* Patch by Martin Krause, 27 May 2004:

  Fix a MPC5xxx I2C timing issue in i2c_probe().

* Patch by Leif Lindholm, 27 May 2004:
  Fix board_init_f() for dbau1x00 board.

CHANGELOG

@@ -2,6 +2,12 @@
 Changes since U-Boot 1.1.1:
 ======================================================================
 
+* Patch by Martin Krause, 27 May 2004:
+  Fix a MPC5xxx I2C timing issue in i2c_probe().
+
+* Patch by Leif Lindholm, 27 May 2004:
+  Fix board_init_f() for dbau1x00 board.
+
 * Patch by Imre Deak, 26 May 2004:
   On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
   Set flash base accordingly, and decide whether to do or skip board

board/dbau1x00/dbau1x00.c

@@ -104,17 +104,17 @@ int checkboard (void)
 		      CFG_PCMCIA_ATTR_BASE, /* Hi */
 		      0x3D000017,           /* Lo0 */
 		      0x3D200017);          /* Lo1 */
-#endif
+#endif	/* 0 */
 	write_one_tlb(22,                   /* index */
 		      0x01ffe000,           /* Pagemask, 16 MB pages */
 		      CFG_PCMCIA_MEM_ADDR,  /* Hi */
 		      0x3E000017,           /* Lo0 */
 		      0x3E200017);          /* Lo1 */
+#endif	/* CONFIG_IDE_PCMCIA */
 
 	/* Release reset of ethernet PHY chips */
 	/* Always do this, because linux does not know about it */
 	*phy = 3;
 
 	return 0;
-#endif
 }

cpu/mpc5xxx/i2c.c

@@ -285,6 +285,7 @@ int i2c_probe(uchar chip)
 
 		if (! do_address(chip, 0)) {
 			mpc_reg_out(&regs->mcr, 0, I2C_STA);
+			udelay(500);
 			break;
 		}