Merge tag 'arm-soc-imx-move' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Consolidate i.MX 5 platforms to be under the new shared i.MX 3/5/6 tree.

* tag 'arm-soc-imx-move' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM i.MX: Update defconfig
  ARM i.MX: Merge i.MX5 support into mach-imx
  ARM i.MX5: remove unnecessary includes from board files

Fix up fairly trivial conflicts due to various changes nearby in
arch/arm/{mach,plat}-imx/{Kconfig,Makefile}

Pull request had been sent to the wrong email address, but happened
before the merge window closed.  I'm merging the MX 5 consolidation,
since it apparently will help the next development window and will avoid
conflicts later as per Arnd.

arch/arm/Makefile

@@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
 machine-$(CONFIG_ARCH_IMX_V6_V7)	:= imx
-machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik

arch/arm/configs/mx5_defconfig → arch/arm/configs/imx_v6_v7_defconfig

@@ -3,6 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUPS=y
 CONFIG_RELAY=y
 CONFIG_EXPERT=y
 # CONFIG_SLUB_DEBUG is not set
@@ -14,20 +15,31 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
-CONFIG_MACH_MX51_BABBAGE=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX35=y
+CONFIG_MACH_VPR200=y
+CONFIG_MACH_IMX51_DT=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
 CONFIG_MACH_MX51_EFIKAMX=y
 CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_MX53_EVK=y
-CONFIG_MACH_MX53_SMD=y
-CONFIG_MACH_MX53_LOCO=y
-CONFIG_MACH_MX53_ARD=y
+CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX6Q=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
@@ -49,7 +61,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -68,24 +80,20 @@ CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_ATA=y
 CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
-CONFIG_MII=m
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+CONFIG_FEC=y
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=y
+CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
@@ -124,7 +132,6 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
-CONFIG_MMC_BLOCK=m
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
@@ -133,6 +140,8 @@ CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y

arch/arm/configs/mx3_defconfig

-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX31ADS_WM1133_EV1=y
-CONFIG_MACH_MX31LILLY=y
-CONFIG_MACH_MX31LITE=y
-CONFIG_MACH_PCM037=y
-CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31_3DS=y
-CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_QONG=y
-CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_KZM_ARM11_01=y
-CONFIG_MACH_PCM043=y
-CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX35=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MXC_PWM=y
-CONFIG_ARM_ERRATA_411920=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_VFP=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-# CONFIG_BLK_DEV is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_AT24=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_DNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_IMX=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_IMX2_WDT=y
-CONFIG_MFD_WM8350_I2C=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_WM8350=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_RC_CORE is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9M001=y
-CONFIG_SOC_CAMERA_MT9M111=y
-CONFIG_SOC_CAMERA_MT9T031=y
-CONFIG_SOC_CAMERA_MT9V022=y
-CONFIG_SOC_CAMERA_TW9910=y
-CONFIG_SOC_CAMERA_OV772X=y
-CONFIG_VIDEO_MX3=y
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_IMX_SOC=y
-CONFIG_SND_MXC_SOC_WM1133_EV1=y
-CONFIG_SND_SOC_PHYCORE_AC97=y
-CONFIG_SND_SOC_EUKREA_TLV320=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_GADGET=m
-CONFIG_USB_FSL_USB2=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MXC=y
-CONFIG_DMADEVICES=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/arm/mach-imx/Kconfig

@@ -22,6 +22,18 @@ config ARCH_MX25
 config MACH_MX27
 	bool
 
+config ARCH_MX5
+	bool
+
+config ARCH_MX50
+	bool
+
+config ARCH_MX51
+	bool
+
+config ARCH_MX53
+	bool
+
 config SOC_IMX1
 	bool
 	select ARCH_MX1
@@ -73,6 +85,32 @@ config SOC_IMX35
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
+config SOC_IMX5
+	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
+	select MXC_TZIC
+	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_HAS_CPUFREQ
+	select ARCH_MX5
+	bool
+
+config SOC_IMX50
+	bool
+	select SOC_IMX5
+	select ARCH_MX50
+
+config	SOC_IMX51
+	bool
+	select SOC_IMX5
+	select ARCH_MX5
+	select ARCH_MX51
+
+config	SOC_IMX53
+	bool
+	select SOC_IMX5
+	select ARCH_MX5
+	select ARCH_MX53
 
 if ARCH_IMX_V4_V5
 
@@ -592,6 +630,207 @@ config MACH_VPR200
 	  Include support for VPR200 platform. This includes specific
 	  configurations for the board and its peripherals.
 
+comment "i.MX5 platforms:"
+
+config MACH_MX50_RDP
+	bool "Support MX50 reference design platform"
+	depends on BROKEN
+	select SOC_IMX50
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for MX50 reference design platform (RDP) board. This
+	  includes specific configurations for the board and its peripherals.
+
+comment "i.MX51 machines:"
+
+config MACH_IMX51_DT
+	bool "Support i.MX51 platforms from device tree"
+	select SOC_IMX51
+	select USE_OF
+	select MACH_MX51_BABBAGE
+	help
+	  Include support for Freescale i.MX51 based platforms
+	  using the device tree for discovery
+
+config MACH_MX51_BABBAGE
+	bool "Support MX51 BABBAGE platforms"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for MX51 Babbage platform, also known as MX51EVK in
+	  u-boot. This includes specific configurations for the board and its
+	  peripherals.
+
+config MACH_MX51_3DS
+	bool "Support MX51PDK (3DS)"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_DEBUG_BOARD
+	help
+	  Include support for MX51PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX51
+	bool "Support Eukrea CPUIMX51 module"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for Eukrea CPUIMX51 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51
+	default MACH_EUKREA_MBIMX51_BASEBOARD
+
+config MACH_EUKREA_MBIMX51_BASEBOARD
+	prompt "Eukrea MBIMX51 development board"
+	bool
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX51 evaluation board.
+
+endchoice
+
+config MACH_EUKREA_CPUIMX51SD
+	bool "Support Eukrea CPUIMX51SD module"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for Eukrea CPUIMX51SD platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51SD
+	default MACH_EUKREA_MBIMXSD51_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD51_BASEBOARD
+	prompt "Eukrea MBIMXSD development board"
+	bool
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+config MX51_EFIKA_COMMON
+	bool
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_PATA_IMX
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+
+config MACH_MX51_EFIKAMX
+	bool "Support MX51 Genesi Efika MX nettop"
+	select LEDS_GPIO_REGISTER
+	select MX51_EFIKA_COMMON
+	help
+	  Include support for Genesi Efika MX nettop. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX51_EFIKASB
+	bool "Support MX51 Genesi Efika Smartbook"
+	select LEDS_GPIO_REGISTER
+	select MX51_EFIKA_COMMON
+	help
+	  Include support for Genesi Efika Smartbook. This includes specific
+	  configurations for the board and its peripherals.
+
+comment "i.MX53 machines:"
+
+config MACH_IMX53_DT
+	bool "Support i.MX53 platforms from device tree"
+	select SOC_IMX53
+	select USE_OF
+	select MACH_MX53_ARD
+	select MACH_MX53_EVK
+	select MACH_MX53_LOCO
+	select MACH_MX53_SMD
+	help
+	  Include support for Freescale i.MX53 based platforms
+	  using the device tree for discovery
+
+config MACH_MX53_EVK
+	bool "Support MX53 EVK platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  Include support for MX53 EVK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX53_SMD
+	bool "Support MX53 SMD platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for MX53 SMD platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX53_LOCO
+	bool "Support MX53 LOCO platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select LEDS_GPIO_REGISTER
+	help
+	  Include support for MX53 LOCO platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX53_ARD
+	bool "Support MX53 ARD platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	help
+	  Include support for MX53 ARD platform. This includes specific
+	  configurations for the board and its peripherals.
+
 comment "i.MX6 family:"
 
 config SOC_IMX6Q

arch/arm/mach-imx/Makefile

@@ -11,6 +11,8 @@ obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
 
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
 
@@ -75,3 +77,22 @@ obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
 endif
+
+# i.MX5 based machines
+obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
+obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
+obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
+obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
+obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
+obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
+obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
+obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
+obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
+
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
+obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o

arch/arm/mach-imx/Makefile.boot

@@ -22,6 +22,18 @@ zreladdr-$(CONFIG_SOC_IMX35)	+= 0x80008000
 params_phys-$(CONFIG_SOC_IMX35)	:= 0x80000100
 initrd_phys-$(CONFIG_SOC_IMX35)	:= 0x80800000
 
+zreladdr-$(CONFIG_SOC_IMX50)	+= 0x70008000
+params_phys-$(CONFIG_SOC_IMX50)	:= 0x70000100
+initrd_phys-$(CONFIG_SOC_IMX50)	:= 0x70800000
+
+zreladdr-$(CONFIG_SOC_IMX51)	+= 0x90008000
+params_phys-$(CONFIG_SOC_IMX51)	:= 0x90000100
+initrd_phys-$(CONFIG_SOC_IMX51)	:= 0x90800000
+
+zreladdr-$(CONFIG_SOC_IMX53)	+= 0x70008000
+params_phys-$(CONFIG_SOC_IMX53)	:= 0x70000100
+initrd_phys-$(CONFIG_SOC_IMX53)	:= 0x70800000
+
 zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
 params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
 initrd_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10800000

arch/arm/mach-mx5/clock-mx51-mx53.c → arch/arm/mach-imx/clock-mx51-mx53.c

@@ -23,7 +23,7 @@
 #include <mach/common.h>
 #include <mach/clock.h>
 
-#include "crm_regs.h"
+#include "crm-regs-imx5.h"
 
 /* External clock values passed-in by the board code */
 static unsigned long external_high_reference, external_low_reference;