdb (or wherever you want)
(Building GDB with DJGPP tools for MS-DOS/MS-Windows is slightly
different; see the file gdb-6.2/gdb/config/djgpp/README for details.)
different; see the file gdb-6.3/gdb/config/djgpp/README for details.)
This will configure and build all the libraries as well as GDB. If
`configure' can't determine your system type, specify one as its
argument, e.g., `./configure sun4' or `./configure decstation'.
Make sure that your 'configure' line ends in 'gdb-6.2/configure':
Make sure that your 'configure' line ends in 'gdb-6.3/configure':
/berman/migchain/source/gdb-6.2/configure # RIGHT
/berman/migchain/source/gdb-6.2/gdb/configure # WRONG
/berman/migchain/source/gdb-6.3/configure # RIGHT
/berman/migchain/source/gdb-6.3/gdb/configure # WRONG
The gdb package contains several subdirectories, such as 'gdb',
'bfd', and 'readline'. If your 'configure' line ends in
'gdb-6.2/gdb/configure', then you are configuring only the gdb
'gdb-6.3/gdb/configure', then you are configuring only the gdb
subdirectory, not the whole gdb package. This leads to build errors
such as:
......@@ -107,7 +106,7 @@ documentation and TeX (or `texi2roff') to typeset the printed version.
GDB includes an already formatted copy of the on-line Info version
of this manual in the `gdb/doc' subdirectory. The main Info file is
`gdb-6.2/gdb/doc/gdb.info', and it refers to subordinate files
`gdb-6.3/gdb/doc/gdb.info', and it refers to subordinate files
matching `gdb.info*' in the same directory. If necessary, you can
print out these files, or read them with any editor; but they are
easier to read using the `info' subsystem in GNU Emacs or the
......@@ -119,7 +118,7 @@ Info formatting programs, such as `texinfo-format-buffer' or
`makeinfo'.
If you have `makeinfo' installed, and are in the top level GDB
source directory (`gdb-6.2', in the case of version 6.2), you can make
source directory (`gdb-6.3', in the case of version 6.3), you can make
the Info file by typing:
cd gdb/doc
......@@ -128,7 +127,7 @@ the Info file by typing:
If you want to typeset and print copies of this manual, you need
TeX, a program to print its DVI output files, and `texinfo.tex', the
Texinfo definitions file. This file is included in the GDB
distribution, in the directory `gdb-6.2/texinfo'.
distribution, in the directory `gdb-6.3/texinfo'.
TeX is a typesetting program; it does not print files directly, but
produces output files called DVI files. To print a typeset document,
......@@ -142,11 +141,11 @@ without any extension or a `.dvi' extension.
This file tells TeX how to typeset a document written in Texinfo
format. On its own, TeX cannot read, much less typeset a Texinfo file.
`texinfo.tex' is distributed with GDB and is located in the
`gdb-6.2/texinfo' directory.
`gdb-6.3/texinfo' directory.
If you have TeX and a DVI printer program installed, you can typeset
and print this manual. First switch to the the `gdb' subdirectory of
the main source directory (for example, to `gdb-6.2/gdb') and then type:
the main source directory (for example, to `gdb-6.3/gdb') and then type:
make doc/gdb.dvi
......@@ -169,71 +168,60 @@ preparing GDB for installation; you can then use `make' to build the
a single directory, whose name is usually composed by appending the
version number to `gdb'.
For example, the GDB version 6.2 distribution is in the `gdb-6.2'
For example, the GDB version 6.3 distribution is in the `gdb-6.3'
directory. That directory contains:
`gdb-6.2/{COPYING,COPYING.LIB}'
`gdb-6.3/{COPYING,COPYING.LIB}'
Standard GNU license files. Please read them.
`gdb-6.2/bfd'
`gdb-6.3/bfd'
source for the Binary File Descriptor library
`gdb-6.2/config*'
`gdb-6.3/config*'
script for configuring GDB, along with other support files
`gdb-6.2/gdb'
`gdb-6.3/gdb'
the source specific to GDB itself
`gdb-6.2/include'
`gdb-6.3/include'
GNU include files
`gdb-6.2/libiberty'
`gdb-6.3/libiberty'
source for the `-liberty' free software library
`gdb-6.2/mmalloc'
source for the GNU memory-mapped malloc package
`gdb-6.2/opcodes'
`gdb-6.3/opcodes'
source for the library of opcode tables and disassemblers
`gdb-6.2/readline'
`gdb-6.3/readline'
source for the GNU command-line interface
NOTE: The readline library is compiled for use by GDB, but will
not be installed on your system when "make install" is issued.
`gdb-6.2/sim'
`gdb-6.3/sim'
source for some simulators (ARM, D10V, SPARC, M32R, MIPS, PPC, V850, etc)
`gdb-6.2/intl'
source for the GNU gettext library, for internationalization.
This is slightly modified from the standalone gettext
distribution you can get from GNU.
`gdb-6.2/texinfo'
`gdb-6.3/texinfo'
The `texinfo.tex' file, which you need in order to make a printed
manual using TeX.
`gdb-6.2/etc'
`gdb-6.3/etc'
Coding standards, useful files for editing GDB, and other
miscellanea.
`gdb-6.2/utils'
A grab bag of random utilities.
Note: the following instructions are for building GDB on Unix or
Unix-like systems. Instructions for building with DJGPP for
MS-DOS/MS-Windows are in the file gdb/config/djgpp/README.
The simplest way to configure and build GDB is to run `configure'
from the `gdb-VERSION-NUMBER' source directory, which in this example
is the `gdb-6.2' directory.
is the `gdb-6.3' directory.
First switch to the `gdb-VERSION-NUMBER' source directory if you are
not already in it; then run `configure'.
For example:
cd gdb-6.2
cd gdb-6.3
./configure
make
......@@ -249,8 +237,8 @@ you may need to run `sh' on it explicitly:
sh configure
If you run `configure' from a directory that contains source
directories for multiple libraries or programs, such as the `gdb-6.2'
source directory for version 6.2, `configure' creates configuration
directories for multiple libraries or programs, such as the `gdb-6.3'
source directory for version 6.3, `configure' creates configuration
files for every directory level underneath (unless you tell it not to,
with the `--norecursion' option).
......@@ -258,10 +246,10 @@ with the `--norecursion' option).
directories in the GDB distribution, if you only want to configure that
subdirectory; but be sure to specify a path to it.
For example, with version 6.2, type the following to configure only
For example, with version 6.3, type the following to configure only
the `bfd' subdirectory:
cd gdb-6.2/bfd
cd gdb-6.3/bfd
../configure
You can install `gdb' anywhere; it has no hardwired paths. However,
......@@ -290,13 +278,13 @@ directory. If the path to `configure' would be the same as the
argument to `--srcdir', you can leave out the `--srcdir' option; it
will be assumed.)
For example, with version 6.2, you can build GDB in a separate
For example, with version 6.3, you can build GDB in a separate
directory for a Sun 4 like this:
cd gdb-6.2
cd gdb-6.3
mkdir ../gdb-sun4
cd ../gdb-sun4
../gdb-6.2/configure
../gdb-6.3/configure
make
When `configure' builds a configuration using a remote source
......@@ -317,8 +305,8 @@ called `configure' (or one of its subdirectories).
The `Makefile' that `configure' generates in each source directory
also runs recursively. If you type `make' in a source directory such
as `gdb-6.2' (or in a separate configured directory configured with
`--srcdir=PATH/gdb-6.2'), you will build all the required libraries,
as `gdb-6.3' (or in a separate configured directory configured with
`--srcdir=PATH/gdb-6.3'), you will build all the required libraries,
and then build GDB.
When you have multiple hosts or targets configured in separate
......@@ -361,7 +349,7 @@ you can use it to test your guesses on abbreviations--for example:
Invalid configuration `i786v': machine `i786v' not recognized
`config.sub' is also distributed in the GDB source directory
(`gdb-6.2', for version 6.2).
(`gdb-6.3', for version 6.3).
`configure' options
......@@ -491,7 +479,7 @@ As an alternative, the bug report can be submitted, via e-mail, to the
address "bug-gdb@gnu.org".
When submitting a bug, please include the GDB version number (e.g.,
gdb-6.2), and how you configured it (e.g., "sun4" or "mach386 host,
gdb-6.3), and how you configured it (e.g., "sun4" or "mach386 host,
i586-intel-synopsys target"). Since GDB now supports so many
different configurations, it is important that you be precise about
this. If at all possible, you should include the actual banner that
......@@ -546,17 +534,17 @@ ftp://sources.redhat.com/pub/dejagnu/ will contain a recent snapshot.
Once DejaGNU is installed, you can run the tests in one of the
following ways:
(1) cd gdb-6.2
(1) cd gdb-6.3
make check-gdb
or
(2) cd gdb-6.2/gdb
(2) cd gdb-6.3/gdb
make check
or
(3) cd gdb-6.2/gdb/testsuite
(3) cd gdb-6.3/gdb/testsuite
make site.exp (builds the site specific file)
runtest -tool gdb GDB=../gdb (or GDB=<somepath> as appropriate)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment