pc: Fix CMOS info for drives defined with -device

Drives defined with -drive if=ide get get created along with the IDE
controller, inside machine->init().  That's before cmos_init().
Drives defined with -device get created during generic device init.
That's after cmos_init().  Because of that, CMOS has no information on
them (type, geometry, translation).  Older versions of Windows such as
XP reportedly choke on that.

Split off the part of CMOS initialization that needs to know about
-device devices, and turn it into a reset handler, so it runs after
device creation.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit c0897e0c)

hw/ide.h

@@ -23,4 +23,6 @@ void mmio_ide_init (target_phys_addr_t membase, target_phys_addr_t membase2,
                     qemu_irq irq, int shift,
                     DriveInfo *hd0, DriveInfo *hd1);
 
+void ide_get_bs(BlockDriverState *bs[], BusState *qbus);
+
 #endif /* HW_IDE_H */

hw/ide/qdev.c

@@ -90,6 +90,13 @@ IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive)
     return DO_UPCAST(IDEDevice, qdev, dev);
 }
 
+void ide_get_bs(BlockDriverState *bs[], BusState *qbus)
+{
+    IDEBus *bus = DO_UPCAST(IDEBus, qbus, qbus);
+    bs[0] = bus->master ? bus->master->dinfo->bdrv : NULL;
+    bs[1] = bus->slave  ? bus->slave->dinfo->bdrv  : NULL;
+}
+
 /* --------------------------------- */
 
 typedef struct IDEDrive {

hw/pc.c

@@ -24,6 +24,7 @@
 #include "hw.h"
 #include "pc.h"
 #include "fdc.h"
+#include "ide.h"
 #include "pci.h"
 #include "vmware_vga.h"
 #include "usb-uhci.h"
@@ -244,15 +245,66 @@ static int pc_boot_set(void *opaque, const char *boot_device)
     return(0);
 }
 
-/* hd_table must contain 4 block drivers */
+typedef struct pc_cmos_init_late_arg {
+    BusState *idebus0, *idebus1;
+} pc_cmos_init_late_arg;
+
+static void pc_cmos_init_late(void *opaque)
+{
+    pc_cmos_init_late_arg *arg = opaque;
+    RTCState *s = rtc_state;
+    int val;
+    BlockDriverState *hd_table[4];
+    int i;
+
+    ide_get_bs(hd_table, arg->idebus0);
+    ide_get_bs(hd_table + 2, arg->idebus1);
+
+    rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
+    if (hd_table[0])
+        cmos_init_hd(0x19, 0x1b, hd_table[0]);
+    if (hd_table[1])
+        cmos_init_hd(0x1a, 0x24, hd_table[1]);
+
+    val = 0;
+    for (i = 0; i < 4; i++) {
+        if (hd_table[i]) {
+            int cylinders, heads, sectors, translation;
+            /* NOTE: bdrv_get_geometry_hint() returns the physical
+                geometry.  It is always such that: 1 <= sects <= 63, 1
+                <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
+                geometry can be different if a translation is done. */
+            translation = bdrv_get_translation_hint(hd_table[i]);
+            if (translation == BIOS_ATA_TRANSLATION_AUTO) {
+                bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);
+                if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
+                    /* No translation. */
+                    translation = 0;
+                } else {
+                    /* LBA translation. */
+                    translation = 1;
+                }
+            } else {
+                translation--;
+            }
+            val |= translation << (i * 2);
+        }
+    }
+    rtc_set_memory(s, 0x39, val);
+
+    qemu_unregister_reset(pc_cmos_init_late, opaque);
+}
+
 static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
-                      const char *boot_device, DriveInfo **hd_table)
+                      const char *boot_device,
+                      BusState *idebus0, BusState *idebus1)
 {
     RTCState *s = rtc_state;
     int nbds, bds[3] = { 0, };
     int val;
     int fd0, fd1, nb;
     int i;
+    static pc_cmos_init_late_arg arg;
 
     /* various important CMOS locations needed by PC/Bochs bios */
 
@@ -335,37 +387,9 @@ static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
 
     /* hard drives */
 
-    rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
-    if (hd_table[0])
-        cmos_init_hd(0x19, 0x1b, hd_table[0]->bdrv);
-    if (hd_table[1])
-        cmos_init_hd(0x1a, 0x24, hd_table[1]->bdrv);
-
-    val = 0;
-    for (i = 0; i < 4; i++) {
-        if (hd_table[i]) {
-            int cylinders, heads, sectors, translation;
-            /* NOTE: bdrv_get_geometry_hint() returns the physical
-                geometry.  It is always such that: 1 <= sects <= 63, 1
-                <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
-                geometry can be different if a translation is done. */
-            translation = bdrv_get_translation_hint(hd_table[i]->bdrv);
-            if (translation == BIOS_ATA_TRANSLATION_AUTO) {
-                bdrv_get_geometry_hint(hd_table[i]->bdrv, &cylinders, &heads, &sectors);
-                if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
-                    /* No translation. */
-                    translation = 0;
-                } else {
-                    /* LBA translation. */
-                    translation = 1;
-                }
-            } else {
-                translation--;
-            }
-            val |= translation << (i * 2);
-        }
-    }
-    rtc_set_memory(s, 0x39, val);
+    arg.idebus0 = idebus0;
+    arg.idebus1 = idebus1;
+    qemu_register_reset(pc_cmos_init_late, &arg);
 }
 
 void ioport_set_a20(int enable)
@@ -994,6 +1018,7 @@ static void pc_init1(ram_addr_t ram_size,
     qemu_irq *i8259;
     IsaIrqState *isa_irq_state;
     DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
+    BusState *idebus[MAX_IDE_BUS];
     DriveInfo *fd[MAX_FD];
     void *fw_cfg;
 
@@ -1187,11 +1212,16 @@ static void pc_init1(ram_addr_t ram_size,
     }
 
     if (pci_enabled) {
-        pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
+        PCIDevice *dev;
+        dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
+        idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
+        idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
     } else {
         for(i = 0; i < MAX_IDE_BUS; i++) {
-            isa_ide_init(ide_iobase[i], ide_iobase2[i], ide_irq[i],
+            ISADevice *dev;
+            dev = isa_ide_init(ide_iobase[i], ide_iobase2[i], ide_irq[i],
                                hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
+            idebus[i] = qdev_get_child_bus(&dev->qdev, "ide.0");
         }
     }
 
@@ -1206,7 +1236,8 @@ static void pc_init1(ram_addr_t ram_size,
     }
     floppy_controller = fdctrl_init_isa(fd);
 
-    cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd);
+    cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device,
+              idebus[0], idebus[1]);
 
     if (pci_enabled && usb_enabled) {
         usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);