Merge tag 'drm-misc-next-2020-02-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.7:

UAPI Changes:
  - lima: Add support for heap buffers

Cross-subsystem Changes:

Core Changes:
  - Implement mode_config mode_valid for memory constrained drivers
  - Bus format negociation between bridges
  - Consolidate fake vblank events for drivers without vblank interrupts
  - drm/bufs: dma_alloc related cleanups
  - drm/dp_mst: Various fixes
  - drm/print: New drm_device based print helpers
  - Thomas is a drm-misc maintainer now!

Driver Changes:
  - DPMS cleanups for atomic drivers
  - Removal of owner field in SPI tinydrm drivers
  - Removal of explicit dependency on DT for tinydrm drivers
  - Conversion to YAML schemas for DT bindings
  - tidss: New driver
  - virtio: various reworks and fixes
  - Our usual dozen or so new panels or bridges

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210093421.xu4sofldm6wm6xq6@gilmour.lan

Documentation/devicetree/bindings/display/bridge/ps8640.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ps8640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DSI to eDP Video Format Converter Device Tree Bindings
+
+maintainers:
+  - Nicolas Boichat <drinkcat@chromium.org>
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+description: |
+  The PS8640 is a low power MIPI-to-eDP video format converter supporting
+  mobile devices with embedded panel resolutions up to 2048 x 1536. The
+  device accepts a single channel of MIPI DSI v1.1, with up to four lanes
+  plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The
+  device outputs eDP v1.4, one or two lanes, at a link rate of up to
+  3.24Gbit/sec per lane.
+
+properties:
+  compatible:
+    const: parade,ps8640
+
+  reg:
+    maxItems: 1
+    description: Base I2C address of the device.
+
+  powerdown-gpios:
+    maxItems: 1
+    description: GPIO connected to active low powerdown.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low reset.
+
+  vdd12-supply:
+    maxItems: 1
+    description: Regulator for 1.2V digital core power.
+
+  vdd33-supply:
+    maxItems: 1
+    description: Regulator for 3.3V digital core power.
+
+  ports:
+    type: object
+    description:
+      A node containing DSI input & output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+      Documentation/devicetree/bindings/graph.txt
+    properties:
+      port@0:
+        type: object
+        description: |
+          Video port for DSI input
+
+      port@1:
+        type: object
+        description: |
+          Video port for eDP output (panel or connector).
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - powerdown-gpios
+  - reset-gpios
+  - vdd12-supply
+  - vdd33-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ps8640: edp-bridge@18 {
+            compatible = "parade,ps8640";
+            reg = <0x18>;
+            powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
+            vdd12-supply = <&ps8640_fixed_1v2>;
+            vdd33-supply = <&mt6397_vgp2_reg>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    ps8640_in: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    ps8640_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                   };
+                };
+            };
+        };
+    };
+

Documentation/devicetree/bindings/display/ilitek,ili9486.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ilitek,ili9486.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9486 display panels device tree bindings
+
+maintainers:
+  - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
+
+description:
+  This binding is for display panels using an Ilitek ILI9486 controller in SPI
+  mode.
+
+allOf:
+  - $ref: panel/panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # Waveshare 3.5" 320x480 Color TFT LCD
+        - waveshare,rpi-lcd-35
+          # Ozzmaker 3.5" 320x480 Color TFT LCD
+        - ozzmaker,piscreen
+      - const: ilitek,ili9486
+
+  spi-max-frequency:
+    maximum: 32000000
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+  backlight: true
+  reg: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight: backlight {
+            compatible = "gpio-backlight";
+            gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+
+            display@0{
+                    compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+                    rotation = <180>;
+                    backlight = <&backlight>;
+            };
+    };
+
+...

Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt

-AU Optronics Corporation 8.0" WUXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b101ean01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt

-AU Optronics Corporation 10.1" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b101aw03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt

-AU Optronics Corporation 10.1" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b101ean01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt

-AU Optronics Corporation 10.1" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b101xtn01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt

-AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
-
-Required properties:
-- compatible: should be "auo,b116xw03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt

-AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
-
-Required properties:
-- compatible: should be "auo,b133htn01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt

-AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b133xtn01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt

-AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g070vvn01"
-- backlight: phandle of the backlight device attached to the panel
-- power-supply: single regulator to provide the supply voltage
-
-Required nodes:
-- port: Parallel port mapping to connect this display
-
-This panel needs single power supply voltage. Its backlight is conntrolled
-via PWM signal.
-
-Example:
---------
-
-Example device-tree definition when connected to iMX6Q based board
-
-	lcd_panel: lcd-panel {
-		compatible = "auo,g070vvn01";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_display>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};

Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt

-AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g101evn010"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt

-AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g104sn02"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,g133han01.txt

-AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g133han01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,g185han01.txt

-AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g185han01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt

-AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,p320hvn03"
-- power-supply: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,t215hvn01.txt

-AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,t215hvn01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt

-Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
-
-Required properties:
-- compatible: should be "avic,tm070ddh03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt

-BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "boe,hv070wsa-100"
-- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
-- enable-gpios: GPIO pin to enable and disable panel (active high)
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [1]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	panel: panel {
-		compatible = "boe,hv070wsa-100";
-		power-supply = <&vcc_3v3_reg>;
-		enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
-		port {
-			panel_ep: endpoint {
-				remote-endpoint = <&bridge_out_ep>;
-			};
-		};
-	};

Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt

-BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "boe,nv101wxmn51"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt

-Boe Corporation 8.0" WUXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "boe,tv080wum-nl0"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.