- Oct 05, 2022
-
-
Greg Kroah-Hartman authoredLink: https://lore.kernel.org/r/20221003070721.971297651@linuxfoundation.org Tested-by:
Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Chris Wilson authored
commit d119888b upstream. i915_perf assumes that it can use the i915_gem_context reference to protect its i915->gem.contexts.list iteration. However, this requires that we do not remove the context from the list until after we drop the final reference and release the struct. If, as currently, we remove the context from the list during context_close(), the link.next pointer may be poisoned while we are holding the context reference and cause a GPF: [ 4070.573157] i915 0000:00:02.0: [drm:i915_perf_open_ioctl [i915]] filtering on ctx_id=0x1fffff ctx_id_mask=0x1fffff [ 4070.574881] general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP [ 4070.574897] CPU: 1 PID: 284392 Comm: amd_performance Tainted: G E 5.17.9 #180 [ 4070.574903] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017 [ 4070.574907] RIP: 0010:oa_configure_all_contexts.isra.0+0x222/0x350 [i915] [ 4070.574982] Code: 08 e8 32 6e 10 e1 4d 8b 6d 50 b8 ff ff ff ff 49 83 ed 50 f0 41 0f c1 04 24 83 f8 01 0f 84 e3 00 00 00 85 c0 0f 8e fa 00 00 00 <49> 8b 45 50 48 8d 70 b0 49 8d 45 50 48 39 44 24 10 0f 85 34 fe ff [ 4070.574990] RSP: 0018:ffffc90002077b78 EFLAGS: 00010202 [ 4070.574995] RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000000 [ 4070.575000] RDX: 0000000000000001 RSI: ffffc90002077b20 RDI: ffff88810ddc7c68 [ 4070.575004] RBP: 0000000000000001 R08: ffff888103242648 R09: fffffffffffffffc [ 4070.575008] R10: ffffffff82c50bc0 R11: 0000000000025c80 R12: ffff888101bf1860 [ 4070.575012] R13: dead0000000000b0 R14: ffffc90002077c04 R15: ffff88810be5cabc [ 4070.575016] FS: 00007f1ed50c0780(0000) GS:ffff88885ec80000(0000) knlGS:0000000000000000 [ 4070.575021] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4070.575025] CR2: 00007f1ed5590280 CR3: 000000010ef6f005 CR4: 00000000003706e0 [ 4070.575029] Call Trace: [ 4070.575033] <TASK> [ 4070.575037] lrc_configure_all_contexts+0x13e/0x150 [i915] [ 4070.575103] gen8_enable_metric_set+0x4d/0x90 [i915] [ 4070.575164] i915_perf_open_ioctl+0xbc0/0x1500 [i915] [ 4070.575224] ? asm_common_interrupt+0x1e/0x40 [ 4070.575232] ? i915_oa_init_reg_state+0x110/0x110 [i915] [ 4070.575290] drm_ioctl_kernel+0x85/0x110 [ 4070.575296] ? update_load_avg+0x5f/0x5e0 [ 4070.575302] drm_ioctl+0x1d3/0x370 [ 4070.575307] ? i915_oa_init_reg_state+0x110/0x110 [i915] [ 4070.575382] ? gen8_gt_irq_handler+0x46/0x130 [i915] [ 4070.575445] __x64_sys_ioctl+0x3c4/0x8d0 [ 4070.575451] ? __do_softirq+0xaa/0x1d2 [ 4070.575456] do_syscall_64+0x35/0x80 [ 4070.575461] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 4070.575467] RIP: 0033:0x7f1ed5c10397 [ 4070.575471] Code: 3c 1c e8 1c ff ff ff 85 c0 79 87 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a9 da 0d 00 f7 d8 64 89 01 48 [ 4070.575478] RSP: 002b:00007ffd65c8d7a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 4070.575484] RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f1ed5c10397 [ 4070.575488] RDX: 00007ffd65c8d7c0 RSI: 0000000040106476 RDI: 0000000000000006 [ 4070.575492] RBP: 00005620972f9c60 R08: 000000000000000a R09: 0000000000000005 [ 4070.575496] R10: 000000000000000d R11: 0000000000000246 R12: 000000000000000a [ 4070.575500] R13: 000000000000000d R14: 0000000000000000 R15: 00007ffd65c8d7c0 [ 4070.575505] </TASK> [ 4070.575507] Modules linked in: nls_ascii(E) nls_cp437(E) vfat(E) fat(E) i915(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) aesni_intel(E) crypto_simd(E) intel_gtt(E) cryptd(E) ttm(E) rapl(E) intel_cstate(E) drm_kms_helper(E) cfbfillrect(E) syscopyarea(E) cfbimgblt(E) intel_uncore(E) sysfillrect(E) mei_me(E) sysimgblt(E) i2c_i801(E) fb_sys_fops(E) mei(E) intel_pch_thermal(E) i2c_smbus(E) cfbcopyarea(E) video(E) button(E) efivarfs(E) autofs4(E) [ 4070.575549] ---[ end trace 0000000000000000 ]--- v3: fix incorrect syntax of spin_lock() replacing spin_lock_irqsave() v2: irqsave not required in a worker, neither conversion to irq safe elsewhere (Tvrtko), - perf: it's safe to call gen8_configure_context() even if context has been closed, no need to check, - drop unrelated cleanup (Andi, Tvrtko) Reported-by:
Mark Janes <mark.janes@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/6222
References: a4e7ccda ("drm/i915: Move context management under GEM")
Fixes: f8246cf4 ("drm/i915/gem: Drop free_work for GEM contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916092403.201355-3-janusz.krzysztofik@linux.intel.com
(cherry picked from commit ad3aa7c3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[janusz: backport]
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Nadav Amit authored
commit efd608fa upstream. I encountered some occasional crashes of poke_int3_handler() when kprobes are set, while accessing desc->vec. The text poke mechanism claims to have an RCU-like behavior, but it does not appear that there is any quiescent state to ensure that nobody holds reference to desc. As a result, the following race appears to be possible, which can lead to memory corruption. CPU0 CPU1 ---- ---- text_poke_bp_batch() -> smp_store_release(&bp_desc, &desc) [ notice that desc is on the stack ] poke_int3_handler() [ int3 might be kprobe's so sync events are do not help ] -> try_get_desc(descp=&bp_desc) desc = __READ_ONCE(bp_desc) if (!desc) [false, success] WRITE_ONCE(bp_desc, NULL); atomic_dec_and_test(&desc.refs) [ success, desc space on the stack is being reused and might have non-zero value. ] arch_atomic_inc_not_zero(&desc->refs) [ might succeed since desc points to stack memory that was freed and might be reused. ] Fix this issue with small backportable patch. Instead of trying to make RCU-like behavior for bp_desc, just eliminate the unnecessary level of indirection of bp_desc, and hold the whole descriptor as a global. Anyhow, there is only a single descriptor at any given moment. Fixes: 1f676247 ("x86/alternatives: Implement a better poke_int3_handler() completion scheme") Signed-off-by:
Nadav Amit <namit@vmware.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20220920224743.3089-1-namit@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Jim Mattson authored
[ Upstream commit aae2e722 ] The only thing reported by CPUID.9 is the value of IA32_PLATFORM_DCA_CAP[31:0] in EAX. This MSR doesn't even exist in the guest, since CPUID.1:ECX.DCA[bit 18] is clear in the guest. Clear CPUID.9 in KVM_GET_SUPPORTED_CPUID. Fixes: 24c82e57 ("KVM: Sanitize cpuid") Signed-off-by:
Jim Mattson <jmattson@google.com>
Message-Id: <20220922231854.249383-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Florian Fainelli authored
[ Upstream commit 1b24a132 ] After commit 31fd9b79 ("ARM: dts: BCM5301X: update CRU block description") a warning from clk-iproc-pll.c was generated due to a duplicate PLL name as well as the console stopped working. Upon closer inspection it became clear that iproc_pll_clk_setup() used the Device Tree node unit name as an unique identifier as well as a parent name to parent all clocks under the PLL. BCM5301X was the first platform on which that got noticed because of the DT node unit name renaming but the same assumptions hold true for any user of the iproc_pll_clk_setup() function. The first 'clock-output-names' property is always guaranteed to be unique as well as providing the actual desired PLL clock name, so we utilize that to register the PLL and as a parent name of all children clock. Fixes: 5fe225c1 ("clk: iproc: add initial common clock support") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20220905161504.1526-1-f.fainelli@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Han Xu authored
[ Upstream commit b1ff1bfe ] There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag should not be used. For instance, the default parent clock for QSPI is pll2_bus, which is also the parent clock for quite a few modules, such as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system hang due to pll2_bus rate changed. Fixes: f1541e15 ("clk: imx6sx: Switch to clk_hw based API") Signed-off-by:
Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/20220915150959.3646702-1-han.xu@nxp.com
Tested-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Stefan Roesch authored
[ Upstream commit 1a91794c ] This splits of the setup part of the function setxattr in its own dedicated function called setxattr_copy. In addition it also exposes a new function called do_setxattr for making the setxattr call. This makes it possible to call these two functions from io_uring in the processing of an xattr request. Signed-off-by:
Stefan Roesch <shr@fb.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20220323154420.3301504-2-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 06bbaa6d ("[coredump] don't use __kernel_write() on kmap_local_page()")
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Angus Chen authored
[ Upstream commit db5db1a0 ] The q_pair_id to address a queue pair in the lm bar should be calculated by queue_id / 2 rather than queue_id / nr_vring. Fixes: 2ddae773 ("vDPA/ifcvf: detect and use the onboard number of queues directly") Signed-off-by:
Angus Chen <angus.chen@jaguarmicro.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20220923091013.191-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Wang Yufen authored
[ Upstream commit bc7a3198 ] The socket 2 bind the addr in use, bind should fail with EADDRINUSE. So if bind success or errno != EADDRINUSE, testcase should be failed. Fixes: 3ca8e402 ("soreuseport: BPF selection functional test") Signed-off-by:
Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1663916557-10730-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Lukas Wunner authored
[ Upstream commit ea64cdfa ] Commit 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") introduced a WARN() on resume from system sleep if a PHY is not in PHY_HALTED state. Commit 6dbe852c ("net: phy: Don't WARN for PHY_READY state in mdio_bus_phy_resume()") added an exemption for PHY_READY state from the WARN(). It turns out PHY_UP state needs to be exempted as well because the following may happen on suspend: mdio_bus_phy_suspend() phy_stop_machine() phydev->state = PHY_UP # if (phydev->state >= PHY_UP) Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/netdev/2b1a1588-505e-dff3-301d-bfc1fb14d685@samsung.com/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/8128fdb51eeebc9efbf3776a4097363a1317aaf1.1663905575.git.lukas@wunner.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Junxiao Chang authored
[ Upstream commit 49725ffc ] This commit fixes DMA engine reset timeout issue in suspend/resume with ADLink I-Pi SMARC Plus board which dmesg shows: ... [ 54.678271] PM: suspend exit [ 54.754066] intel-eth-pci 0000:00:1d.2 enp0s29f2: PHY [stmmac-3:01] driver [Maxlinear Ethernet GPY215B] (irq=POLL) [ 54.755808] intel-eth-pci 0000:00:1d.2 enp0s29f2: Register MEM_TYPE_PAGE_POOL RxQ-0 ... [ 54.780482] intel-eth-pci 0000:00:1d.2 enp0s29f2: Register MEM_TYPE_PAGE_POOL RxQ-7 [ 55.784098] intel-eth-pci 0000:00:1d.2: Failed to reset the dma [ 55.784111] intel-eth-pci 0000:00:1d.2 enp0s29f2: stmmac_hw_setup: DMA engine initialization failed [ 55.784115] intel-eth-pci 0000:00:1d.2 enp0s29f2: stmmac_open: Hw setup failed ... The issue is related with serdes which impacts clock. There is serdes in ADLink I-Pi SMARC board ethernet controller. Please refer to commit b9663b7c ("net: stmmac: Enable SERDES power up/down sequence") for detial. When issue is reproduced, DMA engine clock is not ready because serdes is not powered up. To reproduce DMA engine reset timeout issue with hardware which has serdes in GBE controller, install Ubuntu. In Ubuntu GUI, click "Power Off/Log Out" -> "Suspend" menu, it disables network interface, then goes to sleep mode. When it wakes up, it enables network interface again. Stmmac driver is called in this way: 1. stmmac_release: Stop network interface. In this function, it disables DMA engine and network interface; 2. stmmac_suspend: It is called in kernel suspend flow. But because network interface has been disabled(netif_running(ndev) is false), it does nothing and returns directly; 3. System goes into S3 or S0ix state. Some time later, system is waken up by keyboard or mouse; 4. stmmac_resume: It does nothing because network interface has been disabled; 5. stmmac_open: It is called to enable network interace again. DMA engine is initialized in this API, but serdes is not power on so there will be DMA engine reset timeout issue. Similarly, serdes powerdown should be added in stmmac_release. Network interface might be disabled by cmd "ifconfig eth0 down", DMA engine, phy and mac have been disabled in ndo_stop callback, serdes should be powered down as well. It doesn't make sense that serdes is on while other components have been turned off. If ethernet interface is in enabled state(netif_running(ndev) is true) before suspend/resume, the issue couldn't be reproduced because serdes could be powered up in stmmac_resume. Because serdes_powerup is added in stmmac_open, it doesn't need to be called in probe function. Fixes: b9663b7c ("net: stmmac: Enable SERDES power up/down sequence") Signed-off-by:
Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
Tested-by: Jimmy JS Chen <jimmyjs.chen@adlinktech.com>
Tested-by: Looi, Hong Aun <hong.aun.looi@intel.com>
Link: https://lore.kernel.org/r/20220923050448.1220250-1-junxiao.chang@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Hans de Goede authored
[ Upstream commit d873697e ] Commit 10cb8e61 ("mac80211: enable QoS support for nl80211 ctrl port") changed ieee80211_tx_control_port() to aways call __ieee80211_select_queue() without checking local->hw.queues. __ieee80211_select_queue() returns a queue-id between 0 and 3, which means that now ieee80211_tx_control_port() may end up setting the queue-mapping for a skb to a value higher then local->hw.queues if local->hw.queues is less then 4. Specifically this is a problem for ralink rt2500-pci cards where local->hw.queues is 2. There this causes rt2x00queue_get_tx_queue() to return NULL and the following error to be logged: "ieee80211 phy0: rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2", after which association with the AP fails. Other callers of __ieee80211_select_queue() skip calling it when local->hw.queues < IEEE80211_NUM_ACS, add the same check to ieee80211_tx_control_port(). This fixes ralink rt2500-pci and similar cards when less then 4 tx-queues no longer working. Fixes: 10cb8e61 ("mac80211: enable QoS support for nl80211 ctrl port") Cc: Markus Theil <markus.theil@tu-ilmenau.de> Suggested-by:
Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220918192052.443529-1-hdegoede@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Michael Kelley authored
[ Upstream commit c292a337 ] The IOC_PR_CLEAR and IOC_PR_RELEASE ioctls are non-functional on NVMe devices because the nvme_pr_clear() and nvme_pr_release() functions set the IEKEY field incorrectly. The IEKEY field should be set only when the key is zero (i.e, not specified). The current code does it backwards. Furthermore, the NVMe spec describes the persistent reservation "clear" function as an option on the reservation release command. The current implementation of nvme_pr_clear() erroneously uses the reservation register command. Fix these errors. Note that NVMe version 1.3 and later specify that setting the IEKEY field will return an error of Invalid Field in Command. The fix will set IEKEY when the key is zero, which is appropriate as these ioctls consider a zero key to be "unspecified", and the intention of the spec change is to require a valid key. Tested on a version 1.4 PCI NVMe device in an Azure VM. Fixes: 1673f1f0 ("nvme: move block_device_operations and ns/ctrl freeing to common code") Fixes: 1d277a63 ("NVMe: Add persistent reservation ops") Signed-off-by:
Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Peng Wu authored
[ Upstream commit 4774db8d ] The devm_ioremap() function returns NULL on error, it doesn't return error pointers. Fixes: 3a1a274e ("mlxbf_gige: compute MDIO period based on i1clk") Signed-off-by:
Peng Wu <wupeng58@huawei.com>
Link: https://lore.kernel.org/r/20220923023640.116057-1-wupeng58@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Rafael Mendonca authored
[ Upstream commit c635ebe8 ] The label passed to the QDESC_GET for the ETHOFLD TXQ, RXQ, and FLQ, is the 'out' one, which skips the 'out_unlock' label, and thus doesn't unlock the 'uld_mutex' before returning. Additionally, since commit 5148e595 ("cxgb4: add EOTID tracking and software context dump"), the access to these ETHOFLD hardware queues should be protected by the 'mqprio_mutex' instead. Fixes: 2d0cb84d ("cxgb4: add ETHOFLD hardware queue support") Fixes: 5148e595 ("cxgb4: add EOTID tracking and software context dump") Signed-off-by:
Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Link: https://lore.kernel.org/r/20220922175109.764898-1-rafaelmendsr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Hangyu Hua authored
[ Upstream commit 6e23ec0b ] nf_ct_put need to be called to put the refcount got by tcf_ct_fill_params to avoid possible refcount leak when tcf_ct_flow_table_get fails. Fixes: c34b961a ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220923020046.8021-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Peilin Ye authored
[ Upstream commit a4320615 ] Currently usbnet_disconnect() unanchors and frees all deferred URBs using usb_scuttle_anchored_urbs(), which does not free urb->context, causing a memory leak as reported by syzbot. Use a usb_get_from_anchor() while loop instead, similar to what we did in commit 19cfe912 ("Bluetooth: btusb: Fix memory leak in play_deferred"). Also free urb->sg. Reported-and-tested-by:
<syzbot+dcd3e13cf4472f2e0ba1@syzkaller.appspotmail.com>
Fixes: 69ee472f ("usbnet & cdc-ether: Autosuspend for online devices")
Fixes: 638c5115 ("USBNET: support DMA SG")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/20220923042551.2745-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Pali Rohár authored
[ Upstream commit 4335417d ] pwm support incompatible with Armada 80x0/70x0 API is not only in Armada 370, but also in Armada XP, 38x and 39x. So basically every non-A8K platform. Fix check for pwm support appropriately. Fixes: 85b7d8ab ("gpio: mvebu: add pwm support for Armada 8K/7K") Signed-off-by:
Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Yang Yingliang authored
[ Upstream commit a54dc27b ] devm_gpiod_get_optional() may return ERR_PTR(-EPROBE_DEFER), add a minus sign to fix it. Fixes: 6ccb1d8f ("Input: add MELFAS MIP4 Touchscreen driver") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220924030715.1653538-1-yangyingliang@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Brian Norris authored
[ Upstream commit cc62d98b ] This reverts commit 211f276e. For quite some time, core DRM helpers already ensure that any relevant connectors/CRTCs/etc. are disabled, as well as their associated components (e.g., bridges) when suspending the system. Thus, analogix_dp_bridge_{enable,disable}() already get called, which in turn call drm_panel_{prepare,unprepare}(). This makes these drm_panel_*() calls redundant. Besides redundancy, there are a few problems with this handling: (1) drm_panel_{prepare,unprepare}() are *not* reference-counted APIs and are not in general designed to be handled by multiple callers -- although some panel drivers have a coarse 'prepared' flag that mitigates some damage, at least. So at a minimum this is redundant and confusing, but in some cases, this could be actively harmful. (2) The error-handling is a bit non-standard. We ignored errors in suspend(), but handled errors in resume(). And recently, people noticed that the clk handling is unbalanced in error paths, and getting *that* right is not actually trivial, given the current way errors are mostly ignored. (3) In the particular way analogix_dp_{suspend,resume}() get used (e.g., in rockchip_dp_*(), as a late/early callback), we don't necessarily have a proper PM relationship between the DP/bridge device and the panel device. So while the DP bridge gets resumed, the panel's parent device (e.g., platform_device) may still be suspended, and so any prepare() calls may fail. So remove the superfluous, possibly-harmful suspend()/resume() handling of panel state. Fixes: 211f276e ("drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time") Link: https://lore.kernel.org/all/Yv2CPBD3Picg%2FgVe@google.com/ Signed-off-by:
Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220822180729.1.I8ac5abe3a4c1c6fd5c061686c6e883c22f69022c@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Francesco Dolcini authored
[ Upstream commit 051ad278 ] Correct I2C address for the register list in lt8912_write_lvds_config(), these registers are on the first I2C address (0x48), the current function is just writing garbage to the wrong registers and this creates multiple issues (artifacts and output completely corrupted) on some HDMI displays. Correct I2C address comes from Lontium documentation and it is the one used on other out-of-tree LT8912B drivers [1]. [1] https://github.com/boundarydevices/linux/blob/boundary-imx_5.10.x_2.0.0/drivers/video/lt8912.c#L296 Fixes: 30e2ae94 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-4-dev@pschenker.ch
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Philippe Schenker authored
[ Upstream commit 6dd1de12 ] The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads from EDID what the display needs and sets it accordingly. Fixes: 30e2ae94 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by:
Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-3-dev@pschenker.ch
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Philippe Schenker authored
[ Upstream commit da73a94f ] Currently the bridge driver does not take care whether or not the display needs positive/negative vertical/horizontal syncs. Pass these two flags to the bridge from the EDID that was read out from the display. Fixes: 30e2ae94 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by:
Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-2-dev@pschenker.ch
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Martin Povišer authored
[ Upstream commit 0a0342ed ] On probe of the ASoC component, the device is reset but the regcache is retained. This means the regcache gets out of sync if the codec is rebound to a sound card for a second time. Fix it by reinitializing the regcache to defaults after the device is reset. Fixes: b0bcbe61 ("ASoC: tas2770: Fix calling reset in probe") Signed-off-by:
Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220919173453.84292-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Johan Hovold authored
[ Upstream commit 40e95419 ] The size of the UFS PHY serdes register region is 0x1c4 and the corresponding 'reg' property should specifically not include the adjacent regions that are defined in the child node (e.g. tx and rx). Fixes: 59c7cf81 ("arm64: dts: qcom: sm8350: Add UFS nodes") Signed-off-by:
Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220916093603.24263-1-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Shengjiu Wang authored
[ Upstream commit d56ba9a0 ] imx_card_parse_of will search all the node with loop, if there is defer probe happen in the middle of loop, the previous released codec node will be released twice, then cause refcount issue. Here assign NULL to pointer of released nodes to fix the issue. Fixes: aa736700 ("ASoC: imx-card: Add imx-card machine driver") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1663059601-29259-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Samuel Holland authored
[ Upstream commit e3c95edb ] The labels were backward with respect to the register values. The SRAM is mapped to the CPU when the register value is 1. Fixes: 5e4fb642 ("drivers: soc: sunxi: add support for A64 and its SRAM C") Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-7-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Samuel Holland authored
[ Upstream commit 49fad91a ] Errors from debugfs are intended to be non-fatal, and should not prevent the driver from probing. Since debugfs file creation is treated as infallible, move it below the parts of the probe function that can fail. This prevents an error elsewhere in the probe function from causing the file to leak. Do the same for the call to of_platform_populate(). Finally, checkpatch suggests an octal literal for the file permissions. Fixes: 4af34b57 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs") Fixes: 5828729b ("soc: sunxi: export a regmap for EMAC clock reg on A64") Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-6-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Cai Huoqing authored
[ Upstream commit 1f3753a5 ] Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210908071716.772-1-caihuoqing@baidu.com
Stable-dep-of: 49fad91a ("soc: sunxi: sram: Fix probe function ordering issues")
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Samuel Holland authored
[ Upstream commit 90e10a1f ] This driver exports a regmap tied to the platform device (as opposed to a syscon, which exports a regmap tied to the OF node). Because of this, the driver can never be unbound, as that would destroy the regmap. Use builtin_platform_driver_probe() to enforce this limitation. Fixes: 5828729b ("soc: sunxi: export a regmap for EMAC clock reg on A64") Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-5-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Samuel Holland authored
[ Upstream commit fd362baa ] sunxi_sram_claim() checks the sram_desc->claimed flag before updating the register, with the intent that only one device can claim a region. However, this was ineffective because the flag was never set. Fixes: 4af34b57 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs") Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-4-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Romain Naour authored
[ Upstream commit 6a6d9ecf ] Commit bcbb63b8 ("ARM: dts: dra7: Separate AM57 dtsi files") disabled usb4_tm for am5748 devices since USB4 IP is not present in this SoC. The commit log explained the difference between AM5 and DRA7 families: AM5 and DRA7 SoC families have different set of modules in them so the SoC sepecific dtsi files need to be separated. e.g. Some of the major differences between AM576 and DRA76 DRA76x AM576x USB3 x USB4 x ATL x VCP x MLB x ISS x PRU-ICSS1 x PRU-ICSS2 x Then commit 176f26bc ("ARM: dts: Add support for dra762 abz package") removed usb4_tm part from am5748.dtsi and introcuded new ti-sysc errors in dmesg: ti-sysc 48940000.target-module: clock get error for fck: -2 ti-sysc: probe of 48940000.target-module failed with error -2 Fixes: 176f26bc ("ARM: dts: Add support for dra762 abz package") Signed-off-by:
Romain Naour <romain.naour@skf.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Message-Id: <20220823072742.351368-1-romain.naour@smile.fr>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Richard Zhu authored
[ Upstream commit 051d9eb4 ] On i.MX7/iMX8MM/iMX8MQ, the initialized default value of PERST bit(BIT3) of SRC_PCIEPHY_RCR is 1b'1. But i.MX8MP has one inversed default value 1b'0 of PERST bit. And the PERST bit should be kept 1b'1 after power and clocks are stable. So fix the i.MX8MP PCIe PHY PERST support here. Fixes: e08672c0 ("reset: imx7: Add support for i.MX8MP SoC") Signed-off-by:
Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/1661845564-11373-5-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org> -
YuTong Chang authored
[ Upstream commit 2eb502f4 ] According to technical manual(table 11-24), the DMA of MMCHS0 should be direct mapped. Fixes: b5e50906 ("ARM: DTS: am33xx: Use the new DT bindings for the eDMA3") Signed-off-by:
YuTong Chang <mtwget@gmail.com>
Message-Id: <20220620124146.5330-1-mtwget@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Tianyu Lan authored
commit 82806744 upstream. swiotlb_find_slots() skips slots according to io tlb aligned mask calculated from min aligned mask and original physical address offset. This affects max mapping size. The mapping size can't achieve the IO_TLB_SEGSIZE * IO_TLB_SIZE when original offset is non-zero. This will cause system boot up failure in Hyper-V Isolation VM where swiotlb force is enabled. Scsi layer use return value of dma_max_mapping_size() to set max segment size and it finally calls swiotlb_max_mapping_size(). Hyper-V storage driver sets min align mask to 4k - 1. Scsi layer may pass 256k length of request buffer with 0~4k offset and Hyper-V storage driver can't get swiotlb bounce buffer via DMA API. Swiotlb_find_slots() can't find 256k length bounce buffer with offset. Make swiotlb_max_mapping _size() take min align mask into account. Signed-off-by:
Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Hans Verkuil authored
commit 4e768c8e upstream. The v4l2_compat_get_array_args() function can leave uninitialized memory in the buffer it is passed. So zero it before copying array elements from userspace into the buffer. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: <syzbot+ff18193ff05f3f87f226@syzkaller.appspotmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Nicolas Dufresne authoredcommit 3a99c447 upstream. Quite often, the HW get stuck in error condition if a stream error was detected. As documented, the HW should stop immediately and self reset. There is likely a problem or a miss-understanding of the self reset mechanism, as unless we make a long pause, the next command will then report an error even if there is no error in it. Disabling error detection fixes the issue, and let the decoder continue after an error. This patch is safe for backport into older kernels. Fixes: cd33c830 ("media: rkvdec: Add the rkvdec driver") Signed-off-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Hangyu Hua authored
commit 37238699 upstream. vb2_core_qbuf and vb2_core_querybuf don't check the range of b->index controlled by the user. Fix this by adding range checking code before using them. Fixes: 57868acc ("media: videobuf2: Add new uAPI for DVB streaming I/O") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Shuai Xue authored
commit 77677cdb upstream. The GHES code calls memory_failure_queue() from IRQ context to queue work into workqueue and schedule it on the current CPU. Then the work is processed in memory_failure_work_func() by kworker and calls memory_failure(). When a page is already poisoned, commit a3f5d80e ("mm,hwpoison: send SIGBUS with error virutal address") make memory_failure() call kill_accessing_process() that: - holds mmap locking of current->mm - does pagetable walk to find the error virtual address - and sends SIGBUS to the current process with error info. However, the mm of kworker is not valid, resulting in a null-pointer dereference. So check mm when killing the accessing process. [akpm@linux-foundation.org: remove unrelated whitespace alteration] Link: https://lkml.kernel.org/r/20220914064935.7851-1-xueshuai@linux.alibaba.com Fixes: a3f5d80e ("mm,hwpoison: send SIGBUS with error virutal address") Signed-off-by:
Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Bixuan Cui <cuibixuan@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Minchan Kim authored
commit 58d426a7 upstream. MADV_PAGEOUT tries to isolate non-LRU pages and gets a warning from isolate_lru_page below. Fix it by checking PageLRU in advance. ------------[ cut here ]------------ trying to isolate tail page WARNING: CPU: 0 PID: 6175 at mm/folio-compat.c:158 isolate_lru_page+0x130/0x140 Modules linked in: CPU: 0 PID: 6175 Comm: syz-executor.0 Not tainted 5.18.12 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:isolate_lru_page+0x130/0x140 Link: https://lore.kernel.org/linux-mm/485f8c33.2471b.182d5726afb.Coremail.hantianshuo@iie.ac.cn/ Link: https://lkml.kernel.org/r/20220908151204.762596-1-minchan@kernel.org Fixes: 1a4e58cc ("mm: introduce MADV_PAGEOUT") Signed-off-by:
Minchan Kim <minchan@kernel.org>
Reported-by: 韩天ç` <hantianshuo@iie.ac.cn>
Suggested-by: Yang Shi <shy828301@gmail.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-